共查询到20条相似文献,搜索用时 15 毫秒
1.
Shin‐Li Lu 《Quality and Reliability Engineering International》2017,33(8):2397-2408
The cumulative sum (CUSUM) and exponentially weighted moving average (EWMA) charts are popular statistical tools to improve the performance of the Shewhart chart in detecting small process shifts. In this study, we propose the mixed generally weighted moving average (GWMA)‐CUSUM chart and its reverse‐order CUSUM‐GWMA chart to enhance detection ability compared with existing counterparts. The simulation revealed that the mixed GWMA‐CUSUM and mixed CUSUM‐GWMA charts have the sensitivity to detect small process shifts and efficient structures compared with the mixed EWMA‐CUSUM and mixed CUSUM‐EWMA charts, respectively. Moreover, the mixed GWMA‐CUSUM chart with a large design parameter has robust performance, regardless of the high tail t distribution or right skewness gamma distribution. 相似文献
2.
Vasileios Alevizakos Kashinath Chatterjee Christos Koukouvinos 《Quality and Reliability Engineering International》2021,37(5):2134-2155
Control charts are widely applied in many manufacturing processes to monitor the quality characteristic of interest. Recently, a homogeneously weighted moving average (HWMA) control chart was proposed as an improvement of the exponentially weighted moving average (EWMA) chart for efficiently monitoring of small shifts in the process mean. In the present article, we extend the HWMA chart by imitating exactly the double EWMA (DEWMA) technique. The proposed scheme is regarded as double HWMA (DHWMA) control chart. The run-length characteristics of the proposed chart are evaluated by performing Monte Carlo simulations. A comparison study versus the EWMA, DEWMA, HWMA, mixed EWMA cumulative sum (CUSUM), CUSUM, and GWMA charts indicates that the DHWMA chart is more effective in detecting small to moderate shifts, while it performs similarly with its competitors for large shifts. We also study the robustness of the proposed chart under several nonnormal distributions, and it is shown that the DHWMA chart is in-control robust for small values of the smoothing parameters. Finally, two examples are given to demonstrate the implementation of the proposed chart. 相似文献
3.
Memory based control charts are developed as alternatives to the Shewhart charts for the detection of small sustaining process shifts. Among the widely used memory control charts are the EWMA (Exponentially Weighted Moving Average), CUSUM (Cumulative Sum), and moving average schemes. Relative to the CUSUM chart, the EWMA and moving average charts are quite basic. The EWMA chart uses a weighted average as the chart statistic while the time-weighted moving average chart is based on unweighted moving average. The moving average statistic of width w is simply the average of the w most recent observations. In this article, the use of one moving average control chart to monitor both process mean and variability. This new moving average chart is efficient in detecting both increases and decreases in mean and/or variability. 相似文献
4.
The performance of EWMA median and CUSUM median control charts for a normal process with measurement errors
下载免费PDF全文
![点击此处可从《Quality and Reliability Engineering International》网站下载免费的PDF全文](/ch/ext_images/free.gif)
Measurement error is often occurred in statistical process control. The effect of a linearly covariate error model on the exponentially weighted moving average (EWMA) median and cumulative sum (CUSUM) median charts is investigated. The results indicate that the EWMA median and CUSUM median charts are significantly affected in the presence of measurement errors. We compared the performance of the EWMA median and CUSUM median charts by using Markov chain method in the average run length and the standard deviation of the run length. We concluded that the CUSUM median chart for small shifts and the EWMA median chart for larger shifts are recommended. Two examples are provided to illustrate the application of the EWMA and CUSUM median charts with measurement errors. 相似文献
5.
Abdul Haq Umme Kalsoom Michael B. C. Khoo 《Quality and Reliability Engineering International》2023,39(3):871-904
The EWMA chart is effective in detecting small shifts in the process mean or process variance. Numerous EWMA charts for the process variance have been suggested in the literature. In this article, new one-sided and two-sided EWMA charts are developed for monitoring the variance of a normal process. In developing these new EWMA charts, first, new unbiased estimators of the process variance are developed, followed by incorporating the developed estimators into the new EWMA charts' statistics. The Monte Carlo simulation method is adopted to evaluate the zero-state and steady-state run-length performances of the proposed EWMA variance charts, in comparison with that of three existing EWMA variance charts and the weighted adaptive CUSUM variance chart. The findings reveal that the proposed charts generally perform better than the existing charts. An example of application is given to show the implementation of the proposed and existing charts in detecting increases or decreases in the process variance. 相似文献
6.
