丝胶生物吸附剂选择性去除废水中染料的评估(英文)

The silk sericin is the main residue in silk production and it is found to be a low cost and efficient biosorbent.In this study,sericin was characterized with various techniques including SEM(scanning electron microscope),XRD,N2 physisorption,FTIR(Fourier transformed infrared spectroscopy) and XPS(X-ray photoelectron spectroscopy).The nitrogen content of sericin was ca.8.5 mmol·g-1 according to elemental analysis.Dye adsorp-tion by sericin biosorbent was investigated with the acid yellow(AY),methylene blue(MB) and copper(II) phthalocyanine-3,4’4″4’″-tetrasulfonic acid(CuPc) dyes from water.Sericin displayed large capacity for AY and CuPc adsorption with adsorption capacities of respectively 3.1 and 0.35 mmol·g-1,but it did not adsorbed methylene blue dye.This selectivity is due to the basicity of amide groups in sericin biosorbents.     

Rapid Removal of Toxic Remazol Brilliant Blue-R Dye from Aqueous Solutions Using Juglans nigra Shell Biomass Activated Carbon as Potential Adsorbent: Optimization,Isotherm, Kinetic,and Thermodynamic Investigation

Recently, the treatment of effluent by agricultural waste biomass has significantly attracted wide interest among researchers due to its availability, efficacy, and low cost. The removal of toxic Remazol Brilliant Blue-R (RBBR) from aqueous solutions using HNO₃-treated Juglans nigra (walnut) shell biomass carbon as an adsorbent has been examined under various experimental conditions, such as initial pH, adsorbate concentration, adsorbent dosage, particle size, agitation speed, and type of electrolyte. The experiments are designed to achieve the maximum dye removal efficiency using the response surface methodology (RSM). The optimum pH, adsorbent dosage, and particle size were found to be 1.5, 7 g L⁻¹, and 64 μm, respectively for maximum decolorization efficiency (98.24%). The prepared adsorbent was characterized by particle size, Brunauer–Emmett–Teller (BET) surface area, pore volume, zero-point charge (pH_zpc), Fourier transform infrared spectroscopy (FT-IR), field emission scanning electron microscopy/energy dispersive X-ray spectroscopy (FE-SEM/EDX), X-ray diffraction (XRD), and thermogravimetric analysis (TGA). Based on fitting the experimental data with various models, the isotherm and kinetic mechanism are found to be more appropriate with Langmuir isotherm and pseudo-second-order kinetics. The adsorption mechanism can be described by the intra-particle diffusion model, Bangham, and Boyd plots. The overall rate of adsorption is controlled by the external film diffusion of dye molecules. The maximum monolayer adsorption capacity, (q_max) 54.38 mg g⁻¹ for RBBR dye, was obtained at a temperature of 301 K. From a thermodynamic standpoint, the process is endothermic, spontaneous, and the chemisorption process is favored at high temperatures. Desorption studies were conducted with various desorbing reagents in various runs and the maximum desorption efficiency (61.78% in the third run) was obtained using the solvent methanol. Reusability studies demonstrated that the prepared adsorbent was effective for up to three runs of operation. The investigation outcomes concluded that walnut shell biomass activated carbon (WSBAC) is a cost-effective, eco-friendly, and bio-sustainable material that can be used for synthetic dye decolorization in aqueous media.     

Application of Papaya Seeds as a Macro-/Mesoporous Biosorbent for the Removal of Large Pollutant Molecule from Aqueous Solution: Equilibrium,Kinetic, and Mechanism Studies

The potential use of papaya seeds as biosorbent for the removal of a large dye molecule, Procion Red, from aqueous solution was investigated. Papaya seeds were characterized by nitrogen adsorption/desorption isotherms and scanning electron microscopy. The results revealed that the papaya seeds exhibit a macro-/mesoporous structure, which is desirable for applications in adsorption processes. The models of Langmuir, Freundlich, and Temkin were employed to fit the equilibrium data, where the Langmuir model showed the most suitable fitting. The maximum adsorption capacity for Procion red dye was found to be 73.26 mg g^?1. Pseudo-first-order, pseudo-second-order, Elovich, and intraparticle diffusion models were used to analyze the kinetic data obtained at different concentrations of dye. The adsorption process of Procion red dye followed the pseudo-second-order and intraparticle diffusion models. The results indicated that the adsorbent used in this work is adequate for the treatment of large dye molecules containing in aqueous solutions. This work highlights the potential application of papaya seeds in the field of adsorption.     

