Efficient fluorescent white organic light-emitting diodes with blue-green host of di(4-fluorophenyl)amino-di(styryl)biphenyl

Efficient fluorescent white organic light-emitting diodes are fabricated with the use of an efficient electro-fluorescence blue-green host material di(4-fluorophenyl)amino-di(styryl)biphenyl, doped with red dye 4-(dicyano-methylene)-2-methyl-6-(julolidin-4-yl-vinyl)-4H-pyran. One resulting two-wavelength white emission device shows a maximum external quantum efficiency of 4.8% and a high power efficiency of 14.8 lm/W with 100 cd/m² at 3.8 V. The high efficiency may be attributed to the high electroluminescence character of the host, relatively high host-to-guest energy transfer efficiency, and effective device architecture.     

All-small-molecule efficient white organic light-emitting diodes by multi-layer blade coating

Blue and white small-molecule organic light-emitting diodes are fabricated by multi-layer blade coating on hot plate at 80 °C with hot wind. Uniform multi-layer structures are made without dissolution due to rapid drying. Only small molecules originally developed for vacuum deposition are used. For hole transport layer of, 4′,4″-tris(carbazol-9-yl)triphenylamine (TCTA), electron transport layer of 2,2′,2″-(1,3,5-benzinetriyl)-tris(1-phenyl-1-H-benzimidazole) (TBPI), emissive layer host of, 6-bis(3-(9H-carbazol-9-yl)phenyl)pyridine (26DCzPPy), triplet emitters of bis(3,5-difluoro-2-(2-pyridyl)phenyl-(2-carboxypyridyl)iridium(III) (FIrpic), and cathode of LiF/Al, the peak current efficiency for blue emission is 25.1 cd/A (10.8% and 9.3 lm/W). Orange emitter iridium(III)bis (4-(4-t-butylphenyl) thieno[3,2-c]pyridinato-N,C2′)acetylacetonate (PO-01-TB) is added to obtain white emission with CIE coordinate of (0.39, 0.46) [1]. The current efficiency is 34.2 cd/A (11.6% and 12 lm/W) at maximum, 32.4 cd/A at 1000 cd/m², and 31 cd/A at 10,000 cd/m².     

Organic light-emitting diode-based plausibly physiologically-friendly low color-temperature night light

Light sources with lower color temperature (CT) show markedly less suppression effect on the secretion of melatonin, an oncostatic hormone. Light sources with higher color rendering index (CRI) provide better visual comfort. In this report, we demonstrate the design and fabrication of low CT, high CRI fluorescent organic light-emitting diode (OLED) with five-band emitting from a single emissive layer. The best performed device exhibits a CT of 1773 K, much lower than that of candles (1800–2000 K) or incandescent bulbs (2000–2500 K), 87 CRI, a beyond theoretical limit external quantum efficiency (EQE) 6.4%, and 11.9 lm/W at 100 cd/m². One major reason for having the ultra-low CT and relative high CRI may be attributed to the significantly intensive deep red emission. The comparatively high efficacy and EQE may be attributed to the employment of a smooth stepwise energy-level structure, enabling low injection barriers and balance carrier injection.     

Efficient fluorescent white organic light-emitting diodes using co-host/emitter dual-role possessed di(triphenyl-amine)-1,4-divinyl-naphthalene

Efficient fluorescent white organic light-emitting diodes with low carrier-injection barriers were fabricated with device structure of indium tin oxide/N,N′-bis-(1-naphthy)-N,N′-diphenyl-1,1′-biphenyl-4-4′-diamine/white emission layer/1,3,5-tris(N-phenyl-benzimidazol-2-yl)benzene/lithium fluoride/aluminium. By blending in the blue host of 1-butyl-9,10-naphthalene-anthracene in the emissive layer an efficient electro-luminescent greenish-blue co-host of di(triphenyl-amine)-1,4-divinyl-naphthalene, with the doping of a trace amount of red dye of 4-(dicyano-methylene)-2-methyl-6-(julolidin-4-yl-vinyl)-4H-pyran, bright and colour-stable white emission with high power-efficiency of 14.6 lm/W at 100 cd/m² or current efficiency of 19.2 cd/A at 300 cd/m² or 18.7 cd/A at 10,000 cd/m² was obtained. The resulted synergistic increase in brightness and efficiency may be attributed to the presence of cascading new routes with comparatively lower electron injection barrier.     

