Autogenous growth of highly active bifunctional Ni–Fe2B nanosheet arrays toward efficient overall water splitting

Developing an effective and low-cost bifunctional electrocatalyst for both OER and HER to achieve overall water splitting is remaining a challenge to meet the needs of sustainable development. Herein, an electroless plating method was employed to autogenous growth of ultrathin Ni–Fe₂B nanosheet arrays on nickel foam (NF), in which the whole liquid phase reduction reaction took no more than 20 min and did not require any other treatments such as calcination. In 1.0 M KOH electrolyte, the resulted Ni–Fe₂B ultrathin nanosheet displayed a low overpotential of 250 mV for OER and 115 mV for HER to deliver a current density of 10 mA cm^?2, and both OER and HER activities remained stable after 26 h stability testing. Further, the couple electrodes composed of Ni–Fe₂B could afford a current density of 10 mA cm^?2 towards overall water splitting at a cell voltage of 1.64 V in 1.0 M KOH and along with excellent stability for 26 h. The outstanding electrocatalytic activities can be attributed to the synergistic effect of electron-coupling across Ni and Fe atoms and active sites exposed by large surface area. The effective combination of low cost and high electrocatalytic activity brings about a promising prospect for Ni–Fe₂B nanosheet arrays in the field of overall water splitting.     

Facile electrodeposited amorphous Co–Mo–Fe electrocatalysts for oxygen evolution reaction

A new type of superior activity and highly cost-effective amorphous electrocatalyst Co–Mo–Fe on nickel foam (NF) supports is prepared by facile one-step rapid electrodeposition. The amorphous electrocatalyst Co–Mo–Fe/NF shows excellent oxygen evolution reaction (OER) performance, with a small overpotential of 218 mV at 10 mA cm^?2 current density in 1 M KOH. It only needs overpotential of 252 mV at 50 mA cm^?2 current density in 1 M KOH, and the Tafel slope is 45 mV dec^?1. The results show that the doping of Fe significantly improves the oxygen evolution capacity of the Co–Mo–Fe system. The synergistic effect of the three metals and the doping of the third metal iron make the oxygen evolution active sites of the whole system increase significantly. This provides a feasible direction for the oxygen evolution reaction of cobalt transition metal.     

In-situ self-reconstruction of Ni–Fe–Al hybrid phosphides nanosheet arrays enables efficient oxygen evolution in alkaline

Developing efficient oxygen evolution reaction (OER) electrocatalysts with earth-abundant elements is very important for sustainable H₂ generation via electrochemical water splitting. Here we design a crystalline-amorphous Ni–Fe–Al hybrid phosphides nanosheet arrays grown on NiFe foam for efficient OER application. Dynamic surface reorganization of phosphides at anodic/cathodic polarizations is probed by in situ Raman spectroscopy. The reconstructed amorphous Ni(Fe)OOH species are determined as the active phases that facilitate the OER process. This unique electrode shows highly catalytic activity toward water oxidation, achieving the current densities of 10 and 100 mA cm^?2 at 181 and 214 mV in 1 M KOH, respectively. Meanwhile, it also exhibits excellent stability at a large current density of 100 mA cm^?2 for over 60 h. This work reveals the dynamic structural transformation of pre-catalyst in realistic conditions and highlights the important role of oxyhydroxides as real reactive species in OER process with high activity.     

Ru-doped 3D porous Ni3N sphere as efficient Bi-functional electrocatalysts toward urea assisted water-splitting

Developing efficient, stable and ideal urea oxide (UOR) electrocatalyst is key to produce green hydrogen in an economical way. Herein, Ru doped three dimensional (3D) porous Ni₃N spheres, with tannic acid (TA) and urea as the carbon and nitrogen resources, is synthesized via hydrothermal and low-temperature treated process (Ru–Ni₃N@NC). The porous nanostructure of Ni₃N and the nickel foam provide abundant active sites and channel during catalytic process. Moreover, Ru doping and rich defects favor to boost the reaction kinetics by optimizing the adsorption/desorption or dissociation of intermediates and reactants. The above advantages enable Ru–Ni₃N@NC to have good bifunctional catalytic performance in alkaline media. Only 43 and 270 mV overpotentials are required for hydrogen evolution (HER) and oxygen evolution (OER) reactions to drive a current of 10 mA cm^?2. Moreover, it also showed good electrocatalytic performance in neutral and alkaline seawater electrolytes for HER with 134 mV to drive 10 mA cm^?2 and 83 mV to drive 100 mA cm^?2, respectively. Remarkably, the as-designed Ru–Ni₃N@NC also owns extraordinary catalytic activity and stability toward UOR. Moreover, using the synthesized Ru–Ni₃N@NC nanomaterial as the anode and cathode of urea assisted water decomposition, a small potential of 1.41 V was required to reach 10 mA cm^?2. It can also be powered by sustainable energy sources such as wind, solar and thermal energies. In order to make better use of the earth's abundant resources, this work provides a new way to develop multi-functional green electrocatalysts.     

