Effect of graphene oxide on the behavior of poly(amide‐6‐b‐ethylene oxide)/graphene oxide mixed‐matrix membranes in the permeation process

Polyether‐block‐amide (Pebax)/graphene oxide (GO) mixed‐matrix membranes (MMMs) were prepared with a solution casting method, and their gas‐separation performance and mechanical properties were investigated. Compared with the pristine Pebax membrane, the crystallinity of the Pebax/GO MMMs showed a little increase. The incorporation of GO induced an increase in the elastic modulus, whereas the strain at break and tensile strength decreased. The apparent activation energies (E_p) of CO₂, N₂, H₂, and CH₄ permeation through the Pebax/GO MMMs increased because of the greater difficulty of polymer chain rotation. The E_p value of CO₂ changed from 16.5 kJ/mol of the pristine Pebax to 23.7 kJ/mol of the Pebax/GO MMMs with 3.85 vol % GO. Because of the impermeable nature of GO, the gas permeabilities of the Pebax/GO MMMs decreased remarkably with increasing GO content, in particular for the larger gases. The CO₂ permeability of the Pebax/GO MMMs with 3.85 vol % GO decreased by about 70% of that of the pristine Pebax membrane. Rather than the Maxwell model, the permeation properties of the Pebax/GO MMMs could be described successfully with the Lape model, which considered the influence of the geometrical shape and arrangement pattern of GO on the gas transport. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42624.     

Preparation and characterization of CO2-selective Pebax/NaY mixed matrix membranes

CO₂-selective Pebax/NaY mixed matrix membranes (MMMs) were prepared by incorporating NaY zeolite into Pebax matrix. The morphology, chemical groups, thermal stability, and microstructure of the MMMs were investigated by scanning electron microscope, Fourier transform infrared spectroscopy, thermogravimetric analysis, and X-ray diffraction, respectively. The effects of zeolite loading amount, permeation temperature and pressure on the CO₂/N₂ separation performance of the resultant membranes were studied. The as-prepared MMMs are much superior to the pristine Pebax membranes in terms of permeability and selectivity. The CO₂ permeability and CO₂/N₂ selectivity can respectively reach to 131.8 Barrer and 130.8 for MMMs made by the starting materials containing 40 wt % NaY. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48398.     

High speed spin coating in fabrication of Pebax 1657 based mixed matrix membrane filled with ultra-porous ZIF-8 particles for CO<Subscript>2</Subscript>/CH<Subscript>4</Subscript> separation

Modified ultra-porous ZIF-8 particles were used to prepare novel ZIF-8/Pebax 1657 mixed matrix membranes (MMMs) on PES support for separation of CO₂ from CH₄ using spin coating method. TEM and SEM were used to characterize modified ZIF-8 particles. SEM was also used to investigate the morphology of synthesized MMMs. The MMMs with thinner selective layer showed higher CO₂ permeability and lower CO₂/CH₄ selectivity in permeation tests compared to MMMs with thicker selective layer. The plasticization was recognized as the main reason for rise in CO₂ permeability and drop in CO₂/CH₄ selectivity of thinner MMMs. The gas sorption results showed that the high permeability of CO₂ in MMMs is mainly due to the high solubility of this gas in MMMs, leading to high CO₂/CH₄ solubility selectivity for MMMs. The fractional free volume and void volume fraction of MMMs increased as the thickness of membrane decreased. Applying higher mixed feed pressures and permeation tests temperatures resulted in increase in CO₂ permeability and decrease in CO₂/CH₄ selectivity. At highest testing temperature (60 °C), the CO₂ permeability of synthesized MMMs with thinner selective layer remarkably increased.     

