Effect of functionalized graphene oxide with phosphaphenanthrene and isocyanurate on flammability,mechanical properties,and thermal stability of epoxy composites

Maleic anhydride, 9, 10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide, and 1, 3, 5-triglycidyl isocyanurate functionalized graphene oxide (GO) was prepared in this paper. The resultant phosphorus-nitrogen functionalized GO called GOMT was homogeneously dispersed and incorporated into diglycidyl ether of bisphenol A to prepare composites. The char residue of GOMT/EP composites increased and its LOI value increased to 28.1% with UL-94 V-1 rating. T _g of composite containing 1 phr GOMT increases to 165.6 °C, and the storage modulus of the sample with 3 phr GOMT was increased by 19% compared with pure EP. Furthermore, the elastic modulus and flexural strength of epoxy composite with 5 phr GOMT were increased by 17.9 and 26.7% at room temperature, respectively. Besides, the incorporation of GOMT into EP significantly reduces the PHRR and THR of the matrix. Therefore, the as-designed GOMT not just obviously enhances the flame retardancy with low loading but raises the mechanical behavior and thermal stability of epoxy resins. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48761.     

Ionic liquid modified graphene oxide for enhanced flame retardancy and mechanical properties of epoxy resin

In this work, to improve its dispersion and flame retardancy, graphene oxide (GO) was functionalized by silane coupling agent KH550 and 1-butyl-3-methylimidazole hexafluorophosphate (PF₆-ILs), and characteristics of the PF₆-ILs@GO was obtained by transmission electron microscopy (TEM), energy dispersive spectroscopy (EDS), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and thermogravimetric analysis (TGA). Then, the synergistic flame retardant of GO or PF₆-ILs@GO and melamine pyrophosphate (MPP) were applied for epoxy resin (EP) materials. Specifically, the limiting oxygen index (LOI) value of EP with 0.1 wt% PF₆-ILs@GO was increased to 29.2% from 27.5% of EP/MPP composites, and the UL-94 test reached the V-0 rating. The CCT results showed that the total heat release (THR) and total smoke release (TSP) of EP/MPP/PF₆-ILs@GO composites were significantly 24.4% and 53.4% lower than that of EP/MPP composites. Besides, the thermal behavior investigated by TGA indicated that the char-forming effect of GO and PF₆-ILs@GO was great, the residual char of EP/MPP/PF₆-ILs@GO composites was as high as 19.5% at 700°C, and its thermal stability was higher than that of EP/MPP composites. On the other hand, the tensile strength of EP/MPP/GO and EP/MPP/PF₆-ILs@GO composites were increased by 15.6% and 28.3% compared with EP/MPP composites. According to SEM analysis, the EP/MPP/GO composites formed a good protective char layer, which can effectively improve flame retardancy of EP. This research represents a new method of flame retardant modified GO to improve the flame retardancy and mechanical properties of polymers.     

Epoxy resin/phosphorus‐based microcapsules: Their synergistic effect on flame retardation properties of high‐density polyethylene/graphene nanoplatelets composites

Two types of microcapsule flame retardants are prepared by coating ammonium polyphosphate (APP) and aluminum diethylphosphinate (ADP) with epoxy resin (EP) as the shell via in situ polymerization, and blended with high density polyethylene (HDPE)/graphene nanoplatelets (GNPs) composites to obtain flame‐retardant HDPE materials. Fourier transform infrared spectroscopy, scanning electron microscopy (SEM), and water contact angle results confirm the formation of core–shell structures of EP@APP and EP@ADP. The limiting oxygen index (LOI), vertical burning test (UL‐94), cone calorimetry, and Raman spectroscopy are employed to characterize the HDPE/GNPs composites filled with EP@APP and EP@ADP core–shell materials. A UL94 V‐0 level and LOI of 34% is achieved, and the two flame retardants incorporated in the HDPE/GNPs composite at 20 wt % in total play a synergistic effect in the flame retardancy of the composite at a mass ratio of EP@ADP:EP@APP = 2:1. According to the cone‐calorimetric data, the compounding composites present much lower peak heat release rate (300 kW/m²) and total heat release (99.4 MJ/m²) than those of pure HDPE. Raman spectroscopic analysis of the composites after combustion reveals that the degree of graphitization of the residual char can reach 2.31, indicating the remarkable flame retarding property of the composites. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46662.     

