Study on the hydrogen storage properties of a TiZrNbTa high entropy alloy

High-entropy alloys (HEAs), as a new class of metallic materials, have received more and more attention due to its excellent mechanical properties. In this study, the hydrogen absorption properties, such as hydrogen absorption capacity, thermodynamics, kinetics and cyclic properties, as well as the hydride structure of a newly designed TiZrNbTa HEA were investigated. The results showed that multiple hydrides including ε-ZrH₂, ε-TiH₂ and β-(Nb,Ta)H were found in the TiZrNbTa HEA after hydrogenation. With the increase of temperature from 293 K to 493 K, the maximum hydrogen absorption capacity decreased from 1.67 wt% to 1.25 wt% and the plateau pressure related with β-(Nb,Ta)H hydrides increased from 1.6 kPa to 14.8 kPa. The formation enthalpy of β-(Nb,Ta)H hydride was determined to be −6.4 kJ/mol, which was less stable than that of NbH and TaH hydrides. The results also showed that the TiZrNbTa HEA exhibited a rapid hydrogen absorption kinetic even at the room temperature with a short incubation time, and the hydrogen absorption mechanism was determined to be the nucleation and growth mechanism. Moreover, the hydrogen absorption capacity at 293 K decreased slowly with the cycle numbers, and remained 86% capacity after 10 cycles. Cracking occurred after hydrogen absorption and became worse with cycles.     

Hydrogen storage properties of new A3B2-type TiZrNbCrFe high-entropy alloy

Crystal structure and hydrogen storage properties of a novel equiatomic TiZrNbCrFe high-entropy alloy (HEA) were studied. The selected alloy, which had a A₃B₂-type configuration (A: elements forming hydride, B: elements with low chemical affinity with hydrogen) was designed to produce a hydride with a hydrogen-to-metal atomic ratio (H/M) higher than those for the AB₂- and AB-type alloys. The phase stability of alloy was investigated through thermodynamic calculations by the CALPHAD method. The alloy after arc melting showed the dominant presence of a solid solution C14 Laves phase (98.4%) with a minor proportion of a disordered BCC phase (1.6%). Hydrogen storage properties investigated at different temperatures revealed that the alloy was able to reversibly absorb and fully desorb 1.9 wt% of hydrogen at 473 K. During the hydrogenation, the initial C14 and BCC crystal structures were fully converted into the C14 and FCC hydrides, respectively. The H/M value was 1.32 which is higher than the value of 1 reported for the AB₂- and AB-type HEAs. The present results show that good hydrogen storage capacity and reversibility at moderate temperatures can be attained in HEAs with new configurations such as A₃B₂/A₃B₂H₇.     

Recent progress on the development of high entropy alloys (HEAs) for solid hydrogen storage: A review

High entropy alloys (HEA) represent a kind of materials with unique structural and functional properties, and have attracted wide attentions in many fields including hydrogen storage. Due to the huge diversity in the composition of HEAs, novel hydrogen storage materials with superior comprehensive performance are expected to be developed following the concept, with some notable progress made in the past decade. In this study, the present research status in HEAs for hydrogen storage is summarized from the aspects of theoretical guide, composition and preparation, microstructure and hydrogen storage properties. Moreover, the key issues in future development and possible application scenarios are analyzed.     

Hydrogen storage in TiZrNbFeNi high entropy alloys,designed by thermodynamic calculations

The hydrogen storage properties of the novel equiatomic TiZrNbFeNi and non-equiatomic Ti₂₀Zr₂₀Nb₅Fe₄₀Ni₁₅ high entropy alloys (HEAs) were studied. These alloys were designed with the aid of thermodynamic calculations using the CALPHAD method due to their tendency to form single C14 Laves phase, a phase desirable for room-temperature hydrogen storage. The alloys, which were synthesized by arc melting, showed a dominant presence of C14 Laves phases with the (Zr, Ti)₁(Fe, Ni, Nb, Ti)₂ constitution and small amounts of cubic phases (<1.4 wt%), in good agreement with the thermodynamic predictions. Hydrogen storage properties, examined at room temperature without any activation procedure, revealed that a maximum hydrogen storage capacity was reached for the equiatomic alloy in comparison to the non-equiatomic alloy (1.64 wt% vs 1.38 wt%) in the first cycle; however, the non-equiatomic alloy presented superior reversibility of 1.14 wt% of hydrogen. Such differences on reversibility and capacity among the two alloys were discussed based on the chemical fluctuations of hydride-forming and non-hydride-forming elements, the volume per unit cell of the C14 Laves phases and the distribution of valence electrons.     