Improved CO2/CH4 separation performance of mixed-matrix membrane by adding ZIF-7-NH2 nanocrystals

Membrane-based technology is an attractive alternative in terms of CO₂ separation. Pebax-based membranes are regarded as potential candidates for CO₂ separation due to the favorable interaction between its poly (ethylene oxide) chains with CO₂ molecules and inorganic fillers. However, the separation performance for CO₂/CH₄ mixture is still suffered from the moderate gas permeability and selectivity. To overcome this problem, in this work, amino-functionalized zeolite imidazolate framework (ZIF-7-NH₂) nanocrystals were used as fillers to blend with Pebax 1657 for fabricating mixed-matrix membranes (MMMs). XRD, Brunauer–Emmett–Teller (BET), scanning electron microscope, and ¹H nuclear magnetic resonance characterization indicated that ZIF-7-NH₂ with the highest crystallinity was synthesized. Fourier transform infrared spectroscopy, thermogravimetric analysis, differential scanning calorimetry (DSC), and Young's modulus showed that it has good interfacial interaction. Gas separation test results showed that both the CO₂ permeability and CO₂/CH₄ selectivity of the 31 wt% ZIF-7-NH₂/Pebax MMMs increased by 80 and 170%, respectively. The improved performance is attributed to the addition of ZIF-7-NH₂ nanocrystals and the favorable interfacial interactions between the polymer and ZIF-7-NH₂ nanocrystals. Furthermore, the polyvinylidene fluoride supported hollow fiber composite membranes also exhibit the long-term stability for CO₂/CH₄ separation.     

The effect of ZIF-90 particle in Pebax/Psf composite membrane on the transport properties of CO2, CH4 and N2 gases by Molecular Dynamics Simulation method

Nowadays, mixed matrix membranes (MMMs) have considered by many researchers to overcome the problems of polymeric membranes. In addition, molecular dynamics (MD) and Monte Carlo (MC) simulation Methods are suitable tools for studying transport properties and morphology in MMMs. For this purpose, in this study using material studio 2017 (MS) software, the transport properties of CO₂, CH₄ and N₂ in Pebax, Psf neat Pebax/Psf composite and Pebax/Psf composite filled with ZIF-90 particles have been investigated. By adding Psf to Pebax matrix, the selectivity of CO₂/CH₄ and CO₂/N₂ gases has significantly increased. In addition, adding ZIF-90 particles to the Pebax/Psf composite increased the permeability of CO₂, CH₄ and N₂ compared to neat and composite membranes. The morphological properties of the membranes, such as the fractional free volume (FFV), radial distribution function (RDF), glass transition temperature (T_G), X-ray diffraction (XRD) and equilibrium density have calculated and acceptable results have obtained.     

Enhanced permeation performance of polyether-polyamide block copolymer membranes through incorporating ZIF-8 nanocrystals

Membrane-based CO2 separation is a promising alternative in terms of energy and environmental issues to other conventional techniques.Polyether-polyamide block copolymer (Pebax) membranes are promising for CO2 separation because of their excellent selectivity,but limited by their moderate gas permeability.In this study,fresh-prepared zeolitic imidazolate framework-8 (ZIF-8) nanocrystals were integrated into the Pebax(R)1657 matrices to form mixed matrix membranes.The resulting membrane exhibits significantly improved CO2 permeability (as high as 300％ increase),without the sacrifice of the selectivity,to the pristine polymer membrane.Several physical characterization techniques were employed to confirm the good interfacial interaction between ZIF-8 fillers and Pebax matrices.The effect of added ZIF-8 fillers on the transport mechanism through MMMs is also explored.Mixed-gas permeation for both CO2/N2 and CO2/CH4 was also evaluated.The separation performance for CO2/CH4 mixtures on the ZIF-8/Pebax MMMs is very close to the Roberson upper bound,and thus is technologically attractive for purification of natural gas.     

Pebax-based mixed matrix membranes loaded with graphene oxide/core shell ZIF-8@ZIF-67 nanocomposites improved CO2 permeability and selectivity