A high-efficiency DOPO-based reactive flame retardant with bi-hydroxyl for low-flammability epoxy resin

A high-efficiency DOPO-based reactive flame retardant (DPE) with bi-hydroxyl was successfully synthesized via reacting DOPO with imine obtained from the condensation of ethanolamine and 1,4-phthalaldehyde, and used as co-curing agent to improve the fire safety of epoxy resin (EP). Its chemical structure was characterized by Fourier transform infrared (FTIR) spectra, ¹H, ³¹P nuclear magnetic resonance (NMR) spectra and elemental analysis. The curing behavior, thermal properties, flame-retardant properties of EP/DPE systems were investigated. The results revealed that DPE slightly decreased the glass transition temperature (T_g), but accelerated the curing cross-linking reaction of EP. Furthermore, DPE decreased thermal degradation rate of epoxy matrix and promoted the formation of residual char at high temperature. After adding DPE, the flame retardant of epoxy thermosets was greatly improved. Especially, the thermoset modified with 5 wt% DPE achieved limiting oxygen index (LOI) value of 33.6% and V-0 rating in UL-94 test, demonstrating the highly efficient flame retardancy. While its peak heat release rate (PHRR), total heat release (THR) and total smoke production (TSP) were respectively decreased by 32.6%, 17.8%, and 13.9% compared with neat EP. Moreover, the research on flame retardant mechanism disclosed that DPE played dual flame-retardant effect in the gaseous and condensed phases.     

Preparation and investigation of flame‐retardant epoxy resin modified with a novel halogen‐free flame retardant containing phosphaphenanthrene,triazine‐trione,and organoboron units

In this article, a novel flame retardant (coded as BNP) was successfully synthesized through the addition reaction between triglycidyl isocyanurate, 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide and phenylboronic acid. BNP was blended with diglycidyl ether of bisphenol‐A to prepare flame‐retardant epoxy resin (EP). Thermal properties, flame retardancy, and combustion behavior of the cured EP were studied by thermogravimetric analysis, limited oxygen index (LOI) measurement, UL94 vertical burning test, and cone calorimeter test. The results indicated that the flame retardancy and smoke suppressing properties of EP/BNP thermosets were significantly enhanced. The LOI value of EP/BNP‐3 thermoset was increased to 32.5% and the sample achieved UL94 V‐0 rating. Compared with the neat EP sample, the peak of heat release rate, average of heat release rate, total heat release, and total smoke production of EP/BNP thermosets were decreased by 58.2%–66.9%, 27.1%–37.9%, 25.8%–41.8%, and 21.3%–41.7%, respectively. The char yields of EP/BNP thermosets were increased by 46.8%–88.4%. The BNP decomposed to produce free radicals with quenching effect and enhanced the charring ability of EP matrix. The multifunctional groups of BNP with flame retardant effects in both gaseous and condensed phases were responsible for the excellent flame retardancy of the EP/BNP thermosets. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45291.     

