A review on reforming bio-ethanol for hydrogen production

Bio-ethanol is a prosperous renewable energy carrier mainly produced from biomass fermentation. Reforming of bio-ethanol provides a promising method for hydrogen production from renewable resources. Besides operating conditions, the use of catalysts plays a crucial role in hydrogen production through ethanol reforming. Rh and Ni are so far the best and the most commonly used catalysts for ethanol steam reforming towards hydrogen production. The selection of proper support for catalyst and the methods of catalyst preparation significantly affect the activity of catalysts. In terms of hydrogen production and long-term stability, MgO, ZnO, _CeO2${\mathrm{CeO}}_2$, and _La2O3${\mathrm{La}}_2{\mathrm{O}}_3$ are suitable supports for Rh and Ni due to their basic characteristics, which favor ethanol dehydrogenation but inhibit dehydration. As Rh and Ni are inactive for water gas shift reaction (WGSR), the development of bimetallic catalysts, alloy catalysts, and double-bed reactors is promising to enhance hydrogen production and long-term catalyst stability. Autothermal reforming of bio-ethanol has the advantages of lesser external heat input and long-term stability. Its overall efficiency needs to be further enhanced, as part of the ethanol feedstock is used to provide low-grade thermal energy. Development of millisecond-contact time reactor provides a low-cost and effective way to reform bio-ethanol and hydrocarbons for fuel upgrading. Despite its early R&D stage, bio-ethanol reforming for hydrogen production shows promises for its future fuel cell applications.     

Biogas steam and oxidative reforming processes for synthesis gas and hydrogen production in conventional and microreactor reaction systems

In this work, a renewable source, biogas, was used for synthesis gas and hydrogen generation by steam reforming (SR) or oxidative reforming (OR) processes. Several Ni-based catalysts and a bimetallic Rh–Ni catalyst supported on magnesia or alumina modified with oxides like CeO₂ and ZrO₂ were used. For all the experiments, a synthetic biogas which consisted of 60% CH₄ and 40% CO₂ (vol.) was fed and tested in a fixed bed reactor system and in a microreactor reaction system at 1073 K and atmospheric pressure. The catalysts which achieved high activity and stability were impregnated in a microreactor to explore the viability of process intensification. For the SR process different steam to carbon ratios, S/C, varied from 1.0 to 3.0 were used. In the case of OR process the O₂/CH₄ ratio was varied from 0.125 to 0.50. Comparing conventional and microreactor reaction systems, one order of magnitude higher TOF and productivity values were obtained in the microreactors, while for all the tested catalysts a similar activity results were achieved. Physicochemical characterization of catalysts samples by ICP-AES, N₂ physisorption, H₂ chemisorption, TPR, SEM, XPS and XRD showed differences in chemical state, metal–support interactions, average crystallite sizes and redox properties of nickel and rhodium metal particles, indicating the importance of the morphological and surface properties of metal phases in driving the reforming activity.     

Steam reforming of technical bioethanol for hydrogen production

Essentially all work on ethanol steam reforming so far has been carried out using simulated bioethanol feedstocks, which means pure ethanol mixed with water. However, technical bioethanol consists of a lot of different components including sugars, which cannot be easily vaporized and steam reformed. For ethanol steam reforming to be of practical interest, it is important to avoid the energy-intensive purification steps to fuel grade ethanol. Therefore, it is imperative to analyze how technical bioethanol, with the relevant impurities, reacts during the steam reforming process. We show how three different distillation fractions of technical 2nd generation bioethanol, produced in a pilot plant, influence the performance of nickel- and ruthenium-based catalysts during steam reforming, and we discuss what is required to obtain high activity and long catalyst lifetime. We conclude that the use of technical bioethanol will result in a faster catalyst deactivation than what is observed when using pure ethanol–water mixtures because of contaminants remaining in the feed. However, the initial activity of the catalysts are not affected by this, hence it is important to not only focus on catalyst activity but rather on the lifetime of the catalyst.     