Flexible top-emitting warm-white organic light-emitting diodes with highly luminous performances and extremely stable chromaticity

The flexible top-emitting white organic light-emitting diode (FTEWOLED) with a very high efficiency but a significant color alteration is achieved with a blue/red/blue sandwiched tri-emission-layer. The voltage-dependent recombination region alternation and the emission mechanism are systematically investigated through a delta-doping method and the time-resolved transient photoluminescence lifetime measurement. By locating the main exciton recombination region at the 4,4′,4″-Tris(carbazol-9-yl)-triphenylamine (TCTA) and 9,9-spirobifluoren-2-yl-diphenyl-phosphine oxide (SPPO1) interface, replacing the carrier-trapping red dopant guest with an orange guest that utilizes energy transfer mechanism, and using a P–I–N structure together with the FIrpic blue guest dopant to balance the electron and hole carriers, an extremely color stable and a very high efficient FTEWOLED is fabricated, with the resulting high current and power efficiencies of 22.7 cd/A and 14.27 lm/W, and a warm white illumination with a small chromaticity variation of (−0.0087, +0.0015) over a broad luminance range of more than four orders of magnitude. In addition, the performances can be further improved to 23,340 cd/m², 24.49 cd/A and 15.39 lm/W with a slight concentration alteration of the orange emitter.     

Low driving voltage white organic light-emitting diodes with high efficiency and low efficiency roll-off

Single emission layer white organic light-emitting diodes (WOLEDs) showing high color stability, low turn-on voltage, high efficiency and low efficiency roll-off by incorporating iridium(III) bis[(4,6-difluo-rophenyl)-pyridinato-N,C2] (FIrpic) and bis(2-phenylbenzothiazolato) (acetylacetonate)iridium(III) (Ir(BT)₂(acac)) phosphors dyes have been demonstrated. Our WOLEDs without any out-coupling schemes as well as n-doping strategies show low operating voltages, low turn-on voltage (defined for voltage to obtain a luminance of 1 cd/m²) of 2.35 V, 79.2 cd/m² at 2.6 V, 940.5 cd/m² at 3.0 V and 10 300 cd/m² at 4.0 V, respectively, and achieve a current efficiency of 40.5 cd/A, a power efficiency of 42.6 lm/W at a practical brightness of 1000 cd/m², and a low efficiency roll-off 14.7% calculated from the maximum efficiency value to that of 5000 cd/m². Such improved properties are attributed to phosphors assisted carriers transport for achieving charge carrier balance in the single light-emitting layer (EML). Meanwhile the host–guest energy transfer and direct exciton formation process are two parallel pathways serve to channel the overall excitons to dopants, greatly reduced the unfavorable energy losses.     

Efficient simplified orange and white phosphorescent organic light-emitting devices with reduced efficiency roll-off

Efficient orange phosphorescent organic light-emitting devices based on simplified structure with maximum efficiencies of 46.5 lm/W and 51.5 cd/A were reported. One device had extremely low efficiency roll-off with efficiencies of 50.6 cd/A, 45.0 cd/A and 39.2 cd/A at 1000 cd/m², 5000 cd/m² and 10,000 cd/m² respectively. The reduced efficiency roll-off was attributed to more balanced carrier injection and broader recombination zone. The designed simplified white device showed much lower efficiency roll-off than the control one based on multiple emitting layers. The efficiency of simplified white device was 40.8 cd/A at 1000 cd/m² with Commission Internationale de I’Eclairage coordinates of (0.39, 0.46).     

Doping-free orange and white phosphorescent organic light-emitting diodes with ultra-simply structure and excellent color stability

We demonstrate simplified doping-free orange phosphorescent organic light-emitting diodes (OLEDs) based on ultrathin emission layer. The optimized orange device has the maximum current efficiency of 52.1 cd/A and power efficiency of 36.3 lm/W, respectively. Efficient simplified doping-free white OLEDs employing blue and orange ultrathin emission layers have excellent color stability, which is attributed to the avoidance of the movement of charges recombination zone and no differential color aging. One white device exhibits high efficiency of 33.6 cd/A (30.1 lm/W). Moreover, the emission mechanism of doping-free orange and white OLEDs is also discussed.     

