Biohydrogen production using native carbon monoxide converting anaerobic microbial consortium predominantly Petrobacter sp.

In this study, anaerobic mixed microbial consortium isolated from a local sewage treatment plant in Guwahati, India, was used to convert carbon monoxide (CO) to hydrogen. The consortium was initially grown in acetate containing medium and later acclimatized to utilize CO as the sole carbon source for hydrogen production. By 16S rDNA analysis, the consortium was identified to be predominantly Petrobacter sp. Statistically designed experiments were then applied to optimize the CO conversion and hydrogen production by the anaerobic mixed consortium. To evaluate the significant factors that influenced the biohydrogen production, Plackett–Burman screening design of experiments was applied, which revealed that temperature and Fe²⁺ influenced the most on hydrogen production with P values less than 0.05 each. The effect due to pH and Ni²⁺ was less with P values 0.120 and 0.132, respectively. Concentration of Fe²⁺ and Ni²⁺ in the medium was then subsequently optimized by using Central Composite Design (CCD) of experiments followed by response surface methodology (RSM) which yielded the optimum value of 213 mg/L for Fe²⁺ and 2.2 mg/L for Ni²⁺. At these optimum conditions, 60.8 mol hydrogen production was achieved which was 8% higher than that observed from the screening experiment.     

Simultaneous thermophilic hydrogen production and phenol removal from palm oil mill effluent by Thermoanaerobacterium-rich sludge

Thermoanaerobacterium-rich sludge was used for hydrogen production and phenol removal from palm oil mill effluent (POME) in the presence of phenol concentration of 100–1000 mg/L. Thermoanaerobacterium-rich sludge yielded the most hydrogen of 4.2 L H₂/L-POME with 65% phenol removal efficiency at 400 mg/L phenol. Butyric acid and acetic acid were the main metabolites. The effects of oil palm ash, NH₄NO₃ and iron concentration (Fe²⁺) on hydrogen production and phenol removal efficiency from POME by Thermoanaerobacterium-rich sludge was investigated using response surface methodology (RSM). The RSM results indicated that the presence of 0.2 g Fe²⁺/L, 0.3 g/L NH₄NO₃ and 20 g/L oil palm ash in POME could improved phenol removal efficiency, with predicted hydrogen production and phenol removal efficiency of 3.45 L H₂/L-POME and 93%, respectively. In a confirmation experiment under optimized conditions highly reproducible results were obtained, with hydrogen production and phenol removal efficiency of 3.43 ± 0.12 L H₂/L-POME and 92 ± 1.5%, respectively. Simultaneous hydrogen production and phenol removal efficiency in continuous stirred tank reactor at hydraulic retention time (HRT) of 1 and 2 days were 4.0 L H₂/L-POME with 85% and 4.2 L H₂/L-POME with 92%, respectively. Phenol degrading Thermoanaerobacterium-rich sludge comprised of Thermoanaerobacterium thermosaccharolyticum, Thermoanaerobacterium aciditolerans, Desulfotomaculum sp., Bacillus coagulans and Clostridium uzonii. Phenol degrading Thermoanaerobacterium-rich sludge has great potential to harvest hydrogen from phenol-containing wastewater.     

Biohydrogen production from waste glycerol and sludge by anaerobic mixed cultures

Key factors affecting biohydrogen production from waste glycerol and sludge by anaerobic mixed cultures were optimized using response surface methodology (RSM) with central composite design (CCD). Investigated parameters were waste glycerol concentration, sludge concentration, and the amount of Endo–nutrient addition. Concentrations of waste glycerol and sludge had a significant individual effect on hydrogen production rate (HPR) (p ≤ 0.05). The interactive effect on HPR (p ≤ 0.05) was found between waste glycerol concentration and sludge concentration. The optimal conditions for the maximum HPR were: waste glycerol concentration 22.19 g/L, sludge concentration 7.16 g-total solid (TS/L), and the amount of Endo–nutrient addition 2.89 mL/L in which the maximum HPR of 1.37 mmol H₂/L h was achieved. Using the optimal conditions, HPR from a co-digestion of waste glycerol and sludge (1.37 mmol H₂/L h) was two times greater than the control (waste glycerol without addition of sludge) (0.76 mmol H₂/L h), indicating a significant enhancement of HPR by sludge. Major metabolites of the fermentation process were ethanol, 1,3-propanediol (1,3-PD), lactate, and formate.     

