新型古币形超宽带分形印刷天线的设计

共面波导和分形结构结合应用,在展宽天线带宽方面具有独特优势.提出了一种新型古币形超宽带分形天线,采用共面波导馈电,并加载分形缝隙,天线的阻抗带宽大幅提高.给出了天线的表面电流、回波损耗、方向图和增益结果.对3阶分形天线进行了加工与测试,测试结果表明,天线带宽达到2.6～16 GHz,带宽比大于6:1.仿真结果与测试结果基本吻合,为超宽带小型化天线的设计提供了新的思路．     

CPW-fed ultra wideband slot antenna with arc-shaped stub

An ultra wideband coplanar waveguide (CPW) fed slot antenna is presented. A rectangular slot antenna is excited by a 50-CPW with an arc-shaped tuning stub. For the proposed antenna, the 210 dB return loss bandwidth could reach 15.6 GHz (3.7-19.3 GHz), which is about 135% with respect to the centre frequency of 11.5 GHz. Details of the antenna design, simulation and measured results on the return loss and the E-and H-plane radiation patterns of the proposed antenna are presented.     

A Novel Compact Highly Isolated UWB MIMO Antenna with WLAN Notch

This paper presents a compact Multiple Input Multiple Output (MIMO) antenna with WLAN band notch for Ultra-Wideband (UWB) applications. The antenna is designed on 0.8 mm thick low-cost FR-4 substrate having a compact size of 22 mm × 30 mm. The proposed antenna comprises of two monopole patches on the top layer of substrate while having a shared ground on its bottom layer. The mutual coupling between adjacent patches has been reduced by using a novel stub with shared ground structure. The stub consists of complementary rectangular slots that disturb the surface current direction and thus result in reducing mutual coupling between two ports. A slot is etched in the radiating patch for WLAN band notch. The slot is used to suppress frequencies ranging from 5.1 to 5.9 GHz. The results show that the proposed antenna has a very good impedance bandwidth of |S11| < −10 dB within the frequency band from 3.1–14 GHz. A low mutual coupling of less than −23 dB is achieved within the entire UWB band. Furthermore, the antenna has a peak gain of 5.8 dB, low ECC < 0.002 and high Diversity Gain (DG > 9.98).     

Super Compact UWB Monopole Antenna for Small IoT Devices

This article introduces a novel, ultrawideband (UWB) planar monopole antenna printed on Roger RT/5880 substrate in a compact size for small Internet of Things (IoT) applications. The total electrical dimensions of the proposed compact UWB antenna are 0.19 λ_o × 0.215 λ_o × 0.0196 λ_o with the overall physical sizes of 15 mm × 17 mm × 1.548 mm at the lower resonance frequency of 3.8 GHz. The planar monopole antenna is fed through the linearly tapered microstrip line on a partially structured ground plane to achieve optimum impedance matching for UWB operation. The proposed compact UWB antenna has an operation bandwidth of 9.53 GHz from 3.026 GHz up to 12.556 GHz at −10 dB return loss with a fractional bandwidth (FBW) of about 122%. The numerically computed and experimentally measured results agree well in between. A detailed time-domain analysis is additionally accomplished to verify the radiation efficiency of the proposed antenna design for the ultra-wideband signal propagation. The fabricated prototype of a compact UWB antenna exhibits an omnidirectional radiation pattern with the low peak measured gain required of 2.55 dBi at 10 GHz and promising radiation efficiency of 90%. The proposed compact planar antenna has technical potential to be utilized in UWB and IoT applications.     

Ultra-wideband CPW-fed antenna with round corner rectangular slot and partial circular patch

Abstract: A novel coplanar waveguide (CPW)-fed ultra-wideband wide slot antenna is proposed. Because of the round corner of the rectangular slot and partial circular patch, the bandwidth of the antenna is enhanced largely. Good agreement between the measurement and simulation has been achieved. The results show that the impedance bandwidth of the antenna reaches up to 4.5-15.5 GHz for S₁₁ < -15 dB and 2.5-18 GHz for S₁₁ < -10 dB. Meanwhile, a good omni-directional radiation performance has also been achieved.     

Small modified monopole antenna for UWB application

In this paper, we present a novel modified printed monopole antenna (PMA) for ultra-wideband (UWB) applications. The proposed antenna consists of a truncated ground plane and radiating patch with two tapered steps, which provides wideband behaviour and relatively good matching. Moreover, the effects of a modified trapezoid-shaped slot inserted in the radiating patch, on the impedance matching and radiation behaviour is investigated. The antenna has a small area of 14 x 20 mm² and offers an impedance bandwidth as high as 100% at a centre frequency of 7.45 GHz for S₁₁ < -10 dB, which has a frequency bandwidth increment of 18% with respect to the previous similar antenna. Simulated and experimental results obtained for this antenna show that it exhibits good radiation behaviour within the UWB frequency range.     

