Application of catalytic membrane reactor for pure hydrogen production by flare gas recovery as a novel approach

In the present study, application of catalytic membrane reactor as a novel approach for the flare gas recovery is proposed. A comprehensive two-dimensional non-isothermal model has been constructed to evaluate the performance of flare gas recovery process in the membrane reactor. The model is developed by taking into accounts the main chemical kinetics, heat and mass transfer phenomena and hydrogen permeation in the radial direction across a Pd–Ag membrane. The model predictions are validated based on different experimental results reported in literature. The impact of reactor operating conditions on the recovery process such as temperature and pressure, feed molar ratio and sweep gas ratio are investigated and discussed. The modeling results confirm that the flare gas conversion and hydrogen recovery improves with increasing the operating temperature, pressure and sweep ratio as a consequence of increasing the driving force for H₂ permeation through membrane. The environmental consideration revealed that by application of catalytic membrane reactor for the flare gas recovery of Asalouyeh gas processing plant (Iran), not only the equivalent mass of greenhouse gases emission reduces from 2179 kg/s to 36 kg/s, but also, 12.7 kg/s pure hydrogen will be produced by flare gas recovery at 750 K, 5 bar, sweep ratio of 5 and feed molar ratio of 4.     

Research and development on membrane IS process for hydrogen production using solar heat

Thermochemical hydrogen production has attracted considerable interest as a clean energy solution to address the challenges of climate change and environmental sustainability. The thermochemical water-splitting iodine-sulfur (IS) process uses heat from nuclear or solar power and thus is a promising next-generation thermochemical hydrogen production method that is independent of fossil fuels and can provide energy security. This paper presents the current state of research and development (R&D) of the IS process based on membrane techniques using solar energy at a medium temperature of 600 °C. Membrane design strategies have the most potential for making the IS process using solar energy highly efficient and economical and are illustrated here in detail. Three aspects of membrane design proposed herein for the IS process have led to a considerable improvement of the total thermal efficiency of the process: membrane reactors, membranes, and reaction catalysts. Experimental studies in the applications of these membrane design techniques to the Bunsen reaction, sulfuric acid decomposition, and hydrogen iodide decomposition are discussed.     

Enhancement of pure hydrogen production through the use of a membrane reactor

Pure hydrogen production is of great interest as it is an energy carrier which can be used in PEM fuel cells for power production. Methane Steam Reforming (MSR) is commonly used for hydrogen production although the produced hydrogen is not free of other components. Membrane Reactors (MR) enable a pure hydrogen product stream and allows the reaction to take place at significantly lower temperatures (lower than 550 °C) than in conventional reactors (greater than 800 °C) with comparable methane conversion. This is achieved by hydrogen removal through a permselective Pd–Ag based membrane that cause a favorable shift in chemical equilibrium towards hydrogen production. In the present study, a two-dimensional, nonlinear, and pseudo-homogeneous mathematical model of a catalytic fixed-bed membrane reactor for methane steam reforming over a nickel-based foam supported catalyst is presented. Simulated results referring to the distribution of species, methane conversion, temperature and hydrogen flowrate along the reactor for different radial positions are obtained and analyzed. The performance of structured catalyst and catalyst supported on foam configurations under the same operating conditions is also studied. Experimental results for the membrane facilitate the identification of suitable operating conditions.     

Module design of silica membrane reactor for hydrogen production via thermochemical IS process

The potential of the silica membrane reactors for use in the decomposition of hydrogen iodide (HI) was investigated by simulation with the aim of producing CO₂-free hydrogen via the thermochemical water-splitting iodine-sulfur process. Simulation model validation was done using the data derived from an experimental membrane reactor. The simulated results showed good agreement with the experimental findings. The important process parameters determining the performance of the membrane reactor used for HI decomposition, namely, reaction temperature, total pressures on both the feed side and the permeate side, and HI feed flow rate were investigated theoritically by means of a simulation. It was found that the conversion of HI decomposition can be improved by up to four times (80%) or greater than the equilibrium conversion (20%) at 400 °C by employing a membrane reactor equipped with a tubular silica membrane. The features to design the membrane reactor module for HI decomposition of the thermochemical iodine-sulfur process were discussed under a wide range of operation conditions by evaluating the relationship between HI conversion and number of membrane tubes.     

Tube-wall catalytic membrane reactor for hydrogen production by low-temperature ammonia decomposition

Ammonia has attracted great interest as a chemical hydrogen carrier. However, ammonia decomposition is limited kinetically rather than thermodynamically below 400 °C. We developed a tube-wall catalytic membrane reactor that could decompose ammonia with high conversion even at temperatures below 400 °C. The reactor had excellent heat transfer characteristics, and thus nearly 100% conversion for an NH3 feed of 10 mL/min at 375 °C was achieved with a 2-μm-thick palladium composite membrane, and hydrogen removal from the decomposition side resulted in a large kinetic acceleration.     