Influence of Cu concentration on the biohydrogen production of continuous stirred tank reactor

In this paper, the effect of hydraulic retention time (HRT, 16 h–4 h) on fermentative hydrogen production by mixed cultures was firstly investigated in a sucrose-fed anaerobic continuous stirred tank reactor (CSTR) at 35 °C and initial pH 8.79. After stable operations at HRT of 16–6 h, the bioreactor became unstable when the HRT was lowered to 4 h. The maximum hydrogen yield reached 3.28 mol H₂/mol-Sucrose at HRT 4 h. Supplementation of Cu²⁺ at HRT 4 h improved the operation stability through enhancement of substrate degradation efficiency. The effect of Cu²⁺ concentration ranging from 1.28 to 102.4 mg/L on fermentative hydrogen production was studied. The results showed that Cu²⁺ was able to enhance the hydrogen production yield with increasing Cu²⁺ concentration from 1.28 to 6.4 mg/L. The maximum hydrogen yield of 3.31 mol H₂/mol-Sucrose and the maximum hydrogen production rate of 14.44 L H₂/Day/L-Reactor were obtained at 6.4 mg/L Cu²⁺ and HRT 4 h Cu²⁺ at much higher concentration could inhibit the hydrogen production, but it could increase substrate degradation efficiency (12.8 and 25.6 mg/L Cu²⁺). The concentration of Cu²⁺ had effect on the distribution of soluble metabolite.     

Optimization of high-solid waste activated sludge concentration for hydrogen production in microbial electrolysis cells and microbial community diversity analysis

To enhance hydrogen recovery from high-solid waste activated sludge (WAS), microbial electrolysis cells (MECs) were used as an efficient device. The effects of WAS concentrations were firstly investigated. Optimal concentration for hydrogen production was 7.6 g VSS/L. Maximum hydrogen yields reached to 4.66 ± 1.90 mg-H₂/g VSS and 11.42 ± 2.43 mg-H₂/g VSS for MECs fed with raw WAS (R-WAS) and alkaline-pretreated WAS (A-WAS) respectively, which was much higher than that obtained traditional anaerobic digestion. Moreover, no propionic acid accumulation was achieved at the optimal concentration. Effective sludge reduction was also achieved in MECs feeding with A-WAS. 52.9 ± 1.3% TCOD were removed in A-WAS MECs, meanwhile, protein degradation were 50.4 ± 0.8%. The 454 pyrosequencing analysis of 16S rRNA gene revealed the syntrophic interactions were existed between exoelectrogen Geobacter and fermentative bacteria Petrimonas, which apparently drove the efficient performance of MECs fed with WAS.     

Co-fermentation of sewage sludge and algae and Fe2+ addition for enhancing hydrogen production

Co-fermentation of sewage sludge and algae was performed for enhancing the hydrogen production, and the effect of Fe²⁺ on co-fermentation process was examined. Results showed that both co-fermentation process and Fe²⁺ addition promoted hydrogen production. Highest hydrogen production of 28 mL/100 mL (14.8 mL H₂/g VS_added) was obtained from the co-fermentation group with 600 mg/L Fe²⁺ addition, which was 2.15 times, 2.00 times and 1.87 times of mono-fermentation of sludge, mono-fermentation of algae, and the co-fermentation group without Fe²⁺ addition. Both volatile solids and protein degradation were stimulated by co-fermentation process. Microbial analysis showed that co-fermentation groups with Fe²⁺ addition enriched Clostridium sensu stricto 13, Clostridium tertium and Terrisporobacter, which were positively correlated with cumulative hydrogen production. This study suggested that the co-fermentation of sludge and algae in the presence of Fe²⁺ could significantly improve the hydrogen production by stimulating the hydrogen-producing metabolism.     