Exergy analysis of hydrogen production via steam methane reforming

The performance of hydrogen production via steam methane reforming (SMR) is evaluated using exergy analysis, with emphasis on exergy flows, destruction, waste, and efficiencies. A steam methane reformer model was developed using a chemical equilibrium model with detailed heat integration. A base-case system was evaluated using operating parameters from published literature. Reformer operating parameters were varied to illustrate their influence on system performance. The calculated thermal and exergy efficiencies of the base-case system are lower than those reported in literature. The majority of the exergy destruction occurs due to the high irreversibility of chemical reactions and heat transfer. A significant amount of exergy is wasted in the exhaust stream. The variation of reformer operating parameters illustrated an inverse relationship between hydrogen yield and the amount of methane required by the system. The results of this investigation demonstrate the utility of exergy analysis and provide guidance for where research and development in hydrogen production via SMR should be focused.     

Thermal management of methanol reforming reactors for the portable production of hydrogen

Three-dimensional numerical simulations were performed to address the thermal management issues associated with the design of a methanol reforming microchannel reactor for the portable production of hydrogen. The design of the reactor was fundamentally related to the direct coupling of reforming and combustion reactions by performing them on opposite sides of dividing walls in a parallel flow configuration. Effective autothermal operation was achieved through a combination of microchannel reactor technology with heat exchange in a direction perpendicular to the reacting fluid flow. Computational fluid dynamics simulations and thermodynamic analysis were carried out to investigate the effect of various design parameters on the characteristics of the generation, consumption, and exchange of thermal energy within the system. The results indicated that the ability to control temperature and temperature uniformity is of great importance to the performance of the system. The degree of temperature uniformity favorably affects the autothermal operation of the reactor. Temperature uniformity of the reactor can be improved by controlling the rate of heat transfer through a variety of factors such as wall thermal conductivity, fluid velocities, and dimensions. High wall thermal conductivity would be greatly beneficial to the performance of the system and the temperature uniformity of the reactor.     

Carbon deposition behavior in steam reforming of bio-oil model compound for hydrogen production

Catalyst deactivation caused by coke formation is a bottleneck in steam reforming of bio-oil for hydrogen production. The investigation of carbon deposition behavior can make a contribution to the improvement of catalyst and the knowledge of reaction mechanism. In this paper, m-cresol (C₇H₈O, one of the organic compounds present in bio-oil) was chosen as model compound. The experiment was carried out on a commercial Ni/MgO catalyst. As a comparative test, m-cresol decomposition showed carbon deposition can be formed more easily under higher temperature. In steam reforming process, for the competition of carbon deposition and carbon elimination, a peak value of coking formation rate was obtained in a broad range of temperature (575–900 °C). The increase of steam to carbon ratio can favor the carbon elimination. Final coking formation rate curve was determined under optimal reaction conditions and the results showed the severity of carbon deposition maintained a very low level during the entire reaction time. Based on the distribution of reforming products, high temperature and sufficient water feeding can favor the carbon conversion from solid and liquid phase to gaseous phase. Unreacted m-cresol is the main organic compound detected in liquid condensate. Some secondary reactions can be deduced through the other compounds detected. The carbon deposition state on catalyst surface can be in the form of nanofiber, but their concrete shapes can be different due to different reaction conditions.     

Thermodynamic study of hydrogen production from crude glycerol autothermal reforming for fuel cell applications

This study presents a thermodynamic analysis of hydrogen production from an autothermal reforming of crude glycerol derived from a biodiesel production process. As a composition of crude glycerol depends on feedstock and processes used in biodiesel production, a mixture of glycerol and methanol, major components in crude glycerol, at different ratios was used to investigate its effect on the autothermal reforming process. Equilibrium compositions of reforming gas obtained were determined as a function of temperature, steam to crude glycerol ratio, and oxygen to crude glycerol ratio. The results showed that at isothermal condition, raising operating temperature increases hydrogen yield, whereas increasing steam to crude glycerol and oxygen to crude glycerol ratios causes a reduction of hydrogen concentration. However, high temperature operation also promotes CO formation which would hinder the performance of low-temperature fuel cells. The steam to crude glycerol ratio is a key factor to reduce the extent of CO but a dilution effect of steam should be considered if reforming gas is fed to fuel cells. An increase in the ratio of glycerol to methanol in crude glycerol can increase the amount of hydrogen produced. In addition, an optimal operating condition of glycerol autothermal reforming at a thermoneutral condition that no external heat to sustain the reformer operation is required, was investigated.     