Abdul Haq Rabia Gulzar Michael B. C. Khoo 《Quality and Reliability Engineering International》2018,34(4):563-571
In recent years, the memory‐type control charts—exponentially weighted moving average (EWMA) and cumulative sum (CUSUM)—along with the adaptive and dual control‐charting structures have received considerable attention because of their excellent ability in providing an overall good detection over a range of mean‐shift sizes. These adaptive memory‐type control charts include the adaptive exponentially weighted moving average (AEWMA), dual CUSUM, and adaptive CUSUM charts. In this paper, we propose a new AEWMA chart for efficiently monitoring the process mean. The idea is to first design an unbiased estimator of the mean shift using the EWMA statistic and then adaptively update the smoothing constant of the EWMA chart. The run length profiles of the proposed AEWMA chart are computed using extensive Monte Carlo simulations. Based on a comprehensive comparative study, it turns out that the proposed AEWMA chart performs better than the existing AEWMA, adaptive CUSUM, dual CUSUM, and Shewhart‐CUSUM charts, in terms of offering more balanced protection against mean shifts of different sizes. An example is also used to explain the working of the existing and proposed control charts. 相似文献
7.
The cumulative sum (CUSUM) and exponentially weighted moving average (EWMA) control charts have been widely accepted because of their fantastic speed in identifying small‐to‐moderate unusual variations in the process parameter(s). Recently, a new CUSUM chart has been proposed that uses the EWMA statistic, called the CS‐EWMA chart, for monitoring the process variability. On similar lines, in order to further improve the detection ability of the CS‐EWMA chart, we propose a CUSUM chart using the generally weighted moving average (GWMA) statistic, named the GWMA‐CUSUM chart, for monitoring the process dispersion. Monte Carlo simulations are used to compute the run length profiles of the GWMA‐CUSUM chart. On the basis of the run length comparisons, it turns out that the GWMA‐CUSUM chart outperforms the CUSUM and CS‐EWMA charts when identifying small variations in the process variability. A simulated dataset is also used to explain the working and implementation of the CS‐EWMA and GWMA‐CUSUM charts. 相似文献
8.
New Synthetic CUSUM and Synthetic EWMA Control Charts for Monitoring the Process Mean using Auxiliary Information
下载免费PDF全文
![点击此处可从《Quality and Reliability Engineering International》网站下载免费的PDF全文](/ch/ext_images/free.gif)
Abdul Haq 《Quality and Reliability Engineering International》2017,33(7):1549-1565
The cumulative sum (CUSUM) and exponentially weighted moving average (EWMA) control charts are potentially powerful process monitoring tool because of their excellent speed in detecting small to moderate shifts in the process parameters. These control charts can be further improved by integrating them with the conforming run length control chart, resulting in the synthetic CUSUM (SynCUSUM) and synthetic EWMA (SynEWMA) charts. In this paper, we enhance the detection abilities of the SynCUSUM and SynEWMA charts using the auxiliary information. With suitable assumptions, the proposed control charts encompass the existing SynCUSUM, SynEWMA, CUSUM, and EWMA charts. Extensive Monte Carlo simulations are used to study the run length profiles of the proposed control charts. It turns out that the proposed near‐optimal control charts with the auxiliary information perform uniformly and substantially better than the existing near‐optimal SynCUSUM, SynEWMA, CUSUM, and EWMA charts. The proposed and existing control charts are also illustrated with the help of an example. Copyright © 2017 John Wiley & Sons, Ltd. 相似文献
9.
Nasir Abbas Muhammad Riaz Ronald J. M. M. Does 《Quality and Reliability Engineering International》2013,29(3):345-356
The control chart is a very popular tool of statistical process control. It is used to determine the existence of special cause variation to remove it so that the process may be brought in statistical control. Shewhart‐type control charts are sensitive for large disturbances in the process, whereas cumulative sum (CUSUM)–type and exponentially weighted moving average (EWMA)–type control charts are intended to spot small and moderate disturbances. In this article, we proposed a mixed EWMA–CUSUM control chart for detecting a shift in the process mean and evaluated its average run lengths. Comparisons of the proposed control chart were made with some representative control charts including the classical CUSUM, classical EWMA, fast initial response CUSUM, fast initial response EWMA, adaptive CUSUM with EWMA‐based shift estimator, weighted CUSUM and runs rules–based CUSUM and EWMA. The comparisons revealed that mixing the two charts makes the proposed scheme even more sensitive to the small shifts in the process mean than the other schemes designed for detecting small shifts. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献
10.
