Crystallization,morphology, and mechanical behavior of polylactide/poly(ε‐caprolactone) blends

Optically pure polylactides, poly(L ‐lactide) (PLLA) and poly(D ‐lactide) (PDLA), were blended across the range of compositions with poly(ε‐caprolactone) (PCL) to study their crystallization, morphology, and mechanical behavior. Differential scanning calorimetry and dynamic mechanical analysis (DMA) of the PLA/PCL blends showed two T_gs at positions close to the pure components revealing phase separation. However, a shift in the tan δ peak position by DMA from 64 to 57°C suggests a partial solubility of PCL in the PLA‐rich phase. Scanning electron microscopy reveals phase separation and a transition in the phase morphology from spherical to interconnected domains as the equimolar blend approaches from the outermost compositions. The spherulitic growth of both PLA and PCL in the blends was followed by polarized optical microscopy at 140 and 37°C. From tensile tests at speed of 50 mm/min Young's modulus values between 5.2 and 0.4 GPa, strength values between 56 and 12 MPa, and strain at break values between 1 and 400% were obtained varying the blend composition. The viscoelastic properties (E′ and tan δ) obtained at frequency of 1 Hz by DMA are discussed and are found consistent with composition, phase separation, and crystallization behavior of the blends. POLYM. ENG. SCI., 46:1299–1308, 2006. © 2006 Society of Plastics Engineers     

Poly(lactide)-based supramolecular polymers driven by self-complementary quadruple hydrogen bonds: construction,crystallization and mechanical properties

A series of poly(lactide) (PLA)-based supramolecular polymers based on linear PLLA-b-PCL-b-PLLA triblock copolymers (PLLA, poly(l -lactide); PCL, poly(ε-caprolactone)) or/and three-arm star (PCL-b-PDLA)₃ block copolymers (PDLA, poly(d -lactide)) were synthesized. The effects of the structure and composition on crystal structure, crystallization behavior, spherulite morphology and mechanical properties of the synthesized supramolecular polymers were investigated. The results of DSC and polarized optical microscopy indicated that the supramolecular polymer exhibited poor crystallization ability with respect to PCL/PLA block copolymer, and the crystallinity of the supramolecular polymer with alternating PCL/PLA multiblock structure was stronger than that with similar crosslinked network structure. The presence of molten PCL blocks disturbed the orientation of lamellae, forming spherulites with feather-like dendrites, and ring-banded spherulites were observed as the molecular weight of the PLA blocks increased. The results of tensile tests demonstrated that supramolecular polymers with larger molecular weight of PLA blocks showed the pronounced ductile fracture. On this basis, stereocomplexed supramolecular polymers were also synthesized, and it was found that the stereocomplex crystals had a significant impact on the crystallization and mechanical properties of the supramolecular polymers. Therefore, in this work a novel technique for manufacturing toughened PLA-based material and tuning its performances is proposed, which may promote the application of PLA-based materials in more fields. © 2022 Society of Industrial Chemistry.     

Toward environment‐friendly composites of poly(ε‐caprolactone) reinforced with stereocomplex‐type poly(l‐lactide)/poly(d‐lactide)

In this work, stereocomplex‐poly(l ‐ and d ‐lactide) (sc‐PLA) was incorporated into poly(ε‐caprolactone) (PCL) to fabricate a novel biodegradable polymer composite. PCL/sc‐PLA composites were prepared by solution casting at sc‐PLA loadings of 5–30 wt %. Differential scanning calorimetry (DSC) and wide‐angle X‐ray diffraction (WAXD) demonstrated the formation of the stereocomplex in the blends. DSC and WAXD curves also indicated that the addition of sc‐PLA did not alter the crystal structure of PCL. Rheology and mechanical properties of neat PCL and the PCL/sc‐PLA composites were investigated in detail. Rheological measurements indicated that the composites exhibited evident solid‐like response in the low frequency region as the sc‐PLA loadings reached up to 20 wt %. Moreover, the long‐range motion of PCL chains was highly restrained. Dynamic mechanical analysis showed that the storage modulus (E′) of PCL in the composites was improved and the glass transition temperature values were hardly changed after the addition of sc‐PLA. Tensile tests showed that the Young's modulus, and yield strength of the composites were enhanced by the addition of sc‐PLA while the tensile strength and elongation at break were reduced. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40208.     