Enhanced hydrogen production in a UASB reactor by retaining microbial consortium onto carbon nanotubes (CNTs)

Biohydrogen and subsequent biomethane generation from biomass is a promising strategy for renewable energy supply, because this combination can lead to higher energy recovery efficiency and faster fermentation than single methane fermentation. Microbial consortium control by retaining hydrogen-producers through the addition of microbial carriers is an alternative to constructing hydrogen-producing reactors. Here we report the use of carbon nanotubes (CNTs) as microbial carriers to enhance microbial retention and the production of biohydrogen. Laboratory-scale upflow anaerobic sludge blanket (UASB) reactors with CNTs at 100 mg/L achieved a maximal hydrogen production rate of 5.55 L/L/d and a maximal hydrogen yield of 2.45 mol/mol glucose. Compared to frequently used activated carbon (AC) particles, CNTs resulted in quicker startup and better performance of hydrogen fermentation in UASB reactors. Scanning electron microscopy (SEM) and pyrosequencing results revealed that the reactor with CNTs led to a high proportion of hydrogen-producing bacteria among the microbial consortium, which endowed the microbes with strong flocculation capacity and hydrogen productivity.     

Effects of Fe0 and Ni0 nanoparticles on hydrogen production from cotton stalk hydrolysate using Klebsiella sp. WL1316: Evaluation of size and concentration of the nanoparticles

Fe⁰ and Ni⁰ nanoparticles (NPs) of certain size were synthesized and added to the hydrogen production system from cotton stalk hydrolysate using Klebsiella sp. WL1316. Fe⁰ and Ni⁰ NPs with a size of 50 nm at all concentrations effectively improve hydrogen production during mid to late fermentation stages; particularly, the highest daily hydrogen production obtained following treatment with 50 nm Fe⁰ NPs at 30 mg/L fermented for 96 h significantly increased by 61% comparing to the control treatment. The reducing sugar consumption in cotton stalk hydrolysate and ΔOD₆₀₀ could be improved to some extent by Fe⁰ and Ni⁰ NPs supplementation. Addition of Fe⁰ or Ni⁰ NPs of 50 nm at a concentration of 30 mg/L resulted in enhanced cumulative hydrogen production with improvement of hydrogen yield reached higher than 20%, and the values of Y(H₂/S) were all higher than 90 mL/g _substrate, reflecting good hydrogen production and substrate consumption. The analysis of the main soluble metabolites profile revealed that supplementation with Fe⁰ and Ni⁰ NPs of suitable size and concentration may decrease the metabolic flux in the competitive branch of hydrogen production and increase the metabolic flux of the key node that leads to hydrogen generation, thus promoting biohydrogen synthesis.     

Microbial community dynamics and electricity generation in MFCs inoculated with POME sludges and pure electrogenic culture

Palm Oil Mill Effluent (POME) requires treatment before disposal due to its high organic matter content. In this study, the electrical performance and wastewater treatment efficiency were evaluated for Microbial Fuel Cells (MFC) treating unsterile POME with chemical oxygen demand (COD) from 200 to 10 000 mg/L. Since the inoculum type is a key factor in MFC performance, three types of sludge (methanogenic sludge (MS), facultative sludge (FS), and dry sludge (DS), obtained from the current POME treatment ponds were evaluated as inoculum. Dry sludge (DS) developed a maximum power output of 3.30 W/m³ by oxidizing 71% out of the COD provided by POME (1000 mg/L). Also, raw POME microbiota contributed to an enrichment of the community in DS inoculum along with the operation, in which Geobacter was the predominant genus reaching a current generation of 247 mA/m² and a power density of 2.36 W/m³. Conversely, pure electrogenic (Shewanella sp.) inoculation led to a diversification process, resulting in a lower current generation of 52 mA/m² and a power density of 0.10 W/m³. Consequently, microbial community dynamics revealed that MFC inoculation tends to a microbial equilibrium wherein generation of high current density was achieved by gradual microbial enrichment rather than external electrogenic invasion.     

Effect of nickel concentration on biohydrogen production: Organic solid waste vs. glucose

In recent years, alternative renewable energy generation sources have been investigated, highlighting the dark fermentation process due to it’s potential to obtain hydrogen-rich gas, which can be used as an energy source. Different trace metals intervene in this biological process. Nickel is one of the most important because it is a component of the [Ni–Fe] hydrogenase enzyme that catalyzes the oxidation of H₂ in numerous bacteria. The aim of this study was to evaluate the effect of nickel on biohydrogen production from organic solid waste (OSW). The experimental setup was carried out in batch tests using OSW as the substrate, glucose as a reference compound and the valuation of Ni²⁺ doses on the operation in a Sequencing Batch Reactor. The results of the batch tests showed that when using glucose as a substrate, 2 mg Ni²⁺/g VS_inoculum generated the highest hydrogen production (774 ± 7.3 mL H₂/L/d) and highest yield (55.8 ± 3.4 mL H₂/g of glucose), which was 34.4% higher than the control. Testing of different concentrations of nickel using OSW as a carbon source showed that the highest production was obtained without Ni²⁺ addition since the nickel concentration in the residue was 0.17 ± 0.06 mgNi/gVS; consequently, hydrogen production was not affected by the lack of Ni. The addition of 0.5 mg Ni²⁺/g VS_inoculum decreased acetate and butyrate production and increased caproate production.     

