Alkylating tryptic peptides to enhance electrospray ionization mass spectrometry analysis

A major limitation of mass spectrometry-based proteomics is inefficient and differential ionization during electrospray ionization (ESI). This leads to problems such as increased limits of detection and incomplete sequence coverage of proteins. Incomplete sequence coverage is especially problematic for analyses that require the detection and identification of specific peptides from a protein, such as the analysis of post-translational modifications. We describe here the development and use of aldehyde-based chemistry for the alkylation of peptide primary amines to increase peptide hydrophobicity, providing increased ionization efficiency and concomitant signal enhancement. When employed to modify the peptide products of protein tryptic digests, increased sequence coverage is obtained from combined modified and unmodified digests. To evaluate the utility of alkylation of peptides for selected reaction monitoring (SRM) assays, we alkylated a peptide from the protein Oct4, known to play a role in regulating stem cell differentiation. Increased chromatographic retention and ionization efficiency is observed for the alkylated Oct4 peptide compared to its unmodified form.     

Microfabricated polymer devices for automated sample delivery of peptides for analysis by electrospray ionization tandem mass spectrometry.

Delivery of proteins and peptides to electrospray ionization mass spectrometers (ESI-MS) has been demonstrated using glass and quartz microfabricated devices. This paper reports the construction and use of poly(dimethylsiloxane) (PDMS) microfabricated soft polymer devices with mass spectrometry for protein analysis. The PDMS devices were fabricated using replica molding against a patterned photoresist generated by photolithographic techniques. The PDMS devices were connected to the mass spectrometer via a derivatized transfer capillary and samples were transferred by electroosmotic pumping. The formulation of PDMS was optimized for compatibility with ESI, and the devices were tested for performance. The practical application of PDMS devices was demonstrated by the identification of rat serum albumin separated by 2-D gel electrophoresis. Extended contact of the sample with the surface of the PDMS device did not significantly affect the sample analysis, and the limit of detection for samples run on a PDMS device was comparable to the limit of detection achieved on glass devices. This study suggests that PDMS devices fabricated using replica molding are compatible with ESI-MS. This will potentially lead to the construction of inexpensive microfabricated devices with complex designs and advanced functionalities.     

Analysis of keratan sulfate oligosaccharides by electrospray ionization tandem mass spectrometry

Keratan sulfate (KS) is a glycosaminoglycan consisting of repeating disaccharide units composed of alternating residues of d-galactose and N-acetyl-d-glucosamine linked beta-(1-4) and beta-(1-3), respectively. In this study, electrospray ionization tandem mass spectrometry (ESI-MS/MS) was employed to identify keratan sulfate oligosaccharides. Two nonsulfated disaccharide isomers and two monosulfated disaccharide isomers were distinguished through MS/MS. In MS(1) spectra of multiply sulfated KS oligosaccharides, the charge state of the most abundant molecular ion equals the number of sulfates. Subsequent MS(2) and MS(3) spectra of mono-, di-, tri-, and tetrasulfated KS oligosaccharides and sialylated tetrasaccharides reveal diagnostic ions that can be used as fingerprint maps to identify unknown KS oligosaccharides. Based on the pattern of fragment ions, the compositions of an oligosaccharide mixture from shark cartilage KS and of two enzyme digests of bovine corneal KS were determined directly, without prior isolation of individual oligosaccharides by HPLC or other methods.     

Structural analysis of polymer end groups by electrospray ionization high-energy collision-induced dissociation tandem mass spectrometry

Chemical structures of polymer end groups play an important role in determining the functional properties of a polymeric system. We present a mass spectrometric method for determining end group structures. Polymeric ions are produced by electrospray ionization (ESI), and they are subject to source fragmentation in the ESI interface region to produce low-mass fragment ions. A series of source-fragment ions containing various numbers of monomer units are selected for high-energy collision-induced dissociation (CID) in a sector/time-of-flight tandem mass spectrometer. It is shown that high-energy CID spectra of source-induced fragment ions are very informative for end group structure characterization. By comparing the CID spectra of fragment ions with those of known chemicals, it is possible to unambiguously identify the end group structures. The utility of this technique is illustrated for the analysis of two poly(ethylene glycol)-based slow-releasing drugs where detailed structural characterization is of significance for drug formulation, quality control, and regulatory approval. Practical issues related to the application of this method are discussed.     