Mixed Cumulative Sum–Exponentially Weighted Moving Average Control Charts: An Efficient Way of Monitoring Process Location
下载免费PDF全文
![点击此处可从《Quality and Reliability Engineering International》网站下载免费的PDF全文](/ch/ext_images/free.gif)
Babar Zaman Muhammad Riaz Nasir Abbas Ronald J.M.M. Does 《Quality and Reliability Engineering International》2015,31(8):1407-1421
Shewhart, exponentially weighted moving average (EWMA), and cumulative sum (CUSUM) charts are famous statistical tools, to handle special causes and to bring the process back in statistical control. Shewhart charts are useful to detect large shifts, whereas EWMA and CUSUM are more sensitive for small to moderate shifts. In this study, we propose a new control chart, named mixed CUSUM‐EWMA chart, which is used to monitor the location of a process. The performance of the proposed mixed CUSUM‐EWMA control chart is measured through the average run length, extra quadratic loss, relative average run length, and a performance comparison index study. Comparisons are made with some existing charts from the literature. An example with real data is also given for practical considerations. Copyright © 2014 John Wiley & Sons, Ltd. 相似文献
11.
Recent research has shown that adaptive control charts and the CUmulative SUM (CUSUM) schemes are quicker in detecting process shifts than traditional static Shewhart charts. This article proposes a weighted loss function CUSUM (WLC) scheme with Variable Sampling Intervals (VSI). It simultaneously monitors both mean shifts and an increasing variance shift by manipulating a single CUSUM chart. Most importantly, this VSI WLC scheme is much easier to operate and design than a VSI CCC scheme which comprises of three CUSUM charts (two of them monitoring the increasing and decreasing mean shifts and one monitoring the increasing variance shift). In terms of detection efficiency, the VSI WLC scheme is a much more powerful tool than the static X&S chart, the VSI X&S chart and the static WLC scheme. It is even more powerful than the VSI CCC scheme for many different combinations of mean and increasing variance shifts. 相似文献
12.
Zameer Abbas Hafiz Zafar Nazir Noureen Akhtar Muhammad Riaz Muhammad Abid 《Quality and Reliability Engineering International》2020,36(7):2569-2591
The exponentially weighted moving average (EWMA) control chart is a memory chart that is widely used in process monitoring to spot small and persistent disturbances in the process parameter(s). This chart requires normality of the quality characteristic(s) of interest and a smaller choice of smoothing parameter. Any deviations from these conditions affect its performance in terms of efficiency and robustness. For the said two concerns, this study develops a new mixed EWMA chart under progressive setup (mixed EWMA–progressive mean [MEP] chart). The proposed MEP chart combines the advantages of robustness (under nonnormal scenarios) and high sensitivity to small and persistent shifts in the process mean. The performance of the proposed MEP control chart is evaluated in terms of average run length and some other characteristics of run length distribution. The assessment of the proposed chart is made under standard normal, student's t, gamma, Laplace, logistic, exponential, contaminated normal and lognormal distributions. The performance of the proposed MEP chart is also compared with some existing competitors including the classical EWMA, the classical cumulative sum (CUSUM), the homogenously weighted moving average, the mixed EWMA–CUSUM, the mixed CUSUM–EWMA and the double EWMA charts. The analysis reveals that the proposal of this study offers a superior design structure relative to its competing counterparts. An application from substrates manufacturing process (in which flow width of the resist is the key quality characteristic) is also provided in the study. 相似文献
13.
Zameer Abbas Hafiz Zafar Nazir Noureen Akhtar Muhammad Riaz Muhammad Abid 《Quality and Reliability Engineering International》2019,35(4):1046-1060
To maintain and improve the quality of the processes, control charts play an important role for reduction of variation. To detect large shifts in the process parameters, Shewhart control charts are commonly applied but for small shifts, exponentially weighted moving averages (EWMA), cumulative sum (CUSUM), double exponentially weighted moving average (DEWMA), double CUSUM, moving average (MA), double moving average (DMA), and progressive mean (PM) control charts, are used. This study proposes double progressive mean (DPM) and optimal DPM control charts to enhance the performance of the PM chart. As the proposed DPM control charts use information sequentially, hence their performance is compared with natural competitors EWMA, CUSUM, DEWMA, double CUSUM, MA, DMA, and PM control charts. Run length and its different properties are evaluated to compare the performance of the proposed charts and counterparts. Results reveal that proposed optimal DPM outperforms the other charts. An example related to voltage on fixed capacitance level is also provided to illustrate the proposed charts. 相似文献
14.