Effect of poly(ε-caprolactone) and titanium (IV) dioxide content on the UV and hydrolytic degradation of poly(lactic acid)/poly(ε-caprolactone) blends

The effect of accelerated weathering degradation on the properties of poly(lactic acid) (PLA)/poly(ε-caprolactone) (PCL) blends and PLA/PCL/titanium (IV) dioxide (TiO₂) nanocomposites are presented in this paper. The results show that both polymers are susceptible to weathering degradation, but their degradation rates are different and are also influenced by the presence of TiO₂ in the samples. Visual, microscopic and atomic force microsocpy observations of the surface after accelerated weathering tests confirmed that degradation occurred faster in the PLA/PCL blends than in the PLA/PCL/TiO₂ nanocomposites. The X-ray diffraction results showed the degradation of PCL in the disappearance of its characteristic peaks over weathering time, and also confirmed that PLA lost its amorphous character and developed crystals from the shorter chains formed as a result of degradative chain scission. It was further observed that the presence of TiO₂ retarded the degradation of both PLA and PCL. These results were supported by the differential scanning calorimetry results. The thermogravimetric analysis results confirmed that that PLA and PCL respectively influenced each other's thermal degradation, and that TiO₂ played a role in the thermal degradation of both PLA and PCL. The tensile properties of both PLA/PCL and PLA/PCL/TiO₂ were significantly reduced through weathering exposure and the incorporation of TiO₂.     

Morphology,mechanical properties,and durability of poly(lactic acid) plasticized with Di(isononyl) cyclohexane‐1,2‐dicarboxylate

Di(isononyl) cyclohexane‐1,2‐dicarboxylate (DINCH) was used as a new plasticizer for poly(lactic acid) (PLA), and the effects of DINCH and tributyl citrate ester (TBC) on the morphology, mechanical and thermal properties, and durability of PLA were compared. DINCH has limited compatibility with PLA, leading to PLA/DINCH blends with phase separation in which DINCH forms spherical dispersed phase. TBC is compatible with PLA and evenly distributed in PLA. Plasticized PLA with 10 and 20 phr DINCH have a constant glass transition temperature (T_g) of 50°C and are stiff materials with high elongation at break and impact strength. TBC could significantly decrease the T_g and increase the crystallinity of PLA, and PLA/TBC (100/20) blend is a soft material with a T_g of 24°C. The durability of plasticized PLA was characterized by weight loss measurement under water immersion, mechanical properties, and thermal analysis. The results reveal that PLA/DINCH blends have better water resistance and aging resistance properties than PLA/TBC blends, which is attributed to the relatively high hydrophobicity of DINCH and high T_g of PLA/DINCH blends. POLYM. ENG. SCI., 2009. © 2009 Society of Plastics Engineers     

Synthesis of biodegradable and flexible,polylactic acid based,thermoplastic polyurethane with high gas barrier properties

Polylactic acid (PLA) has the beneficial properties of good mechanical strength, biodegradability and biocompatibility, and these properties make it suitable for use as an environmentally friendly packaging material. However, its use has been limited by its brittleness and poor stability. In this work, we successfully developed an efficient synthesis scheme to improve the mechanical properties, flexibility and gas barrier properties of PLA‐based polymers. Four different PLA‐based thermoplastic polyurethane (PLAPU) polymers were synthesized through the reaction of PLA diol with hexamethylene diisocyanate, followed by chain extension with polycaprolactone (PCL) diol. The relative compositions of the hard PLA and the soft PCL diols in the PLAPU polymers were controlled systematically to optimize the physical properties of the polymers. For example, increasing the content of PCL resulted in higher molecular weight PLAPU polymers that had increased tensile strengths and elongations at break, but their moduli were decreased. At the optimized PLA:PCL ratio of 1:3, the PLAPU polymer had an excellent elongation at break of 1053% with a relatively high Young's modulus of 51.8 MPa. In addition, the gas barrier properties of the PLAPUs were significantly enhanced depending on the molecular weight and PCL content of the polymers. To demonstrate the feasibility of using PLAPU polymers for biodegradable packaging materials, hydrolytic degradation tests were performed in phosphate buffer solution, and the PLAPU polymers were degraded gradually at rates that depended on the content of PCL in the polymers. This optimized PLAPU polymer exhibited excellent flexibility and gas barrier property, as well as high elongation, demonstrating its potential utility as packaging materials. © 2013 Society of Chemical Industry     

Study on the Crystallization,Miscibility, Morphology,Properties of Poly(lactic acid)/Poly(ε-caprolactone) Blends