Efficient solution-processed green and white phosphorescence organic light-emitting diodes based on bipolar host materials

Four carbazole-based bipolar host materials are utilized for solution-processed phosphorescent organic light-emitting diodes (PhOLEDs). These bipolar materials consist of an electron-donor unit (carbazole) linking to a fluorene unit bearing various electron-acceptor units (oxadiazole, cyano, and benzimidazole) via a saturated carbon, giving sufficiently high triplet energies due to the lack of direct electronic coupling between the donor and acceptor(s). The resulting physical properties and bipolar characteristics render the realization of efficient solution-processed green and white OLEDs feasible. The best green light-emitting device based on bipolar host CzFCBI incorporating a stepwise hole-injection/transporting system exhibit a low drive voltage, a maximum external quantum efficiency of 14.0%, a current efficiency of 49.0 cd/A, and a power efficacy of 55.0 lm/W. Moreover, the CzFOXa-based two-component (blue–orange) white light-emitting device shows a warmish-white emission with a maximum external quantum efficiency of 6.9% and stable chromaticity coordinates at different luminance levels and yield a high color rendering index (CRI) reaching 76 at a luminance of 1000 cd/m².     

An efficient bis(2-phenylquinoline) (acetylacetonate) iridium(III)-based red organic light-emitting diode with alternating guest:host emitting layers

We report a highly efficient electrophosphorescent bis(2-phenylquinoline) (acetylacetonate) iridium(III) [Ir(2-phq)₂(acac)]-based red organic light-emitting diode. The emission layer consists of a periodic thin layer of guest material of Ir(2-phq)₂(acac) separated by host material of 4,4′-Bis(carbazol-9-yl)biphenyl. The guest and host thicknesses were optimized independently to obtain the best performance. The current efficiency reaches to a maximum of 16.2 cd/A then drops to 15 and 11 cd/A at brightness of 10 and 100 cd/m², respectively. By reducing the thickness of the host layer, the power efficiency was further improved. Device with a maximum power efficiency of 8.3 lm/W was obtained. We also found that the concentration quenching in Ir(2-phq)₂(acac) is dominated by molecular aggregation. Excitonic quenching by radiationless Förster process is miniscule.     

A hybrid white organic light-emitting diode with stable color and reduced efficiency roll-off by using a bipolar charge carrier switch

A hybrid white organic light-emitting diode (WOLED) with an emission layer (EML) structure composed of red phosphorescent EML/green phosphorescent EML/spacer/blue fluorescent EML was demonstrated. This hybrid WOLED shows high efficiency, stable spectral emission and low efficiency roll-off at high luminance. We have attributed the significant improvement to the wide distribution of excitons and the effective control of charge carriers in EMLs by using mixed 4,4′,4″-tri(9-carbazoyl) triphenylamine (TCTA) and bis[2-(2-hydroxyphenyl)-pyridine] beryllium (Bepp₂) as the host of phosphorescent EMLs as well as the spacer. The bipolar mixed TCTA:Bepp_2, which was proved to be a charge carrier switch by regulating the distribution of charge carriers and then the exciton recombination zone, plays an important role in improving the efficiency, stabilizing the spectrum and reducing the efficiency roll-off at high luminous. The hybrid WOLED exhibits a current efficiency of 30.2 cd/A, a power efficiency of 32.0 lm/W and an external quantum efficiency of 13.4% at a luminance of 100 cd/m², and keeps a current efficiency of 30.8 cd/A, a power efficiency of 27.1 lm/W and an external quantum efficiency of 13.7% at a 1000 cd/m². The Commission Internationale de l’Eclairage (CIE) coordinates of (0.43, 0.43) and the color rendering index (CRI) of 89 remain nearly unchanged in the whole range of luminance.     

Small molecule interlayer for solution processed phosphorescent organic light emitting device

Using a 4,4′,4′′-tris(N-carbazolyl)-triphenylamine (TCTA) small molecule interlayer, we have fabricated efficient green phosphorescent organic light emitting devices by solution process. Significantly a low driving voltage of 3.0 V to reach a luminance of 1000 cd/m² is reported in this device. The maximum current and power efficiency values of 27.2 cd/A and 17.8 lm/W with TCTA interlayer (thickness 30 nm) and 33.7 cd/A and 19.6 lm/W with 40 nm thick interlayer are demonstrated, respectively. Results reveal a way to fabricate the phosphorescent organic light emitting device using TCTA small molecule interlayer by solution process, promising for efficient and simple manufacturing.     