Novel flame‐retardant epoxy composites containing aluminium β‐carboxylethylmethylphosphinate

A novel flame‐retardant aluminum β‐carboxylethylmethylphosphinate [Al(CEP)] was synthesizedby a simple process. The effect of Al(CEP) on the curing of epoxy resin (EP) was investigated with differential scanning calorimetry (DSC) and Fourier transform infrared spectroscopy. The flame retardancy and thermal properties of Al(CEP)/EP were analyzed by a limiting oxygen index (LOI), vertical burning test (UL‐94), scanning electron microscopy (SEM) with energy‐dispersive X‐ray (EDX), gravimetric analyses, and DSC. Results disclosed that curing of EP is delayed by incorporating Al(CEP). The flexural strength of EP is reduced but the flexural modulus is increased by adding Al(CEP). Adding Al(CEP) depresses the decomposition of EP while leads to a increase in the glass transition temperature (T_g), in char formation and in flame retardancy of EP. EP containing 25 phr Al(CEP) provides LOI of 28.3% and passes UL‐94 V‐0 rating. SEM results show that the sample passing V‐0 rating can form the condensed char whereas porous char is observed from the sample failing in V‐0 rating after combustion. EDX analysis shows that the condensed char presents higher weight ratio of carbon to phosphorus than the porous char, indicating appropriate amount of Al(CEP) is necessary for formation of the stable char. POLYM. ENG. SCI., 55:657–663, 2015. © 2014 Society of Plastics Engineers     

Effects of ammonium polyphosphate and triphenyl phosphate on the flame retardancy,thermal, and mechanical properties of glass fiber–reinforced PLA/PC composites

The purpose of this study is to increase of the flammability properties of the glass fiber (GF)–reinforced poly (lactic acid)/polycarbonate (PLA/PC) composites. Ammonium polyphosphate (APP) and triphenyl phosphate (TPP) were used as flame retardants that are including the organic phosphor to increase flame retardancy of GF‐reinforced composites. APP, TPP, and APP‐TPP mixture flame retardant including composites were prepared by using extrusion and injection molding methods. The properties of the composites were determined by the tensile test, limiting oxygen index (LOI), differential scanning calorimetry (DSC), and heat release rate (HRR) test. The minimum T_g value was observed for the TPP including PLA/PC composites in DSC analysis. The highest tensile strength was observed in GF‐reinforced PLA/PC composites. In the LOI test, GF including composite was burned with the lowest concentration of oxygen, and burning time was the longest of this composite. However, the shortest burning time was obtained by using the mixture flame retardant system. The flame retardancy properties of GF‐reinforced PLA/PC composite was improved by using mixture flame retardant. When analyzed the results of HRR, time to ignition (TTI), and mass loss rate together, the best value was obtained for the composite including APP.     

Thermal and Flame Retardation Properties of Melamine Phosphate-Modified Epoxy Resins

We have synthesized a series of epoxy resins containing melamine phosphate (MP) and investigated their thermal and flame retardation properties. MP functions as a hardener and a flame retardant or as an additive of the cured epoxy resin to enhance flame retardation properties of epoxy resins. The reactions of DGEBA cured in the presence of MP were monitored by NMR and FTIR. Our results show that in both reactive and additive modes, MP is effective in increasing limiting oxide index (LOI) and the char yields of epoxy resins at lower phosphorous content. We observed that flame retardation by MP in its reactive mode is better than in its additive mode; the same phenomenon was found also for the glass-transition temperature (T _g). Thermogravimetric analysis (TGA) demonstrated that epoxy resins containing MP decompose at relatively lower temperatures than those lacking MP; this decomposition results in a protective layer forming that prevents the epoxy resins from decomposing further by combustion.     

Preparation,characterization and properties of a halogen‐free phosphorous flame‐retarded poly(butylene terephthalate) composite based on a DOPO derivative

A phosphorous flame retardant (DOPO‐MAH) was synthesized through the reaction between of 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide (DOPO) and maleic anhydride (MAH) and confirmed by FT‐IR, ¹H NMR, and ³¹P NMR techniques. The obtained flame retardant was then melt blended with poly(butylene terephthalate) (PBT) to prepare flame retardant PBT/DOPO‐MAH composites. The composites were characterized by LOI, UL‐94, and mechanical tests as well as scanning electron microscopy, thermogravimetric analysis, and differential scanning calorimetry analysis. On adding 20 wt % DOPO‐MAH, LOI increased from 20.9 to 25.7 and the UL‐94 V‐0 rating was achieved, whereas the tensile and flexural properties were notably improved. Torque‐time profile during the melt blending and intrinsic viscosity of the composite indicated that DOPO‐MAH acted as both flame retardant and chain extender for the PBT matrix. The results showed that PBT/DOPO‐MAH composite is a promising material for its good comprehensive properties. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 1301‐1307, 2013     