A series of blends of poly(lactic acid) (PLA) and poly(ε-caprolactone) (PCL) with different mass ratio were prepared by means of the melt blending method to study their crystallization, miscibility, morphology, and thermal and mechanical properties. The result of DSC tests showed that the melting temperatures of PLA and PCL shifted toward each other, and that the largest shift appeared at the PLA₇₀PCL₃₀ blend. This result reveals that the PLA₇₀PCL₃₀ blend gives the strongest interaction intensity among the blends. Combined the result of dynamic mechanical analysis and SEM morphologies, it was found that PLA and PCL form a partial miscible blend, in which an amount of amorphous PCL (amorphous PLA) is dissolved in the PLA-rich phase (PCL-rich phase), leading to a depression of the T_g. value. The polarized optical micrographs showed that PCL can serve as a nucleating agent to promote PLA crystallization in the PLA/PCL blend. Moreover, the PLA₇₀PCL₃₀ blend gave the largest growth rate of PLA spherulite. Finally, the mechanical property of PLA/PCL blends indicated that PLA can easily be tuned from rigid to ductile by the addition of PCL.     

A comparative study of poly(l‐lactide)‐block‐poly(ϵ‐caprolactone) six‐armed star diblock copolymers and polylactide/poly(ϵ‐caprolactone) blends

This paper deals with the synthesis of a series of six‐armed star diblock copolymers based on poly(l ‐lactide) (PLLA) and poly(?‐caprolactone) (PCL) by ring‐opening polymerization using stannous octoate as catalyst and the preparation of polylactide (PLA)/PCL linear blends using a solution blending technique, while keeping the PLA‐to‐PCL ratio comparable in both systems. The thermal, rheological and mechanical properties of the copolymers and the blends were comparatively studied. The melting point and the degree of crystallinity were found to be lower for the copolymers than the blends due to poor folding property of star copolymers. Dynamic rheology revealed that the star polymers have lower elastic modulus, storage modulus and viscosity as compared to the corresponding blends with similar composition. The blends show two‐phase dispersed morphology whereas the copolymers exhibited microphase separated morphology with elongated (worm‐like) microdomains. The crystalline structures of the copolymers were characterized by larger crystallites than their blend counterparts, as estimated using Sherrer's equation based on wide‐angle X‐ray diffraction data. © 2016 Society of Chemical Industry     

Characterization of the mechanical and thermal properties and morphological behavior of biodegradable poly(L‐lactide)/poly(ε‐caprolactone) and poly(L‐lactide)/poly(butylene succinate‐co‐L‐lactate) polymeric blends

Two series of biodegradable polymer blends were prepared from combinations of poly(L ‐lactide) (PLLA) with poly(?‐caprolactone) (PCL) and poly(butylene succinate‐co‐L ‐lactate) (PBSL) in proportions of 100/0, 90/10, 80/20, and 70/30 (based on the weight percentage). Their mechanical properties were investigated and related to their morphologies. The thermal properties, Fourier transform infrared spectroscopy, and melt flow index analysis of the binary blends and virgin polymers were then evaluated. The addition of PCL and PBSL to PLLA reduced the tensile strength and Young's modulus, whereas the elongation at break and melt flow index increased. The stress–strain curve showed that the blending of PLLA with ductile PCL and PBSL improved the toughness and increased the thermal stability of the blended polymers. A morphological analysis of the PLLA and the PLLA blends revealed that all the PLLA/PCL and PLLA/PBSL blends were immiscible with the PCL and PBSL phases finely dispersed in the PLLA‐rich phase. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Effects of a diisocyanate compatibilizer on the properties of citric acid modified thermoplastic starch/poly(lactic acid) blends

In this article, for the first time in the literature effects of phenylene diisocyanate (PDI)‐based compatibilizer on the physical and chemical properties of citric acid (CA) modified thermoplastic starch (TPS)/poly(lactic acid) (PLA) blends were investigated with respect to PDI and CA content and blend composition. The blends were prepared by melt compounding in a laboratory microcompounder. Fourier transformation infrared spectroscopy results showed that CA interacted with starch and PDI interacted by both starch and PLA through the hydroxyl groups. It was revealed from SEM micrographs that combinatorial usage of CA and PDI resulted in an improved, finer distribution of TPS in PLA matrix. This improvement affected the mechanical properties of blend, especially the toughness related properties such as impact strength and elongation at break. The thermal properties such as T_g and T_m revealed from differential scanning calorimeter analysis were in line with the morphological structure of the blends by suggesting the compatibilization phenomena in the presence of PDI and CA together. Thermogravimetric analysis showed that compatibilization of two phases improved the thermal stability of the blends. As a general conclusion, the combinatorial usage of PDI and CA can be utilized to obtain tougher PLA/TPS blends‐based materials to overcome the brittleness problem. POLYM. ENG. SCI., 53:2183–2193, 2013. © 2013 Society of Plastics Engineers     

