Ni foil supported FeNiP nanosheet coupled with NiS as highly efficient electrocatalysts for hydrogen evolution reaction

The investigation and development of bimetallic phosphosulphide electrocatalyst with low cost and abundant reserves is extremely significant for the improvement of the efficiency of hydrogen evolution reaction (HER), while it remains a challenge. Herein, we explored a feasible method to prepare three-dimensional (3D) self-supported FeNiP-S/NF-5 nanosheet arrays on Ni foil (NF) by hydrothermal method and in situ phosphorization and following sulfurization treatment. The as-obtained FeNiP-S/NF-5 only needs a potential of 183 mV vs. RHE to reach 20 mA cm⁻², which is smaller than that of FeNiP/NF (187 mV vs. RHE) and FeNiS/NF-5 (239 mV vs. RHE), presenting excellent electrocatalytic stability. Such outstanding performance of the FeNiP-S/NF-5 can be attributed to following several reasons: (i) bi-metallic phosphide and sulphide have the high intrinsic activity because of its synergistic effect; (ii) the 3D nanosheet arrays structure of FeNiP-S/NF-5 is conducive to expose plentiful active sites and facilitate the electrolyte penetration along with electron transportation; (iii) the sulfurization process followed phosphorization treatment could further optimize their electronic structure and inhibited the surface oxidation of catalyst in the catalytic process.     

MOFs-derived hybrid nanosheet arrays of nitrogen-rich CoS2 and nitrogen-doped carbon for efficient hydrogen evolution in both alkaline and acidic media

Rational design of highly active, economical and stable electrocatalysts for hydrogen evolution reaction (HER) is still a great challenge for future applications. Herein, we use a 2D metal-organic framework array as the reactive template and precursor, to fabricate a hybrid nanosheet array of nitrogen-rich CoS₂@nitrogen-doped carbon on Ti foil substrate (N–CoS₂@NC/Ti) through a simple thermal treatment in the presence of thiourea. Owing to the prominent synergistic effect of the coupling between CoS₂ and NC, a high content of Co-N_x species as well as unique nanoarray architectures, the as-synthesized N–CoS₂@NC/Ti electrode exhibits remarkable activity and robust durability for HER under both acidic and alkaline conditions, which is obviously superior to the CoS₂@NC/Ti.     

Synergistic coupling of CoFe-layered double hydroxide nanosheet arrays with reduced graphene oxide modified Ni foam for highly efficient oxygen evolution reaction and hydrogen evolution reaction

Novel CoFe-LDH (layered double hydroxide) nanosheet arrays in situ grown on rGO (reduced graphene oxide) uniformly modified Ni foam were synthesized by a citric acid-assisted aqueous phase coprecipitation strategy. Systematic characterizations indicates that the series of Co_xFe₁-LDH/rGO/NF (x = 4, 3, 2) all show Co_xFe₁-LDH nanosheets (150–180 × 15 nm) grown vertically on the surface of rGO/NF. Especially, the Co₃Fe₁-LDH/rGO/NF exhibits the best performance with overpotentials of 250 and 110 mV at 10 mA cm^?2 in 1 M KOH for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER), respectively. When it is used as cathode and anode simultaneously for overall water splitting, they require 1.65 and 1.84 V at 10 and 100 mA cm^?2, respectively. Excellent performance of Co₃Fe₁-LDH/rGO/NF is due to the nanosheet arrays structure with open channels, synergistic coupling between Co₃Fe₁-LDH and rGO enhancing electrical conductivity, and in-situ growth of Co₃Fe₁-LDH on rGO/NF enhancing stability.     