Immunoaffinity purification and characterization of 4-hydroxy-2-nonenal- and malondialdehyde-modified peptides by electrospray ionization tandem mass spectrometry

Two methods based on specific immunoaffinity enrichment followed by electrospray ionization (ESI) mass spectrometry (MS) have been developed for the specific analysis of 4-hydroxy-2-nonenal (HNE)- and malondialdehyde (MDA)-modified proteins (Michael and Schiff base adducts, respectively). Anti-HNE antibodies were immobilized on CNBr-activated sepharose, and the immunosorbent produced was used for the enrichment of HNE-adducted peptides originating from a model peptide modification and a tryptic digest of modified apomyoglobin. A further immunosorbent was produced by anti-dinitrophenyl immobilization and assayed for selective extraction of peptides modified with HNE and MDA that were initially converted to their respective hydrazones. Subsequent analysis and characterization of the different purified fractions by ESI-MS (MS/MS) revealed that the two immunosorbents enable efficient and specific enrichment of the carbonyl adducted proteins. This approach lowers substantially the detection limit of such modifications and, thus, enables better assessment and characterization of carbonyl modifications in biological and food systems.     

Sequencing of argentinated peptides by means of electrospray tandem mass spectrometry.

A strategy for semiautomatic sequencing of argentinated (silver-containing) oligopeptides has been developed. Sequencing is based on a search algorithm that identifies a triplet peak relationship in a product ion spectrum of the [M + Ag]+ ion of an oligopeptide. The ions that constitute a triplet are [bn + OH + Ag]+, [bn - H + Ag]+, and [a(n) - H + Ag]+, which are separated by 18 and 28 m/z units, respectively. The difference in the m/z values of adjacent triplets identifies the residue that is "cleaved". Observation of the [yn + H + Ag]+ ion containing the cleaved residue confirms the assignment. Sequencing of argentinated tryptic peptides may prove useful for automated proteome analysis via the sequence tag method.     

Pressurized electrochromatography coupled with electrospray ionization mass spectrometry for analysis of peptides and proteins

Pressurized capillary electrochromatography (pCEC) was coupled with electrospray ionization mass spectrometry (ESI-MS) using a coaxial sheath liquid interface. It was used for separation and analysis of peptides and proteins. The effects of organic modifier and applied voltage on separation were investigated, and the effects of pH value of the mobile phase and the concentration of the electrolyte on ESI-MS signal were investigated. The resolution and detection sensitivity with different separation methods (pCEC, capillary high-performance liquid chromatography) coupled on-line with mass spectrometry were compared for the separation of a peptide mixture. To evaluate the feasibility and reliability of the experimental setup of the system, tryptic digests of cytochrome c and modified protein as real samples were analyzed by using pCEC-ESI-MS.     

Identification and quantitation of unsaturated fatty acid isomers by electrospray ionization tandem mass spectrometry: a shotgun lipidomics approach

Identification and quantification of unsaturated fatty acid (FA) isomers in a biological system are significant in the study of lipid metabolism and catabolism, membrane biophysics, and pathogenesis of diseases but are challenging in lipidomics. We developed a novel approach for identification and quantitation of unsaturated FA isomers by exploiting two facts: (1) unsaturated FA anions yield fragment ion(s) from loss of CO(2) or H(2)O from the anions upon collision-induced dissociation; and (2) the fragment ions yielded from discrete FA isomers have distinct profiles of the fragment ion intensity vs. collision conditions. These distinct profiles likely result from the differential interactions of the negative charge of the fragment ion with the electron clouds of the double bonds due to their different distances in discrete FA isomers. The novel approach was also extended to analyze the double bond isomers of FA chains present in phospholipids by multistage tandem mass spectrometry. Collectively, we developed a new approach for identification and quantification of the double bond isomers of endogenous FA species or FA chains present in intact phospholipid species. We believe that this approach should further advance the lipidomic power for identification of the biochemical mechanisms underlying metabolic diseases.     