V-Shaped Monopole Antenna with Chichena Itzia Inspired Defected Ground Structure for UWB Applications

Due to rapid growth in wireless communication technology, higher bandwidth requirement for advance telecommunication systems, capable of operating on two or higher bands with higher channel capacities and minimum distortion losses is desired. In this paper, a compact Ultra-Wideband (UWB) V-shaped monopole antenna is presented. UWB response is achieved by modifying the ground plane with Chichen Itzia inspired rectangular staircase shape. The proposed V-shaped is designed by incorporating a rectangle, and an inverted isosceles triangle using FR4 substrate. The size of the antenna is 25 mm×26 mm×1.6 mm. The proposed V-shaped monopole antenna produces bandwidth response of 3 GHz Industrial, Scientific, and Medical (ISM), Worldwide Interoperability for Microwave Access (WiMAX), (IEEE 802.11/HIPERLAN band, 5G sub 6 GHz) which with an additional square cut amplified the bandwidth response up to 8 GHz ranging from 3.1 GHz to 10.6 GHz attaining UWB defined by Federal Communications Commission (FCC) with a maximum gain of 3.83 dB. The antenna is designed in Ansys HFSS. Results for key performance parameters of the antenna are presented. The measured results are in good agreement with the simulated results. Due to flat gain, uniform group delay, omni directional radiation pattern characteristics and well-matched impedance, the proposed antenna is suitable for WiMAX, ISM and heterogeneous wireless systems.     

Wideband multilayered microstrip antennas fed by coplanar waveguide-loop with and without via combinations

Coplanar waveguide (CPW)-loop fed wideband multilayered microstrip antennas with and without via combinations are presented. The antenna consists of two dielectric substrates, CPW-loop on the ground plane layer, main patch on the middle layer and four asymmetric parasitic patches on the upper layer. The feed consists of a CPW, a loop on a ground plane and a via between main patch and feeding strip on the ground plane layer. Using via, the gain flatness over the impedance bandwidth and return loss are improved. The proposed antenna with four feeding structures is also studied. The 10 dB return loss bandwidths of the antenna with and without via are 34% (3.12? 4.41 GHz) and 33.7% (3.18 ?4.47 GHz), respectively. The measured gain is >5.0 dBi over the impedance bandwidth.     

A simple dual-band microstrip-fed printed antenna for WLAN applications

A novel microstrip-fed dual-band printed antenna for wireless local area network (WLAN) is presented. The antenna comprises a rectangular and a circular radiating element, which generate two resonant modes to cover 2.4/5.2/5.8 GHz WLAN bands. The design was experimentally verified by constructing the antenna on a FR4 (ϵr = 4.4) dielectric substrate (47 mm x 26 mm x 0.76 mm) and measuring its impedance and radiation characteristics at both the bands. The measured 10 dB return loss (VSWR 2:1) bandwidth in the 2.4G Hz band is 550 MHz (2.1?2.65 GHz) and it covers the bandwidth required for 2.4 GHz WLAN. The 5.2/5.8 GHz resonant mode has a bandwidth of 950 MHz (5.15?6.1 GHz) covering 5.2/5.8 GHz WLAN bands. A rigorous experimental evaluation confirmed that the dual-band printed antenna maintained good radiation characteristics with minimum cross-polarisation levels.     

Design of a Compact Monopole Antenna for UWB Applications

In this paper, a low cost, highly efficient and low profile monopole antenna for ultra-wideband (UWB) applications is presented. A new inverted triangular-shape structure possessing meander lines is designed to achieve a wideband response and high efficiency. To design the proposed structure, three steps are utilized to achieve an UWB response. The bandwidth of the proposed antenna is improved with changing meander lines parameters, miniaturization of the ground width and optimization of the feeding line. The measured and simulated frequency band ranges from 3.2 to 12 GHz, while the radiation patterns are measured at 4, 5.3, 6 and 8 GHz frequency bands. The overall volume of the proposed antenna is 26 × 25 × 1.6 mm3 ; whereas the FR4 material is used as a substrate with a relative permittivity and loss tangent of 4.3 and 0.025, correspondingly. The peak gain of 4 dB is achieved with a radiation efficiency of 80 to 98% for the entire wideband. Design modelling of proposed antenna is performed in ANSYS HFSS 13 software. A decent consistency between the simulated and measured results is accomplished which shows that the proposed antenna is a potential candidate for the UWB applications.     