Recent progress of nanotechnology in enhancing hydrogen storage performance of magnesium-based materials: A review

Hydrogen has attracted wide attention in the field of new energy, triggering a comprehensive study of hydrogen production, storage and application. This paper mainly studies the hydrogen storage capacity of magnesium-based materials with nanostructure. The reversible hydrogen capacity of Mg-based hydrogen storage materials can reach 7.6 wt%, but due to its poor kinetic and thermodynamic properties, its hydrogen storage performance is not as good as other hydrogen storage materials. In order to reduce the desorption temperature of materials, many studies have been carried out. Alloying, nanostructure and adding catalyst are feasible methods to improve the properties of Mg-based hydrogen storage alloys. By adding catalyst and alloy with other transition elements, the dehydrogenation temperature of magnesium-based materials has been reduced to less than 200 °C. The hydrogen storage of magnesium-based alloys has been practically applied.     

Perspectives of high entropy alloys as hydrogen storage materials

Storage is a challenging issue that cuts across distribution, delivery, and safe end-uses of hydrogen as fuel. All the fuel cell vehicles are equipped with inefficient and unsafe high-pressure hydrogen cylinders. It is well known that storing such a highly flammable gas at high pressure is not safe. Only hydrogen can be stored safely as a form of metal hydrides, and all the investigated metal hydrides are inefficient in one way or another. Four essential hydrogen parameters for solid-state storage for fuel cell applications are high volumetric storage capacity, excellent heat transfer, and recharge time and feasible charging discharging temperatures. The available metal tanks have good gravimetric storage capacity but did not satisfy the prescribed criterion for good volumetric capacity necessary for mobile applications. Recently, some promising reports are published on the hydrogen storage properties of newly discovered High Entropy Alloys (HEAs). HEAs provide vast composition selection freedom for the formation of favorable simple solid solution phase for hydrogen storage. The four core effects of these alloys may also play a vital role in hydrogen storage properties. Here we reviewed and summarized the published results on hydrogen storage properties of HEAs to date. We underlined different essential aspects for the future development of HEAs as hydrogen storage materials. This review article discusses and describes the perspectives of HEAs in regards to the hydrogen storage applications of these alloys and will provide insight into the future development of hydrogen storage HEAs.     

A comparative study of deuterium permeation behaviors of CoCrMnFeNi and AlCoCrFeNi high entropy alloys

With the advantage of excellent properties, high entropy alloys (HEAs) are regarded as potential candidates for future structural applications for nuclear devices, therefore the compatibility of hydrogen isotopes with HEAs becomes a key issue that has attracted a lot of attentions. A single FCC phase CoCrMnFeNi alloy with the mean grain size of 70.24 μm and a single BCC phase AlCoCrFeNi alloy with the mean grain size of 62.98 μm has been studied by a gas-driven permeation experiment apparatus for comparing their deuterium permeation behaviors in the present study. The results show that the permeability of the CoCrMnFeNi is larger than that of the AlCoCrFeNi, while the diffusion coefficient of the CoCrMnFeNi is smaller than that of the AlCoCrFeNi. The AlCoCrFeNi and the CoCrMnFeNi with different average grain sizes show different permeability, indicating that both crystal structure, chemical composition, and grain size of the HEAs have a great influence on their deuterium permeation behaviors.     