Organic chloramine analysis and free chlorine quantification by electrospray and atmospheric pressure chemical ionization tandem mass spectrometry

Atmospheric pressure chemical ionization (APCI) and electrospray ionization (ESI), together with tandem mass spectrometry (MSn), are used to study the mechanism of chlorination of amines and to develop a method for qualitative and quantitative determination of organic chloramines. Cyclohexylamine and 1,4-butanediamine (putrescine) are used as model compounds to investigate the mechanisms of the reactions between primary aliphatic amines and hypochlorous acid (aqueous Cl2). The chlorination products are identified and characterized by collision-induced dissociation (CID) and H/D exchange. Chlorination occurs by electrophilic addition of Cl+ and may be followed by HCl elimination, hydrolysis, or, in the case of diamines, amine elimination by intramolecular nucleophilic substitution. The relative rates of chlorination at amine and chloramine nitrogens are a function of pH and depend on the basicity of the amine. A novel method for active chlorine quantification using ESI or APCI mass spectrometry is suggested on the basis of the extent of chlorination of a sacrifical amine standard. This measurement has a limit of detection for N-chlorocyclohexylamine in the range of 0.1-10 microM, a linear dynamic range of 10(2)-10(3), and an accuracy of +/-10%, as determined for wastewater samples.     

Identification and quantitation of despropionyl-bezitramide in postmortem samples by liquid chromatography coupled to electrospray ionization tandem mass spectrometry.

A sensitive and specific method for the determination and quantitation of (despropionyl) bezitramide in postmortem samples using liquid chromatography combined with electrospray ionization tandem mass spectrometry (LC-ESI-MS/MS) is presented. The method is the result from a simple methodological transfer of a liquid chromatographic method with fluorescence detection (LC-FL) previously developed in our laboratory. A liquid-liquid back-extraction procedure using n-hexane isoamyl alcohol (93:7, v/v) as the extraction solvent is performed for a basic sample cleanup. N-Methyldespropionyl bezitramide is used as the internal standard. Chromatographic separation of the analytes of interest is achieved on a Hypersil ODS 5-micron column, using a 80:20 (v/v) mixture of 1.0 mM ammonium acetate and methanol/acetonitrile (50:50, v/v) and 1.0 mM ammonium acetate as the mobile phase. To obtain as high a sensitivity and selectivity as possible, a selected reaction-monitoring mass spectrometric technique is applied. In addition, low-energy collisional-activated dissociation (CAD) product ion spectra are recorded for a few samples. Calibration graphs are prepared for blood and urine, and good linearity is achieved over a concentration range of 1-150 ng/mL. The intra- and interassay coefficients of variation (CV%) for the analysis of quality control samples at 10 and 50 ng/mL concentration levels do not exceed 10.2% and percent of targets are within 12.1%. Postmortem samples (blood, urine, stomach contents, bile, liver, and kidney) from three fatalities, all suspected victims of drug overdoses, are analyzed, and the results are reported. The results obtained with LC-ESI-MS/MS are in close agreement with those obtained using the LC-FL method. Moreover, the isolates' identity and structure are confirmed by the CAD product ion spectra, thus allowing to make unequivocal conclusions about the prior intake of bezitramide by the three subjects.     