Design and operational considerations of packed-bed membrane reactor for distributed hydrogen production by methane steam reforming

Methane steam reforming will still account for most of hydrogen production in the coming decades. Membrane reactor can play a key role in both energy saving and process/equipment compactness, particularly for its decentralized applications. Here we design a particles-based packed-bed membrane reactor and explore the operational window and design challenges by conducting systematic study experimentally and computationally, particularly emphasizing geometrical scale of membrane reactor and catalyst activity. The results show that membrane reactor presents maximum hydrogen flux by consuming unit methane under the optimized operation conditions of GHSV (i.e., 1134 hr^?1) and steam-to-carbon ratio (i.e., 2), and computational study shows that optimal operation window is around 30 atm and 773.15 K. Moreover, the design criteria of “Catalyst activity – Membrane performance – Radial depth” is revealed quantitatively and catalyst activity is identified as the key limiting factor for further process intensification. Briefly, these results shed some lights on operation, optimal design, and further improvement of membrane reactor in methane steam reforming.     

Performance assessment and evaluation of catalytic membrane reactor for pure hydrogen production via steam reforming of methanol

The steam reforming of methanol was investigated in a catalytic Pd–Ag membrane reactor at different operating conditions on a commercial Cu/ZnO/Al₂O₃ catalyst. A comprehensive two-dimensional non-isothermal stationary mathematical model has been developed. The present model takes into account the main chemical reactions, heat and mass transfer phenomena in the membrane reactor with hydrogen permeation across the PdAg membrane in radial direction. Model validation revealed that the predicted results satisfy the experimental data reasonably well under the different operating conditions. Also the impact of different operating parameters including temperature, pressure, sweep ratio and steam ratio on the performance of reactor has been examined in terms of methanol conversion and hydrogen recovery. The modeling results have indicated the high performance of the membrane reactor which is related to continuous removal of hydrogen from retentate side through the membrane to shift the reaction equilibrium towards formation of hydrogen. The obtained results have confirmed that increasing the temperature improves the kinetic properties of the catalyst and increase in the membrane's H₂ permeance, which results in higher methanol conversion and hydrogen production. Also it is inferred that the hydrogen recovery is favored at higher temperature, pressure, sweep ratio and steam ratio. The model prediction revealed that at 573 K, 2 bar and sweep ratio of 1, the maximum hydrogen recovery improves from 64% to 100% with increasing the steam ratio from 1 to 4.     

Toward enhanced hydrogen production in a catalytic naphtha reforming process

Environmental regulations imposed on transport fuels, especially specifications on sulfur and nitrogen content, generally boost hydrogen requirements in refining industries. The catalytic naphtha reformer (CNR) process is one of the major sources of hydrogen in naphtha refinery, thus improving its hydrogen production would be of great importance for refining industries. Close examination of the reaction kinetics of CNR processes has identified temperature, hydrogen concentration and catalyst activity as key variables affecting the process's performance. In this paper, a new reactor concept is developed that better exploits these process variables. The proposed membrane moving-bed reactor promises to significantly outperform the conventional continuous catalyst regenerative (CCR) design. A case study identifies improvements of 23.6 mol% in hydrogen production, 18.8 mol% in aromatics production. Moreover, the reformate yield was found to increase by 10.6 wt%, while the production of light gases decreases to a value of 18.6 wt%.     

Enhancement of methanol production in a novel fluidized-bed hydrogen-permselective membrane reactor in the presence of catalyst deactivation

In this study, a dynamic model for a novel bubbling fluidized-bed membrane dual-type methanol reactor has been developed in the presence of long-term catalyst deactivation. The proposed model has been used to compare the performance of a novel fluidized-bed membrane dual-type methanol reactor (FMDMR) with membrane dual-type methanol reactor (MDMR) and conventional dual-type methanol reactor (CDMR). In this new concept, the feed synthesis gas is preheated in the tubes of the gas-cooled reactor and flowing in a counter-current mode with reacting gas mixture in the shell side. Due to the hydrogen partial pressure driving force, hydrogen can penetrate from feed synthesis gas into the reaction side through the membrane. The outlet synthesis gas from this reactor is fed to tubes of the water-cooled packed-bed reactor and the chemical reaction is initiated by the catalyst. The methanol-containing gas leaving this reactor is directed into the shell of the gas-cooled reactor and the reactions are completed in this fluidized-bed side. This reactor configuration solves some observed drawbacks of new conventional dual-type methanol reactor such as pressure drop, internal mass transfer limitations, radial gradient of concentration and temperature in gas-cooled reactor. The proposed dynamic model has been validated against measured daily process data of a methanol plant recorded for a period of four years and a good agreement has been achieved. The simulation results show there is a favorable profile of temperature and activity along the fluidized-bed membrane dual-type reactor relative to membrane and conventional dual-type reactor systems. Therefore, the performance of methanol reactor system improves when membrane assisted fluidized-bed concept is used for conventional dual-type reactor system.     