Synthesis of aluminum ethylphenylphosphinate flame retardant and its application in epoxy resin

A novel flame retardant additive, aluminum ethylphenylphosphinate (AEPP), was synthesized from diethyl phenylphosphonite and aluminum chloride hexahydrate, and characterized by FTIR, ¹H NMR, and ³¹P NMR. AEPP was added into diglycidyl ether of bisphenol A epoxy resin (EP) cured by bisphenol A‐formaldehyde novolac resin. The flame retardancy of the cured EP was investigated by limited oxygen index, UL 94 test, and cone calorimeter test. The results revealed that the EP composite containing 15% AEPP had a limited oxygen index value of 28.2% with a UL 94 V‐0 rating. The incorporation of AEPP effectively decreased the peak heat release rate and the total heat release in cone calorimeter test analysis. Scanning electron microscopy results showed that the introduction of AEPP benefited to the formation of a smooth and continuous char layer during combustion of the flame retarded EP. The thermogravimetric analysis results indicated that the incorporation of AEPP promoted the initial decomposition of EP matrix, but AEPP/EP composites had a higher char yield at high temperatures. Moreover, the flexural properties of the flame retarded EP composites were studied.     

Synthesis of modified graphene oxide and its improvement on flame retardancy of epoxy resin

In this work, the small molecule with double-phosphaphenanthrene structure was successfully grafted on the surface of graphene oxide (GO), which is called functionalized graphene oxide (FGO). The introduction of FGO improved the poor interfacial compatibility between graphene and epoxy matrix. And FGO could be used as the highly effective flame retardant. The thermogravimetric analysis results showed a significant improvement in the char yield of cured FGO/EP. When the content of FGO was 3 wt %, the limiting oxygen index value reached 30.4%. At the same time, the three-point bending and thermomechanical tests confirmed that the mechanical properties of the epoxy resin composites were improved. Based on the char analyses of SEM images and Raman spectroscopy, the flame retardant could promote the formation of a stable carbon layer. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 47710.     

Synthesis of a novel DOPO‐based polyphosphoramide with high char yield and its application in flame‐retardant epoxy resins

A novel and highly effective flame retardant (FR), DOPO‐TPMP oligomer, was synthesized by a simple condensation of 4‐(hydroxymethyl)‐2,6,7‐trioxa‐1‐phosphabicyclo[2.2.2]octane‐1‐oxide and phosphorus oxychloride followed by a polycondensation reaction with 6‐(2,5‐dihydroxyphenyl)‐6H‐dibenzo[c,e][1,2]oxaphosphinine‐6‐oxide. The chemical structure of DOPO‐TPMP was well characterized using Fourier transform infrared and NMR spectra. DOPO‐TPMP was used as an additive‐type FR for epoxy resin (EP). The FR properties of the resultant EP composites were investigated by limiting oxygen index (LOI) test, UL‐94 vertical burning test and cone calorimeter measurements. Specifically, the EP composite containing 10.0% DOPO‐TPMP achieved a LOI value of 36.1%, V‐0 rating in the UL‐94 test and a 58% reduction in peak heat release rate. Further mechanism analysis attributed the enhanced flame retardancy to the increased char yield on the addition of DOPO‐TPMP. © 2019 Society of Chemical Industry     

Preparation of a ternary hybrid of P-g-C3N4@PGS-Ti and its enhancement of the flame retardancy of epoxy resins