Identification of in-gel digested proteins by complementary peptide mass fingerprinting and tandem mass spectrometry data obtained on an electrospray ionization quadrupole time-of-flight mass spectrometer

The present study reports a procedure developed for the identification of SDS-polyacrylamide gel electrophoretically separated proteins using an electrospray ionization quadrupole time-of-flight mass spectrometer (Q-TOF MS) equipped with pressurized sample introduction. It is based on in-gel digestion of the proteins without previous reduction/alkylation and on the capability of the Q-TOF MS to provide data suitable for peptide mass fingerprinting database searches and for tandem mass spectrometry (MS/MS) database searches (sequence tags). Omitting the reduction/alkylation step reduces sample contamination and sample loss, resulting in increased sensitivity. Omitting this step can leave disulfide-connected peptides in the analyte that can lead to misleading or ambiguous results from the peptide mass fingerprinting database search. This uncertainty, however, is overcome by MS/MS analysis of the peptides. Furthermore, the two complementary MS approaches increase the accuracy of the assignment of the unknown protein. This procedure is thus, highly sensitive, accurate, and rapid. In combination with pressurized nanospray sample introduction, it is suitable for automated sample handling. Here, we apply this approach to identify protein contaminants observed during the purification of the yeast DNA mismatch repair protein Mlh 1.     

In-spray supercharging of peptides and proteins in electrospray ionization mass spectrometry

Enhanced charging, or supercharging, of analytes in electrospray ionization mass spectrometry (ESI MS) facilitates high resolution MS by reducing an ion mass-to-charge (m/z) ratio, increasing tandem mass spectrometry (MS/MS) efficiency. ESI MS supercharging is usually achieved by adding a supercharging reagent to the electrospray solution. Addition of these supercharging reagents to the mobile phase in liquid chromatography (LC)-MS/MS increases the average charge of enzymatically derived peptides and improves peptide and protein identification in large-scale bottom-up proteomics applications but disrupts chromatographic separation. Here, we demonstrate the average charge state of selected peptides and proteins increases by introducing the supercharging reagents directly into the ESI Taylor cone (in-spray supercharging) using a dual-sprayer ESI microchip. The results are comparable to those obtained by the addition of supercharging reagents directly into the analyte solution or LC mobile phase. Therefore, supercharging reaction can be accomplished on a time-scale of ion liberation from a droplet in the ESI ion source.     

Controlling charge states of peptides through inductive electrospray ionization mass spectrometry

A novel ionization device for controlling the charge states of peptides based on an inductive elecrospray ionization technique was developed. This ion source keeps the major capabilities of electrospray ionization (ESI) which is compatible with liquid separation techniques (such as liquid chromatography (LC) and capillary electrophoresis (CE)) and can be potentially used to control the charge states of peptides accurately by simply varying the AC voltage applied. In comparison with conventional ESI, inductive ESI successfully simplifies the mass spectrum by reducing the charge states of peptide to a singly charged one, as well as eliminating the adduct ions.     

Amino acid analysis by capillary electrophoresis electrospray ionization mass spectrometry

A method for the determination of underivatized amino acids based on capillary electrophoresis coupled to electrospray ionization mass spectrometry (CE-ESI-MS) is described. To analyze free amino acids simultaneously a low acidic pH condition was used to confer positive charge on whole amino acids. The choice of the electrolyte and its concentration influenced resolution and peak shape of the amino acids, and 1 M formic acid was selected as the optimal electrolyte. Meanwhile, the sheath liquid composition had a significant effect on sensitivity and the highest sensitivity was obtained when 5 mM ammonium acetate in 50% (v/v) methanol-water was used. Protonated amino acids were roughly separated by CE and selectively detected by a quadrupole mass spectrometer with a sheath flow electrospray ionization interface. Under the optimized conditions, 19 free amino acids normally found in proteins and several physiological amino acids were well determined in less than 17 min. The detection limits for basic amino acids were between 0.3 and 1.1 mumol/L and for acidic and low molecular weight amino acids were less than 6.0 mumol/L with pressure injection of 50 mbar for 3 s (3 nL) at a signal-to-noise ratio of 3. This method is simple, rapid, and selective compared with conventional techniques and could be readily applied to the analysis of free amino acids in soy sauce.     

