Synthesis and characterization of novel fluorine‐containing methacrylate copolymers: Reactivity ratios,thermal properties,and antimicrobial activity

The free‐radical‐initiated copolymerization of 2‐(4‐acetylphenoxy)‐2‐oxoethyl‐2‐methylacrylate (AOEMA) and 2‐(4‐benzoylphenoxy)‐2‐oxoethyl‐2‐methylacrylate (BOEMA) with 2‐[(4‐fluorophenyoxy]‐2‐oxoethyl‐2‐methylacrylate (FPEMA) were carried out in 1,4‐dioxane solution at 65°C using 2,2′‐azobisisobutyronitrile as an initiator with different monomer‐to‐monomer ratios in the feed. The monomers and copolymers were characterized by FTIR and ¹H‐ and ¹³C‐NMR spectral studies. ¹H‐NMR analysis was used to determine the molar fractions of AOEMA, BOEMA, and FPEMA in the copolymers. The reactivity ratios of the monomers were determined by the application of Fineman‐Ross and Kelen‐Tudos methods. The analysis of reactivity ratios revealed that BOEMA and AOEMA are less reactive than FPEMA, and copolymers formed are statistically in nature. The molecular weights (M _w and M _n) and polydispersity index of the polymers were determined using gel permeation chromatography. Thermogravimetric analysis of the polymers reveals that the thermal stability of the copolymers increases with an increase in the mole fraction of FPEMA in the copolymers. Glass transition temperatures of the copolymers were found to decrease with an increase in the mole fraction of FPEMA in the copolymers. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis of imide‐based methacrylic monomers and their copolymerization with methyl methacrylate: monomer reactivity ratios and heat resistance properties

The newly designed methacrylic monomer series 4‐phthalimidocyclohexyl methacrylate (PCMA ), 4‐hexahydrophthalimidocyclohexyl methacrylate (HPCMA) and 4‐hexahydro‐3,6‐methanophthalimidocyclohexyl methacrylate (HMPCMA) were synthesized. Their homopolymers and methyl methacrylate (MMA) based copolymer series were polymerized by free‐radical polymerization. The copolymer compositions were characterized using ¹H NMR spectra. The monomer reactivity ratios were calculated employing the Fineman?Ross (F‐T) and Kelen?Tüdös (K‐T) methods at low conversion. The values of r₁ and r₂ obtained by the F‐T and K‐T methods appear to be in close agreement (their average values are r₁ = 1.3061 and r₂ = 0.7336 for poly(PCMA‐co‐MMA), r₁ = 1.5169 and r₂ = 0.6840 for poly(HPCMA‐co‐MMA), r₁ = 1.7748 and r₂ = 0.5664 for poly(HMPCMA‐co‐MMA)) . The thermal stabilities and thermomechanical characteristics of the homopolymer and copolymer series were investigated by differential scanning calorimetry, thermogravimetric analysis and dynamic mechanical thermal analysis. © 2018 Society of Chemical Industry     

Morphology and thermal properties of liquid crystal p‐PAEB/n‐propyl methacrylate copolymers

The copolymers of p‐phenylene di{4‐[2‐(allyloxy) ethoxy]benzoate} (p‐PAEB) with n‐propyl methacrylate (PMA) were synthesized. The liquid crystalline behavior and thermal properties of copolymers were studied by polarizing optical microscopy (POM), differential scanning calorimetry (DSC), X‐ray diffractometer (XRD), and torsional braid analysis (TBA). The results of XRD, POM, and DSC demonstrate that the phase texture of copolymers is affected by the composition of liquid crystal units in copolymers. The POM and XRD reveal that liquid crystal monomer (p‐PAEB) and copolymers of p‐PAEB with PMA are all smectic phase texture. The dynamic mechanical properties of copolymers are investigated with TBA. The results indicate that the phase transition temperatures and dynamic mechanical loss peak temperature T_p of copolymers are affected by the composition of copolymers and liquid crystal cross networks. The maximal mechanical loss T_p is 114°C and is decreased with added PMA. The behaviors of phase transition are affected by the crosslinking density, and it is revisable for lightly crosslinking LC polymer networks, but it is nonreversible for the densely crosslinking of LC polymer networks. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis and characterization of hydrophilic copolymers of maleimide derivatives with 2‐hydroxyethyl methacrylate: electrochemical and thermal behavior