In order to facilitate CO₂ transport in Pebax-based membranes, graphene oxide (GO)/core shell ZIF-8@ZIF-67 nanocomposites were loaded in Pebax copolymer to improve CO₂ permeability and selectivity. The 0.5 wt% GO doped core shell ZIF-8@ZIF-67, which gave highest CO₂ adsorption capacity of 1.12 mmol/g, was used as nanocomposite. The incorporated GO/core shell ZIF enhanced CO₂ adsorption via unsaturated metal sites (Zn-O or Co-O), because O atoms in GO substituted for N atoms coordinated with Zn and Co single atoms in core shell ZIF-8@ZIF-67. Positron annihilation lifetime spectroscopy indicated that GO-templated core shell ZIF nanocomposites generated extra free volume and provided low-resistance channels to facilitate CO₂ transport. Fourier transform infrared spectroscopy analysis revealed that hydrogen bonds were generated between Pebax polymer chains and GO-templated core shell ZIF which improved swelling resistance and reduced interface defects. Therefore, Pebax-based MMMs loaded with 5 wt% GO/core shell ZIF-8@ZIF-67 exhibited optimum CO₂ permeability (173.2 barrers) and ideal selectivity of CO₂/N₂ (61.9) and CO₂/H₂ (11.6), which were 99.7%, 66.4%, and 20.8% higher than Pebax membranes and surpass Robeson 2008 upper bound. The tensile strength increased by 17.6% to 28.8 MPa and elongation at break increased by 7.61%–554.6% when pure Pebax membranes were incorporated with 2.5 wt% GO/core shell ZIF-8@ZIF-67.     

Fabrication of mixed‐matrix membranes with MOF‐derived porous carbon for CO2 separation

Mixed‐matrix membranes (MMMs) have shown great advantages but still face some challenges, such as the trade‐off between permeability and selectivity, stability, and the lack of efficient ways to enhance them simultaneously. Here, the fabrication of MMMs with metal‐organic frameworks derived porous carbons (MOF‐PCs) as fillers which exhibit selective‐facilitating CO₂ transport passage originating from interactions between fillers and CO₂ is showed. With the aid of the developed multicalcination method, MOF‐PCs with variable N‐contents were prepared and incorporated into PPO‐PEG matrix for the first time to prepare MMMs, which show excellent separation performance for CO₂/CH₄ mixture with a tunable separation performance by combining different N‐contents and surface areas of MOF‐PCs. Moreover, the developed MMMs have hydrothermal and chemical stability. This work not only presents a series of MMMs with both good separation properties and stability, it also provides useful information for guiding the fabrication of high performance MMMs for practical application. © 2018 American Institute of Chemical Engineers AIChE J, 64: 3400–3409, 2018     

Investigation of the effect of functionalized carbon nanotube and graphene oxide in guar gum-based mixed matrix membrane for gas separation application

The present study deals with preparing mixed matrix membranes (MMMs), a new polysaccharide-based natural polymer used as a matrix with functionalized carbon nanotubes (FCNTs) and graphene oxide (GO) used as an inorganic filler. This work identified the effect of the inorganic fillers (FCNTs or GO) with naturally occurring polymer for gas separation. The incorporation of fillers improves the gas separation performance of MMMs. In GG/FCNTs MMMs, the selectivities of CO₂/N₂ and CO₂/H₂ were enhanced by 55.24% and 57.89%, respectively. Moreover, in GG/GO MMMs, the selectivities of CO₂/N₂ and CO₂/H₂ were improved by 99.50% and 50%, respectively. The membrane was characterized by scanning electron microscopy (SEM) and Fourier-transform infrared spectroscopy (FTIR). The SEM analysis of GG/GO MMMs reveals layered structure, and GG/FCNTs MMMs create passages to transport gases. The Universal testing machine (UTM) is used to analyze the mechanical properties of pristine and modified membranes.     

功能化Zr-MOF强化混合基质膜CO2分离

混合基质膜（MMMs）在气体分离领域具有良好的应用前景,金属有机框架（MOFs）由于具有高孔隙率和有机连接基团,常被用作填料制备MMMs。但由于MOFs与聚合物的界面相容性问题,MMMs的气体分离性能提升受到限制。本文合成了功能化的Zr-MOF（UiO-66-AC）,并利用其与聚醚共聚酰胺（Pebax）共同制备了混合基质膜。填料中引入的羰基和羧基等基团提供了MOFs与聚合物基质之间较强的界面相互作用。与纯Pebax膜相比,UiO-66-AC/Pebax MMMs的气体渗透性能得到了显著提高。当填料质量分数为6%时,膜的CO₂渗透系数为102.4 Barrer,CO₂/N₂和CO₂/CH₄选择性分别为90.6和26.0,CO₂/N₂分离性能突破了Robeson上限(2008),表明该混合基质膜在CO₂的分离应用上具有潜力。     