Syed Masroor Anwar Muhammad Aslam Muhammad Riaz Babar Zaman 《Quality and Reliability Engineering International》2020,36(6):1949-1968
Control charts are popular monitoring tools in statistical process control toolkit. These are used to identify assignable causes in the process parameters (location and/or dispersion). These assignable causes result in a shift in the process parameter(s). The shift can be categorized into three sizes (small, moderate, and large). Memory control charts such as the exponentially weighted moving average (EWMA) and cumulative sum (CUSUM) charts are effective for identifying small-to-moderate shift(s) in the process. Likewise, mixed memory control charts are useful for efficient process monitoring. In this study, we have proposed two new mixed memory control charts based on auxiliary information named MxMEC and MxMCE control charts to improve the efficiency of these mixed charts. The MxMEC chart is a merger of the auxiliary information based MxEWMA chart and the classical CUSUM chart. Likewise, the MxMCE chart integrates the auxiliary information based MxCUSUM with the classical EWMA chart. The proposed MxMEC and MxMCE charts are evaluated through famous performance measures including average run length, extra quadratic loss, relative average run length, and performance comparison index. The performance of the study proposals is compared with the existing counterparts such as the classical CUSUM and EWMA, MxCUSUM, MxEWMA, MEC, MCE, and runs rules-based CUSUM charts. The comparisons revealed the superiority of the proposed charts against other competing charts particularly for small-to-moderate shifts in the process location. Finally, a real-life data is used to show the implementation procedure of the proposed charts in practical situations. 相似文献
15.
An Efficient Shewhart‐Type Control Chart to Monitor Moderate Size Shifts in the Process Mean in Phase II
下载免费PDF全文
![点击此处可从《Quality and Reliability Engineering International》网站下载免费的PDF全文](/ch/ext_images/free.gif)
Javid Shabbir Wajid Hussain Awan 《Quality and Reliability Engineering International》2016,32(5):1597-1619
According to Shewhart, control charts are not very sensitive to small and moderate size process shifts that is why those are less likely to be effective in Phase II. So to monitor small or moderate size process shifts in Phase II, cumulative sum (CUSUM) and exponentially weighted moving average (EWMA) control charts are considered as alternate of Shewhart control charts. In this paper, a Shewhart‐type control chart is proposed by using difference‐in‐difference estimator in order to detect moderate size shifts in process mean in Phase II. The performance of the proposed control chart is studied for known and unknown cases separately through a detailed simulation study. For the unknown case, instead of using reference samples of small sizes, large size reference sample(s) is used as we can see in some of nonparametric control chart articles. In an illustrative example, the proposed control charts are constructed for both known and unknown cases along with Shewhart ‐chart, classical EWMA, and CUSUM control charts. In this application, the proposed chart is found comprehensively better than not only Shewhart ‐chart but also EWMA and CUSUM control charts. By comparing average run length, the proposed control chart is found always better than Shewhart ‐chart and in general better than classical EWMA and CUSUM control charts when we have relatively higher values of correlation coefficients and detection of the moderate shifts in the process mean is concerned. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
16.
Abdul Haq Jennifer Brown Elena Moltchanova 《Quality and Reliability Engineering International》2014,30(8):1165-1177
A control chart is a powerful statistical process monitoring tool that is frequently used in many industrial and service organizations to monitor in‐control and out‐of‐control performances of the manufacturing processes. Cumulative sum (CUSUM) and exponentially weighted moving average (EWMA) control charts have been recognized as potentially powerful tool in quality and management control. These control charts are sensitive to both small and moderate changes in the process. In this paper, we propose a new CUSUM (NCUSUM) quality control scheme for efficiently monitoring the process mean. It is shown that the classical CUSUM control chart is a special case of the proposed controlling scheme. The NCUSUM control chart is compared with some of the recently proposed control charts by using characteristics of the distribution of run length, i.e. average run length, median run length and standard deviation of run length. It is worth mentioning that the NCUSUM control chart detects the random shifts in the process mean substantially quicker than the classical CUSUM, fast initial response‐based CUSUM, adaptive CUSUM with EWMA‐based shift, adaptive EWMA and Shewhart–CUSUM control charts. An illustrative example is given to exemplify the implementation of the proposed quality control scheme. Copyright © 2013 John Wiley & Sons, Ltd. 相似文献
17.