Underwater vehicle hydrogen production from methanol steam reforming using hydrogen peroxide

Methanol steam reforming (MSR) can supply hydrogen (H₂) to underwater vehicles equipped with a fuel cell. Low reaction temperatures ensure the composition of the reformed gas suitable for the H₂ purification unit and increase the design freedom of a reforming plant. However, such temperatures decrease the catalyst activity and thereby the methanol (MeOH) conversion and H₂ production. Herein, hydrogen peroxide (H₂O₂) was supplied with MeOH and water (H₂O) to ensure sufficient MeOH conversion and H₂ production at low temperatures. A tube reactor loaded with a commercial Cu/Zn catalyst was installed in an electric furnace maintained at 200–250 °C, and MeOH and 0 wt%, 11.88 wt%, 22.51 wt%, and 32.07 wt% H₂O₂ were supplied. When the furnace temperature was 200 °C, the MeOH conversion was 49.3% at 0 wt% H₂O₂ but 93.5% at 32.07 wt% H₂O₂. The effect of adding H₂O₂ was greater under the temperature conditions where the MeOH conversion was 100% or less. To analyze the effect of H₂O₂ addition on catalyst durability, the furnace was maintained at 200 °C, and the reactor was continuously operated for 110 h with 0 wt% and 32.07 wt% H₂O₂. The addition of H₂O₂ did not significantly decrease the Cu/Zn catalyst durability.     

Catalytic steam reforming of acetic acid for hydrogen production

A variety of supported metal catalysts were tested under conditions of steam reforming of acetic acid (HAc), which was selected as a model compound for pyrolysis oil. The influence of several parameters on catalytic activity and selectivity were examined, including catalyst composition, i.e. nature of the metal and the carrier, reaction temperature and time on stream. The metallic phase of such catalysts was comprised of various metals, such as Pt, Pd, Rh, Ru and Ni, which were supported on metal oxides carriers, such as _Al2O3${\mathrm{Al}}_2{\mathrm{O}}_3$, _La2O3/_Al2O3${\mathrm{La}}_2{\mathrm{O}}_3/{\mathrm{Al}}_2{\mathrm{O}}_3$, MgO/_Al2O3$\mathrm{MgO}/{\mathrm{Al}}_2{\mathrm{O}}_3$ and _CeO2/_Al2O3${\mathrm{CeO}}_2/{\mathrm{Al}}_2{\mathrm{O}}_3$. It was found that Ni-based and Ru-based catalysts present high activity and selectivity toward hydrogen production. Ru catalysts supported on _La2O3/_Al2O3${\mathrm{La}}_2{\mathrm{O}}_3/{\mathrm{Al}}_2{\mathrm{O}}_3$ and MgO/_Al2O3$\mathrm{MgO}/{\mathrm{Al}}_2{\mathrm{O}}_3$ carriers, showed good long-term stability as a function of time on stream. However, Ni catalysts were not as stable as Ru catalysts. The amount of carbon deposited on each catalyst was estimated, and it was found that it depends strongly on the nature of the catalyst.     

Thermodynamic analysis of propane dry and steam reforming for synthesis gas or hydrogen production