BACKGROUND: The high‐technology industries have been the driving force in the development of new synthetic polymers that combine thermal stability with specific functional properties. In this study p‐chlorophenylmaleimide, p‐hydroxyphenylmaleimide and p‐nitrophenylmaleimide (R‐PhMI) with 2‐hydroxyethyl methacrylate (HEMA) were synthesized by free radical polymerization to obtain hydrophilic polymers, in order to study the effect of the p‐chloroaryl, p‐hydroxyaryl or p‐nitroaryl group on the copolymer composition, electrochemical behavior and thermal properties. RESULTS: The thermal behavior was correlated with the copolymer composition and functional groups, maleimide derivatives, on the copolymers. Thermal decomposition temperature (TDT) and glass transition temperature (T_g) were influenced by the functional groups of R‐PhMI moiety on the copolymer. The polymers showed an electrochemically irreversible reduction process under the conditions tested. CONCLUSION: Poly[(p‐chloromaleimide)‐co‐(2‐hydroxyethyl methacrylate)] copolymer shows a higher TDT than poly[(p‐hydroxymaleimide)‐co‐(2‐hydroxyethyl methacrylate)] or poly[(p‐nitromaleimide)‐co‐(2‐hydroxyethyl methacrylate)] (NPHE). T_g decreases in going from nitro to hydroxyl to chloro groups. The NPHE copolymer shows a lower stability, losing weight at 200 °C. The NPHE copolymer shows a well‐defined reduction wave which is similar to those of the other copolymers and it also shows an additional quasi‐reversible reduction wave corresponding to the nitrobenzene group. Copyright © 2009 Society of Chemical Industry     

用甲基丙烯酸改善PMMA光纤芯材的耐热性

用甲基丙烯酸(MAA)改性PMMA,使其维卡软化点提高了20~23℃,透光率未降低。     

Copolymerization and thermal behavior of methyl methacrylate with N‐(phenyl/p‐tolyl) itaconimides

This study describes the synthesis, characterization, and thermal behavior of copolymers of methyl methacrylate (MMA) and N‐p‐tolyl itaconimide (PTI)/N‐phenyl itaconimide (I). Homopolymerization and copolymerization of N‐(phenyl/p‐tolyl) itaconimide with MMA was carried out by use of various mole fractions of N‐aryl itaconimide in the initial feed from 0.1 to 0.5, using azobisisobutyronitrile as an initiator and tetrahydrofuran as the solvent. The copolymer composition was determined by ¹H‐NMR spectroscopy using the proton resonance signals attributed to –OCH₃ of MMA (δ = 3.5–3.8 ppm) and the aromatic protons (δ = 7.0–7.5 ppm) of N‐aryl itaconimide. The reactivity ratios of the monomers were found to be r₁ (PTI) = 1.33 ± 0.05/r₂ (MMA) = 0.24 ± 0.03 and r₁ (I) = 1.465 ± 0.035/r₂ (MMA) = 0.385 ± 0.005. The molecular weight of the copolymers decreased with increasing mole fraction of N‐aryl itaconimide in the copolymers. Glass‐transition temperature (T_g) and thermal stability of PMMA increased with increasing amounts of itaconimides in the polymer backbone. A significant increase in the percentage char yield at 700°C was observed on incorporation of a low mole fraction of N‐aryl itaconimides. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1195–1202, 2003     

Synthesis,characterization, and antimicrobial properties of novel quaternary amine methacrylate copolymers

A novel amine methacrylate monomer trimethylolpropane trimethacrylate–piperazine–ethyleneglycol dimethacrylate (TMPTMA‐PPZ‐EGDMA) was synthesized by amination of trimethylolpropane trimethacrylate (TMPTMA) with excess of piperazine (PPZ) followed by reaction with ethyleneglycol dimethacrylate (EGDMA). Copolymerization of TMPTMA‐PPZ‐EGDMA with 2‐hydroxyethyl methacrylate (HEMA) was carried out by free radical polymerization using ammonium persulfate (APS) and N,N,N′,N′‐tetramethyl ethylenediamine (TEMED) as a redox initiator. The copolymers obtained were then quaternized with 1‐iodooctane. The monomers were characterized by FTIR and ¹H NMR spectral studies. The molecular weights and polydispersity values of the monomers were determined with gel permeation chromatography. Quaternized copolymers containing more than 20% amine methacrylate monomer showed microporosity in the range of 9.9–10.4 μm. The antibacterial activity of the quaternized copolymers against Escherichia coli and Staphylococcus aureus was studied using UV–vis spectrophotometer and scanning electron microscopy. Quaternized copolymers showed broad‐spectrum contact‐killing antibacterial properties without releasing any active agent as checked by iodide selective ion meter. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Homopolymer of 4-chloro-3-methyl Phenyl Methacrylate and its Copolymers with Butyl Methacrylate: Synthesis, Characterization, Reactivity Ratios and Antimicrobial Activity

The methacrylate monomer 4-chloro-3‐methyl phenyl methacrylate (CMPM) was synthesized by reacting 4-chloro-3‐methyl phenol with methacryloyl chloride. The homopolymer and various copolymers of CMPM with n-butyl methacrylate were synthesized by free-radical polymerization in toluene at 70°C using 2,2′-azobis(isobutyronitrile) as the initiator. The CMPM monomer was characterized by Fourier transform IR and ¹H-NMR studies. The copolymers were characterized by IR spectroscopy. The molecular weights (M _n and M _w) and the polydispersity index were obtained from gel permeation chromatography. The solubility and intrinsic viscosity of the homopolymer and the copolymers are also discussed here. The copolymer composition obtained from UV spectra led to the determination of reactivity ratios employing Fineman-Ross and Kelen-Tudos linearization methods. Thermogravimetric analyses of the homopolymer and the copolymers were carried out under a nitrogen atmosphere. The homopolymer and the copolymers prepared were tested for their antimicrobial activity against bacteria, fungi and yeasts.     

