Rapeseed meal-based autochthonous N and S-doped non-metallic porous carbon electrode material for oxygen reduction reaction catalysis

The heteroatom-doped porous carbon material as an alternative to commercial Pt/C catalysts in oxygen reduction reaction has attracted extensive attention. In this study, the rapeseed meal-based material (ARM-900) prepared by carbonization with high temperature and activation with ZnCl₂ had a porous structure and was doped with N and S heteroatoms. Compared to commercial Pt/C catalysts (onset potential of 0.95 V vs. RHE and limiting diffusion current of ?5.7 mA cm^?2), ARM-900 demonstrated excellent electrocatalytic performance with an onset potential of 0.98 V vs. RHE and limiting diffusion current of ?8.1 mA cm^?2 in O₂ saturated 0.1 M KOH solution. Meanwhile, ARM-900 had higher durability and more superior methanol tolerance than Pt/C catalyst. The excellent ORR performance of ARM-900 was derived from the formation of abundant pore structure and the doping of the autochthonous N and S heteroatoms. MFCs with ARM-900 as the cathode had the maximum power density of 808 mW/m², which was obviously better than Pt/C (709 mW/m²). This study provided an environment-friendly and effective strategy for the reuse of rapeseed meal and the preparation of N and S-doped non-metallic ORR catalysts.     

In-situ facile synthesis of heterostructural Co||MnCo2O4.5/NC with active oxygen vacancies and its bifunctional electrocatalysis for oxygen reduction and oxygen evolution reaction

A potential non-noble metal oxide catalyst with its low-cost and efficient catalytic ability attract increasing attention. In this paper, a highly efficient bifunctional electrocatalyst Co||MnCo₂O_4.5/NC with heterostructure and oxygen vacancies is prepared utilizing solid reaction in-situ. The optimal catalyst is obtained at 650 °C with the mass ratio (1:8) of MnCo₂O_4.5 and Dicyandiamide (DCD). It shows excellent electrocatalytic activity for oxygen reduction reaction (ORR) with high half-wave potential (0.81 V) and limit current density (6.22 mA cm^?2), which is better than that of the commercial 20% Pt/C(0.81 V, 5.52 mA cm^?2). At the same time, it also exhibits superior electrocatalytic activity for oxygen evolution reaction (OER) with low overpotential (330 mV) and a faster dynamics process. The superior electrocatalytic properties may be resulted from the presence of heterostructure and increasing ratio of oxygen vacancies, which helps to the rapid transfer of electrons and creates more active sites. Moreover, the self-generated N-doped carbon provides high conductivity of the as-prepared Co||MnCo₂O_4.5/NC composite. It can be seen that the application of interface engineering technologies is useful for improving the performance of the catalyst, providing an effective and facile synthesis strategy for non-noble metal catalyst.     

Transition metal carbides coupled with nitrogen-doped carbon as efficient and stable Bi-functional catalysts for oxygen reduction reaction and hydrogen evolution reaction

Developing non-precious metal catalysts for oxygen reduction reaction (ORR) and hydrogen evolution reaction (HER) is crucial for proton exchange membrane fuel cell (PEMFC), metal-air batteries and water splitting. Here, we report a in-situ simple approach to synthesize ultra-small sized transition metal carbides (TMCs) nanoparticles coupled with nitrogen-doped carbon hybrids (TMCs/NC, including WC/NC, V₈C₇/NC and Mo₂C/NC). The TMCs/NC exhibit excellent ORR and HER performances in acidic electrolyte as bi-functional catalysts. The potential of WC/NC at the current density of 3.0 mA cm^?2 for ORR is 0.814 V (vs. reversible hydrogen electrode (RHE)), which is very close to Pt/C (0.827 V), making it one of the best TMCs based ORR catalysts in acidic electrolyte. Besides, the TMCs/NC exhibit excellent performances toward HER, the Mo₂C/NC only need an overpotential of 80 mV to drive the current density of 10 mA cm^?2, which is very close to Pt/C (37 mV), making it the competitive alternative candidate among the reported non-precious metal HER catalysts.     