Magnetite nanoparticles enhanced glucose anaerobic fermentation for bio-hydrogen production using an expanded granular sludge bed (EGSB) reactor

The feasibility and efficiency of magnetite nanoparticles (Fe₃O₄NPs) enhanced bio-hydrogen production from glucose anaerobic fermentation were evaluated in this study. The results demonstrated that the maximum hydrogen yield (HY) of 12.97 mL H₂/g-VSS was obtained with 50 mg/L and 40–60 nm of Fe₃O₄NPs in batch experiments. Moreover, the optimum dosage of Fe₃O₄NPs produced hydrogen production (HP) of 4.95 L H₂/d in an expanded granular sludge bed (EGSB) reactor. Fe₃O₄NPs involved could promote ethanol and acetic acid accumulation. Fe²⁺ as by-product of iron corrosion could effectively promote the activity of key coenzymes and soluble microbial products (SMPs). Importantly, Fe₃O₄NPs addition resulted in the formation of electronic conductor chains to enhance the electron transport efficiency in the granular sludge. Microbial community analysis revealed that the relative abundance of butyrate-hydrogen-producing bacteria (Clostridium) decreased from 40.55% to 11.45%, while the relative abundance of ethanol-hydrogen-producing bacteria (Acetanaerobacterium and Ethanoligenens) increased from 19.62% to 35.35% with Fe₃O₄NPs involved, confirming that the fermentation type was transformed from butyrate-type to ethanol-type, which finally facilitated more hydrogen production.     

Microbial culture selection for bio-hydrogen production from waste ground wheat by dark fermentation

Hydrogen formation performances of different anaerobic bacteria were investigated in batch dark fermentation of waste wheat powder solution (WPS). Serum bottles containing wheat powder were inoculated with pure cultures of Clostridium acetobutylicum (CAB), Clostridium butyricum (CB), Enterobacter aerogenes (EA), heat-treated anaerobic sludge (ANS) and a mixture of those cultures (MIX). Cumulative hydrogen formation (CHF), hydrogen yield (HY) and specific hydrogen production rate (SHPR) were determined for every culture. The heat-treated anaerobic sludge was found to be the most effective culture with a cumulative hydrogen formation of 560 ml, hydrogen yield of 223 ml H₂ g⁻¹ starch and a specific hydrogen production rate of 32.1 ml H₂ g⁻¹ h⁻¹.     

Microbial characterization of hydrogen-producing bacteria in fermented food waste at different pH values

An anaerobic fermentation of food waste was conducted in a 0.5 L bioreactor incubated at a thermophilic temperature of 55 °C to evaluate the effects of different controlled pH values (5.0, 5.5 and 6.0) on biohydrogen production. Effective biohydrogen production was found at controlled pH 5.5 and 6.0 corresponding to lower lactic acid production compared to pH 5.0. It was demonstrated that biohydrogen production from food waste was pH-dependent with hydrogen yields of 79, 76 and 23 mmol H₂/L-media/d for pH 5.5, 6.0 and 5.0, respectively. Specific microbial determination for Clostridium sp. and total bacteria quantification were carried out by the fluorescent in-situ hybridization (FISH) technique. The number of Clostridium sp. for acclimatized sludge, fermentation broth at pH 5.0, 5.5 and 6.0 were 2.9 × 10⁸, 3.6 × 10⁸, 7.8 × 10⁸ and 5.4 × 10⁸ cells/ml, respectively. The quantification analysis showed that 92% of the total bacteria belonged to Clostridium sp. from clusters I and XI from the sample at controlled pH 5.5. The denaturing gradient gel electrophoresis (DGGE) bands of the sample after heat-treatment, acclimatization and during fermentation indicated the presence of Bacteroidetes, Caloromator australicus sp. and Clostridium sp.     