Enhancing electrospray ionization efficiency of peptides by derivatization

With the advent of electrospray ionization mass spectrometry, the world was given a new way to look at complex peptide mixtures. Identification of proteins via their signature peptides requires ionization of a representative portion of the peptides derived from proteins by proteolysis. Unfortunately, matrix effects prohibited electrospray ionization of many peptides. This paper describes the development of a new labeling reagent that simultaneously adds a permanent positive charge to peptides and increases their hydrophobicity to enhance their ionization efficiency. The labeling agent is preactivated with N-hydroxysuccinimide to react with primary amines to form a peptide bond. In the most dramatic case, ionization efficiency of the peptide ADRDQYELLCLDNTRKPVDEYK increased 500-fold after derivatization as opposed to other peptides where ionization efficiency was impacted little. Ionization efficiency of peptides was enhanced roughly 10-fold in general by derivatization. Peptides of less than 500 Da experienced the greatest increase in ionization efficiency by derivatization. Poor ionization efficiency of native peptides was found to be due more to their inherent structural properties than the matrix in which ionization occurs.     

Statistical characterization of ion trap tandem mass spectra from doubly charged tryptic peptides

Collision-induced dissociation (CID) is a common ion activation technique used to energize mass-selected peptide ions during tandem mass spectrometry. Characteristic fragment ions form from the cleavage of amide bonds within a peptide undergoing CID, allowing the inference of its amino acid sequence. The statistical characterization of these fragment ions is essential for improving peptide identification algorithms and for understanding the complex reactions taking place during CID. An examination of 1465 ion trap spectra from doubly charged tryptic peptides reveals several trends important to understanding this fragmentation process. While less abundant than y ions, b ions are present in sufficient numbers to aid sequencing algorithms. Fragment ions exhibit a characteristic series-specific relationship between their masses and intensities. Each residue influences fragmentation at adjacent amide bonds, with Pro quantifiably enhancing cleavage at its N-terminal amide bond and His increasing the formation of b ions at its C-terminal amide bond. Fragment ions corresponding to a formal loss of ammonia appear preferentially in peptides containing Gln and Asn. These trends are partially responsible for the complexity of peptide tandem mass spectra.     

Identification of phosphoserine and phosphothreonine as cysteic acid and beta-methylcysteic acid residues in peptides by tandem mass spectrometric sequencing

Tandem mass spectrometry has long been an intrinsic tool to determine phosphorylation sites in proteins. However, loss of the phosphate moiety from both phosphoserine and phosphothreonine residues in low-energy collision-induced dissociation is a common phenomenon, which makes identification of P-Ser and P-Thr residues complicated. A method for direct sequencing of the Ser and Thr phosphorylation sites by ESI tandem mass spectrometry following beta-elimination/sulfite addition to convert -HPO4 to -SO3 has been studied. Five model phosphopeptides, including three synthetic P-Ser-, P-Thr-, or P-Ser- and P-Thr-containing peptides; a protein kinases C-phosphorylated peptide; and a phosphopeptide derived from beta-casein trypsin digests were modified and then sequenced using an ESI-quadrupole ion trap mass spectrometer. Following incubation of P-Ser- or P-Thr-containing peptides with Na2SO3/NaOH, 90% P-Ser and 80% P-Thr was converted to cysteic acid and beta-methylcysteic acid, respectively, as revealed by amino acid analysis. The conversion can be carried out at 1 microM concentration of the peptide. Both cysteic acid and beta-methylcysteic acid residues in the sequence were shown to be stable and easily identifiable under general conditions for tandem mass spectrometric sequencing applicable to common peptides.     