Structural evolution and hydrogen storage performance of Mg3LaHn (n = 9–20)

The magnesium-lanthanum-hydrogen systems possess the goodish stability and high hydrogen storage capacity, which make them perspective as commercial Mg-based hydrogen storage materials. The exploration of these intriguing properties evolving from small atomic and molecule cluster to bulk phase are, to our knowledge, the longstanding challenge. Here, we perform a theoretical study on the structural and electronic properties of Mg₃LaH_n (9 ≤ n ≤ 20) clusters by using the Crystal Structure AnaLYsis by Particle Swarm Optimization method combined with density functional theory calculations. It is found that Mg₃LaH₁₅ is the most stable cluster in the series, with hydrogen storage capacity of 6.6 wt% and adsorption energy of 2.76 eV. The present results offer new insights for the design and synthesis of novel hydrogen storage materials in the future.     

Synthesis and hydrogen storage behavior of Mg–V–Al–Cr–Ni high entropy alloys

The ternary MgVAl, MgVCr, MgVNi, quaternary MgVAlCr, MgVAlNi, MgVCrNi and quinary MgVAlCrNi alloys were produced by high energy ball milling (HEBM) under hydrogen pressure (3.0 MPa) as a strategy to find lightweight alloys for hydrogen storage applications. Most of the ternary and quaternary alloys presented multiphase structure, composed mainly of body-centered cubic (BCC) solid solutions and Mg-based hydrides. Only the quinary MgVAlCrNi high entropy alloy (HEA) formed a single-phase structure (BCC solid solution), which is a novel lightweight (ρ = 5.48 g/cm³) single-phase HEA. The hydrogen storage capacity of this alloy was found to be very low (approximately 0.3 wt% of H). Two non-equiatomic alloys with higher fraction of Mg and V (strong hydride former elements), namely Mg₂₈V₂₈Al₁₉Cr₁₉Ni₆ and Mg₂₆V₃₁Al₃₁Cr₆Ni₆, were then designed, aiming at higher storage capacity. Both alloys were produced by HEBM. The results show that the non-stoichiometric alloys also presented low hydrogen storage capacity. The low affinity of these alloys with hydrogen was discussed in terms of enthalpy of hydrogen solution and enthalpy of hydride formation of the single components. This study brought to light the importance of considering both enthalpy of hydrogen solution and enthalpy of hydride formation of the alloying elements for designing Mg-containing HEA for hydrogen storage. Once Mg has a positive enthalpy of hydrogen solution, the alloys composition must be balanced with alloying elements with higher hydrogen affinity, i.e., negative values of enthalpy of solution and hydride formation.     

The study of amorphous La@Mg catalyst for high efficiency hydrogen storage

Amorphous catalysts have a large number of catalytic active sites. Here, we report a magnesium composite trace lanthanum catalyst (La@Mg), in which La and Mg layers form amorphous Mg–La compound on the surface of layered Mg. The test shows this La@Mg has hydrogen storage capacity of about 7.6 wt% and hydrogen desorption of 7.2 wt%, higher than that of crystalline La@Mg and sole Mg, rapid absorption/desorption kinetic and stable reversible absorption/desorption cycles. La@Mg exhibits an optimistic hydrogen storage performance than Mg-based materials previously reported in the literature. Combined with theoretical calculations, it is shown that the amorphous Mg–La has an catalysis on hydrogen storage performance of La@Mg system, which contributing to the dispersion of Mg and providing channels for hydrogen diffusion, facilitating hydrogenation by accelerating H atoms diffuse between the subsurface and the surface. This work provides experiment and mechanism guidance for the development of efficient hydrogen storage materials.     

Effects of charging,strain, and doping on the interaction between H2 and nitrogen-rich Penta-CN2 sheet

The development of advanced materials for the safety and efficiency of hydrogen storage media is necessary. We computationally explored the hydrogen storage properties of penta-CN₂ sheet. The hydrogen adsorption properties of neutral, negatively charged, externally strained, and metal-doped penta-CN₂ sheets were investigated in detail. Here, for the first time, the effect of the strain of two-dimensional nonmetallic materials on hydrogen adsorption is investigated. We found that the hydrogen binding energy increases to ?0.20 eV and achieves storage capacities up to 9.00 wt % on the negatively charged substrate, and to ?0.14 eV at 18% stretching. Moreover, metal doping causes hydrogen adsorption energy to increase to ?0.25–0.82 eV. The hydrogen storage capacity of Li-doped defective CN₂ sheet is up to 10.90 wt%. Our study may provide new insights into the search for advanced materials for reversible hydrogen storage.     