Optimization of photo-hydrogen production based on cheese whey spent medium

Cheese whey wastewater diluted to 10 g lactose/L was initially subjected to dark-fermentation by Enterobacter aerogenes MTCC 2822, and the VFAs-rich spent medium (acetic acid 1900 mg/L, butyric acid 537 mg/L, and traces of propionic acid) was subjected to photo-fermentation through enrichment by Ni²⁺ (0–8 μmol/L), Fe²⁺ (0–100 μmol/L) or Mg²⁺ (0–15 mmol/L) in batch mode by Rhodopseudomonas BHU 01 strain. The maximum cumulative H₂ production (144 ml) and yield (58 mmol) was obtained at 4 μmol Ni²⁺/L. Likewise, Fe²⁺ (60 μmol/L) resulted in maximum cumulative H₂ production (139 ml) and yield (56 mmol). Nevertheless, 6 mmol of Mg²⁺ did not significantly affect H₂ production (110 ml) or yield (44 mmol); the latter value in close proximity with the control (37 mmol). The concomitant reduction in COD was maximum (15.61%) for 4 μmol Ni²⁺/L, followed by 15.33% for 60 μmol Fe²⁺/L, and the least for 6 mmol Mg²⁺/L (14.5%). The observations suggest the role of Fe²⁺ and Ni²⁺ in regulation of nitrogenase and hydrogenase, while that of Mg²⁺ mainly in the biosynthesis of photopigment bacteriochlorophyll (Bchl).     

Effect of organic fraction of municipal solid waste addition to high rate activated sludge system for hydrogen production from carbon rich waste sludge

Municipal solid waste has been used for bio-methane production for many years. However, both methane and carbon dioxide that is produced during bio-methanization increases the greenhouse gas emissions; therefore, hydrogen production can be one of the alternatives for energy production from waste. Hydrogen production from the organic substance was studied in this study with the waste activated sludge from the municipal wastewater treatment. High rated activated sludge (HRAS) process was applied for the treatment to reduce energy consumption and enhance the organic composition of WAS. The highest COD removal (76%) occurred with the 12 g/L organic fraction of municipal solid waste (OFMSW) addition at a retention time of 120 min. The maximum hydrogen and methane yields for the WAS was 18.9 mL/g VS and 410 mL/g VS respectively. Total carbon emission per g VS of the substrate (OFMSW + waste activated sludge) was found as 0.087 mmol CO₂ and 28.16 mmol CO₂ for dark fermentation and bio-methanization respectively. These kinds of treatment technologies required for the wastewater treatment plantcompensate it some of the energy needs in a renewable source. In this way, the HRAS process decreases the energy requirement of wastewater treatment plant, and carbon-rich waste sludge enables green energy production via lower carbon emissions.     

Thermophilic dark fermentation of untreated rice straw using mixed cultures for hydrogen production

Biohydrogen production from untreated rice straw using different heat-treated sludge, initial cultivation pH, substrate concentration and particle size was evaluated at 55 °C. The peak hydrogen production yield of 24.8 mL/g TS was obtained with rice straw concentration 90 g TS/L, particle size <0.297 mm and heat-treated sludge S1 at pH 6.5 and 55 °C in batch test. Hydrogen production using sludge S1 resulted from acetate-type fermentation and was pH dependent. The maximum hydrogen production (P), production rate (R_m) and lag (λ) were 733 mL, 18 mL/h and 45 h respectively. Repeated-batch operation showed decreasing trend in hydrogen production probably due to overloading of substrate and its non-utilization. PCR-DGGE showed both hydrolytic and fermentative bacteria (Clostridium pasteurianum, Clostridium stercorarium and Thermoanaerobacterium saccharolyticum) in the repeated-batch reactor, which perhaps in association led to the microbial hydrolysis and fermentation of raw rice straw avoiding the pretreatment step.     