A novel ternary hybrid flame retardant named P-g-C₃N₄@PGS-Ti was prepared through step-by-step method. First, titanium dioxide was loaded on PGS to make PGS-Ti (where PGS = palygorskite), and then, PGS-Ti was decorated by phosphor-doped g-C₃N₄ (abbreviated as P-g-C₃N₄) to prepare a ternary flame retardant of P-g-C₃N₄@PGS-Ti. It showed that P-g-C₃N₄@PGS-Ti could efficiently improve the flame retardancy of epoxy resins (EP). The structure and the morphology of P-C₃N₄@PGS-Ti were characterized by Fourier transform infrared spectroscopy, X-ray diffraction, scaanning electron microscopy and hermogravimetric analysis (TGA). The flame retardancy and the burning behavior of 5 wt% P-g-C₃N₄@PGS-Ti composited EP were well investigated through TGA, limiting oxygen index (LOI), cone calorimeter test (CCT) and vertical burning test (UL-94 standard). It was found that the peak heat releasing (pk-HRR) of the EP/P-g-C₃N₄@PGS-Ti composite reduced 36% (from 1459 to 852 kW/m²) with the addition of 5 wt% of P-g-C₃N₄@PGS-Ti flame retardant to the matrix of EP. The combustion residue analysis showed that the EP/P-g-C₃N₄@PGS-Ti composite gained the most continuous and firmest char yield due to the synergistic effect of PGS, TiO₂ and the introducing of P element. The mechanism proved that the combination of gas phase and condensed phase flame-retardant processes were well coordinated to improve the fire retardancy for EP. We tested and studied the mechanical properties of EP/P-g-C₃N₄@PGS-Ti composites. Only 2.4% decreasing of flexural strength and 23.5% decreasing of impact strength in EP/P-g-C₃N₄@PGS-Ti composites compared to pure EP, respectively. But according to the test results of EP/P-g-C₃N₄@PGS-Ti composite material and the control sample in the system, EP/P-g-C₃N₄@PGS-Ti composite material had the highest flexural modulus and impact strength.     

Mechanical,thermal properties,and flame retardancy of PC/ultrafine octaphenyl‐POSS composites

Composites of ultrafine polyhedral oligomeric octaphenyl silsesquioxane (OPS) and polycarbonate (PC) were prepared by melt blending. The mechanical and thermal properties of the composites were characterized by tensile and flexural tests, impact test, differential scanning calorimeter (DSC), dynamic mechanical analysis (DMA), and thermal gravimetric analysis (TGA). Rheological properties of these melts were tested by torque rheometer. The flame retardancy of the composites was tested by limiting oxygen index (LOI), the vertical burning (UL‐94), and cone calorimeter test. The char residue was characterized by scanning electron microscope (SEM) and ATR‐FTIR spectrum. Furthermore, the dispersion of OPS particles in the PC matrix was evidenced by SEM. The results indicate that the glass transition temperatures (T_g) and torque of the composites decrease with increasing OPS loading. The onset decomposition temperatures of composites are lower than that of PC. The LOI value and UL‐94 rating of the PC/OPS composites increase with increasing loading of OPS. When OPS loading reaches 6 wt %, the LOI value is 33.8%, UL‐94 (1.6 mm) V‐0 rating is obtained, and peak heat release rate (PHRR) decreases from 570 to 292 kJ m^?2. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

甲基丁基次膦酸铝/环氧树脂阻燃复合材料性能研究

以甲基丁基次膦酸铝[Al(MBP)]作为环氧树脂(EP)的阻燃剂,着重研究了[Al(MBP)/EP]阻燃复合材料的阻燃性能、机械性能、热分解性能及玻璃化转变温度Tg。结果表明,Al(MBP)是EP的高效阻燃剂,15%用量就可以使Al(MBP)/EP复合材料的氧指数值(LOI)达到29.6%,垂直燃烧通过UL94 V-0级标准。Al(MBP)能够明显抑制EP的分解,降低EP的分解速率,提高其成炭能力。此外,Al(MBP)与EP的相容性较好,对复合材料的机械性能影响不大;复合材料的玻璃化转变温度(Tg)明显提高,15%和20%的Al(MBP)/EP复合材料的Tg分别为161.2和172.5℃,远高于纯EP(150.6℃)。     