Color stable phosphorescent white organic light-emitting diodes with double emissive layer structure

In this paper, we report color stable phosphorescent white organic light-emitting diodes (OLEDs) based on a double emissive layer (EML) structure composed of blue and red/green phosphorescent units. Deep hole trapping situation of red and green dopants at the red/green EML could induce less voltage dependent white spectral characteristics by restricting the change of exciton generation zone. A wide band-gap host material, 2,6-bis(3-(carbazol-9-yl)phenyl)pyridine (26DCzPPy), was used for achieving such deep-trap generation. Fabricated phosphorescent white OLED shows a slight color coordinate change of (?0.002, +0.002) from 1000 cd/m² to 5000 cd/m² with power efficiency of 38.7 lm/W and current efficiency of 46.4 cd/A at 1000 cd/m². In addition, negligible color changes were observed by delaying red dopant saturation time using optimum red dopant concentration.     

Efficient non-doped monochrome and white phosphorescent organic light-emitting diodes based on ultrathin emissive layers

Efficient red, orange, green and blue monochrome phosphorescent organic light-emitting diodes (OLEDs) with simplified structure were fabricated based on ultrathin emissive layers. The maximum efficiencies of red, orange, green and blue OLEDs are 19.3 cd/A (17.3 lm/W), 45.7 cd/A (43.2 lm/W), 46.3 cd/A (41.6 lm/W) and 11.9 cd/A (9.2 lm/W). Moreover, efficient and color stable white OLEDs based on two complementary colors of orange/blue, three colors of red/orange/blue, and four colors of red/orange/green/blue were demonstrated. The two colors, three colors and four colors white OLEDs have maximum efficiencies of 30.9 cd/A (27.7 lm/W), 30.3 cd/A (27.2 lm/W) and 28.9 cd/A (26.0 lm/W), respectively. And we also discussed the emission mechanism of the designed monochrome and white devices.     

Single-emission-layer white organic light-emitting devices: Chromaticity and colour-rendering consideration

The chromaticity and colour-rendering capability of solution-processed single emission layer (EML) white organic light-emitting diodes (W-OLEDs) can be precisely tuned by manipulating the dopant compositions in the EMLs. In this work, we numerically modelled binary, ternary, and quaternary doping single EML W-OLEDs. The correlated colour temperature (CCT), colour-rendering index (CRI), and spectral designs were correlated. The simulation predicted that the quaternary doping system possesses the best chromaticity performance. The corresponding binary, ternary and quaternary doping single EML W-OLEDs were fabricated and characterised to verify the calculation. The solution-processed quaternary doping W-OLEDs were designed with CRI values up to 85, deviations from the Planckian locus (D_u′v′) as low as +0.0009, an EQE of 13.7%, a power efficacy of 14.7 lm/W and current efficiency of up to 24.9 cd/A at 1000 cd/m².     

Highly enhanced light extraction from organic light emitting diodes with little image blurring and good color stability

We report a highly enhanced light extraction from a top emission organic light emitting diode with little image blurring and color variation with viewing angle. Direct integration of a high refractive index micro lens array on the top of the transparent indium zinc oxide top electrode of a green phosphorescent OLED showed a significant enhancement of light extraction to get EQE of 44.7% from 27.6%, the power efficiency of 134.7 lm/w from 85.9 lm/W and the current efficiency of 217.2 cd/A from 120.7 cd/A without image blurring. In addition, the device showed excellent color stability on viewing angle with Commission Internationale de l’Eclairage (CIE) coordinate of Δx = 0.01, Δy = 0.01 as the viewing angle varied from 0° to 60°.     