Removal of Zinc(II) from Aqueous Solutions using an Eco-Friendly Biosorbent Originating from the Winery Industry

The aim of this work was to evaluate the morphological and chemical characteristics of Isabel grape bagasse (Vitis labrusca × Vitis vinifera) through instrumental techniques, including scanning electron microscopy, Fourier Transform infrared spectroscopy, and ¹³C nuclear magnetic resonance, and to describe the adsorption of zinc(II) from aqueous solutions by this biosorbent. In general, the grape bagasse was constituted mainly of particles with heterogeneous shapes and sizes that were also rich in oxygenated functional groups, especially –OH. With respect to the equilibrium of the adsorption process, the Freundlich isotherm provided the better fit for the experimental data. The rate-controlling step, on the other hand, was better described using a pseudo-second-order kinetic model, and the removal percentage (? 50%) was similar for all tested concentrations. Finally, the thermodynamic data showed that the adsorption occurred via an exothermic process accompanied by a decrease in the randomness at the solid/solution interface.     

氢氧化镁改性硅藻土对水中活性红的吸附性能研究

对氢氧化镁改性硅藻土吸附去除活性红染料的行为进行了研究,探讨了pH值、吸附剂用量、NaCl浓度等因素对吸附脱色率的影响.结果显示当改性硅藻土投加量为6 g/L,溶液pH值为6,NaCl浓度为4 mol/L,该吸附剂对活性红溶液的脱色率可达95％.实验结果也表明氢氧化镁改性硅藻土对活性红的吸附符合Langmuir等温模型和准二级动力学模型,最大吸附量为64.94 mg/g.热力学研究表明氢氧化镁改性硅藻土对活性红的吸附是一自发、放热过程.     

Fe-Al柱撑膨润土吸附染料酸性大红的性能

制备了Fe-Al柱撑膨润土,研究了其对染料酸性大红的吸附去除性能,结果表明:Fe-Al柱撑膨润土对染料酸性大红有很好的去除效果,当其用量为0.1g时,染料酸性大红的吸附去除率达到92.6%;Fe-Al柱撑膨润土对染料酸性大红的吸附在60分钟达到平衡;pH值对染料酸性大红的去除有一定的影响,在酸性和碱性条件下的去除率大于中性。平衡吸附量qe与平衡质量浓度pe之间的关系符合Freundlich和Langmuir等温吸附方程所描述的规律。     

Anion Exchange Resins as Effective Sorbents for Acidic Dye Removal from Aqueous Solutions and Wastewaters

Purification of wastewaters, particularly those containing dyes, has become increasingly important. The aim is to avoid a potential threat to the environment. Various sorbents have been used in the treatment of wastewaters contaminated by the Acid Orange 7 dye (AO7). In this article, the three anion exchange resins–weakly basic (Lewatit MonoPlus MP 62), intermediate (Lewatit MonoPlus MP 64), and strongly basic (Lewatit MonoPlus MP 500) were applied for AO7 removal from the aqueous solutions and wastewater. The most effective anion exchanger in wastewater purification proved to be Lewatit MonoPlus MP 500. AO7 sorption was not affected by the presence of Na₂SO₄ and CH₃COOH even at relatively high concentrations. The dye retentions were almost unchanged in the presence of non-ionic and anionic surfactants. AO7 sorption by Lewatit MonoPlus MP 62, MP 64, and MP 500 sharply decrease when the cationic surfactant is present in the solution. The monolayer adsorption capacity (Q₀ ) for MP 62 was found to be 79.9 mg/g at 25°C. At 45°C this value was almost ten times higher (769.5 mg/g). The increase of Q₀ values from 568.5 to 896.8 mg/g for MP 64 and from 979.0 to 1004.4 mg/g for MP 500 was observed with the rise in temperature. The optimal desorption conditions were found as follows: 1 M KSCN in 80–90% methanol for MP 62 (95–100% desorption) and MP 64 (～88% desorption) as well as 1 M HCl in 90% methanol for MP 500 (87% desorption).     