Fabrication of Pebax/SAPO mixed matrix membranes for CO2/N2 separation

Mixed matrix membranes (MMMs) were prepared by solvent evaporation method using Pebax-1074 polymer as matrix and inorganic zeolite SAPO-23 as dopant. The morphology, surface functional groups, microstructure, thermal stability, and separation performance of MMMs were analyzed by scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray diffraction, thermogravimetric analysis, and gas permeation, respectively. The effects of dopant loading amount, permeation temperature, and permeation pressure on the structure and properties of MMMs were investigated. The results showed that the introduction of SAPO zeolite reduced the crystallinity of the MMMs and improved the CO₂/N₂ selectivity. Under the conditions of 30°C and 0.15 MPa, the MMMs prepared by incorporating with 5% SAPO zeolite in content exhibited the highest CO₂/N₂ selectivity of 72.0 together with the CO₂ permeability of 98.2 Barrer.     

Pebax–polydopamine microsphere mixed‐matrix membranes for efficient CO2 separation

Novel facilitated‐transport mixed‐matrix membrane (MMM) were prepared through the incorporation of polydopamine (PDA) microspheres into a poly(amide‐b‐ethylene oxide) (Pebax MH 1657) matrix to separate CO₂–CH₄ gas mixtures. The Pebax–PDA microsphere MMMs were characterized by Fourier transform infrared spectroscopy, scanning electron microcopy, X‐ray diffraction, differential scanning calorimetry, and thermogravimetric analysis. The PDA microspheres acted as an adhesive filler and generated strong interfacial interactions with the polymer matrix; this generated a polymer chain rigidification region near the polymer–filler interface. Polymer chain rigidification usually results in a larger resistance to the transport of gas with a larger molecular diameter and a higher CO₂–CH₄ selectivity. In addition, the surface of PDA microspheres contained larger numbers of amine, imine, and catechol groups; these were beneficial to the improvement of the CO₂ separation performance. Compared with the pristine Pebax membrane, the MMM with a 5 wt % PDA microsphere loading displayed a higher gas permeability and selectivity; their CO₂ permeability and CO₂–CH₄ selectivity were increased by 61 and 60%, respectively, and surpassed the 2008 Robeson upper bound line. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44564.     

Synthesis of dual-functionalized mixed matrix membrane with amino-GO-Bent/PVDF for efficient separation of CO2/CH4 and CO2/N2

Mixed matrix membranes (MMMs), which combine the characteristics of inorganic nanofillers and organic matrices, have received wide attention because of their good permeability and selective performance for separating CO₂ from industrial waste gases. In this work, the amino-GO-loaded bentonite (amino GO-Bent) was prepared by loading  NH₂ on the GO surface with a large number of functional sites. Firstly, by introducing  NH₂ on the surface of GO and then interacting with bentonite (Bent) organically modified by silane coupling agents through amide bonding. Mixed matrix membranes (MMMs) with an area of 623.7 cm² and homogeneous texture were prepared using amino-GO-Bent as inorganic filler to improve the membrane selectivity for CO₂/N₂ and CO₂/CH₄ separation. The results show that the introduction of amino GO-Bent in MMMs can greatly improve the CO₂ permeability and obtain high CO₂ permeation performance: 2.67945 × 10⁻⁷ cm³ (STP)·cm/s/cm²/cmHg, and the selectivity of CO₂/N₂ and CO₂/CH₄ can reach 307.28 and 325.97, respectively. The two selective values were 14 and 18 times higher than those of pure PVDF membranes, and the performance of MMMs far exceeded the Robeson upper limit in 2008, respectively.     

