共查询到20条相似文献,搜索用时 109 毫秒
1.
基于ARM9的电梯缓冲器复位时间测试仪的设计 总被引:1,自引:1,他引:0
介绍了以三星S3C2410微处理器为内核,设计了一种基于Windows CE 5.0嵌入式系统的新型电梯检测装置。克服了传统的缓冲器复位时间检测精度低,人为因素占主要地位,结果分散性大的缺点,新型测试仪实现了缓冲器复位过程的动态监测及结果的自动检验。系统总体包括数据采集、数据存储、LCD触摸显示、串口和USB通讯、应用程序等。 相似文献
2.
3.
4.
5.
6.
7.
电梯轿厢意外移动保护装置是保障电梯安全正常运行的基础,该装置不仅能够实现数据的分析与处理,也能实现电梯运行的风险分析与管控,为电梯故障的处理提供了数据支持。此外,通过应用设备检测装置能够实现电梯的实时监控,进而保障电梯的正常运行,降低故障发生率。本文结合电梯轿厢运行的实际特点与意外移动保护装置运行的技术安全要求,对该装置的技术安全要求以及发展现状进行研究分析,希望能为电梯的安全运行提供合理的建议。 相似文献
8.
9.
介绍了RS-485串行通信总线的特点及其在电梯控制中的应用,阐述了电梯轿厢,厅门信号传输与控制的工作原理,给出了系统的硬件实现和软件设计思路。 相似文献
10.
11.
用于巨磁阻生物传感器检测的模拟前端电路 总被引:1,自引:0,他引:1
提出一种用于巨磁阻(GMR)生物传感器检测的模拟前端电路。电路采用电压检测的方法,包括基准电压源,单位增益缓冲器,电荷转移型开关电容采样保持电路,流水线模数转换器四部分;基准电压源用于产生传感器阵列的片内激励电压;传感器阵列的检测输出电压经单位增益缓冲器后,由开关电容采样保持电路进行采样,保持,放大;最后经过流水线模数转换器输出数字码流;芯片采用SMIC 0.18μm 1P6M CMOS厚栅氧工艺实现。测试结果表明,在电源电压3.3 V,20 MHz时钟下测试,整体电路输出信号有效精度达到7.2 bit,功耗33 mW,满足GMR生物传感器的检测要求。 相似文献
12.
建筑的必要设备就是电梯,在很多方面电梯都在发挥着积极的作用,随着我国经济的发展和进步,电梯的各个部分也在不断得到优化,社会上开始广泛的应用电梯,因此电梯的安全回路得到人们的广泛关注,如果发生任何安全问题,对于内部的安全会起到很大的影响,对于所属的建筑具有很大的威胁。本文主要针对电梯的安全回路进行论述,并提出改进设想。 相似文献
13.
电梯自动控制系统是电梯运行的关键,在保障电梯高效安全的运行具有重要作用。文中采用MCS-51单片机,针对电梯运行的原理、电路设计进行了分析,并对电梯选择的操作系统结构进行了优化研究。实验证明,单片机在电梯自动控制中将运行的不同模式看做电梯中不同楼层的不同请求,可有效提高电梯的进程效率。 相似文献
14.
15.
16.
针对电梯老龄化导致的电梯安全隐患问题,设计了一款电梯故障信息采集器。采集器基于LM3S6432处理器和RT-Thread操作系统设计,详细分析了系统的硬件设计和软件设计。软件设计包括传感器信号采集、电梯主状态生成、电梯故障判别和信息传输几个模块。经过现场测试,该设备运行良好。 相似文献
17.
18.
本文介绍了一种以P87C591单片机为主控器,以谷物流量传感器、谷物湿度传感器、割台高度传感器、地速传感器、升运器转速传感器、DGPS接收机、变量作业控制和智能控制终端为主要外围元件的联合收割机智能控制系统。此系统具有显示直观、准确,使用方便、可靠等优点,代表了联合收割机智能控制系统的最新发展趋势。在系统设计过程中充分考虑了性价比,选用价格低、性能稳定的元器件。通过运行调试,试验结果与设计要求基本一致。 相似文献
19.
An electronic control system with speed feedback to achieve excellent riding comfort and accurate floor-levelling in medium-speed elevators driven by squirrel-cage induction motors is described. Stepless control of both acceleration and deceleration of the elevator car is obtained, employing only two thyristors and two diodes in the power control circuit. Accurate floor levelling and smooth deceleration are achieved using a novel digital speed-reference circuit which uses programmable memory to generate the speed pattern directly as a function of the position of the elevator car. The system described is simpler, lower in cost, and easier to maintain compared to dc motor-driven elevators of the same performance for car speeds up to 2 m/s. 相似文献
20.
Wen-Yaw Chung Yeong-Tsair Lin Chung-Huang Yang Alfred Krzyskow 《Microelectronics Journal》2006,37(10):1105-1114
An integrated and new interface circuit with temperature compensation has been developed to enhance the ISFET readout circuit stability. The bridge-type floating source circuit suitable for sensor array processing has been proposed to maintain reliable constant drain-source voltage and constant drain current (CVCC) conditions for measuring the threshold voltage variation of ISFET due to the corresponding hydrogen ion concentration in the buffer solution. The proposed circuitry applied to Si3N4 and Al2O3-gate ISFETs demonstrate a variation of the drain current less than 0.1 μA and drain-source voltage less than 1 mV for the buffer solutions with the pH value changed from 2 to 12. In addition, the scaling circuitry with the VT temperature correction unit (extractor) and LABVIEW software are used to compensate the ISFET thermal characteristics. Experimental results show that the temperature dependence of the Si3N4-gate ISFET sensor improved from 8 mV/°C to less than 0.8 mV/°C. 相似文献