Spinel oxides wrapped on electrospun carbon nanofibers: Superior electrocatalysts boosted by enhanced conductivity and rich oxygen vacancies

Spinel oxides have been considered as promising precious metal-free catalysts for oxygen reduction reaction (ORR). However, the poor intrinsic conductivity and moderate electrocatalytic performance hinder their practical applications. Hence, various strategies have been explored and reported in addressing the issues. Herein, an elaborate approach for enhancing the ORR performance of spinel NiCo₂O₄ is proposed, by combining the decoration of NiCo₂O₄ nanoparticles on electrospun carbon nanofibers and defect engineering with rich oxygen vacancies on NiCo₂O₄ nanoparticles through a facilely controlling on calcination circumstance, which could not only increase more active sites and improve the intrinsic catalytic activity, but also render an excellent stability for long-term operation. Thus, the as-prepared hybrid exhibits significantly improved ORR electrocatalytic performance, including a high limited current density of −5.8 mA cm⁻², a positively shifting of the onset potential at 0.88 V and half-wave potential at 0.76 V (vs. RHE). The performance of rechargeable Zn-air battery based on the as-prepared catalyst surpasses the one based on Pt/C catalyst significantly. This work can be also applied to other metal oxides based electrocatalysts, and then provided an avenue for the realization of metal-air batteries and fuel cells with high efficient and cost-effective.     

Morphological influence of graphitic carbon nanofibers by N–F dual-doping on Pt electrocatalytic activity and stability for oxygen reduction reaction in polymer electrolyte membrane fuel cells

Morphology of carbon nanofibers significantly effects Pt nanoparticles dispersion and specific interaction with the support, which is an important aspect in the fuel cell performance of the electrocatalysts. This study emphasizes, the defects creation and structural evolution comprised due to N–F co-doping on graphitic carbon nanofibers (GNFs) of different morphologies, viz. GNF-linearly aligned platelets (L), antlers (A), herringbone (H), and their specific interaction with Pt nanoparticle in enhancing the oxygen reduction reaction (ORR). GNFs–NF–Pt catalysts exhibit better ORR electrocatalytic activity, superior durability that is solely ascribed to the morphological evolution and the doped N–F heteroatoms, prompting the charge density variations in the resultant carbon fiber matrices. Amongst, H–NF–Pt catalyst performed outstanding ORR activity with exceptional electrochemical stability, which shows only 20 mV loss in the half-wave potential whilst 100 mV loss for Pt/C catalyst on 20,000 potential cycling. The PEMFC comprising H–NF–Pt as cathode catalyst with minimum loading of 0.10 mg cm^?2, delivers power density of 0.942 W cm^?2 at current density of 2.50 A cm^?2 without backpressures in H₂–O₂ feeds. The H–NF–Pt catalyst owing to its hierarchical architectures, performs well in PEMFC at the minimized catalyst loading with outstanding stability that can significantly decrease total price for the fuel cell.     

Introduction of a new active and stable cathode catalyst based on bimetal-organic frameworks/PPy-sheet for alkaline direct ethanol fuel cell

For the first time, the polypyrrole (PPy) with a sheet-like structure was synthesized by a high-efficiency and facile chemical reaction process. A new composite with the growth of bimetallic zeolitic imidazolate frameworks on polypyrrole sheet-like (BMZIF@PPy) was synthesized. Then, the BMZIF@PPy composite by different heat-treatment temperatures is applied to make oxygen reduction reaction (ORR) electrocatalysts. Electrochemical measurements perform to investigate the ORR properties in both acidic and alkaline media. The onset potential and the limiting current density for the Cobalt/Zinc-nanocarbon@polypyrrole pyrolysis at 800 °C (Co/Zn-NC@PPy-800) were 0.977 V_RHE and 4.99 mA cm^?2 in 0.1 M KOH and 0.85V_RHE and 5.48 mA cm^?2 in 0.5 M H₂SO₄. Finally, due to the good activity and stability in alkaline media, the Co/Zn-NC@PPy-800 electrocatalyst is used as the cathode in an alkaline direct ethanol fuel cell. The maximum power of the Co/Zn-NC@PPy-800 cathode catalyst was 77% higher than that of the commercial Pt/C electrocatalyst.     