Ultrafine Ru nanoparticles derived from few-layered Ti3C2Tx MXene templated MOF for highly efficient alkaline hydrogen evolution

It is meaningful to search high-efficient and inexpensive electrocatalysts for hydrogen evolution reaction (HER) due to the energy crisis and environmental pollution. Here, we report the preparation of ultrafine Ru nanoparticles from a hybrid of ZIF-L(Co) MOF and polydopamine coated few-layered Ti₃C₂T_x MXene (FL-Ti₃C₂T_x). FL-Ti₃C₂T_x is used as a template to grow regular leaf-shaped ZIF-L(Co) nanosheets through the reaction of Co ions anchored on the MXene surface with 2-methylimidazole. The obtained hybrid is then doped with Ru ions through ion exchange between Ru and Co ions, followed by thermal annealing at a temperature of 350 °C in an Ar atmosphere to produce ultrafine Ru nanoparticles. The obtained Ru@ZIF-L(Co)/FL-Ti₃C₂T_x nanocomposite shows outstanding HER performance with a low overpotential of 16.2 mV at a current density of 10 mA cm^?2, a small Tafel slope of 21.0 mV dec^?1 and excellent stability in 1.0 M KOH solution. This work provides a new strategy for the design and synthesis of highly efficient HER catalyst via MOFs with tunable composition and structure.     

Cobalt doping VS2 on nickel foam as a high efficient electrocatalyst for hydrogen evolution reaction

The development of non-precious metal catalysts with abundant reserves, low prices and good performance for HER is desired. In this work, rodlike Co doping VS₂ arrays on nickel foam (NF) (Co-VS₂/NF) were fabricated by a simple one-step solvothermal method. Structure characterization indicated that Co doping reduced the size of rodlike Co-VS₂ and meanwhile can modulate its electronic structure, which is beneficial for the enhancement of HER performance. The optimal Co-VS₂/NF-2 reveals a low overpotential of 164.5 mV at ?10 mA cm^?2, small Tafel slope of 52.2 mV dec^?1 and excellent long-term stability after 2000 cycles in 1 M KOH.     

A highly active composite electrocatalyst Ni–Fe–P–Nb2O5/NF for overall water splitting

This work demonstrates a facile Nb₂O₅-decorated electrocatalyst to prepare cost-effective Ni–Fe–P–Nb₂O₅/NF and compared HER & OER performance in alkaline media. The prepared electrocatalyst presented an outstanding electrocatalytic performance towards hydrogen evolution reaction, which required a quite low overpotential of 39.05 mV at the current density of ?10 mA cm^?2 in 1 M KOH electrolyte. Moreover, the Ni–Fe–P–Nb₂O₅/NF catalyst also has excellent oxygen evolution efficiency, which needs only 322 mV to reach the current density of 50 mA cm^?2. Furthermore, its electrocatalytic performance towards overall water splitting worked as both cathode and anode achieved a quite low potential of 1.56 V (10 mA cm^?2).     

Mo-incorporated three-dimensional hierarchical ternary nickel-cobalt-molybdenum layer double hydroxide for high-efficiency water splitting

Flowers-like 3D hierarchical ternary NiCoMo-layered double hydroxide (NiCoMo-LDH) spheres have been fabricated in substrate-free route via a one-pot hydrothermal method and utilized as efficient electrocatalysts for the OER and HER. The well-structured 3D hierarchical flowers were composed of numerous two-dimensional nanosheets, which inherently possess considerable electrochemical active sites, thereby enhancing catalytic activity. NiMo and CoMo binary LDHs, with similar morphology, were also prepared to illustrate the efficiency of the ternary LDH. The results indicate higher electrocatalytic activity for the ternary LDH as compared to binary LDHs under alkaline conditions. The NiCoMo-LDH required an overpotential as low as 202 and 93 mV to deliver a constant anodic and cathodic current density of 10 mA cm^?2 for the OER and HER, respectively. Furthermore, the NiCoMo-LDH exhibited remarkable HER activity, affording a low overpotential of 198 mV at a current density of ?100 mA cm^?2. Moreover, it could offer a stable current density of 10 mA cm^?2 for overall water splitting at 1.62 V in 1 M KOH with long-term stability for 20 h. The double-layer capacitance (C_dl) value indicated that the NiCoMo-LDH significantly influenced interface conductivity and the electrochemical active surface area. The ternary NiCoMo-LDH electrode yielded low Tafel slope values of 54 and 51 mVdec^?1 for the OER and HER. Owing to the efficient incorporation of Ni, Co, and Mo in a layered structure, synergetic effect, and high electrochemical surface area, the NiCoMo-LDH exhibited remarkable electrocatalytic activity. Such eco-friendly ternary LDHs can be used in rechargeable metal–air batteries for industrial applications.     