Stable efficiency roll-off in blue phosphorescent organic light-emitting diodes by host layer engineering

The device characteristics of blue phosphorescent organic light-emitting diodes (PHOLEDs) with mixed host structure were investigated by changing the combination and the composition of host materials in emissive layer. The distributed recombination zone and balanced charge carrier injection within emissive layer were achieved through mixed host optimization with a hole transport-type and an electron transport-type host materials, therefore the device performances were greatly enhanced, with external quantum and power efficiencies of 21.8% and 53 lm/W. Moreover, mixed host blue PHOLEDs exhibited a extremely low stable efficiency roll-off with quantum efficiencies of 20.3% and 18.6% at a luminance of 1000 and 10,000 cd/m².     

Four-wavelength white organic light-emitting diodes using 4,4′-bis-[carbazoyl-(9)]-stilbene as a deep blue emissive layer

White organic light-emitting diodes (WOLEDs) with four wavelengths were fabricated by using three doped layers, which were obtained by separating recombination zones into three emitter layers. Among these emitters, blue emissions with two wavelengths (456 and 487 nm) were occurred in the 4,4′-bis(carbazoyl-(9))-stilbene (BCS) host doped with a perylene dye. Also, a green emission was originated from the tris(8-quinolinolato)aluminum (III) (Alq₃) host doped with a green fluorescent of 10-(2-benzothiazolyl)-1,1,7,7-tetramethyl-2,3,6,7-tetrahydro-1H,5H,11H-[1]benzopyrano [6,7,8-ij]-quinolizin-11-one (C545T) dye. Finally, an orange emission was obtained from the N,N′-bis(1-naphthyl)-N,N′-diphenyl-1,1′-biphenyl-4,4′-diamine (NPB) host doped with a 4-(dicyanomethylene)-2-tert-butyl-6-(1,1,7,7-tetramethyljulolidyl-9-enyl)-4H-pyran (DCJTB) dye. The white light could be emitted by simultaneously controlling the emitter thickness and concentration of fluorescent dyes in each emissive layer, resulting in partial excitations among those three emitter layers. Electroluminescent spectra of the device obtained in this study were not sensitive to driving voltage of the device. Also, the maximum luminance for the white OLED with the CIE coordinate of (0.34, 0.34) was 56,300 cd/m² at the applied bias voltage of 11.6 V. Also, its external quantum and the power efficiency at about 100 cd/m² were 1.68% and 2.41 lm/W, respectively.     

New hole blocking material for green-emitting phosphorescent organic electroluminescent devices

The new amorphous molecular material, 2,5-bis(4-triphenylsilanyl-phenyl)-[1,3,4]oxadiazole, that functions as good hole blocker as well as electron transporting layer in the phosphorescent devices. The obtained material forms homogeneous and stable amorphous film. The new synthesized showed the reversible cathodic reduction for hole blocking material and the low reduction potential for electron transporting material in organic electroluminescent (EL) devices. The fabricated devices exhibited high performance with high current efficiency and power efficiency of 45 cd/A and 17.7 lm/W in 10 mA/cm², which is superior to the result of the device using BAlq (current efficiency: 31.5 cd/A and power efficiency: 13.5 lm/W in 10 mA/cm²) as well-known hole blocker. The ITO/DNTPD/α-NPD/6% Ir(ppy)₃ doped CBP/2,5-bis(4-triphenylsilanyl-phenyl)-[1,3,4]oxadiazole as both hole blocking and electron transporting layer/Al device showed efficiency of 45 cd/A and maximum brightness of 3000 cd/m² in 10 mA/cm².     

High performance top-emitting and transparent white organic light-emitting diodes based on Al/Cu/TcTa transparent electrodes for active matrix displays and lighting applications

It is challenging to obtain broadband emission covering as much of the visible light spectrum as possible in top-emitting white organic light-emitting diodes (TEWOLEDs) due to the well known microcavity effects. In this work, we achieved TEWOLED with three separate peak and negligible angular dependence by employing a high transmittance stack cathode Al (2 nm)/Cu (18)/TcTa (60 nm). The TEWOLED shows an efficiency of 25.6 cd/A, 20.1 Lm/W at 1000 cd/m², and low voltage of 4.2 V for 1222 cd/m². Synchronously, we achieved transparent white organic light-emitting diode (TWOLED) using this high transmittance stack cathode, the TWOLED exhibits similar spectrum and comparable luminance from both sides, and the maximum total efficiencies of the TWOLED are 28.6 cd/A, 24.9 Lm/W.