Ultra wideband patch antenna with a novel folded-patch technique

The authors present the results of a polygonal patch antenna for ultra-wideband applications covering a frequency band from 4.14 to 13.50 GHz. The fabricated antenna achieved a 210 dB impedance bandwidth in excess of 125% with an antenna size of 0.373λo/sub / x 0.373 xλo/sub /0.149λ/spl o/ at its centre frequency. The antenna?s impedance bandwidth is 64% higher than what is currently obtainable with state-of-the-art folded-patch techniques. The proposed patch antenna has a polygonal-shape with a rectangular slot and shorting pins. The analysis of this antenna shows that bandwidth broadening is achieved by using a rectangular slot on the patch that is fed from a folded-patch feed, whereas the reduction in antenna size is achieved through the use of two shorting pins strategically located on the radiating patch.     

A Compact Rhombus Shaped Antenna with Extended Stubs for Ultra-Wideband Applications

Ultra-wideband (UWB) is highly preferred for short distance communication. As a result of this significance, this project targets the design of a compact UWB antennas. This paper describes a printed UWB rhombus-shaped antenna with a partial ground plane. To achieve wideband response, two stubs and a notch are incorporated at both sides of the rhombus design and ground plane respectively. To excite the antenna, a simple microstrip feed line is employed. The suggested antenna is built on a 1.6 mm thick FR4 substrate. The proposed design is very compact with overall electrical size of 0.18λ × 0.25λ (14 × 18 mm²). The rhombus shaped antenna covers frequency ranging from 3.5 to 11 GHz with 7.5 GHz impedance bandwidth. The proposed design simulated and measured bandwidths are 83.33% and 80%, respectively. Radiation pattern in terms of E-field and H-field are discussed at 4, 5.5 and 10 GHz respectively. The proposed design has 65% radiation efficiency and 1.5 dBi peak gain. The proposed design is simulated in CST (Computer Simulation Technology) simulator and the simulated design is fabricated for the measured results. The simulated and measured findings are in close resemblance. The obtained results confirm the application of the proposed design for the ultra-wide band applications.     

Aperture-coupled asymmetrical c-shaped slot microstrip antenna for circular polarisation

A novel aperture-coupled, asymmetrical C-shaped slot, square microstrip antenna is proposed for circular polarisation (CP). A narrow and asymmetrical C-shaped slot, microstrip antenna is fed at the centre using an aperture coupling to obtain a CP operation. The compactness of the antenna is easily obtained by inserting a C-shaped slot. Wide CP radiation is achieved simply by making the C-shaped slot asymmetrical. With this antenna, the measured 3 dB AR bandwidth is around 3.3% and the 10 dB return loss bandwidth achieved is 16.0%. The overall antenna size is 0.48λo x 0.48λo x 0.092λo at 2.4 GHz. The proposed slot microstrip patch technology is useful to design compact, broadband, circularly polarised antennas and arrays.     

Compact wideband Koch fractal printed slot antenna

A compact wideband printed slot antenna, suitable for wireless local area network (WLAN) and satisfying the worldwide interoperability for microwave access (WiMAX) applications, is proposed here. The antenna is microstrip-fed and its structure is based on Koch fractal geometry where the resonance frequency of a conventional triangular slot antenna is lowered by applying Koch iterations. The antenna size inclusive of the ground plane is compact and has a wide operating bandwidth. The proposed second iteration Koch slot antenna operates from 2.33 to 6.19 GHz covering the 2.4/5.2/5.8 GHz WLAN bands and 2.5/3.5/5.5 GHz WiMAX bands. The antenna exhibits omnidirectional radiation coverage with a gain better than 2.0 dBi in the entire operating band. Design equations for the proposed antenna are developed and their validity is confirmed on different substrates and for different slot sizes.     

一种改善超宽带MIMO天线隔离性能的方法

多输入多输出(Multiple-InputMultiple-Output,MIMO)技术是现代通信技术的发展趋势,为移动通信的迅速更迭提供了极大支持.设计了一种二端口的超宽带MIMO天线,其-10 dB阻抗带宽从3.3 GHz扩展到9.1 GHz.通过在天线接地板上蚀刻一条宽缝隙,并在其中添加音叉型枝节,改善了超宽带M...     