Application of Nano Surfactant Modified Biosorbent as an Efficient Adsorbent for Dye Removal

In the current study, sorption of methylene blue dye (MB) from aqueous solutions, using sawdust modified with sodium dodecyl sulfate (SDS/SD) has been investigated. Sorption experiments were performed using batch and fixed-bed column systems. The effects of important parameters, such as pH, initial dye concentration, flow rate, and bed depth on the sorption of MB dye have been studied. Thomas and the bed-depth service time model (BDST) were applied for analysis of sorption data and estimating of sorption capacity. In order to drive adsorption isotherms, sorption experiments were conducted in batch mode and the treatment of the obtained data were carried out using the Langmuir and Freundlich equations. Based on the breakthrough analysis obtained from continuous sorption experiments, the highest column capacity of 129.68 mg g^?1 was obtained for the SDS/SD adsorbent. The results of this study indicated that surfactant-modified sawdust is much more effective for basic MB dye removal compared to untreated sawdust (SD) and the exhausted SDS/SD column can be easily regenerated using dilute HCl solution with high performance (>95%). The results of this study also indicated the successful applicability of the introduced adsorbent as a very efficient and cost effective adsorbent for the removal of cationic dye molecules from aqueous wastes.     

Biosorption of a Basic Dye from Aqueous Solutions by Euphorbia rigida

Abstract

In this study, the biosorption of Basic Blue 9 (BB9) dye from aqueous solutions onto a biomass of Euphorbia rigida was examined by means of the initial biosorbate concentration, biosorbent amount, particle size, and pH. Biosorption of BB9 onto E. rigida increases with both the initial biosorbate concentration and biosorbent amount, whereas decreases with the increasing particle size. The experimental data indicated that the biosorption isotherms are well‐described by the Langmuir equilibrium isotherm equation at 20, 30, and 40°C. Maximum biosorption capacity was 3.28×10^?4 mol g^?1 at 40°C. The biosorption kinetics of BB9 obeys the pseudo‐second‐order kinetic model. The thermodynamic parameters such as ΔG°, ΔH° and ΔS° were calculated to estimate the nature of biosorption. These experimental results have indicated that E. rigida has the potential to act as a biosorbent for the removal of Basic Blue 9 from aqueous solutions.     

Isotherm,Kinetic, and Thermodynamic of Cationic Dye Removal from Binary System by Feldspar

In this paper, the isotherm, kinetic, and thermodynamic of cationic dye removal onto inorganic adsorbent (Feldspar) were investigated in single and binary systems. Basic Red 18 (BR18) and Basic Blue 41 (BB41) were used as cationic dyes. The characterization of the Feldspar was carried out using X-ray fluorescence (XRF), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and scanning electron microscopy (SEM) techniques. The effect of operational parameters such as adsorbent dosage, initial dye concentration, pH, ionic strength, and temperature on dye removal was studied. It was found that the adsorption of BR18 and BB41 onto Feldspar followed with Langmuir and extended Langmuir isotherms in single and binary systems, respectively. Adsorption kinetic of dyes was found to conform to pseudo-second order kinetic in single and binary system. The thermodynamic data showed that dye adsorption onto Feldspar was spontaneous, endothermic, and physisorption reaction. Based on the data of the present investigation, one could conclude that the Feldspar as an eco-friendly and low-cost adsorbent might be a suitable alternative to remove dyes from colored aqueous solutions containing cationic dyes.     

Application of Aqai Stalks as Biosorbents for the Removal of the Dye Procion Blue MX-R from Aqueous Solution

The aqai palm stalk (Euterpe oleracea) is a food residue used in its natural form (AS) and also protonated (AAS) as biosorbents for the removal of the textile dye Procion Blue MX-R from aqueous solutions. This biosorbent was characterized by infrared spectroscopy, scanning electron microscopy, and nitrogen adsorption-desorption curves. The effects of pH, biosorbent dosages, and shaking time on the biosorption capacities were studied. In the acidic pH region (pH 2.0) the biosorption of the dye was favorable. The minimum contact time to obtain the equilibrium was 8 hours for AS and AAS biosorbents. The general order kinetic model provided the best fit to the experimental data compared with the pseudo-first order and pseudo-second order kinetic adsorption models. The equilibrium data were fitted to the Langmuir, Freundlich, and Sips isotherm models. For both dyes the equilibrium data were best fitted to the Sips isotherm model. The enthalpy and entropy of adsorption of PB were obtained from adsorption equilibrium experiments ranging from 298 to 323 K. Simulated dyehouse effluent was used to check the applicability of the proposed adsorbents for effluent treatment.     