A novel cascade membrane reactor concept for methanol synthesis in the presence of long‐term catalyst deactivation

In this study, a dynamic model for a novel cascade membrane methanol reactor (CMMR) in the presence of long term catalyst deactivation was developed. In the first catalyst bed the synthesis gas partially convert to methanol. In the second reactor the reaction heat is used to preheat the feed gas to the first bed. The wall of the tubes in the both of reactors is covered with a palladium–silver membrane. The simulation results represent 4.7% and 3.92% enhancement in the yield of methanol production during 1400 days of operation in the CMMR in comparison with conventional dual type methanol reactor (CDMR) and membrane dual type methanol reactor (MDMR), respectively and a favorable profile of temperature and activity along the CMMR relative to MDMR and CDMR. Copyright © 2010 John Wiley & Sons, Ltd.     

Steam reforming of propane in a fluidized bed membrane reactor for hydrogen production

Steam reforming of propane was carried out in a fluidized bed membrane reactor to investigate a feedstock other than natural gas for production of pure hydrogen. Close to equilibrium conditions were achieved inside the reactor with fluidized catalyst due to the very fast steam reforming reactions. Use of hydrogen permselective Pd₇₇Ag₂₃ membrane panels to extract pure hydrogen shifted the reaction towards complete conversion of the hydrocarbons, including methane, the key intermediate product. Irreversible propane steam reforming is limited by the reversibility of the steam reforming of this methane. To assess the performance improvement due to pure hydrogen withdrawal, experiments were conducted with one and six membrane panels installed along the height of the reactor. The results indicate that a compact reformer can be achieved for pure hydrogen production for a light hydrocarbon feedstock like propane, at moderate operating temperatures of 475–550 °C, with increased hydrogen yield.     

3D simulation of hydrogen production by ammonia decomposition in a catalytic membrane reactor

Ammonia decomposition in an integrated Catalytic Membrane Reactor for hydrogen production was studied by numerical simulation. The process is based on anhydrous NH₃ thermal dissociation inside a small size reactor (30 cm³), filled by a Ni/Al₂O₃ catalyst. The reaction is promoted by the presence of seven Pd coated tubular membranes about 203 mm long, with an outer diameter of 1.98 mm, which shift the NH₃ decomposition towards the products by removing hydrogen from the reaction area. The system fluid-dynamics was implemented into a 2D and 3D geometrical model. Ammonia cracking reaction over the Ni/Al₂O₃ catalyst was simulated using the Temkin-Pyzhev equation.Introductory 2D simulations were first carried out for a hypothetic system without membranes. Because of reactor axial symmetry, different operative pressures, temperatures and input flows were evaluated. These introductory results showed an excellent ammonia conversion at 550 °C and 0.2 MPa for an input flow of 1.1 mg/s, with a residual NH₃ of only a few ppm. 3D simulations were then carried out for the system with membranes. Hydrogen adsorption throughout the membranes has been modeled using the Sievert’s law for the dissociative hydrogen flux. Several runs have been carried out at 1 MPa changing the temperature between 500 °C and 600 °C to point out the conditions for which the permeated hydrogen flux is the highest. With temperatures higher than 550 °C we obtained an almost complete ammonia conversion already before the membrane area. The working temperature of 550 °C resulted to be the most suitable for the reactor geometry. A good matching between membrane permeation and ammonia decomposition was obtained for an NH₃ input flow rate of 2.8 mg/s. Ammonia reaction shift due to the presence of H₂ permeable membranes in the reactor significantly fostered the dissociation: for the 550 °C case we obtained a conversion rate improvement of almost 18%.     

Mathematical modeling of hydrogen production using methanol steam reforming in the coupled membrane reactor when the output materials of the reformer section is used as feed for the combustion section

Hydrogen is one of the most abundant elements on Earth's surface. It is not in nature in its pure form, but it can produce by various methods such as methanol steam reforming, partial oxidation, electrolysis, etc. In the present study, using the mass and energy conservation law, hydrogen production in coupled membrane reactors has been modeled using the methanol steam reforming process using two different methods in the coupled membrane reactor. A separate (fresh) methanol is used as feed for the combustion section in the first method. While in the second method, the reformer reactor's output material is used as feed for the combustion section. After simplifying using the required assumptions, the governing equations solved using the ode45 (shooting method) numerical method using MATLAB software. The results of this study show that the conversion of methanol in the coupled membrane reactor when separate methanol is used as feed in the combustion reactor, while in the same reactor, the output material of the reformer section used as feed in the combustion section, is 92% and 88.5% respectively. In this study, the effect of different parameters on the methanol conversion rate is investigated. Finally, it found that with increasing temperature and pressure and decreasing membrane thickness in coupled membrane reactors, methanol conversion rate increases. The percentage of hydrogen recovery in the two coupled membrane reactors is almost equal to 92%.     