Self-supported three-dimensional WP2 (WP) nanosheet arrays for efficient electrocatalytic hydrogen evolution

The development of highly efficient, stable, eco-friendly and low-cost noble-metal-free electrocatalysts is still a great challenge to generate large scale hydrogen fuel from water. In this concern, self-supported WP₂ and WP nanosheet (NS) arrays were prepared through an in-situ solid-phase phosphidation of WO₃ nanosheet arrays on carbon cloth (CC), whereas, different phosphating temperatures of 650 °C, 800 °C for 2 h, has been utilized to attain different WP₂ NS/CC, WP NS/CC catalysts. Remarkably, the electrocatalysts of WP₂ and WP NS arrays exhibit an outstanding hydrogen evolution (HER) performance in acidic environment, with a low overpotential of 140 mV and 175 mV at 10 mA cm⁻², a Tafel slope of 85 mV dec⁻¹ and 103 mV dec⁻¹, respectively. Furthermore, Density Functional Theory (DFT) calculations reveal that the enhanced HER activity of WP₂ catalyst is attributed to the lowered hydrogen adsorption free energy on WP₂ surface, which is much lesser than that on the WP catalyst surface. As a result, WP₂ exhibit superior intrinsic catalytic activity than WP. This study offers a valuable way for the synthesis of highly efficient three-dimensional self-supporting catalytic electrodes, and beneficial for realizing the intrinsic electrocatalytic properties of tungsten phosphide for improved water splitting reactions.     

Ni(OH)2/ NiSe2 hybrid nanosheet arrays for enhanced alkaline hydrogen evolution reaction

Developing efficient, non-noble electrocatalysts toward hydrogen evolution reaction (HER) in alkaline electrolytes is of important significance for future energy supplement but still a challenge. Recently, pyrite-type NiSe₂ nanomaterial has been considered as an idea HER electrocatalyst due to its high conductivity, strong corrosion resistance and low cost. However, the HER performance of NiSe₂ in alkaline electrolytes is still unsatisfactory, which is possibly limited to the activate water dissociation in alkaline media. Herein, a novel hybrid electrocatalyst of Ni(OH)₂/NiSe₂ nanosheet arrays on carbon cloth (Ni(OH)₂/NiSe₂/CC) is fabricated, exhibiting excellent HER catalytic activity with a low overpotential of 82 mV to drive a current density of 10 mAcm⁻² as well as maintaining a long-term durability for 12 h in 1.0 M KOH, which is 77 mV less than that of NiSe₂/CC and superior to most recently reported non-noble HER electrocatalysts. In addition, the Tafel slope of Ni(OH)₂/NiSe₂/CC (60 mV dec ⁻¹) is also much smaller than that of NiSe₂/CC (112 mV dec ⁻¹), suggesting a promotion kinetics of HER process for Ni(OH)₂/NiSe₂/CC. Our further experimental results show that the significantly improved activity of Ni(OH)₂/NiSe₂/CC electrode should ascribe to its enlarged active surface, good conductivity and interfacial synergy between Ni(OH)₂ and NiSe₂. The synergetic strategy may provide an efficient way to promote the HER activity of other non-noble transition metal selenides in alkaline electrolyte.     

Synthesis of Co2FeAl alloys as highly efficient electrocatalysts for alkaline hydrogen evolution reaction

The development of cost-effective non-precious metal electrocatalysts is a major challenge for water splitting applications, but it is important for the realization of renewable energy systems. Alloying has proved an effective way to design metal-based electrocatalysts, and by controlling the annealing temperature, the surface morphology and crystallinity of the alloy can be tuned to control the hydrogen evolution reaction (HER) performance. In this work, with a simple coprecipitation method, we have prepared Co₂FeAl alloys at different annealing temperatures (550 °C–670 °C), which exhibit excellent crystallinity and electrocatalytic performance for HER in alkaline solution. Among all conditions, the Co₂FeAl alloys prepared at 620 °C shows the better crystallinity and the higher purity, and it could achieve a low overpotential of 149 mV at 10 mA cm^?2 in alkaline solution. The overpotential demonstrates persistent stability with only 3 mV change after over 1000 cycles. Both density functional theory (DFT) calculations and experimental results revealed that alloying optimizes the electronic structure near the Fermi surface of the system, improving the electron transport efficiency and enhancing the catalytic activity. These Co₂FeAl alloys are appealing candidates for high-performance alkaline HER electrocatalytic electrodes in water electrolysis due to their outstanding electrocatalytic properties.     