Removal of Acid Dyes from Aqueous Solutions using Chemically Activated Carbon

Abstract

Textile dyes (Acid Yellow 17 and Acid Orange 7) were removed from its aqueous solution in batch and continuous packed bed adsorption systems by using thermally activated Euphorbia macroclada carbon with respect to contact time, initial dye concentration, and temperature. The activated carbon was prepared using a cheap plant-based material called Euphorbia macroclada, which was chemically modified with K₂CO₃. Lagergren-first-order and second-order kinetic models were used to fit the experimental data. Equilibrium isotherms were analyzed by Langmuir and Freundlich isotherms. Equilibrium data fitted well the Langmuir model in the studied temperature (25–55°C) ranges. The maximum adsorption capacity of AY17 and AO7 onto activated carbon was found to be 161.29 and 455 mgg^?1, respectively by Langmuir isotherm at 55°C. Breakthrough curves for column adsorption have also been studied. The desorption of dyes has been experimentally investigated using NaOH solution of pH 11.     

Removal of Selected Basic Dyes using Activated Carbon from Tannery Wastes

Activated carbon prepared from tannery leather waste (TLW-AC) has been studied for its efficiency of removal of basic dyes, namely rhodamine B (RB), methylene blue (MB), and malachite green (MG) from aqueous solutions. Factors influencing dye adsorption such as the concentration of dye, pH, contact time, and temperature were investigated. The adsorption was found to be strongly dependent on the pH and temperature. The maximum sorption capacity of RB was obtained at pH 3 and for MB and MG was obtained at pH 11. Various thermodynamic parameters such as ΔG°, ΔH°, and ΔS° were calculated. The kinetic studies reveal that the adsorption process follows the pseudo second-order kinetic model. The equilibrium data have been well-described by the Langmuir and Freundlich models, and the data fitted well in both model equations. The study revealed that wastes from leather industry is an economically viable option for dye removal.     

Affinity of Clinoptilolite‐based Zeolites towards Removal of Cd from Aqueous Solutions

Abstract

Cd removal from aqueous solutions using as‐received and pretreated forms of two different clinoptilolite samples (denoted GC and BC) was investigated and dissimilar sorption affinities were revealed. Equilibrium behavior of systems were modeled using six different adsorption isotherms. The maximum sorption capacities, as obtained from the solubility‐normalized Dubinin‐Astakhov model for as‐received samples, were determined as 0.18 meq/g and 0.12 meq/g for GC and BC, whereas 0.72 meq/g and 0.41 meq Cd/g was determined for their pretreated forms, respectively. Examination of the release of exchangeable cations into the solution at equilibrium and the change of pH were discussed in terms of varying prevalence of ion exchange, dissolution of the sorbent and adsorption.     

Removal of Crystal Violet Dye from Aqueous Solution Using Calcined and Uncalcined Mixed Clay Adsorbents

In this work, calcined and uncalcined mixed clays containing kaolin, ball clay, feldspar, pyrophyllite, and quartz are examined as a potential adsorbent for the removal of crystal violet dye from aqueous solution. These clays are characterized by nitrogen adsorption/desorption isotherms, X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy, and thermo gravimetric analysis (TGA). The kinetics and thermodynamic parameters as well as the effects of the pH, the temperature, and the adsorbent dosage have also been investigated. The experimental results indicate that the Langmuir model expresses the adsorption isotherm better than the Freundlich model. The obtained result showed a tremendous increase in the crystal violet adsorption capacity (1.9 × 10^?3 mol g^?1) after calcination, which is one order greater than that of the uncalcined mixed clay. The mechanism of the adsorption process is elucidated on the basis of experimental data. The percentage removal of crystal violet dye increases with increasing the pH, the temperature, and the adsorbent dosage. The investigation of kinetic studies indicates that the adsorption of crystal violet on calcined and uncalcined mixed clays could be described by the pseudo-second-order model. The negative Δ G ⁰ values obtained from the thermodynamic investigation confirm that the adsorption is spontaneous in nature. The adsorption results suggest that the calcined and uncalcined mixed clays can also be used as low cost alternatives to the expensive activated carbon for the removal of dyes from aqueous solution.     