Thermodynamics was applied to investigate propane dry reforming (DR) and steam reforming (SR). Equilibrium calculations employing the Gibbs free energy minimization were performed upon a wide range of pressure (1–5 atm), temperature (700–1100 K), carbon dioxide to propane ratio (CPR, 1–12) and water to propane ratio (WPR, 1–18). From a thermodynamic perspective, it is demonstrated that DR is promising for production of synthesis gas with low hydrogen content, as opposite to SR which favours generation of synthesis gas with high hydrogen content. Complete conversion of propane was obtained for the range of pressure, temperature, CPR and WPR considered in this study. Atmospheric pressure is shown to be preferable for both DR and SR. Approximately 10 mol of synthesis gas can be produced per mole of propane at a temperature greater than 1000 K from DR when CPR is higher than 6. The optimum conditions for synthesis gas production from DR are found to be 975 K (CPR = 3) for a H₂/CO ratio of 1 and 1100 K (CPR = 1) for a H₂/CO ratio of 2. The greatest CO₂ conversion (95%) can be obtained also at 1100 K and CPR = 1. Preferential conditions for hydrogen production from SR are achieved with the temperatures between 925 and 975 K and WPRs of 12–18. The maximum number of moles of hydrogen produced is 9.1 (925 K and WPR = 18). Under conditions that favour hydrogen production, methane and carbon formation can be eliminated to negligible level.     

Selection of appropriate primary fuel for hydrogen production for different fuel cell types: Comparison between decomposition and steam reforming

In order to select a proper hydrogen production system being compatible with fuel cell, a variety of interesting primary fuels such as light hydrocarbons and alcohols were tested in the decomposition (D) and the steam reforming (SR) processes by thermodynamic approach. The reaction performances of the systems particularly under thermally self-sustained condition were focused on. To obtain self-sustained condition, two approaches, splitting feed and splitting gas product streams to the burner for heat supply to endothermic hydrogen processor, are investigated. Our results revealed that splitting gas product gave higher carbon capture than splitting feed but lower in hydrogen yield. As expected, steam reforming provides higher hydrogen production, however, lower in hydrogen purity and carbon capture comparing to decomposition process. By considering primary fuels, D-alcohols could be applied to MCFC and SOFC, among these, D-C₂H₅OH was preferable because it gives the highest ratio of H₂/CO. For D-light hydrocarbon systems, which is operated at 1100 K providing 97% hydrogen purity, is suitable to be connected to MCFC, SOFC and also PEMFC.     

Numerical and experimental study on hydrogen production via dimethyl ether steam reforming

This work presents the characteristics of catalytic dimethyl ether (DME)/steam reforming based on a Cu–Zn/γ-Al₂O₃ catalyst for hydrogen production. A kinetic model for a reformer that operates at low temperature (200 °C–500 °C) is simulated using COMSOL 5.2 software. Experimental verification is performed to examine the critical parameters for the reforming process. During the experiment, superior Cu–Zn/γ-Al₂O₃catalysts are manufactured using the sol-gel method, and ceramic honeycombs coated with this catalyst (1.77 g on each honeycomb, five honeycombs in the reactor) are utilized as catalyst bed in the reformer to enhance performance. The steam, DME mass ratio is stabilized at 3:1 using a mass flow controller (MFC) and a generator. The hydrogen production rate can be significantly affected depending on the reactant's mass flow rate and temperature. And the maximum hydrogen yield can reach 90% at 400 °C. Maximum 8% error for the hydrogen yield is achieved between modeling and experimental results. These experiments can be further explored for directly feeding hydrogen to proton exchange membrane fuel cell (PEMFC) under the load variations.     

Efficient operation of autothermal microchannel reactors for the production of hydrogen by steam methane reforming

Efficient conversion of methane to hydrogen has emerged as a significant challenge to realizing fuel cell-based energy systems. Autothermal microchannel reactors, coupling of exothermic and endothermic reactions in parallel channels, have become one of the most promising technologies in the field of hydrogen production. Such reactors were utilized as an intensified design for conducting the endothermic steam methane reforming reaction. The energy required by the endothermic process is supplied directly through the separating plates of the reactor structure from the exothermic process occurring on the opposing side. Optimal design problems associated with transport phenomena in such an autothermal system were analyzed. Various methods for designing and operating autothermal reactors employed in steam methane reforming were discussed. Computational fluid dynamics simulations were performed to identify the underlying principles of process intensification, and to delineate several design and operational features of the intensified reforming process. The results indicated that the autothermal reactor is preferable to be thermally conductive to ensure its structural integrity and maximum operating regime. However, the thermal properties of the reactor structure are not essential due to efficient heat transfer existing between endothermic and exothermic process streams. A reactor design which minimizes the mass transfer resistance is highly required, and the channel dimension is of critical importance. Furthermore, the challenges presented by the efficient operation of the autothermal system were identified, along with demonstrating the implementation of transport management in order to improve overall reactor performance and to mitigate extreme temperature excursions.     