Maize-like CoP nanorod arrays as an efficient and robust electrocatalyst for superior hydrogen generation

High-performance, low-cost and robust electrocatalysts for the hydrogen evolution reaction (HER) play a critical role in large-scale hydrogen production via water splitting. Herein, we proposed a synthesis strategy for the self-assembly of maize-like CoP nanorod arrays with abundant active sites via a combination of conventional hydrothermal reaction and low-temperature phosphorization. This unique architecture exhibited remarkable catalytic performance for the HER, with a low overpotential of 130 mV at a current density of 10 mA cm^?2 and a small Tafel slope of 59 mV dec^?1 in 1.0 M KOH electrolyte, as well as good stability as verified by chronoamperometry measurement for 10 h. Density functional theory calculations further revealed that these maize-like CoP nanorod arrays with dense active sites and a high phosphorization degree could boost the HER performance in terms of low adsorption energy and free energy. This work provided a facile strategy towards manipulating morphology engineering to enhance the HER activity of CoP-based catalysts.     

Porous flower-like nickel nitride as highly efficient bifunctional electrocatalysts for less energy-intensive hydrogen evolution and urea oxidation

Finding a suitable replacement for the high potential of anodic water electrolysis (oxygen evolution reaction (OER)) is significant for hydrogen energy storage and conversion. In this work, a simple and scalable method synthesizes a structurally unique Ni₃N nanoarray on Ni foam, Ni₃N-350/NF, that provides efficient electrocatalysis for the urea oxidation reaction (UOR) that transports 10 mA cm⁻² at a low potential of 1.34 V. In addition, Ni₃N-350/NF exhibits electro-defense electrocatalytic performance for hydrogen evolution reaction, which provides a low overpotential of 128 mV at 10 mA cm⁻². As proof of concept, all-water-urea electrolysis measurement is carried out in 1 M KOH with 0.5 M Urea with Ni₃N-350/NF as cathode and anode respectively. Ni₃N-350/NF||Ni₃N-350/NF electrode can provide 100 mA cm⁻² at a voltage of only 1.51 V, 160 mV less than that of water electrolysis, which proves its commercial viability in energy-saving hydrogen production.     

NiFe layered double hydroxide nanosheet arrays for efficient oxygen evolution reaction in alkaline media

Exploring efficient oxygen evolution reaction (OER) catalysts synthesized from low-cost and earth-abundant elements are crucial to the progression of water splitting. In this paper, NiFe layered double hydroxide (LDH) nanosheets were grown on Ni foam (NF) through a straightforward hydrothermal method. The Fe doping effects were systematically investigated by controlling Ni/Fe ratios and Fe valence states, and the in-depth influence mechanisms were discussed. The results indicate that, through controlling structure morphology and enhancing Ni²⁺ oxidation, NiFe_III(1:1)-LDH displays the best and outstanding OER performance, with a low over potential of 382 mV at 50 mA cm^?2, a low Tafel slope of 31.1 mVdec^?1 and only 20 mV increase after 10 h continuous test at 50 mA cm^?2. To our knowledge, this is one of the best OER electrocatalysts in alkaline media to date. This work provides a facile and novel strategy for the fabrication of bimetallic LDH catalysts with desired structures and compositions.     