Design and implementation of low sidelobe substrate integrated waveguide longitudinal slot array antennas

Low sidelobe longitudinal slot array antennas are investigated based on substrate integrated waveguide (SIW) technology. The design method consists of the characterisation of the radiating element, the synthesis of the linear array and the development of the planar array including a feeding power divider by performing fullwave electromagnetic simulations for the final accurate design. Two planar slot array antennas are fabricated with a normal printed circuit board (PCB) process. Low sidelobe features are verified by the measured results which are in agreement with the simulated results. For an 8 x 8 SIW slot array antenna, the measured sidelobe levels (SLLs) are below 236 dB in the H-plane and below 225 dB in the E-plane with the Gain of 20.3 dB at 9.9 GHz. And for a 16 x 16 antenna, the SLLs are below 230 dB both in the E-plane and H-plane with the Gain of 24.4 dB at 10 GHz. The achieved design goals on the radiation patterns therefore validate the proposed low sidelobe SIW slot array antennas to be valuable candidates for high performance communication and radar applications.     

Sectorised antenna array and measurement methodology for indoor ultra-wideband applications

A new sectorised antenna array (SAA) and measurement methodology are proposed for indoor ultrawideband (UWB) applications. The proposed SAA comprises of one centre element and six side elements. The one centre element and six side elements are arranged in a semi-spherical antenna array configuration. The measurement system and methodology for the coverage of the SAA are developed. The measured bandwidth of the SAA for voltage standing wave ratio (VSWR) <2 is 37.5%, ranging from 3.06 to 4.47 GHz. The boresight gain is more than 5.2 dBi across the impedance bandwidth. The proposed SAA is able to provide omni-directional pattern with an average gain of 5.2 dBi over the angles (0-3608). The discone reference antenna is used to measure the coverage of the proposed SAA. The proposed measurement study shows that the proposed SAA offers omni-directional coverage desirable in UWB indoor location and short-range communication systems.     

Broadband flexible comb-shaped monopole antenna

A broadband comb-shaped monopole antenna is proposed. The antenna has dimensions of 19 mm x 12 mm. The measured results show good agreement with the numerical prediction, and broadband operation with 10 dB impedance bandwidth of 44.75% (1.7-2.68 GHz). The antenna is built on one side of a flexible-printed circuit board (PCB) dielectric substrate. Folded and rolled antenna structures, which are transformed by the proposed planar antenna structure, are presented. Each antenna has a broadband impedance bandwidth that covers the PCS, UMTS, WiBro, WLAN and SDMB bands. Also, omni-directional radiation patterns over the operating bands have been obtained. The proposed antennas are suitable for mobile communication applications requiring a small antenna.     

基于LTCC宽频带双频差分天线的研究与设计

提出了一种新型宽频带双频差分天线.该天线基于低温共烧陶瓷(Low Temperature Co-Fired Ceramies,简称LTCC)技术,采用矩形环状贴片,并使用两条叉形微带馈线进行差分馈电,是一种具有平衡结构的宽缝隙天线,该结构使得天线拥有很宽的频带宽度.天线两频段的中心频率为2.63 GHz和5.13 GH...     

A Compact Flexible Circularly Polarized Implantable Antenna forBiotelemetry Applications

With the help of in-body antennas, the wireless communication among the implantable medical devices (IMDs) and exterior monitoring equipment, the telemetry system has brought us many benefits. Thus, a very thin-profile circularly polarized (CP) in-body antenna, functioning in ISM band at 2.45 GHz, is proposed. A tapered coplanar waveguide (CPW) method is used to excite the antenna. The radiator contains a pentagonal shape with five horizontal slits inside to obtain a circular polarization behavior. A bendable Roger Duroid RT5880 material (ε_r = 2.2, tanδ = 0.0009) with a typical 0.25 mm-thickness is used as a substrate. The proposed antenna has a total volume of 21 × 13 × 0.25 mm³. The antenna covers up a bandwidth of 2.38 to 2.53 GHz (150 MHz) in vacuum, while in skin tissue it covers 1.56 to 2.72 GHz (1.16 GHz) and in the muscle tissue covers 2.16 to 3.17 GHz (1.01 GHz). GHz). The flexion analysis in the x and y axes was also performed in simulation as the proposed antenna works with a wider bandwidth in the skin and muscle tissue. The simulation and the curved antenna measurements turned out to be in good agreement. The impedance bandwidth of −10 dB and the axis ratio bandwidth of 3 dB (AR) are measured on the skin and imitative gel of the pig at 27.78% and 35.5%, 13.5% and 4.9%, respectively, at a frequency of 2.45 GHz. The simulations revealed that the specific absorption rate (SAR) in the skin is 0.634 and 0.914 W/kg in muscle on 1g-tissue. The recommended SAR values are below the limits set by the federal communications commission (FCC). Finally, the proposed low-profile implantable antenna has achieved very compact size, flexibility, lower SAR values, high gain, higher impedance and axis ratio bandwidths in the skin and muscle tissues of the human body. This antenna is smaller in size and a good applicant for application in medical implants.