Synthesis of a novel phosphonate flame retardant and its application in epoxy resins

A novel phosphonate flame retardant additive bis(2,6‐dimethyphenyl) phenylphosphonate (BDMPP) was synthesized from phenylphosphonic dichloride and 2,6‐dimethyl phenol, and its chemical structure was characterized by Fourier transform infrared (FTIR) spectroscopy, ¹H and ³¹P nuclear magnetic resonance. The prepared BDMPP and curing agent m‐phenylenediamine were blended into epoxy resins (EP) to prepare flame retardant EP thermosets. The effect of BDMPP on fire retardancy and thermal degradation behavior of EP/BDMPP thermosets was investigated by limiting oxygen index (LOI), vertical burning test (UL‐94), cone calorimeter and thermalgravimetric analysis (TGA). The morphologies of char residues of the EP thermosets were investigated by scanning electron microscopy (SEM) and the water resistant properties of thermosets were evaluated by putting the samples into distilled water at 70°C for 168 h. The results demonstrated that the cured EP/14 wt % BDMPP composites with the phosphorus content of 1.11 wt % successfully passed UL‐94 V‐0 flammability rating and the LOI value was as high as 33.8%. The TGA results indicated that the introduction of BDMPP promoted EP matrix decomposed ahead of time compared with that of pure EP and led to a higher char yield at high temperature. The incorporation of BDMPP enhanced the mechanical properties and reduced the moisture absorption of EP thermosets. The morphological structures of char residue revealed that BDMPP benefited to the formation of a more compact and homogeneous char layer on the materials surface during burning, which prevented the heat transmission and diffusion, limit the production of combustible gases and then lead to the reduction of the heat release rate. After water resistance tests, EP/BDMPP thermosets still remained excellent flame retardancy. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42765.     

Flame retardant performance of a carbon source containing DOPO derivative in PET and epoxy

The combination of gas‐phase and condensed‐phase action will contribute to high quality flame retardant. A novel 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide (DOPO)‐based flame retardant (DOPO‐DOPC), which contains carbon source was synthesized in favor of conducting the effect of gas‐phase as well as promoting the char formation in condensed‐phase. The chemical structure of DOPO‐DOPC was characterized by nuclear magnetic resonance (NMR) and Fourier transform infrared spectroscopy (FTIR). DOPO–DOPC was used as an additive in poly(ethylene terephthalate) (PET) and epoxy resin (EP). The flame retardancy of PET/DOPO‐DOPC and EP/DOPO‐DOPC composites were studied by limiting oxygen index (LOI) and UL‐94 test. The results showed that the incorporation of DOPO–DOPC into PET or EP could obviously improve their flame retardancy. The LOI values of modified PET or EP, which contained 10 wt % DOPO‐DOPC reached 42.8 and 31.7%, respectively. The thermogravimetric analysis (TGA) results revealed that DOPO–DOPC enhanced the formation of char residues. The Laser Raman spectroscopy (LRS) was used to investigate the carbon structure of thermal oxidation residues. Because of the combination of the gas phase flame retardant effect of DOPO moiety and the promoting formation of char residues in condensed phase, the PET and EP composites exhibited significant improvement toward flame retardancy. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44639.     