Pulse-activation engineering induced lattice transformation of layered double hydroxides for efficient alkaline hydrogen evolution

In order to accelerate water dissociation kinetics and improve hydrogen evolution reaction (HER) in alkaline electrolyzer, pulse-activation engineering was proposed to induce lattice transformation of layered double hydroxides (LDHs) electrocatalysts. Physicochemical characterizations and density functional theory (DFT) calculations confirmed that FeOOH crystals diminished with a pulse potential of 1000 cycles (cls) in non-Faradaic region (?0.8～0 V) and transformed into more stable CoFeLDH nanosheet arrays in Fe-rich system. The above transformation effectively reduced H¹ adsorption energy to accelerate water decomposition for efficient hydrogen evolution reaction. This was because pulse-activation accelerated electron transfer from Co²⁺ to Fe^(3+δ)+ through intermittent input negative potential, reducing the high oxidation state of Fe^(3+δ)+ in FeOOH to generate more stable CoFeLDH. The optimized pulse-activation with CoFeLDH electrocatalyst after 1000 cls decreased the overpotential of alkaline hydrogen evolution by 36%, from 225 mV to 144 mV at ?10 mA cm^?2.     

Carbon supported nickel phosphide as efficient electrocatalyst for hydrogen and oxygen evolution reactions

Hydrogen production through water splitting is an efficient and green technology for fulfilling future energy demands. Carbon nanotubes (CNT) supported Ni₂P has been synthesized through a simpler hydrothermal method. Ni₂P/CNT has been employed as efficient electrocatalysts for hydrogen and oxygen evolution reactions in acidic and alkaline media respectively. The electrocatalyst has exhibited low overpotential of 137 and 360 mV for hydrogen and oxygen evolution reactions respectively at 10 mA cm^?2. Lower Tafel slopes, improved electrochemical active surface area, enhanced stability have also been observed. Advantages of carbon support in terms of activity and stability have been described by comparing with unsupported electrocatalyst.     

MOF-derived cobalt manganese phosphide as highly efficient electrocatalysts for hydrogen evolution reaction

Hydrogen is considered as a viable alternative to traditional fossil fuels. Hydrogen evolution reaction (HER) by electrochemical water splitting is the most reliable and effective way for the sustainable production of pure hydrogen. The design and synthesis of highly active and stable non-noble-metal-based electrocatalysts is the core of the large-scale application of this technology. Herein, peony petal-like CoMnP/NF nanomaterials growing on nickel foam (NF) are prepared via facile hydrothermal and phosphorization methods. The results showed that CoMnP/NF had excellent HER activity in acidic and alkaline media. In 0.5 M H₂SO₄, CoMnP/NF only needed 66.6 mV overpotential to drive the current density of 10 mA cm^?2, with a Tafel slope of 38.8 mV dec^?1. In addition, a particularly low overpotential of 53.9 mV and Tafel slope of 63 mV dec^?1 are required to achieve the same current density in the 1 M KOH electrolyte. Meanwhile, the electrocatalyst showed good stability after 1000 cyclic voltammetry tests and 12 h I-T tests. In the 1 M KOH electrolyte, the current density of 10 mA cm^?2 achieved with only 1.70 V battery voltage, and the electrocatalyst showed excellent stability. The performance of CoMnP/NF can be attributed to the synergistic effect between Co and Mn atoms and the high electrochemical surface area (ECSA). This study provides a valuable strategy for the synthesis of non-precious metals and high-performance catalytic materials.     

MOF-derived NiSe2 nanoparticles grown on carbon fiber as a binder-free and efficient catalyst for hydrogen evolution reaction

It is challenging to grow inexpensive cathode material with superior catalytic properties for hydrogen evolution reaction (HER). Metal-organic frameworks (MOFs) have emerged as powerful platforms to synthesize efficient and ultrastable catalysts for hydrogen production. In this research, NiSe₂ nanoparticles were derived from Ni-based MOF, which grown in situ on carbon fiber (NiSe₂/C/CF) through pyrolysis and selenization processes. NiSe₂/C/CF displays a higher HER performance than that of Ni/C/CF and Ni-MOF-74/CF. Notably, the NiSe₂/C/CF electrode gives a low overpotential of 209 mV, a Tafel slope of 74.1 mV/dec, and outstanding stability with slight decay after operating for 12 h. The high HER catalytic activity of NiSe₂/C/CF is mainly ascribed to the emerging effects of NiSe₂ nanoparticles and three-dimensional conductive substrate CF, facilitating active moieties exposure and electron transfer during the electrocatalytic process. Therefore, this work illustrates a novel approach for the preparation of transition metal chalcogenides as low-cost and stable catalysts for HER.     