Sustainability assessment of hydrogen production by steam reforming

A specific methodology was applied to investigate the expected impact on sustainability of processes for hydrogen production by steam reforming of natural gas. Reference process schemes based on the current industrial state-of-the-art and on innovative steam reforming technologies were defined and assessed. The methodology allowed the calculation of a sustainability “fingerprint” of the reference schemes, based on sustainability key performance indicators. The results obtained evidenced the potential advantages of innovative processes, based on integrated conversion and internal membrane separation reactors. However, the valorization of the by-product streams is an essential requirement to reduce the impact on sustainability of these processes. Besides the improvement of the reaction section, the optimization of the overall separation efficiency and of energy requirement emerged as the key elements that control the overall sustainability performance of these processes.     

Application of aspen plus to renewable hydrogen production from glycerol by steam reforming

Steam reforming is the most favored method for the production of hydrogen. Hydrogen is mostly manufactured by using steam reforming of natural gas. Due to the negative environmental impact and energy politics, alternative hydrogen production methods are being explored. Glycerol is one of the bio-based alternative feedstock for hydrogen production. This study is aimed to simulate hydrogen production from glycerol by using Aspen Plus. First of all, the convenient reactor type was determined. RPlug reactor exhibited the highest performance for the hydrogen production. A thermodynamic model was determined according to the formation of byproduct. The reaction temperature, water/glycerol molar feed ratio as reaction parameters and reactor pressure were investigated on the conversion of glycerol and yield of hydrogen. Optimum reaction parameters are determined as 500 °C of reaction temperature, 9:1 of water to glycerol ratio and 1 atm of pressure. Reactor design was also examined. Optimum reactor diameter and reactor length values were determined as 5 m and 50 m, respectively. Hydrogen purification was studied and 99.9% purity of H₂was obtained at 25 bar and 40 °C. The obtained results were shown that Aspen Plus has been successfully applied to investigate the effects of reaction parameters and reactor sizing for hydrogen production from glycerol steam reforming.     

Thermodynamic analysis of hydrogen production for fuel cell via oxidative steam reforming of propane

A thermodynamic analysis of hydrogen production from propane by oxidative steam reforming (OSR) is performed with a Gibbs free energy minimization method. Addition of oxygen reduces the enthalpy of the system and facilitates the heat supply. Equilibrium compositions of OSR as a function of temperature (300, 500, 700 and 900 °C), H₂O/C₃H₈ ratio (1.0–20.0) and O₂/C₃H₈ ratio (0.0–2.0) under oxidative and thermo-neutral (TN) conditions are evaluated. The results for oxidative conditions demonstrate that at 700 °C with H₂O/C₃H₈ ratios above 7.0 and/or O₂/C₃H₈ ratios higher than 1.3 are beneficial for hydrogen production which facilitates superior hydrogen yield, i.e. close to 9.0 mol/mol propane, with coke and methane formation reactions being suppressed effectively. For TN condition, autothermal temperature and equilibrium composition have a stronger dependence on O₂/C₃H₈ ratio than on H₂O/C₃H₈ ratio. Further calculations show that the condition at 700 °C with an appropriate H₂O/C₃H₈ ratio between 7.0 and 13.0 is favorable for achieving a high hydrogen yield and a low carbon monoxide yield. Therefore, a favorable operational range is proposed to ensure the most optimized product yield.     