Facile synthesis of self-supported intertwined columnar NiCoP as a high efficient electrocatalyst for hydrogen evolution reaction

A new self-supported nickel-cobalt phosphide (NiCoP) on Ni foam (NiCoP/NF) is fabricated by simple immersion in Co(NO₃)₂ solution followed by subsequent phosphorization. NiCoP/NF displays intertwined and porous columnar morphology derived from topological transformation of corresponding columnar amorphous hydroxides precursor. NiCoP/NF manifests the most prominent hydrogen evolution reaction (HER) performance in both 0.5 M H₂SO₄ and 1 M KOH with the overpotentials of 49 and 57 mV to achieve 10 mA cm^?2, respectively. Also, NiCoP/NF showed excellent oxygen evolution reaction (OER) performance, requiring 256 mV to achieve 10 mA cm^?2, even superior to that of RuO₂ and IrO₂. Such impressive HER performance of NiCoP/NF is mainly attributed to the collective effects of enlarged surface area and enriched exposed active sites, affording faster charge transfer kinetic in HER process. This simple immersion method offers a new insight to design cost-effective and efficient electrocatalysts for large scale application.     

Hollow hexagonal NiSe–Ni3Se2 anchored onto reduced graphene oxide as efficient electrocatalysts for hydrogen evolution in wide-pH range

Integrating transition metal complexes with carbon-based materials, especially graphene, is a useful strategy for synthesizing effective hydrogen evolution catalysts. Herein, we report a design of hollow hexagonal NiSe–Ni₃Se₂ nanosheets grown on reduced graphene oxide (NiSe–Ni₃Se₂/rGO) by a simple hydrothermal method as an effective catalyst for hydrogen evolution reaction (HER) in the full pH range. In 0.5 M H₂SO₄, the NiSe–Ni₃Se₂/rGO possesses 112 mV to achieve 10 mA cm^?2 and a small Tafel slope (61 mV dec^?1). In 1.0 M PBS and 1.0 M KOH, the overpotentials are 261 and 188 mV at 10 mA cm^?2, and Tafel slopes are 103 and 92 mV dec^?1, respectively. Meanwhile, it owns good cycle stability and durability over 20 h in the whole pH range (0-14). In all solutions, the HER performance of NiSe–Ni₃Se₂/rGO is better than that of NiSe–Ni₃Se₂. This is because the rGO substrate accelerates the electron transfer and improves the electrical conductivity, increasing HER activity of catalyst.     

Nanostructural Co–MoS2/NiCoS supported on reduced Graphene oxide as a high activity electrocatalyst for hydrogen evolution in alkaline media

There are many tremendous challenges to enhance the hydrogen evolution reaction (HER) activity of MoS₂. In this study, nanoflower-like Co–MoS₂/NiCoS structure supported on reduced Graphene Oxide (rGO) was rationally developed via a simple hydrothermal route, where the synergistic regulations of both interface structural and electronic conductivity were successfully presented by using controllable interface engineering and Co metal ions doped into MoS₂ nanosheets. Ascribed to the 3D flower-like nanostructure with massive active sites, the interface coupling effect between MoS₂ and Ni–Co–S phase, and Co-doped MoS₂ can modulate its surface electronic density. The optimal Co–MoS₂/NiCoS/rGO hybrid exhibits excellent HER activity in 1.0 M KOH, with a small overpotential (η₁₀, 84 mV) at 10 mA cm^?2 and a low Tafel slope (46 mV dec^?1), accompanied by good stability. This work provides an effective route to produce other electrocatalysts based on interface structure and electronic conductivity engineering for HER in the future.     