Effect of different biopolymers and polymers on the mechanical and permeation properties of extruded PHBV cast films

The biopolymer poly‐3‐hydroxybutyrate‐co‐3‐hydroxyvalerate (PHBV) is a promising material for packaging applications but its high brittleness is challenging. To address this issue, PHBV was blended with nine different biopolymers and polymers in order to improve the processing and mechanical properties of the films. Those biopolymers were TPS, PBAT, a blend of PBAT + PLA, a blend of PBAT + PLA + filler, PCL and PBS, and the polymers TPU, PVAc, and EVA. The extruded cast films were analyzed in detail (melting temperature, crystallinity, mechanical properties, permeation properties, and surface topography). A decrease in crystallinity and Young's modulus and an increase in elongation at break and permeability were observed with increasing biopolymer/polymer concentration. In PHBV‐rich blends (≥70 wt % PHBV), the biopolymers/polymers PCL, PBAT, and TPU increased the elongation at break while only slightly increasing the permeability. Larger increases in the permeability were found for the films with PBS, PVAc, and EVA. The films of biopolymer/polymer‐rich blends (with PBAT, TPU, and EVA) had significantly different properties than pure PHBV. A strong effect on the properties was measured assuming that at certain biopolymer/polymer concentrations the coherent PHBV network is disrupted. The interpretation of the permeation values by the Maxwell–Garnett theory confirms the assumption of a phase separation. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46153.     

Quaternary ammonium‐functionalized polymers in biodegradable matrices: Physicochemical properties,morphology, and biodegradability

Quaternary ammonium‐functionalized polymers (QAFPs) based on branched structures of poly(lactic acid) (PLA) and polycaprolactone (PCL) were blended with neat matrices of PLA and PCL to improve their processability in the melt phase at 160 °C. Different formulations were prepared by varying the proportions of the components of the blends (0, 10, 20, 50, and 60 wt % of QAFP). The rheological behavior of each component and their blends was studied at 160 °C and dynamic mechanical analyses were carried out. The thermal properties of the matrices were also investigated by thermogravimetric analyses and differential scanning calorimetry; they were found to be affected by the presence of QAFPs within them. All the studied blends had a dispersed morphology, highlighted by scanning electron microscopy. The water contact angle of the blends was studied and showed that the hydrophilicity of the surfaces of the blends increased by increasing their QAFP content. The biodegradability of both the components and the blends was investigated: a decrease of the biodegradation kinetics was observed due to the presence of the quaternary ammonium groups, but the materials remain biodegradable. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45261.     

Melt processed PLA/PCL blends: Effect of processing method on phase structure,morphology, and mechanical properties

Poly(lactic acid) (PLA)‐rich poly(lactic acid)/poly(ε‐caprolactone) (PLA/PCL) blends were melt‐blended at different compositions. The compositions such as 90/10 and 80/20 were obtained using three different blending methods and processed by injection molding and hot pressing. All blends were immiscible. The crystallinity of PLA increased slightly in the presence of poly(ε‐caprolactone) (PCL), and the PCL exhibited fractionated crystallization in the presence of PLA. Injection molded specimens, compared with hot pressed specimens, presented much smaller PCL particles regardless of the blending method used. Some interfacial adhesion was observed in all cases. The stiffness of PLA/PCL blends decreased as the PCL content was increased and was independent of processing. Injection molded specimens showed ductile behavior and broke at elongation values close to 140%, while the elongation at break of the hot pressed specimens was clearly lower, most likely due to the larger size of the PCL particles. Although the impact strength of the blends remained low, it improved by approximately 200% with 30% PCL and by 350% with 40% PCL. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42641.     