Surfactant-assisted hydrothermal synthesis of nitrogen doped Mo2C@C composites as highly efficient electrocatalysts for hydrogen evolution reaction

We describe a facile surfactant-assisted hydrothermal route to synthesize nitrogen doped Mo₂C@C composites in the presence of cetyltrimethylammonium bromide (CTAB) as carbon source and structure guiding agent. The resulting Mo₂C@C composites consist of Mo₂C nanocrystals with sheet-like morphology and well-dispersed nitrogen element doping. Controllable experiments indicate that the additive amount of CTAB can efficiently tune porous structure and electrochemical activity of the as-prepared Mo₂C@C materials. This unique nitrogen doped Mo₂C@C composite provides several advantages for electrocatalytic applications: (1) nitrogen doped carbons can prevent the aggregation of Mo₂C nanocrystals and render it high conductivity; (2) the homogeneous dispersion of Mo₂C nanocrystals provides abundant active sites; (3) 2D morphology, the hierarchical porosity, and high surface areas allow large exposed field of active sites and facilitate mass transfer. As a result, the nitrogen doped Mo₂C@C composites deliver superior HER electrocatalytic activities with a low overpotential of only 100 mV and also a low Tafel slope of 53 mV/dec in alkaline condition. Such CTAB-assisted strategy may open up an opportunity towards synthesis of low cost and high performance Mo-based electrocatalysts for various applications, such as water splitting.     

Hollow ZnxCo1-xSe2 microcubes derived from Metal–Organic framework as efficient bifunctional electrocatalysts for hydrogen evolution and oxygen evolution reactions

Herein, we designed a simple and universal method to prepare cobalt-based bimetallic Zn_xCo_1-x-MOFs precursors, which were used as templates to synthesize effective bifunctional electrocatalyst hollow porous Zn_xCo_1-xSe₂ microcubes by one-step hydrothermal method. The cubic morphology of the Zn_xCo_1-x-MOFs precursors was well inherited. Particularly, the Zn_0.1Co_0.9Se₂ exhibited superior HER and OER performance in acidic solution and alkaline solution, respectively. Benefiting from the hollow porous structure, the synergistic effect of Zn–Co–Se and the incorporation of a small number of zinc atoms.

1. Download : Download high-res image (316KB)
2. Download : Download full-size image

     

Preparation and characterization of active and cost-effective nickel/platinum electrocatalysts for hydrogen evolution electrocatalysis

Designing active and cost-effective electrocatalysts is important in the field of energy economics, particularly for hydrogen production, which is at the core of many energy conversion technologies. This investigation reports on the preparation of nickel-based materials targeting electrocatalytic hydrogen evolution in either alkali or physiological solutions. Nickel-based metallic nanoparticles were synthesized via the bromide anion exchange method, and their performance was compared with the performances of a homemade nickel mesh and a high-purity nickel foil. The Ni₉₉Pt₀₁/C electrocatalyst performed the best in terms of overpotential and generated current density, notably in physiological conditions. In addition, the homemade electroformed nickel mesh behaved as well as a commercial high-purity nickel foil in alkaline medium and even better in buffered solution at pH 7. Both materials are environmentally friendly and economically viable candidates for technologies that require large cathode materials, especially when hydrogen production in neutral electrolytes is sought.     