Membranes for CO2 /CH4 and CO2/N2 Gas Separation

Membrane technology has emerged as a leading tool worldwide for effective CO₂ separation because of its well-known advantages, including high surface area, compact design, ease of maintenance, environmentally friendly nature, and cost-effectiveness. Polymeric and inorganic membranes are generally utilized for the separation of gas mixtures. The mixed-matrix membrane (MMM) utilizes the advantages of both polymeric and inorganic membranes to surpass the trade-off limits. The high permeability and selectivity of MMMs by incorporating different types of fillers exhibit the best performance for CO₂ separation from natural gas and other flue gases. The recent progress made in the field of MMMs having different types of fillers is emphasized. Specifically, CO₂/CH₄ and CO₂/N₂ separation from various types of MMMs are comprehensively reviewed that are closely relevant to natural gas purification and compositional flue gas treatment     

Mixed matrix membranes containing polymer-embedded metal-organic framework microspheres

The controlling filler aggregation and strengthening interfacial interaction are of great scientific significance for mixed matrix membranes (MMMs). In this study, the polymer-embedded metal-organic framework (pMOF) microspheres (MSs) are designed by one-pot synthesis and employed as microfillers for improving separation performance of MMMs. Through adding polymer during solvothermal crystallization, the polymer chains are embedded into the MOF materials, and the morphologies of the MOFs are transformed from nanopaticles to polycrystalline MSs. Since the embedding of the identical polymer promotes the compatibility of polymeric matrixes and fillers, as well as the micrometer-sized porous MSs offer additionally superior and permanent transport pathways, the resulted MMMs display simultaneously enhanced selectivity and permeability for carbon capture. The CO₂/CH₄ selectivity and CO₂ permeability of the pMOF MMMs are achieved at 1.3 and 2.2 times as those of the pure polymeric membranes, and 1.5 and 1.2 times as those of the MOF MMMs, respectively.     

Methoxy poly (ethylene glycol) methacrylate-TiO2/poly (methyl methacrylate) nanocomposite: an efficient membrane for gas separation

Polymer/nanoparticle mixed matrix membranes (MMMs) is one of the most important topics in gas separation field. In this study, to improve gas separation efficiency, methoxy poly(ethylene glycol) methacrylate (MPEG) was grafted on TiO₂ surface and was used for synthesis of poly (methyl methacrylate) (PMMA) MMMs. Gas permeation and separation properties of PMMA/PMPEG-TiO₂ MMMs were studied for CO₂, CH₄, O₂, and N₂ gases. The results showed that the MMM filled with 5 wt% PMPEG-TiO₂ nanoparticle exhibited optimal separation performance with CO₂ permeability of 32.48 Barrer and CO₂/N₂ selectivity of 56.98, which are higher than pure polymer (2.75 Barrer and 36.71).     

Enhanced CO2 selectivity of polyimide membranes through dispersion of polyethyleneimine decorated UiO-66 particles

Branched polyethyleneimine (PEI) functionalized UiO-66 were synthesized and used as fillers to fabricated mixed-matrix membranes (MMMs) for CO₂/CH₄ separation. The purpose of introducing amino-functional groups in the filler is to improve the interfacial compatibility of the filler with the polymer through the formation of hydrogen bonds with the carbonyl group of 6FDA-ODA. Additionally, the amino group can facilitate CO₂ transport through a reversible reaction, enhancing the CO₂/CH₄ separation properties of MMM. The chemical structure and morphology of fillers and membranes were characterized by employing X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectrometer (FTIR), X-ray diffraction (XRD), thermogravimetric (TGA), Derivative thermogravimetry (DTG) and scanning electron microscope (SEM). Furthermore, the effects of filler loading and feed pressure on CO₂ permeability and CO₂/CH₄ selectivity have been investigated. MMMs present higher gas separation performance than pure 6FDA-ODA due to the presence of amino groups and the improvement of interface morphology. In particular, the MMM with 15 wt% loading of UiO-66-PEI shows optimum CO₂ permeability of 28.23 Barrer and CO₂/CH₄ selectivity of 56.49. Therefore, post-synthetic modification of UiO-66 particle with PEI is a promising alternative to improved membrane performance.     