Effects of polycaprolactone molecular weights on thermal and mechanical properties of polybenzoxazine

Polymer blends of polybenzoxazine (PBA‐a) and polycaprolactone (PCL) of different molecular weights (M_n = 10,000, 45,000, and 80,000 Da) were prepared at various PBA‐a/PCL mass ratios and their properties were characterized. The results from dynamic mechanical analyzer (DMA) revealed two glass transition temperatures implying phase separation of the two polymers in the studied range of the PCL contents. Moreover, a synergistic behavior in glass transition temperature (T_g) was evidently observed in these blends with a maximum T_g value of 281°C compared with the T_g value of 169°C of the PBA‐a and about ?50°C of the PCL used. The blends with higher M_n of PCL tended to provide greater T_g value than those with lower M_n of PCL. The modulus and hardness values of PBA‐a were decreased while the elongation at break and area under the stress?strain curve were increased with an increase of the content and M_n of PCL, suggesting an enhancement of toughness of the PBA‐a. Scanning electron micrographs (SEM) of the sample fracture surface are also used to confirm the improvement in toughness of the blends. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41915.     

Mechanical and thermal properties of wood fibers reinforced poly(lactic acid)/thermoplasticized starch composites

Thermoplasticized starch (TPS) filled poly(lactic acid) (PLA) blends are usually found to have low mechanical properties due to poor properties of TPS and inadequate adhesion between the TPS and PLA. The purpose of this study was to investigate the reinforcing effect of wood fibers (WF) on the mechanical properties of TPS/PLA blends. In order to improve the compatibility of wood with TPS/PLA blends, maleic anhydride grafted PLA (MA‐g‐PLA) copolymer was synthesized and used. TPS, TPS/PLA blends, and WF reinforced TPS/PLA composites were prepared by twin‐screw extrusion and injection molded. Scanning electron microscope and crystallinity studies indicated thermoplasticity in starch. WF at two different weight proportions, that is, 20% and 40% with respect to TPS content were taken and MA‐g‐PLA at 10% to the total weight was chosen to study the effect on mechanical properties. At 20% WF and 10% MA‐g‐PLA, the tensile strength exhibited 86% improvement and flexural strength exhibited about 106% improvement over TPS/PLA blends. Increasing WF content to 40% further enhanced tensile strength by 128% and flexural strength by 180% with respect to TPS/PLA blends. Thermal behavior of blends and composites was analyzed using dynamic mechanical analysis and thermogravimetric analysis. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46118.     

Semi-interpenetrating polymer networks composed of poly(l-lactide) and diisocyanate-bridged 4-arm star-shaped ɛ-caprolactone oligomers

Semi-interpenetrating polymer networks (semi-IPNs) were prepared by reactions of methylenediphenyl 4,4’-diisocyanate (MDI) and hydroxy-terminated 4-arm star-shaped ε-caprolactone oligomers (H4CLO_n's) with the degrees of polymerization per one arm, n = 3, 5 and 10 in the presence of poly(l-lactide) (PLA). Morphologies, thermal and mechanical properties of the MDI-bridged H4CLO_n (MH4CLO_n)/PLA semi-IPNs were evaluated by comparing with those of poly(?-caprolactone) (PCL)/PLA blends. Two tan δ peaks related to MH4CLO_n and PLA were observed in a dynamic mechanical curve of the semi-IPN. Although all the semi-IPNs and blends had micro-phase separated morphologies, the phase-separated droplets of MH4CLO₅/PLA 50/50 were much finer than those of PCL/PLA 50/50. Differential scanning calorimetry (DSC) analyses revealed that MH4CLO₃ and MH4CLO₅ are substantially amorphous, while MH4CLO₁₀ is semi-crystalline, and that cold crystallization of the PLA component of MH4CLO_n/PLA is more strongly disturbed for the semi-IPN with a smaller n value and more MH4CLO_n content. Tensile modulus, toughness and elongation at break of MH4CLO₅/PLA 50/50 semi-IPN were much higher than those of PCL/PLA 50/50 blend.     

Morphology and properties of biodegradable and biosourced polylactide blends with poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate)

Biodegradable polymer blends based on biosourced polymers, namely polylactide (PLA) and poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate) (P(3HB‐co‐4HB)), were prepared by melt compounding. The effects of P(3HB‐co‐4HB) on the miscibility, phase morphology, thermal behavior, mechanical properties, and biodegradability of PLA/P(3HB‐co‐4HB) blends were investigated. The blend was an immiscible system with the P(3HB‐co‐4HB) domains evenly dispersed in the PLA matrix. However, the T_g of P(3HB‐co‐4HB) component in the blends decreased compared with neat P(3HB‐co‐4HB), which might be attributed to that the presence of the phase interface between PLA and P(3HB‐co‐4HB) resulted in enhanced chain mobility near interface. The addition of P(3HB‐co‐4HB) enhanced the cold crystallization of PLA in the blends due to the nucleation enhancement of PLA caused by the enhanced chain mobility near the phase interface between PLA and P(3HB‐co‐4HB) in the immiscible blends. With the increase in P(3HB‐co‐4HB) content, the blends showed decreased tensile strength and modulus; however, the elongation at beak was increased significantly, indicating that the inherent brittlement of PLA was improved by adding P(3HB‐co‐4HB). The interesting aspect was that the biodegradability of PLA is significantly enhanced after blends preparation. POLYM. COMPOS., 2012. © 2012 Society of Plastics Engineers     