Crystal structure and hydrogen storage properties of AB-type TiZrNbCrFeNi high-entropy alloy

The crystal structure and hydrogen storage properties of a novel equiatomic TiZrNbCrFeNi high-entropy alloy (HEA) were studied. The alloy, which had an AB-type configuration (A: elements forming hydride, B: elements with low chemical affinity with hydrogen), was selected with the aid of thermodynamic calculations employed by the CALPHAD method. The arc-melted AB-type TiZrNbCrFeNi alloy showed the presence of two C14 Laves phases in different fractions but with slight differences in unit cell parameters. Hydrogen storage properties investigated through pressure-composition-temperature absorption and desorption isotherms at different temperatures revealed that the alloy could absorb 1.5 wt% of hydrogen at room temperature without applying any activation procedure, but full desorption was not obtained. At 473 K, the alloy was able to reversibly absorb and fully desorb 1.1 wt% of hydrogen. After full hydrogenation at 473 K, the initial metallic C14 Laves phases were converted into their respective Laves phase hydrides. Under cycling, the fractions of two C14 Laves phases changed while one of the phases was more active to accommodate the hydrogen atoms. After dehydrogenation at 473 K, the alloy presented a single C14 Laves phase. The microstructural analysis, before and after cycling, showed a very well homogeneous microstructure and good distribution of elements.     

Different effects of temperature on supramolecular protein and non-protein materials in hydrogen storage

The storage of large quantities of hydrogen at ambient temperature is a key factor in establishing a hydrogen-based economy. One strategy for hydrogen storage is to exploit the interaction between H₂ and a solid material by physisorption of hydrogen on porous materials. However, physisorption materials containing MOF, porous carbons, zeolites, clathrates, and synthesized organic polymers physisorb only about 1 wt% of H₂ at ambient temperature. One approach to solving this problem is to prepare new classes of physisorption materials which exhibits a mechanism different from the reported materials in hydrogen storage. Here we report the synthesis of apo cross-linked ferritin supramolecules by disulfide bonds, and their holo form. Unlike non-protein adsorbents, the hydrogen storage capacity of these protein materials increases as a function of temperature over the range of 20–40 °C. The holo supramolecules enable the adsorption of hydrogen up to 3.51 wt% at 40 °C and 40 bar H₂. In contrast, non-protein physisorption materials such as activated carbon and nano Fe₂O₃ marginally adsorb hydrogen, and, as reported, their ability to adsorb hydrogen decreases with increasing temperature under the same experimental condition. These results demonstrate that protein materials have a unique hydrogen storage mechanism which offers new opportunities in exploration of physisorption materials at ambient temperature.     

ZIF-67 derived Co@CNTs nanoparticles: Remarkably improved hydrogen storage properties of MgH2 and synergetic catalysis mechanism

Transition-metal nanoparticles (NPs) can catalytically improve the hydrogen desorption/absorption kinetics of MgH₂, yet this catalysis could be enhanced further by supporting NPs on carbon-based matrix materials. In this work, Co NPs with a uniform size of 10 nm loaded on carbon nanotubes (Co@CNTs) were synthesized in situ by carbonizing zeolitic imidazolate framework-67 (ZIF-67). The novel Co@CNTs nanocatalyst was subsequently doped into MgH₂ to remarkably improve its hydrogen storage properties. The MgH₂-Co@CNTs starts to obviously release hydrogen at 267.8 °C, displaying complete release of hydrogen at the capacity of 6.89 wt% at 300 °C within 15 min. For absorption, the MgH₂-Co@CNTs uptakes 6.15 wt% H₂ at 250 °C within 2 min. Moreover, both improved hydrogen capacity and enhanced reaction kinetics of MgH₂-Co@CNTs can be well preserved during the 10 cycles, which confirms the excellent cycling hydrogen storage performances. Based on XRD, TEM and EDS results, the catalytic mechanism of MgH₂-Co@CNTs can be ascribed to the synergetic effects of reversible phase transformation of Mg₂Co to Mg₂CoH₅, and physical transformation of CNTs to carbon pieces. It is demonstrated that phase transformation of Mg₂Co/Mg₂CoH₅ can act as “hydrogen gateway” to catalytically accelerate the de/rehydrogenation kinetics of MgH₂. Meanwhile, the carbon pieces coated on the surfaces of MgH₂ particles not only offer diffusion channels for hydrogen atoms but also prevent aggregation of MgH₂ NPs, resulting in the fast reaction rate and excellent cycling hydrogen storage properties of MgH₂-Co@CNTs system.     