Preparation and study of intumescent flame retardant poly(butylene succinate) using MgAlZnFe‐CO3 layered double hydroxide as a synergistic agent

Intumescent flame retardant consisting of ammonium polyphosphate and melamine, and MgAlZnFe‐CO₃ layered double hydroxides (LDHs) prepared by the constant pH coprecipitation method, were added to poly(butylene succinate) (PBS) via melt blending to obtain novel intumescent flame retardant poly(butylene succinate) (IFR‐PBS) composites. A study on the effect of MgAlZnFe‐CO₃ LDHs on the mechanical, thermal, and flame retardancy properties of IFR‐PBS composites was investigated. It was revealed that IFR‐PBS composites exhibited both excellent flame retardancy and antidripping properties when the content of MgAlZnFe‐CO₃ LDHs was 1% (the total loading of flame retardant was 20%), for a goal of vertical flammability (UL‐94) V‐0 rate and a limiting oxygen index value of 35. The results showed that a suitable amount of MgAlZnFe‐CO₃ LDHs had a noticeable synergistic effect on IFR‐PBS composites. Importantly, tensile strength and flexural strength were improved by the presence of MgAlZnFe‐CO₃ LDHs. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40736.     

Development of a DOPO‐containing melamine epoxy hardeners and its thermal and flame‐retardant properties of cured products

In this study, a novel Schiff base of melamine used as flame‐retardant curing agent for epoxy resins, was synthesized via condensation reaction of 4‐hydroxybenzaldehyde with melamine, followed by the addition of 9,10‐dihydro‐9‐oxa‐10‐phosphaphen‐anthrene 10‐oxide (DOPO) to the resulting imine linkage. The structure of DOPO‐containing melamine Schiff base (P‐MSB) was characterized by Fourier transformed infrared spectroscopy, ¹H‐nuclear magnetic resonance (¹H‐NMR) and ³¹P‐NMR. The compound (P‐MSB) was used as a reactive flame retardant in o‐cresol formaldehyde novolac epoxy resin (CNE) to prepare flame‐retardant epoxy resins for electronic application. The thermal and flame‐retardant properties of the epoxy resins cured by various equivalent ratios phenol formaldehyde novolac (PN) and P‐MSB were investigated by the nonisothermal differential scanning calorimetry, the thermogravimetric analysis, and limiting oxygen index test. The obtained results showed that the cured epoxy resins possessed high T_g (165°C) and good thermal stability (T_5%, 321°C). Moreover, the P‐MSB/CNE systems exhibited higher limiting oxygen index (35) and more char was maintained in P‐MSB/CNE systems than that in PN/CNE system and the effective synergism of phosphorus–nitrogen indicated their excellent flame retardancy. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Synergistic action of expandable graphite on fire safety of a self-intumescent flame retardant epoxy resin

Previously, it was reported that epoxy resin (EP) filled with ammonium polyphosphate (APP) and copper (I) oxide (Cu₂O) at a mass ratio of 8/2 (APP8-Cu₂O2) as a self-intumescent system demonstrated promising fire retardancy. To further improve the flame retardant efficiency, the possibility of expandable graphite (EG) as an effective synergist for the self-intumescent EP system was revealed by limiting oxygen index (LOI) test. The results showed that the incorporation of EG increased the LOI value of EP/APP8-Cu₂O2 obviously. The highest LOI value was obtained at the EG/APP8-Cu₂O2 mass ratio of 3/7, indicating the optimal synergistic effect being achieved. Furthermore, UL-94 test results showed that the excellent synergistic effect resulted in the addition of 13 wt% EG/APP8-Cu₂O2 of 3/7 not only endowed EP a relatively high LOI value of 34.3%, but also made it pass UL-94 V-0 rating. Moreover, the main fire hazard parameters obtained from cone calorimeter tests, such as peak heat release rate, total smoke production, and peak CO production were reduced 40.3%, 30.3%, and 46.2%, respectively by the combination effect of EG/APP8-Cu₂O2 with mass ratio of 3/7, suggesting the excellent improvement in the fire safety of EP significantly. Finally, a possible action mode, which would be beneficial for developing other flame retardant polymers with high fire safety, was proposed.