Ni-doped Mn2O3 microspheres as highly efficient electrocatalyst for oxygen reduction reaction and Zn-air battery

Herein, Ni-doped Mn₂O₃ microspheres are successfully synthesized via the facile coprecipitation of metal ions and ammonium bicarbonates, followed by a heat treatment process. Ni-doped Mn₂O₃ exhibits outstanding catalytic performance toward the oxygen reduction reaction (ORR) in alkaline media with a half-wave potential of 0.801 V, limiting current density of 6.02 mA cm^?2 at 0.6 V vs. RHE, outstanding long-term durability, and strong tolerance to methanol. Furthermore, a Zn–air primary battery using Ni-doped Mn₂O₃ as an air cathode shows high open-circuit voltage of 1.52 V and high power density of 88.2 mW cm^?2, outperforming the commercial Pt/C cathode. The exceptional performance of the Ni-doped Mn₂O₃ microspheres is ascribed to the hierarchical structure, optimized particle size, and Ni incorporation into Mn₂O₃. The proposed synthesis strategy provides a new methodology for the design and fabrication of electrochemically active transition metal-doped materials as efficient electrocatalysts for a variety of energy storage and conversion reactions.     

Lattice-strained Pt nanoparticles anchored on petroleum vacuum residue derived N-doped porous carbon as highly active and durable cathode catalysts for PEMFCs

High cost and poor durability of Pt-based cathode catalysts for oxygen reduction reaction (ORR) severely hamper the popularization of proton exchange membrane fuel cells (PEMFCs). Tailoring carbon support is one of effective strategies for improving the performance of Pt-based catalysts. Herein, petroleum vacuum residue was used as carbon source, and nitrogen-doped porous carbon (N-PPC) was synthesized using a simple template-assisted and secondary calcination method. Small Pt nanoparticles (Pt NPs) with an average particles size of 1.8 nm were in-situ prepared and spread evenly on the N-PPC. Interestingly, the lattice compression (1.08%) of Pt NPs on the N-PPC (Pt/N-PPC) was clearly observed by aberration-corrected high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM), which was also verified by the shift of (111) crystal plane of Pt on N-PPC to higher angles. The X-ray photoelectron spectroscopy (XPS) results suggest that the N-PPC support had a strong effect on anchoring Pt NPs and endowing surface Pt NPs with lowered d band center. Thus, the Pt/N-PPC as a catalyst simultaneously boosted the ORR activity and durability. The specific activity (SA) and mass activity (MA) of the Pt/N-PPC at 0.9 V reached 0.83 mA cm⁻² and 0.37 A mg_Pt⁻¹, respectively, much higher than those of the commercial Pt/C (0.21 mA cm⁻² and 0.11 A mg_Pt⁻¹) in 0.1 M HClO₄. The half-wave potential (E_1/2) of Pt/N-PPC exhibited only a minimal negative shift of 7 mV after 30,000 accelerated durability tests (ADT) cycles. More importantly, an H₂–O₂ fuel cell with a Pt/N-PPC cathode achieved a power density of 866 mW cm⁻², demonstrating that the prepared catalyst has a promising application potential in working environment of PEMFCs.     

Boron doping induced electronic reconfiguration of Fe-Nx sites in N-doped carbon matrix for efficient oxygen reduction reaction in both alkaline and acidic media