Enhancement of hydrogen storage properties of metal-organic framework-5 by substitution (Zn,Cd and Mg) and decoration (Li,Be and Na)

Two strategies of decoration by three elements Z = Li, Be and Na in cyclic site, and substitution of Zn by Mg and Cd in unit cell were used in the framework of functional density theory to tune the hydrogen storage properties of metal-organic framework-5 (MOF-5) based on Zn whose decomposition temperature and initial gravimetric capacity are 300 K and 1.57 wt% respectively.Based on the adsorption of hydrogen molecules in the crystal surface at three different adsorption sites with three orientations of H₂, we show that our system may reach a maximum gravimetric storage capacity of 4.09 wt% for multiple hydrogen molecules. Moreover, the functionalization of Z combined to the substitution, shows an exceptional improvement of hydrogen storage properties. For example, Mg-MOF-5 decorated with Li₂ has a capacity up to 5.41 wt% and 513 K as desorption temperature.     

Synthesis and characterization of hydrogenated novel AlCrFeMnNiW high entropy alloy

A novel high entropy alloy (HEA) i.e. AlCrFeMnNiW is synthesized via high-energy planetary ball milling with an average crystallite size of 10.37 nm. The morphology study of hydrogenated and dehydrogenated HEA is carried out through Scanning Electron Microscope (SEM). The HEA is charged with hydrogen using inhouse Sievert's Apparatus which results to be maximum hydrogen storage capacity of 0.615 wt% at atmospheric pressure and temperature. The dehydrogenation of the sample is performed through thermogravimetry (TG) at different scanning rate. The crystalline structure (i.e. lattice parameters) and chemical composition of HEA is studied using X-Ray Diffraction (XRD) and Energy Dispersive X-Ray analysis (EDX) respectively. The unit cell volume of as-prepared alloy is estimated as 0.03131 nm³ whereas the average crystallite size as 10.37 nm. It is observed that the unit cell volume is increased by 0.67% and crystallite size decreased by 10.8% upon hydrogenation whereas it is then decreased by 0.2% and increased by 6.7% respectively upon dehydrogenation. Activation energy during hydrogen desorption is found to be −8.161 kJ/mol. The enthalpy and entropy of the mixing are estimated to be −2.645 kJ/mol and 1.793 R J/mol K.     

Enhanced hydrogen storage properties of Ti–Cr–Nb alloys by melt-spin and Mo-doping

Ti–Cr–Nb hydrogen storage alloys with a body centered cubic (BCC) structure have been successfully prepared by melt-spin and Mo-doping. The crystalline structure, solidification microstructural evolution, and hydrogen storage properties of the corresponding alloys were characterized in details. The results showed that the hydrogen storage capacity of Ti–Cr–Nb ingot alloys increased from 2.2 wt% up to around 3.5 wt% under the treatment of melt-spin and Mo-doping. It is ascribed that the single BCC phase of Ti–Cr–Nb alloys was stabilized after melt-spin and Mo-doping, which has a higher theoretical hydrogen storage site than the Laves phase. Furthermore, the melt-spin alloy after Mo doping can further effectively increase the de-/absorption plateau pressure. The hydrogen desorption enthalpy change ΔH of the melt-spin alloy decreased from 48.94 kJ/mol to 43.93 kJ/mol after Mo-doping. The short terms cycling test also manifests that Mo-doping was effective in improving the cycle durability of the Ti–Cr–Nb alloys. And the BCC phase of the Ti–Cr–Nb alloys could form body centered tetragonal (BCT) or face center cubic (FCC) hydride phase after hydrogen absorption and transform to the original BCC phase after desorption process. This study might provide reference for developing reversible metal hydrides with favorable cost and acceptable hydrogen storage characteristics.     