Trace analysis of proteins using postseparation solution-phase digestion and electrospray mass spectrometric detection of marker peptides

Analytical methodologies for the absolute quantitation of proteins typically include a digest step often using trypsin as the proteolytic enzyme. In the majority of cases, off-line and on-line digestion methods are implemented prior to an LC-MS analysis system, requiring a high sequence coverage for unambiguous protein identification. For proteins with a strong overlap in amino acid sequence, e.g., therapeutic proteins and their metabolites, it is essential to separate proteins prior to digestion and the subsequent electrospray mass spectrometry analysis of marker peptides. Here, we present an on-line postcolumn solution-phase digestion methodology that is based on the continuous infusion of the proteolytic enzyme pepsin downstream to the nano C18 reversed-phase column. Proteins are identified based on their retention time in combination with the detection of specific marker peptides formed in the postcolumn digest. The optimization of important parameters such as enzyme concentration, reaction time, and organic modifier concentration is described. We demonstrated that the continuous-flow solution-phase digest method can be coupled on-line to the reversed-phase gradient liquid chromatography separation of proteins. Detection limits obtained for five model proteins, detected as specific marker peptides with m/z values of 300-1000, range from 30 to 90 fmol, with a linear response up to 3 pmol.     

Sequencing of sulfated oligosaccharides from mucins by liquid chromatography and electrospray ionization tandem mass spectrometry

As part of a strategy for profiling diverse mixtures of sulfated mucin-derived oligosaccharides, liquid chromatography coupled to electrospray ionization tandem mass spectrometry (ESI-MS/MS) in the negative ion mode has been explored. Two mixtures of sulfated oligosaccharide alditols from porcine stomach and large intestine were analyzed by straight phase chromatography using an amino-bonded column connected to a Q-TOF instrument. Nine sulfated mucin-derived oligosaccharide alditols from porcine stomach underwent extensive fragmentation allowing determination of their sequence. The fragmentation generated primary, secondary, and tertiary fragment ions informative for the elucidation of the saccharide sequence and localization of the sulfate group. From a single chromatographic analysis, the sequences of 28 different sulfated mucin oligosaccharide alditols purified from porcine large intestine were elucidated, revealing information concerning prominent core sequences and terminal blood group-type epitopes. Analysis of these two sulfated oligosaccharide mixtures demonstrated the usefulness of HPLC-ESI-MS/MS: the on-line separation of multiple isomeric suffated oligosaccharides as present in biological samples, informative fragmentation allowing the identification of the sequence of nonderivatized oligosaccharides, and a sensitivity sufficient for the analysis of quantities as obtained from natural sources.     

Estimates of protein surface areas in solution by electrospray ionization mass spectrometry

The extent of multiple charging of protein ions in electrospray ionization (ESI) mass spectra depends on the solvent-exposed surface area, but it may also be influenced by a variety of other extrinsic and intrinsic factors. Gas-phase ion chemistry (charge-transfer and charge-partitioning reactions) appears to be the major extrinsic factor influencing the extent of protonation as detected by ESI MS. In this work, we demonstrate that under carefully controlled conditions, which limit the occurrence of the charge-transfer reactions in the gas phase, charge-state distributions of protein ions can be used to assess the solvent-exposed surface area in solution. A set of proteins ranging from 5-kDa insulin to 500-kDa ferritin shows a clear correlation between the average charge in ESI mass spectra acquired under native conditions and their surface areas calculated based on the available crystal structures. An increase of the extent of charge-transfer reactions in the ESI interface results in a noticeable decrease of the average charge of protein ions across the entire range of tested proteins, while the charge-surface correlation is maintained. On the other hand, the intrinsic factors (e.g., a limited number of basic residues) do not appear to play a significant role in determining the protein ion charge. Based on these results, it is now possible to obtain estimates of the surface areas of proteins and protein complexes, for which crystal structures are not available. We also demonstrate how the ESI MS measurements can be used to characterize protein-protein interaction in solution by providing quantitative information on the subunit interfaces formed in protein associations.