Developing non-precious metal-based catalysts as the substitution of precious catalysts (Pt/C) in oxygen reduction reaction (ORR) is crucial for energy devices. Herein, a template and organic solvent-free method was adopted to synthesize Fe, B, and N doped nanoflake-like carbon materials (Fe/B/N–C) by pyrolysis of monoclinic ZIF-8 coated with iron precursors and boric acid. Benefiting from introducing B into Fe–N–C, the regulated electron cloud density of Fe-N_x sites enhance the charge transfer and promotes the ORR process. The as-synthesized Fe/B/N–C electrocatalyst shows excellent ORR activity of a half-wave potential (0.90 V vs 0.87 V of Pt/C), together with superior long-term stability (95.5% current density retention after 27 h) in alkaline media and is even comparable to the commercial Pt/C catalyst (with a half-wave potential of 0.74 V vs 0.82 V of Pt/C) in an acidic electrolyte. A Zn-air battery assembled with Fe/B/N–C as ORR catalyst delivers a higher open-circuit potential (1.47 V), specific capacity (759.9 mA h g^?1_Zn at 10 mA cm^?2), peak power density (62 mW cm^?2), as well as excellent durability (5 mA cm^?2 for more than 160 h) compared to those with commercial Pt/C. This work provides an effective strategy to construct B doped Fe–N–C materials as nonprecious ORR catalyst. Theoretical calculations indicate that introduction of B could induce Fe-N_x species electronic configuration and is favorable for activation of OH1 intermediates to promote ORR process.     

Spatially confined growth of ultrathin NiFe layered double hydroxide nanosheets within carbon nanofibers network for highly efficient water oxidation

The rational design of catalysts with low cost, high efficient and robust stability toward oxygen evolution reaction (OER) is greatly desired but remains a formidable challenge. In this work, a one-pot, spatially confined strategy was reported to fabricate ultrathin NiFe layered double hydroxide (NiFe-LDH) nanosheets interconnected by ultrafine, strong carbon nanofibers (CNFs) network. The as-fabricated NiFe-LDH/CNFs catalyst exhibits enhanced OER catalytic activity in terms of low overpotential of 230 mV to obtain an OER current density of 10 mA cm^?2 and very small Tafel slope of 34 mV dec^?1, outperforming pure NiFe-LDH nanosheets assembly, commercial RuO₂, and most non-noble metal catalysts ever reported. It also delivers an excellent structural and electrocatalytic stability upon the long-term OER operation at a large current of 30 mA cm^?2 for 40 h. Furthermore, the cell assembled by using NiFe-LDH/CNFs and commercial Pt/C as anode (+) and cathode (?) ((+)NiFe-LDH/CNFs||Pt/C(?)) only requires a potential of 1.50 V to deliver the water splitting current of 10 mA cm^?2, 130 mV lower than that of (+)RuO₂||Pt/C(?) couple, demonstrating great potential for applications in cost-efficient water splitting devices.     

PtCo incorporated porous carbon nanofiber as a promising oxygen reduction electrocatalyst

Designing oxygen reduction reaction (ORR) catalysts with high activity and long durability is significant for the development of proton exchange membrane fuel cells. Herein, the optimized platinum nanowires are used as templates for inducing growth of cobalt-containing metal-organic framework, deriving uniform nanofibers. After the calcination, the metal ions are transferred into the nitrogen-rich porous carbon, and wrapped by the carbon skeleton to form the PtCo bimetal incorporated nanofibers as high-performance ORR electrocatalyst. The Pt₄Co@NC-900 catalyst yields high specific activity (1.37 mA cm⁻²) in comparison to Pt/C (0.38 mA cm⁻²). The mass activity (MA) of Pt₄Co@NC-900 catalyst is approximately 3.8-fold higher than that of the commercial Pt/C under acidic conditions. After the accelerated durability tests, the Pt₄Co@NC-900 catalyst presents only 16% loss in MA, while Pt/C catalyst retains 73.0% of the initial MA. The improved ORR performance can be ascribed to the synergistic interaction between Co and Pt.     

A highly active composite electrocatalyst Ni–Fe–P–Nb2O5/NF for overall water splitting

This work demonstrates a facile Nb₂O₅-decorated electrocatalyst to prepare cost-effective Ni–Fe–P–Nb₂O₅/NF and compared HER & OER performance in alkaline media. The prepared electrocatalyst presented an outstanding electrocatalytic performance towards hydrogen evolution reaction, which required a quite low overpotential of 39.05 mV at the current density of ?10 mA cm^?2 in 1 M KOH electrolyte. Moreover, the Ni–Fe–P–Nb₂O₅/NF catalyst also has excellent oxygen evolution efficiency, which needs only 322 mV to reach the current density of 50 mA cm^?2. Furthermore, its electrocatalytic performance towards overall water splitting worked as both cathode and anode achieved a quite low potential of 1.56 V (10 mA cm^?2).     