Isolation,characterization and optimization of photo-hydrogen production conditions by newly isolated Rhodobacter sphaeroides KKU-PS5

A purple non-sulfur (PNS) photosynthetic bacterium was isolated from an upflow anaerobic sludge blanket (UASB) bioreactor for methane production and was identified as Rhodobacter sphaeroides KKU-PS5 (GenBank Accession no. KC481702) by 16s rRNA gene sequence analysis. Strain KKU-PS5 could utilize glucose, xylose, fructose, arabinose, malate, succinate, acetate, butyrate, lactate and D-mannitol for growth and hydrogen production. Malate was a preferred carbon source while glutamate and Aji-L (waste from the process of crystallizing monosodium glutamate) were the preferred nitrogen sources. The ability to utilize Aji-L as a low-cost nitrogen supplement for photo-biohydrogen production by the strain KKU-PS5 is considered as its desirable characteristic. The threshold substrate concentration of malate was 30 mmol/L. The optimum conditions for hydrogen production from malate were an initial pH of 7.0, FeSO₄ concentration of 4 mg/L, temperature of 30 °C and light intensity of 6 klux. Under the optimum conditions, the maximum hydrogen production, the hydrogen yield (HY) and the hydrogen production rate (HPR) of 1330 mL-H₂/L, 3.80 mol-H₂/mol-malate, and 11.08 mL-H₂/L h, respectively, were achieved. Hydrogen production under a dark/light cycle led to a decreased HY and HPR in comparison to continuous illumination.     

Biohydrogen production from crude glycerol by immobilized Klebsiella sp. TR17 in a UASB reactor and bacterial quantification under non-sterile conditions

Biohydrogen production from crude glycerol by immobilized Klebsiella sp. TR17 was investigated in an up-flow anaerobic sludge blanket (UASB) reactor. The reactor was operated under non-sterile conditions at 40^○C and initial pH 8.0 at different hydraulic retention times (HRTs) (2–12 h) and glycerol concentrations (10–30 g/L). Decreasing the HRT led to an increase in hydrogen production rate (HPR) and hydrogen yield (HY). The highest HPR of 242.15 mmol H₂/L/d and HY of 44.27 mmol H₂/g glycerol consumed were achieved at 4 h HRT and glycerol concentrations of 30 and 10 g/L, respectively. The main soluble metabolite was 1,3-propanediol, which implies that Klebsiella sp. was dominant among other microorganisms. Fluorescence in situ hybridization (FISH) revealed that the microbial community was dominated by Klebsiella sp. with 56.96, 59.45, and 63.47% of total DAPI binding cells, at glycerol concentrations of 10, 20, and 30 g/L, respectively.     

Effect of organic loading rate on continuous hydrogen production from food waste in submerged anaerobic membrane bioreactor

The characteristics of hydrogen fermentation in a membrane bioreactor (HF-MBR) fed with food waste were investigated at thermophilic condition. The HF-MBR was operated at three different organic loading rates (OLRs) of 70.2, 89.4 and 125.4 kg-COD/m³/day. Biogas production rate increased from 22.4 to 32.8 and 62.5 l/day with OLR. The maximum Hydrogen yield and production rate were 111.1 mL-H₂/g-VS _added and 10.7 l-H₂/L/day at an OLR of 125.4 kg-COD/m³/day. The total carbohydrate degradation was better than 96% throughout the experimental runs. Continuous H₂ production from food waste with CH₄-free biogas was successfully sustained in the HF-MBR for 90 days. The microbial community was dominated by Clostridium sp. strain Z6. The H₂ production was significantly improved by shortening the retention time and increasing the OLRs. The HF-MBR showed an H₂ production capacity at the high OLRs due to its higher cell retention.     

Improving bio-H2 production by manganese doped magnetic carbon

Manganese doped magnetic carbon (MDMC) was synthesized to enhance bio-hydrogen (H₂) process under the mesophilic and thermophilic conditions. MDMC characterization showed that MnFe₂O₄, Fe₂O₃ and few MnCO₃ were adhered to activated carbon and formed MDMC whose specific surface area and average pore size were 110.92 m²·g⁻¹ and 3.2 nm, respectively. Suitable concentration of MDMC promoted while high dosage suppressed the H₂ production of glucose through anaerobic fermentation by heat-treated sludge. The highest yields of 211 and 148 ml H₂/g glucose were obtained at 400 mg/L (37 °C) and 600 mg/L MDMC (55 °C), being 55.8% and 19.3% higher than that of the control groups, respectively. Some possible mechanisms were proposed as follows: appropriate concentration of MDMC provided considerable and favorable sites for microbial colonization, released trace elements (e.g. Mn, Fe) into liquid for the microbial growth, and promoted the direct inter-species electron transfer. Moreover, MDMC could be recycled by magnetic separation after bio-H₂ process due to its magnetism.