Synthesis,modification, and porous properties of new glycidyl methacrylate copolymers

Synthesis, copolymerization, and physicochemical properties of new, of different degrees of crosslinker tetrafunctional bis[4(2‐hydroxy‐3‐methacryloyloxypropoxy)phenyl]sulfide and glycidyl methacrylate copolymers are presented. The monomers were used for the synthesis of porous microspheres in the presence of pore‐forming diluents, decan‐1‐ol, and toluene. Influence of diluents composition on their porous structures was studied. Porous structure of the obtained microspheres in dry (from nitrogen adsorption–desorption measurements) states was studied. Their chemical structures were studied by the use of Fourier transform infrared. The number of epoxy groups of the obtained copolymers, their thermal properties (thermogravimetric analysis), and swelling characteristics in 10 solvents of different chemical nature were examined. Selected copolymers were modified by amines in the epoxide ring‐opening reaction. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Studies on the copolymerization of methyl methacrylate with N‐(o/m/p‐chlorophenyl) itaconimides

The article describes the synthesis and characterization of N‐aryl itaconimide monomers such as: N‐(p‐chlorophenyl) itaconimide (PI)/N‐(m‐chlorophenyl) itaconimide (MI)/N‐(o‐chlorophenyl) itaconimide (OI) and its copolymerization behavior with MMA. The homopolymers and copolymers of N‐aryl itaconimides and methyl methacrylate (MMA, M₂) were synthesized by varying the mol fraction of N‐aryl itaconimides in the initial feed from 0.1 to 0.5 using azobisisobutyronitrile (AIBN) as an initiator and tetrahydrofuran (THF) as the solvent. Copolymer composition was determined using ¹H‐NMR spectroscopy [by taking the ratio of intensities of signals due to ? OCH₃ of MMA (δ = 3.59 ppm) and the aromatic proton (δ = 7.2–7.5 ppm) of N‐aryl itaconimides] and percent nitrogen content. The reactivity ratios were found to be r₁ = 1.33 and r₂ = 0.36 (PI‐MMA) r₁ = 1.15 and r₂ = 0.32 (MI‐MMA) and r₁ = 0.81 and r₂ = 0.35 (OI‐MMA). Molecular weight as determined using high‐performance liquid chromatography decreased with increasing mol fraction of itaconimides in copolymers. All the polymers had a polydisperstivity index in the range of 1.5–2.6.Thermal characterization was done using differential scanning calorimetry and dynamic thermogravimetry in nitrogen atmosphere. Incorporation of these N‐aryl itaconimides in PMMA backbone resulted in an improvement in glass transition temperature (T_g) and thermal stability. Percent char increased with the increase of PI/MI/OI content in the copolymers. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 2078–2086, 2001     

Studies on dimensional stability and thermal properties of rubber wood chemically modified with styrene and glycidyl methacrylate

Rubber wood (Hevea brasiliensis) was impregnated with styrene and glycidyl methacrylate (GMA) as the crosslinking monomer. After impregnation, the polymerization was accomplished by catalyst heat treatment. Water uptake (%) and water vapor exclusion (%) of the rubber wood were found to be improved on treatment. Dimensional stability expressed in terms of volumetric swelling in water vapor (90% relative humidity) as well as in liquid water and water repellent effectiveness (WRE) of the treated samples were determined and also found to be improved. The wood–polymer interaction was confirmed by FTIR spectroscopy. Thermal properties of untreated and treated wood samples were evaluated by thermogravimetric analysis (TGA) and differential scanning calorimetery (DSC) and an improvement in thermal stability was observed for the wood–polymer composites. The improvement in properties observed as more with styrene–GMA (1:1) combination. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 1938–1945, 2004     

Hydroxyalkyl methacrylates: Kinetic investigations of radical polymerizations of pure 2-hydroxyethyl methacrylate and 2, 3-dihydroxypropyl methacrylate and the radical copolymerization of their mixtures

Hydroxyalkyl methacrylates such as 2-hydroxyethyl methacrylate (HEMA) and 2, 3-dihydroxypropyl methacrylate (DHPM) have been prepared. An efficient method has been developed yielding a quantitative purification in order to eliminate any trace of crosslinking agent in these monomers. Kinetic investigations of the radical polymerization and of the radical copolymerization of their mixtures have been performed by measuring, at various times, the monomer consumptions, using gas-liquid chromatography (g.l.c.). It has been established that the radical copolymerization of DHPM-HEMA couple works efficiently without excessive fluctuations in the composition of the formed chains. The corresponding radical copolymerization ratios have been precisely determined and the obtained results to demonstrate that DHPM-HEMA system leads to an ideal copolymerization.