Iron and cobalt containing electrospun carbon nanofibre-based cathode catalysts for anion exchange membrane fuel cell

The use of Pt-based cathode catalyst materials hinders the widespread application of anion exchange membrane fuel cells (AEMFCs). Herein, we present a non-precious metal catalyst (NPMC) material based on pyrolysed Fe and Co co-doped electrospun carbon nanofibres (CNFs). The prepared materials are studied as oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) catalysts in alkaline and acidic environments. High activity towards the ORR in alkaline solution indicated the suitability of the prepared NPMCs for the application at the AEMFC cathode. In the AEMFC test, the membrane-electrode assembly bearing a cathode with the nanofibre-based catalyst prepared with the ionic liquid (IL) (Fe/Co/IL–CNF–800b) showed the maximum power density (P_max) of 195 mW cm⁻², which is 78% of the P_max obtained with a commercial Pt/C cathode catalyst. Such high ORR electrocatalytic activity was attributed to the unique CNF structure, high micro-mesoporosity, different nature of nitrogen species and metal-N_x active centres.     

Spinel-type NiCo2O4 with abundant oxygen vacancies as a high-performance catalyst for the oxygen reduction reaction

Spinel-type nickel cobaltite with numerous oxygen vacancies is successfully synthesized by hydrothermal and thermal reduction using hydrogen. The effects of oxygen vacancies on the electrochemical activity and stability for the oxygen reduction reaction are investigated. The prepared catalyst displays significantly enhanced oxygen reduction reaction (ORR) catalytic performance under alkaline conditions, which is comparable to that of commercial Pt/C. The oxygen-deficient NiCo₂O₄ exhibits a very high limiting current density of −5.44 mA cm⁻² with onset and half-wave potentials of 0.93 and 0.78 V versus the reversible hydrogen electrode (RHE), respectively. Additionally, it shows excellent durability and resistance to methanol. The enhanced ORR activity and stability of the catalyst can be ascribed to the synergistic effects of the relatively large electrochemical surface area, more exposed active sites, and good electrical conductivity derived from abundant oxygen vacancies.     

Molecule-confined modification of graphitic C3N4 to design mesopore-dominated Fe-N-C hybrid electrocatalyst for oxygen reduction reaction

To design inexpensive carbon catalysts and enhance their oxygen reduction reaction (ORR) activity is critical for developing efficient energy-conversion systems. In this work, a novel Fe-N-C hybrid electrocatalyst with carbon nanolayers-encapsulated Fe₃O₄ nanoparticles is synthesized successfully by utilizing the molecular-level confinement of graphitic C₃N₄ structures via hemin biomaterial. Benefiting from the Fe-N structure prevalent on the carbon nanosheets and large mesopore-dominated specific surface area, the synthesized catalyst under optimized conditions shows excellent electrocatalytic performance for ORR with an E_ORR at 1.08 V versus reversible hydrogen electrode (RHE) and an E_1/2 at 0.87 V vs. RHE, and outstanding long-term stability, which is superior to commercial Pt/C catalysts (E_ORR at 1.04 V versus RHE and E_1/2 at 0.84 V versus RHE). Moreover, the low hydrogen peroxide yield (<11%) and average electron transfer number (~3.8) indicate a four-electron ORR pathway. Besides, the maximum power density of the home-made Zn-air battery using the obtained catalyst is 97.6 mW cm⁻². This work provides a practical route for the synthesis of cheap and efficient ORR electrocatalysts in metal-air battery systems.     