Theoretical and experimental studies on the gas transport properties of mixed matrix membranes based on polyvinylidene fluoride

The effects of the impregnation of three types of inorganic fillers into polyvinylidene fluoride (PVDF) polymer membranes on the gas permeability and selectivity of these membranes were studied theoretically and experimentally. Permeabilities of He, CO₂, O₂, and N₂ through three types of mixed matrix membranes (MMMs) based on PVDF, that is, PVDF/SiO₂, PVDF/MCM‐41, and PVDF/4A MMMs, were experimentally measured and theoretically predicted using Maxwell, Higuchi, Bruggeman, and Bottcher‐Landauer models. Theoretical permeabilities of the PVDF/SiO₂ MMMs using the above four models predicted the results in the following order: Maxwell model>Bruggeman model>Bottcher model>Higuchi model. However, this sequence was reversed for PVDF/MCM‐41 MMMs. The nonporous SiO₂, mesoporous MCM‐41 and zeolite 4A inorganic fillers had effects on the permeabilities of the challenge gases for the PVDF/SiO₂, PVDF/MCM‐41, and PVDF/4A MMMs but had no effects on the selectivities of the MMMs. The experimental permeabilities of the MMMs showed that there were no significant differences among the three types of MMMs despite that the inorganic fillers, that is, SiO₂, MCM‐41, and zeolite 4A, had distinct dissimilar properties such as pore structures and particle sizes. Density measurements indicated that some voids were present in the polymer/particle interfaces. Based on the density measurement results, the void volume fractions of the resulting MMMs were calculated. An equation is derived to determine the void thickness of the MMM in terms of its physical properties and hence this proposed equation can substitute the difficult task of measuring such void thickness through any microscopy techniques. The Maxwell, Higuchi, Bruggeman, and Bottcher‐Landauer models could not predict the actual gas permeabilities of the PVDF MMMs. By taking the effects of crystallinity and immobilization factor on gas permeability into consideration, the extended modified Maxwell model showed good agreement with the experimental gas permeabilities of the resulting MMMs, indicating that the model did capture the essence of the gas transport behaviors through the MMMs. © 2013 American Institute of Chemical Engineers AIChE J, 59: 4715–4726, 2013     

Effect of support layer on gas permeation properties of composite polymeric membranes

PES/Pebax and PEI/Pebax composite membranes were prepared by coating the porous PES and PEI substrate membranes with Pebax-1657. The morphology and performance of the prepared membranes were investigated by SEM and CO₂ and CH₄ permeation tests. The CO₂ permeances of 28 and 52 GPU were achieved for PES/Pebax and PEI/Pebax composite membranes, respectively, with CO₂/CH₄ selectivities almost equal to that of Pebax (26). The experimental data were further subjected to a theoretical analysis using the resistance model. It was found that the porosity and the thickness of the dense section of PES substrate were an order of magnitude higher than those of PEI substitute. The porosity/thickness ratio of PEI substrate was, however, higher than PES, explaining the higher permeance of PEI/Pebax composite membrane. Substrates with porosities much higher than the Henis-Tripodi gas separation membrane were used in this work, aiming to achieve the selectivity of Pebax, rather than those of the substrate membrane materials.     

Study the effects of Cloisite15A nanoclay incorporation on the morphology and gas permeation properties of Pebax2533 polymer

In this study, mixed matrix membranes (MMMs) were prepared using commercially available poly(ether‐b‐amide) (Pebax2533) as polymer matrix and organically modified montmorillonite (OMMt) as filler with the aim of investigating their gas permeation properties. The prepared membranes were characterized by Fourier‐transform infrared (FTIR) spectroscopy, X‐ray diffraction (XRD), scanning electron microscope (SEM), thermal gravimetric analysis, and tensile strength analyses. Gas permeation properties of all the prepared membranes were evaluated at different pressures and clay loadings. Results of FTIR and SEM confirmed the appropriate adhesion between polymer and nanoclays so that no void formation was observed in the polymer/clay interface. XRD results showed that in low loading, clay dispersion occurred as exfoliated‐intercalated and at high loading as intercalated‐phase separated. Results of gas permeation test showed that by adding layered and impermeable clay particles to the polymer matrix, the permeation of soluble CO₂ gas reduced by 28% for the highest clay loading. By increasing of pressure from 2 to 6 bar, CO₂/CH₄ permselectivity increased at all nanoclay loadings. The highest CO₂/CH₄ selectivity was obtained for 6 wt % clay MMM at all pressures, while the highest CO₂/H₂ selectivity was achieved for neat polymer at 6 bar. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45302.