油页岩灰渣合成Na-A沸石用于去除水溶液中Cu2+（英文）

Na-A zeolite was synthesized using oil shale ash （OSA）, which is a solid by-product of oil shale proc- essing. The samples were characterized by various techniques, such as scanning electron microscopy, X-ray diffrac- tion and Brunaner Emmet Teller method. The batch isothermal equilibrium adsorption experiments were performed to evaluate the ability of Na-A zeolite for removal of Cu （II） from aqueous solutions. The effects of operating pa- rameters, such as concentration of copper solutions, adsorbent dosages, pH value of solutions and temperature, on the adsorption efficiency were investigated. The equilibrium adsorption data were fitted with Langmuir and Freundlich models. The maximum adsorption capacity of Na-A zeolite obtained from the Langmuir adsorption iso- therm is 156.7 mg.g-t of Cu （lI）. The increase of pH level in the adsorption process suggests that the uptake of heavy metals on the zeolite follows an ion exchange mechanism. The batch kinetic data fit the pseudo-second order equation well. The thermodynamic parameters, such as changes in Gibbs free energy （AG）, enthalpy （AH） and en- tropy （AS）, are used to predict the nature of the adsorption process. The negative AG values at different tempera- tures confirm that the adsorption processes are spontaneous.     

Comparison of Basic Dye Crystal Violet Removal from Aqueous Solution by Low-Cost Biosorbents

Abstract

The removal of basic dye crystal violet by low-cost biosorbents was investigated in this study using a batch experimental system. The adsorption of crystal violet onto various adsorbents was solution pH-dependent and the maximum removal occurred at basic pH 10.0. The kinetic experimental data were analyzed using pseudo-first-order and pseudo-second-order equations to examine the adsorption mechanism and the intraparticle diffusion model to identify the potential rate controlling step. These results suggested that the adsorption of crystal violet onto various adsorbents was best represented by the pseudo-second-order equation. The suitability of the Langmuir and Freundich adsorption isotherms to the equilibrium data was also investigated at various temperatures for all four sorbents and the adsorption isotherms exhibited Freundlich behavior. The Freundlich constant K_f was 1.55 for alligator weed, 2.33 for Laminaria japonica, 9.59 for rice bran and 5.38 (mg/g)/(mg/L)^1/n for wheat bran, respectively at adsorbent concentration 5 g/L, pH 10.0 and 20°C. The thermodynamic parameters (ΔH, ΔG, and ΔS) were calculated and the results showed that the adsorption process for various adsorbents was spontaneous, endothermic, with an increased randomness, respectively. The particle size and the reaction temperature exhibited an insignificant impact on the adsorption equilibrium of crystal violet. The adsorbents investigated could serve as low-cost adsorbents for removing the crystal violet from aqueous solution.     

Equilibrium,Thermodynamic, and Kinetic Studies on Trichoderma viride Biomass as Biosorbent for the Removal of Cu(II) from Water

Equilibrium, thermodynamic, and kinetic studies on the biosorption of Cu(II) using biomass, Trichoderma viride were carried out. The biosorbent was characterized by Fourier transform infrared spectroscopy and Scanning Electron Microscopy. The Langmuir and Freundlich isotherm models were applied to describe the biosorption process. The influence of pH, the biomass dosage, the contact time, the initial metal ion concentration, and the temperature of the solution on the biosorption was studied. The maximum Cu(II) biosorption was attained at pH 5. The equilibrium data were better fit by the Langmuir isotherm model than by the Freundlich isotherm. The maximum biosorption capacity of T. viride biomass was found to be 19.6 mg/g for Cu(II). The kinetic studies indicated that the biosorption of Cu(II) followed the pseudo-second-order model. The calculated thermodynamic parameters, Gibbs-free energy (ΔG^o), enthalpy (ΔH^o), and entropy (ΔS^o) showed that the biosorption of Cu(II) onto T. viride biomass was spontaneous and endothermic. It can be concluded that the T. viride biomass has the potential as an effective and low-cost biosorbent for Cu(II) removal from aqueous solutions.