Mu'azu Ramat Abujiya Muhammad Hisyam Lee Muhammad Riaz 《Quality and Reliability Engineering International》2014,30(4):571-590
A control chart is a graphical tool used for monitoring a production process and quality improvement. One such charting procedure is the Shewhart‐type control chart, which is sensitive mainly to the large shifts. For small shifts, the cumulative sum (CUSUM) control charts and exponentially weighted moving average (EWMA) control charts were proposed. To further enhance the ability of the EWMA control chart to quickly detect wide range process changes, we have developed an EWMA control chart using the median ranked set sampling (RSS), median double RSS and the double median RSS. The findings show that the proposed median‐ranked sampling procedures substantially increase the sensitivities of EWMA control charts. The newly developed control charts dominate most of their existing counterparts, in terms of the run‐length properties, the Average Extra Quadratic Loss and the Performance Comparison Index. These include the classical EWMA, fast initial response EWMA, double and triple EWMA, runs‐rules EWMA, the max EWMA with mean‐squared deviation, the mixed EWMA‐CUSUM, the hybrid EWMA and the combined Shewhart–EWMA based on ranks. An application of the proposed schemes on real data sets is also given to illustrate the implementation and procedural details of the proposed methodology. Copyright © 2013 John Wiley & Sons, Ltd. 相似文献
18.
Berihun Bizuneh Fu‐Kwun Wang 《Quality and Reliability Engineering International》2019,35(6):1698-1715
In this paper, we present a new chart called a likelihood ratio based double exponentially weighted moving average (LR_DEWMA) chart to monitor the shape parameter of the inflated Pareto process. Three other control charts such as the Shewhart type, the classical cumulative sum (CUSUM), and the likelihood ratio based EWMA (LR_EWMA) charts are also investigated. The performance of the control charts is evaluated by the average run length (ARL) and standard deviation of run lengths (SDRL) computed through the Monte Carlo simulation approach. Moreover, the median run length (MRL) and some other run length (RL) percentiles are also considered in some cases. Different charts have shown the best performance in different cases. In detecting smaller shifts, while the LR_DEWMA chart outperformed the other charts in terms of ARL and MRL, the CUSUM chart has shown the best performance in terms of SDRL and IQR of RLs. The application of the proposed control charts is illustrated using a chromatography analyses data from the food industry. 相似文献
19.
Kashinath Chatterjee Christos Koukouvinos Angeliki Lappa 《Quality and Reliability Engineering International》2021,37(6):2423-2457
Control charts are widely known quality tools used to detect and control industrial process deviations in statistical process control. In the current paper, we propose a new single memory-type control chart, called the sum of squares triple exponentially weighted moving average control chart (referred as SS-TEWMA chart), that simultaneously detects shifts in the process mean and/or process dispersion. The run length performance of the proposed SS-TEWMA control chart is compared with that of the sum of squares EWMA, sum of squares double EWMA, sum of squares generally weighted moving average, and sum of squares double generally weighted moving average, control charts, through Monte Carlo simulations. The comparisons indicate that the proposed chart is more efficient, than the competing ones, in detecting small shifts in the process mean and/or variability for most of the considered scenarios, while it has comparable performance for some others in identifying large shifts in the process mean and small to large shifts in the process variability. Finally, two illustrative examples are provided to explain the application of the SS-TEWMA control chart. 相似文献
20.
Abdul Haq 《Quality and Reliability Engineering International》2013,29(7):1015-1025
Cumulative sum (CUSUM) and exponentially weighted moving average (EWMA) control charts are commonly used for monitoring the process mean. In this paper, a new hybrid EWMA (HEWMA) control chart is proposed by mixing two EWMA control charts. An interesting feature of the proposed control chart is that the traditional Shewhart and EWMA control charts are its special cases. Average run lengths are used to evaluate the performances of each of the control charts. It is worth mentioning that the proposed HEWMA control chart detects smaller shifts substantially quicker than the classical CUSUM, classical EWMA and mixed EWMA–CUSUM control charts. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献