Assessment of CO2 capture options from various points in steam methane reforming for hydrogen production

Steam methane reforming (SMR) is currently the main hydrogen production process in industry, but it has high emissions of CO₂, at almost 7 kg CO₂/kg H₂ on average, and is responsible for about 3% of global industrial sector CO₂ emissions. Here, the results are reported of an investigation of the effect of steam-to-carbon ratio (S/C) on CO₂ capture criteria from various locations in the process, i.e. synthesis gas stream (location 1), pressure swing adsorber (PSA) tail gas (location 2), and furnace flue gases (location 3). The CO₂ capture criteria considered in this study are CO₂ partial pressure, CO₂ concentration, and CO₂ mass ratio compared to the final exhaust stream, which is furnace flue gases. The CO₂ capture number (N_cc) is proposed as measure of capture favourability, defined as the product of the three above capture criteria. A weighting of unity is used for each criterion. The best S/C ratio, in terms of providing better capture option, is determined. CO₂ removal from synthesis gas after the shift unit is found to be the best location for CO₂ capture due to its high partial pressure of CO₂. However, furnace flue gases, containing almost 50% of the CO₂ in produced in the process, are of great significance environmentally. Consequently, the effects of oxygen enrichment of the furnace feed are investigated, and it is found that this measure improves the CO₂ capture conditions for lower S/C ratios. Consequently, for an S/C ratio of 2.5, CO₂ capture from a flue gas stream is competitive with two other locations provided higher weighting factors are considered for the full presence of CO₂ in the flue gases stream. Considering carbon removal from flue gases, the ratio of hydrogen production rate and N_cc increases with rising reformer temperature.     

A model of steam reforming of iso-octane: The effect of thermal boundary conditions on hydrogen production and reactor temperature

Steam reforming of iso-octane in a monolithic type reactor was simulated by a three-dimensional computational fluid dynamics model. The variations of hydrogen production and reactor temperature along the length of the reactor were calculated at isothermal, adiabatic and constant heat flux conditions. The reaction rate expressions based on steam reforming of methane in the Langmuir-Hinshelwood format were used to model steam reforming of iso-octane. The difference between the simulated results and experimental data on hydrogen produced was less than 18%. The results indicated that a large drop in temperature was in the first one-tenth of the reactor under adiabatic conditions with inlet temperatures of 600–900 °C. To achieve the same mole fraction of hydrogen (0.27, dry basis) at the exit of the reactor, the maximum temperature difference across the reactor was much smaller at certain heat flux conditions than that at adiabatic conditions. Further, rate of hydrogen production may be evenly distributed in the reactor under certain conditions of constant heat flux.     

Steam reforming of acetic acid for hydrogen production over Ni/CaxFeyO catalysts

Three Ni/Ca_xFe_yO (x/y = 2:1, 1:1, 1:2) catalysts are prepared by impregnation method and applied in steam reforming of acetic acid as the model compound of bio-oil for hydrogen production. The effects of reaction temperature, steam to carbon ratio (S/C), liquid hourly space velocity (LHSV) on gas contents and H₂ yield are carefully investigated and optimized. The fresh and used catalysts are characterized by BET, XRD, H₂-TPR, CO₂-TPD, SEM and TG methods. The experimental and characterization results show that the Ni/CaFe₂O₄ catalyst displays the best activity and stability among the three catalysts, providing 92.1% of H₂ yield under S/C = 5, LHSV = 3.4 h⁻¹ and at 600 °C. The strong interaction between Ni and CaFe₂O₄ support result in the formation of Ni–Fe alloy and Ca₂Fe₂O₅, which shows the synergistic effects on the resistant to carbon deposition and metal sintering, thereby improving the activity and stability of the Ni/CaFe₂O₄ catalyst.     

Thermodynamic analysis of steam reforming of ethanol and glycerine for hydrogen production

In the past few years there has been a growing interest in environmentally clean renewable sources for hydrogen production. In this context new technologies have been developed for ethanol and glycerine reforming. Hydrogen production varies significantly according to the operating conditions such as pressure, temperature and feed reactants ratio. The thermodynamic analysis provides important knowledge about the effects of those variables on the process of ethanol and glycerine reforming. The present work was aimed at analyzing the thermodynamic steam reforming of ethanol and glycerine, using Gibbs free energy minimization using actual temperature and pressure data found in the literature. The nonlinear programming model was implemented in GAMS^® and the CONOPT2 solver was used to solve the equations. The ideality in gaseous phase and the formation of solid carbon was considered. The methodology used reproduced the most relevant papers involving experimental studies and thermodynamic analysis.