Ga doped Ni3S2 ultrathin nanosheet arrays supported on Ti3C2-MXene/Ni foam: An efficient and stable 3D electrocatalyst for oxygen evolution reaction

Exploring cost-efficient electrocatalysts for oxygen evolution reaction (OER) is still a huge challenge in the electrochemical energy conversion technology. In this work, Gallium (Ga)-doped Ni₃S₂ nanosheet arrays grown on Ti₃C₂-MXene/nickel foam (Ga–Ni₃S₂/Ti₃C₂/NF) have been synthesized by a successive hydrothermal and sulfidization process. The Ga doping modulates the electronic structure of Ni₃S₂, so tuning the adsorption energies of oxygen intermediate (1OOH). The Ga–Ni₃S₂/Ti₃C₂/NF delivers outstanding catalytic activities toward OER with an overpotential of 340 mV at 100 mA cm^?2, and exhibits superior electrochemical durability. The excellent OER performance of Ga–Ni₃S₂/Ti₃C₂/NF can be ascribed to the 3D sheet arrays morphology and optimized electronic structure. Density functional theory (DFT) calculations also demonstrate that electronic disturbance attributed to Ga doping effectively improves the activity of Ni sites, leading to stronger binding strength of 1OOH intermediate at Ni sites nearby Ga. This study provides insights into the fabrication of advanced electrocatalysts for application.     

Amorphous CoFeB on nickel foam as a high efficient electrocatalyst for hydrogen evolution reaction

The development of high-performance, low cost and earth abundant catalysts for hydrogen evolution reaction (HER) is desired. This work presents amorphous CoFeB supported on nickel foam (NF), prepared by a facial chemical reduction method, as an active catalyst for HER in alkaline solution. Structure characterization indicated that with the incorporation of Fe atom, CoFeB catalysts exhibit similar petal-like granular morphology as CoB. The optimal CoFeB/NF-0.15 catalyst exhibits Brunauer-Emmett-Teller (BET) surface area of 27.4 m² g^?1, nearly two times larger than 13.2 m² g^?1 for CoB, suggesting higher specific surface area. CoFeB/NF-0.15 catalyst shows excellent HER performance and reaches ?10 mA cm^?2 at overpotential of 35 mV in alkaline solution, and Tafel slope of 84.7 mV dec^?1, indicative of Volmer-Heyrovsky reaction mechanism. The synergistic effect among Fe, Co and B atoms and the more exposed active sites as well as faster electron transfer kinetics collectively contributed to the improved intrinsic activity of CoFeB for HER. Moreover, CoFeB/NF-0.15 exhibits good stability for over 16 h.     

Cobalt doping VS2 on nickel foam as a high efficient electrocatalyst for hydrogen evolution reaction

The development of non-precious metal catalysts with abundant reserves, low prices and good performance for HER is desired. In this work, rodlike Co doping VS₂ arrays on nickel foam (NF) (Co-VS₂/NF) were fabricated by a simple one-step solvothermal method. Structure characterization indicated that Co doping reduced the size of rodlike Co-VS₂ and meanwhile can modulate its electronic structure, which is beneficial for the enhancement of HER performance. The optimal Co-VS₂/NF-2 reveals a low overpotential of 164.5 mV at ?10 mA cm^?2, small Tafel slope of 52.2 mV dec^?1 and excellent long-term stability after 2000 cycles in 1 M KOH.     

WS2/NiSx heterojunction nanosheet clusters: A highly efficient electrocatalyst for hydrogen evolution reaction

The development of highly active and stable electrocatalysts is essential to solve energy and environmental problems and realize sustainable social and economic development. Herein, we synthesized a bimetallic sulfide material by a kinetically controlled low-temperature solid-phase reaction. The bimetallic sulfide improves the conductivity of the electrocatalysts by optimized electronic structure, and the coupling effect at the heterogeneous interface of WS₂ and NiS_x increases the charge density on the S site at W–S–Ni, making it easier for the electrocatalysts to trap the active material in solution. In addition, nanosheet clusters expose abundant catalytic sites, which together improve hydrogen evolution reaction (HER) for catalytic activity. Optimized WS₂/NiS_x composite show near-precious metal catalyst activity with an overpotential at 10 mA cm^?2 of only 72 mV in alkaline media, which exhibits excellent catalytic stability and outperforms most non-precious metal electrocatalysts.