Bimetallic zeolitic imidazole framework derived Co@NC materials as oxygen reduction reaction catalysts application for microbial fuel cells

Microbial fuel cells (MFCs), a promising future energy conversion technology, play a significant role in the area of sustainable and renewable energy. In air-cathode MFCs, the catalytic activity for oxygen reduction reaction (ORR) of cathode electrocatalyst is the key factor to the performance of MFCs. Development of efficient and economical ORR electrocatalysts is an important step for the wide application of MFCs. Herein, Co wrapped carbon nanotubes (CNTs) N-doped nanoporous carbon materials (Co@NC-Co_xZn_y) are constructed via a facile zinc-assisted growth pyrolytic approach of bimetallic zeolitic imidazole frameworks (BMZIFs)-derived strategy. They are directly prepared via carbonization of the precursor Co_xZn_y-BMZIFs. During the pyrolysis process, the evaporation of zinc plays critical role in the in-situ growth of CNTs. For instance, the optimal catalyst, Co@NC-Co₁Zn₃, exhibits excellent ORR performance activity and stability with on-set potential (E_on-set) of 0.830 V (vs. RHE) and diffusion-limited current density (j_L) of 6.706 mA cm^?2, which is superior to the benchmark catalyst of commercial 20 wt% Pt/C. Additionally, Co@NC-Co₁Zn₃ displays four-electron pathway, long-term stability and better resistance to methanol tolerance. The MFC with Co@NC-Co₁Zn₃ cathode shows a maximum power density of 1039 mW m^?2, and outperforms the MFC with commercial 20 wt% Pt/C catalyst (678 mW m^?2). This work paved the way for exploring cost-effective, superior performance non-precious metal-based catalysts for air-cathode MFCs.     

Polyoxomolybdate anchored graphite oxide: Noble metal-free electrocatalyst for oxygen reduction reaction

We present the synthesis of a noble metal-free electrocatalyst, polyoxomolybdate/reduced graphite oxide (PMA/rGO) composite, which showed enhancement in the kinetics for oxygen reduction reaction (ORR). The composite material was prepared by simple and cost effective method. Mere heating of the precursors at low temperature (200 °C) resulted in molecular assembly of PMA on GO in the form of clusters which behaved as active centers for efficient ORR. The electrochemical study of PMA/rGO-2 (PMA to GO weight ratio of 1:2) catalyst carried out by rotating disk electrode (RDE) method, showed considerable electrocatalytic activity with E_onset of 1.0 V vs. RHE and current density of 4.0 mA/cm² at 1600 rpm in alkaline condition. Additionally, as-prepared PMA/rGO-2 catalyst showed a single step ~ 4 electron transfer pathway similar to commercial Pt/C catalyst; confirmed through rotating ring disk electrode (RRDE) study. Interestingly, PMA/rGO-2 electrocatalyst exhibited substantially higher stability than Pt/C catalyst even after 20K potential cycles (though the current density of former catalyst is inferior to later). Further, in a methanol cross-over test, PMA/rGO-2 was found to be inactive towards methanol oxidation reactions, which could nullify the issues due to the fuel cross-over effect, if employed as cathode in direct methanol fuel cells. The enhanced ORR activity and significant stability is attributable to the anchoring and homogenous distribution of polyoxomolybdate clusters on graphite oxide.     

Amino functionalized carbon nanotubes supported CoNi@CoO–NiO core/shell nanoparticles as highly efficient bifunctional catalyst for rechargeable Zn-air batteries

Oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) are the core reaction processes of rechargeable Zn-air battery (ZAB) cathode. Therefore, exploring a bifunctional catalyst with excellent electrochemical performance, high durability, and low cost is essential for rechargeable ZAB. In this work, amino functionalized carbon nanotubes supported core/shell nanoparticles composed of CoNi alloy core and CoO–NiO shell (CoNi@CoO–NiO/NH₂-CNTs-1) is synthesized through a simple and efficient hydrothermal reaction and calcination method, which shows higher ORR/OER bifunctional catalytic performance than the single metal-based catalyst, such as Ni@NiO/NH₂-CNTs and Co@CoO/NH₂-CNTs. The fabricated bimetallic alloy based catalyst CoNi@CoO–NiO/NH₂-CNTs-3 with the optimized loading content of CoNi@CoO–NiO core/shell nanoparticles, presents the best bifunctional catalytic performance for ORR/OER. Experimental studies reveal that CoNi@CoO–NiO/NH₂-CNTs-3 exhibits the onset potential of 0.956 V and 1.423 V vs. RHE for ORR and OER, respectively. It also exhibits a low overpotential of 377 mV to achieve a 10 mA cm^?2 current density for OER, and positive half-wave potentials of 0.794 V for ORR. And the potential difference between half-wave potential of ORR (E_1/2) and the potential at 10 mA cm^?2 for OER (E_j10) is 0.813 V. In addition, when CoNi@CoO–NiO/NH₂-CNTs-3 is used as an air electrode catalyst of rechargeable ZAB, its maximum power density and open circuit voltage (OCV) can reach 128.7 mW cm^?2 and 1.458 V (The commercially available catalyst of Pt/C–RuO₂ is 88.1 mW cm^?2), which strongly demonstrates that the fabricated catalyst CoNi@CoO–NiO/NH₂-CNTs-3 can be used as a highly efficient bifunctional catalyst for ZABs, and is expected to replace those expensive precious metal electrocatalysts to meet the growing demand for new energy devices.     