Ultra-pure hydrogen production via ammonia decomposition in a catalytic membrane reactor

In this work two alternatives are presented for increasing the purity of hydrogen produced in a membrane reactor for ammonia decomposition. It is experimentally demonstrated that either increasing the thickness of the membrane selective layer or using a small purification unit in the permeate of the membranes, ultra-pure hydrogen can be produced. Specifically, the results show that increasing the membrane thickness above 6 μm ultra-pure hydrogen can be obtained at pressures below 5 bar. A cheaper solution, however, consists in the use of an adsorption bed downstream the membrane reactor. In this way, ultra-pure hydrogen can be achieved with higher reactor pressures, lower temperatures and thinner membranes, which result in lower reactor costs. A possible process diagram is also reported showing that the regeneration of the adsorption bed can be done by exploiting the heat available in the system and thus introducing no additional heat sources.     

Pure hydrogen production via autothermal reforming of ethanol in a fluidized bed membrane reactor: A simulation study

In this paper the production of ultra-pure hydrogen via autothermal reforming of ethanol in a fluidized bed membrane reactor has been studied. The heat needed for the steam reforming of ethanol is obtained by burning part of the hydrogen recovered via the hydrogen perm-selective membrane thereby integrating CO₂ capture. Simulation results based on a phenomenological model show that it is possible to obtain overall autothermal reforming of ethanol while 100% of hydrogen can in principle be recovered at relatively high temperatures and at high reaction pressures. At the same operating conditions, ethanol is completely converted, while the methane produced by the reaction is completely reformed to CO, CO₂ and H₂.     

Equilibrium shift of methylcyclohexane dehydrogenation in a thermally stable organosilica membrane reactor for high-purity hydrogen production

A high-performance organosilica membrane was prepared via sol–gel processing for use in methylcyclohexane (MCH) dehydrogenation to produce high-purity hydrogen. The membrane showed a high H₂ permeance of 1.29 × 10⁻⁶ mol m⁻² s⁻¹ Pa⁻¹, with extremely high H₂/C₃H₈ and H₂/SF₆ selectivities of 6680 and 48,900, respectively, at 200 °C. The extraction of hydrogen from the membrane reactor led to the MCH conversion higher than the thermodynamic equilibrium, with almost pure hydrogen obtained in the permeate stream without considering the effect of carrier gas and sweep gas in the membrane reactor, and the organosilica membrane reactor was very stable under the reaction conditions employed.     

Single-step synthesized dual-layer hollow fiber membrane reactor for on-site hydrogen production through ammonia decomposition

On-site hydrogen production via catalytic ammonia decomposition presents an attractive pathway to realize H₂ economy and to mitigate the risk associated with storing large amounts of H₂. This work reports the synthesis and characterization of a dual-layer hollow fiber catalytic membrane reactor for simultaneous NH₃ decomposition and H₂ permeation application. Such hollow fiber was synthesized via single-step co-extrusion and co-sintering method and constitutes of 26 μm-thick mixed protonic-electronic conducting Nd_5.5Mo_0.5W_0.5O_11.25-δ (NMW) dense H₂ separation layer and Nd_5.5Mo_0.5W_0.5O_11.25-δ-Ni (NMW-Ni) porous catalytic support. This dual-layer NMW/NMW-Ni hollow fiber exhibited H₂ permeation flux of 0.26 mL cm⁻² min⁻¹ at 900 °C when 50 mL min⁻¹ of 50 vol% H₂ in He was used as feed gas and 50 mL min⁻¹ N₂ was used as sweep gas. Membrane reactor based on dual-layer NMW/NMW-Ni hollow fiber achieved NH₃ conversion of 99% at 750 °C, which was 24% higher relative to the packed-bed reactor with the same reactor volume. Such higher conversion was enabled by concurrent H₂ extraction out of the membrane reactor during the reaction. This membrane reactor also maintained stable NH₃ conversion and H₂ permeation flux as well as structure integrity over 75 h of reaction at 750 °C.     

Silver and oxide hybrids of catalysts during formaldehyde production

Hybrid catalysts are engineered to contain elements of two or more catalysts. Hybrid catalysts are providing increasingly important advantages for obtaining novel and desirable catalyst activities and properties. The nature of a hybrid catalyst can be changed with additional characteristics. The disadvantages can be divided and the advantages multiplied.