Cerium hydride generated during ball milling and enhanced by graphene for tailoring hydrogen sorption properties of sodium alanate

In this study, NaAlH₄?based hydrogen storage materials with dopants were prepared by a two-steps in-situ ball milling method. The dopants adopted included Ce, few layer graphene (FLG), Ce + FLG, and CeH_2.51. The hydrogen storage materials were studied by non-isothermal and isothermal hydrogen desorption measurements, X-ray diffractions analysis, cycling sorption tests, and morphology analysis. The hydrogen storage performance of the as-prepared NaAlH₄ with Ce addition is much better than that with CeH_2.51 addition. This is due to that the impact of Ce occurs from the body to the surface of the materials. The addition of FLG further enhances the impact of Ce on the hydrogen storage performance of the materials. The hydrogen storage capacity, hydrogen sorption kinetics, and cycle performance of NaAlH₄ with Ce + FLG additions are all better than NaAlH₄ materials with the addition of either Ce or FLG alone. The NaAlH₄ with Ce and FLG addition starts to release hydrogen at 85 °C and achieves a capacity of 5.06 wt% after heated to 200 °C. The capacity maintains at 4.91 wt% (94.7% of the theoretical value) for up to 8 cycles. At 110 °C, the material can release isothermally a hydrogen capacity of 2.8 wt% within 2 h. The activation energies for the two hydrogen desorption steps of NaAlH₄ with Ce and FLG addition are estimated to be 106.99 and 125.91 kJ mol^?1 H₂, respectively. The related mechanisms were studied with first-principle and experimental methods.     

Hydriding behavior of Mg-50 wt% ZrCrFe composite Prepared by high energy ball milling

Magnesium hydride has a high theoretically storage capacity, which amounts to 7.6 wt%. It is therefore a promising candidate for hydrogen storage applications. However, its major drawback is its high desorption temperature of well over 300 °C, which is related to the high stability of the Mg–H bonds and expressed in the high enthalpy of hydride formation (77 kJ/mol). The preparation of Mg composites with other hydrogen storage compounds is an effective method to improve the hydrogen storage properties of Mg. Thus we prepared Mg-50 wt% ZrCrFe alloy composite by high energy ball milling under argon atmosphere. X-ray diffraction (XRD) studies on the composite before and after hydriding cycles suggest no intermetalic phase is formed between Mg and the elements of the alloy. The morphological studies carried on by Scanning Electron Microscope (SEM) technique suggest that the alloy particles are homogeneously distributed throughout the Mg surface. A particle reduction after hydrogenation is also visible. Hydriding/dehydriding properties of the composites are investigated by PCT measurements using a dynamic system. The maximum hydrogen capacity for this composite is found to be 4.5 wt%. The reaction kinetics have also been recorded in a temperature range from RT to 300 °C and the thermodynamic parameters calculated from Van’t Hoff plot. From the results it is found that the alloy reacts with hydrogen also when cooled to room temperature while at higher temperature it works as catalyst.     

Structural,hydrogen storage,and electrochemical performance of LaMgNi4 alloy and theoretical investigation of its hydrides

Structural, hydrogen storage, and electrochemical properties of LaMgNi₄ alloy were investigated in this study to determine whether it can be used as an active material of the negative electrode in nickel–metal hydride (Ni/MH) batteries. X-ray diffraction study showed that amorphization occurs at the first dehydrogenation cycle and was recovered crystallization after 873 K annealing.Maximum hydrogen storage capacity reached 1.4 wt% in the first hydrogenation under 373 K. The reannealed alloy showed improved reversible hydrogen storage capacity at ～0.9 wt% due to more LaNi₅ phase composition. Electrodes prepared from the investigated alloy showed maximum discharge capacities of ～340 mAh/g at 10 mA/g. The LaMgNi₄ alloy electrode exhibited satisfactory cycling stability remaining 47% of its initial capacity after 250 cycles. The negative cohesive energy indicated the exothermic process and stable compound structures of the LaMgNi₄ alloy and its hydrides via Density functional theory calculations.