Highly efficient PtCo nanoparticles on Co–N–C nanorods with hierarchical pore structure for oxygen reduction reaction

Developing platinum-based nanoparticles on carbon catalysts with high activity and stability for oxygen reduction reaction (ORR) is of great significance for the practical application of fuel cells. Herein, a synchronous strategy of preparing nano-sized PtCo supported on atomic Co and N co-doped carbon nanorods (PtCo/Co–N–C NR) was developed to replace the conventional method of impregnating Pt sources into ready-made carbon materials, in which metal-organic frameworks (MOFs) with Co and Zn ions of rhombic dodecahedron were first prepared using 2-methylimidazole as building block and then their morphology was transformed into porous nanorods via the reduction of Co ions to Co–B–O complex in the MOFs by NaBH₄; subsequently, Pt was deposited on the Co–Zn MOF nanorods through the displacement reaction of PtCl₆^2- and metallic Co and coordination between MOF and PtCl₆^2-; after pyrolysis and acid-leaching process, highly dispersed PtCo/Co–N–C NR was obtained. Attributed to its unique characteristics of hierarchical pore structure, uniform PtCo alloy nanoparticles with the average size of 7.0 nm and strong supporting interaction effect, the catalyst exhibits high ORR activity and stability with the mass activity of 577.0 mA mg^?1_Pt and specific activity of 1.4 mA cm^?2 at 0.9 V vs RHE in 0.1 M HClO₄, which is about 3.6 times and 3.5 times high than that of commercial Pt/C catalyst respectively. This strategy would provide a flexible route to develop highly active and stable ORR electrocatalysts with various morphologies for optimizing the exposure of active sites.     

MOF-derived multi-metal embedded N-doped carbon sheets rich in CNTs as efficient bifunctional oxygen electrocatalysts for rechargeable ZABs

The rational design and preparation of bifunctional electrocatalysts with pleasant oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) performance is crucial for extensive commercial applications of rechargeable Zn–air batteries (ZABs). Herein, we report a simple method to obtain multi-metal (Fe, Ni, Zn) embedded in N-doped carbon sheets entangled with carbon nanotubes (CNTs) as superior oxygen electrocatalysts (FeNi-NCS-2). The resultant FeNi-NCS-2 exhibits an impressive electrochemical performance, providing a reversible oxygen overpotential as low as 0.758 V. The ZAB with FeNi-NCS-2 as the air cathode shows a promising capacity of 639.71 mAh g^?1 at 20 mA cm^?2, a power density of 109.8 mW cm^?2 and cycling stability of over 130 cycles at 10 mA cm^?2 with an energy efficiency of about 55%, superior to the ZAB based on Pt/C–IrO₂. The satisfactory electrocatalytic performance is mainly due to the Fe, Ni-based nanoparticles protected by graphitic carbon layers, hierarchical porous lamellar structures that promote the accessibility between the active centers and the electrolyte as well as self-growing tangled carbon nanotubes that provide fast transmission channels. This study presents a facile way for the synthesis of highly efficient ORR/OER bifunctional electrocatalysts for high-performance rechargeable ZABs.