Crystallization,mechanical properties,and enzymatic degradation of biodegradable poly(ε‐caprolactone) composites with poly(lactic acid) fibers

Biodegradable polymer composites based on poly(ɛ‐caprolactone) (PCL) and poly(lactic acid) (PLA) fibers were prepared by melt compounding. The effects of PLA fibers on the crystallization, mechanical properties, and enzymatic degradation of PCL composites were investigated. The addition of PLA fibers enhanced the crystallization of PCL due to the heterogeneous nucleation effect of fibers. However, the final crystallinity of the PCL in the composites was little changed in the presence of PLA fibers. With the addition of PLA fibers, significant improvement in storage modulus (E′) of PCL in the composites was achieved. A significant increase in E′ was 173% for the composites as compared to that of the neat PCL at 20°C. With the increase in PLA fibers content, the PCL composites showed decreased elongation and strength at break; however, the tensile yield strength and modulus were increased significantly, indicating that PCL was obviously reinforced by adding PLA fibers. Although the PLA fibers retarded the enzymatic degradation of PCL, it was possible to be completely degraded without much degradation time for PCL blending with suitable amounts of PLA fibers. POLYM. COMPOS., 34:1745–1752, 2013. © 2013 Society of Plastics Engineers     

Physico-chemical,thermal, and mechanical properties of PLA-nHA nanocomposites: Effect of glass fiber reinforcement

In this study, tri-layered composites were prepared by reinforcing poly-lactic acid (PLA) nano-hydroxyapatite (n-HA) (1 and 5 wt%) and 20 mol% continuous phosphate glass fibers (PGF). Initially, the effect of addition of 1 and 5% n-HA on the structural, thermal, mechanical, and thermo-mechanical properties of 100% PLA was investigated. With 5 wt% n-HA addition the tensile modulus (TM), flexural modulus (FM), tensile strength (TS), and flexural strength (FS) of 100% PLA was improve by 14.9, 47.4, 6, and 32.9%, respectively. Whereas, the un-notched impact strength of the nanocomposites suffer 2% deterioration. However, T _g decreased by 0.3°C and T _c increased by 10°C as 5 wt% n-HA was added to 100% PLA. Afterwards, the 5% n-HA/PLA composite were reinforced with 20 mol% continuous PGF and the TM, FM, TS, and FS of the tri-layered composites were 162.6, 412.5, 28.4, and 157.4% higher as compared to 100%PLA. Furthermore, the storage modulus of the 1% n-HA-filled composites was 500 MPa lower than 100%PLA, while 5 wt% n-HA-filled composites showed similar storage modulus as 100% PLA. 5 wt% n-HA-filled composite showed the highest peak of loss modulus which may be attribute to the chain segment of PLA matrix after the incorporation of HA. Thus, n-HA and PGF reinforcement resulted in improved mechanical properties of the composites and have great potential as biodegradable bone fixation device with enhanced load-bearing ability.     

PLA/chain‐extended PEG blends with improved ductility

Melt blending of polylactic acid (PLA) and a chain‐extended polyethylene glycol (CE‐PEG) have been performed in an effort to toughen the PLA without significant loss of modulus and ultimate tensile strength. The chain‐extended PEG was prepared with melt condensation of a low molecular weight PEG and 4,4′‐methylenebis(phenylisocyanate) (MDI) for enhancement of the molecular weight of PEG. The thermal and mechanical properties, miscibility and phase morphologies of blends were investigated. By using thermal and fracture surface analysis, the blends were found to be a partially miscible system with shifted glass transition temperatures. The addition of CE‐PEG leads to slight decrease in tensile strength and modulus, while the elongation at break is characterized by an important increase (540%), compared with neat PLA and PLA/PEG (low molecular weight PEG, M_n = 35,000). The relative ductility of PLA/CE‐PEG is 40 times higher than that of neat PLA. The brittle fracture of neat PLA was transformed into a ductile fracture by the addition of CE‐PEG. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012