Phosphorus-doped nickel selenides nanosheet arrays as highly efficient electrocatalysts for alkaline hydrogen evolution

Earth-abundant transition-metal dichalcogenides are considered as promising electrocatalysts to accelerate the hydrogen evolution reaction （HER）. Among them, the pyrite nickel diselenide (NiSe₂) has been received special attention due to its low cost and high conductivity, but it suffers a poor HER performance in alkaline media possibly attributed to its inadequate hydrogen adsorption free energies. Here, we report a novel P-doped NiSe₂ nanosheet arrays anchored on the carbon cloth with an obviously optimized HER performance. The catalyst only needs a low overpotential of 86 mV at a current density of 10 mA cm^?2 and a Tafel slop of 61.3 mV dec^?1，as well as maintains a long-term durability for 55 h in 1.0 M KOH, which is superior to the pristine NiSe₂ (135 mV@10 mA cm^?2) and most recently reported non-noble metal electrocatalysts. The XRD, EDS, TEM and XPS results validated the successful doping of P element into NiSe₂ nanosheet, while the density functional theory (DFT) calculation demonstrated the P doping can optimize the electronic structures and the hydrogen adsorption free energy of NiSe₂. This work thus opens up new ways for rationally designing high-efficient HER electrocatalysts and beyond.     

MOF-derived cobalt manganese phosphide as highly efficient electrocatalysts for hydrogen evolution reaction

Hydrogen is considered as a viable alternative to traditional fossil fuels. Hydrogen evolution reaction (HER) by electrochemical water splitting is the most reliable and effective way for the sustainable production of pure hydrogen. The design and synthesis of highly active and stable non-noble-metal-based electrocatalysts is the core of the large-scale application of this technology. Herein, peony petal-like CoMnP/NF nanomaterials growing on nickel foam (NF) are prepared via facile hydrothermal and phosphorization methods. The results showed that CoMnP/NF had excellent HER activity in acidic and alkaline media. In 0.5 M H₂SO₄, CoMnP/NF only needed 66.6 mV overpotential to drive the current density of 10 mA cm^?2, with a Tafel slope of 38.8 mV dec^?1. In addition, a particularly low overpotential of 53.9 mV and Tafel slope of 63 mV dec^?1 are required to achieve the same current density in the 1 M KOH electrolyte. Meanwhile, the electrocatalyst showed good stability after 1000 cyclic voltammetry tests and 12 h I-T tests. In the 1 M KOH electrolyte, the current density of 10 mA cm^?2 achieved with only 1.70 V battery voltage, and the electrocatalyst showed excellent stability. The performance of CoMnP/NF can be attributed to the synergistic effect between Co and Mn atoms and the high electrochemical surface area (ECSA). This study provides a valuable strategy for the synthesis of non-precious metals and high-performance catalytic materials.     

Electroless deposition synthesis of composite catalysts Ni-Fe-P-WO3/NF with superior oxygen evolution performance

The proper construction of high efficiency, low-cost, earth-abundant oxygen evolution reaction (OER) catalyst is essential for hydrogen formation by water splitting. A novel electrocatalyst with highly active OER performance was manufactured by a simple electroless deposition method of Ni-Fe-P-WO₃ on nickel foam (NF). Benefiting from outstanding mass transfer capability of Ni-Fe-P-WO₃/NF heterogeneous structure, abundance of active sites in the amorphous architecture and etc., the Ni-Fe-P-WO₃/NF shows extremely superb electrocatalytic properties compare to noble metal catalyst IrO₂/NF for OER, which needs an overpotential of only 218 mV in 1.0 M KOH solution to achieve the current density of 10 mA cm^?2. It also has remarkable OER activity at high current density that only needs 298 mV to attain 100 mA cm^?2 current density. Moreover, the Ni-Fe-P-WO₃/NF has low Tafel slope of 42 mV dec^?1. This study offers a novel approach to the production of OER multiphase electrocatalysts from oxides and alloys.     

Rational design of free-standing 3D Cu-doped NiS@Ni2P/NF nanosheet arrays for hydrogen evolution reaction

Using low cost and high efficiency non-precious bimetallic phosphosulphide as electrocatalyst for hydrogen evolution reaction (HER) is not only convenient but also environment-friendly for industrial production. Therefore, we propose a simple and efficient method to prepare a series of Cu-doped bimetallic phosphosulphide nanosheet arrays on nickel foam (CuNiS@Ni₂P/NF). The CuNiS@Ni₂P/NF exhibits the superior HER performance with appropriate doping amount of Cu. It just needs a potential of 144 mV to obtain the current density of 10 mA cm⁻² in 1.0 M KOH, which is smaller than that of CuNiS@Ni₂P/NF-0.25 (206 mV) and CuNiS@Ni₂P/NF-0.125 (219 mV). The excellent HER performance of CuNiS@Ni₂P/NF nanosheet arrays can be ascribed to: (i) the moderate Cu-doped effectively optimized the electronic structure and morphology of the electrocatalyst; (ii) typical nanosheet arrays structures exposing more active sites; (iii) the high immanent activity excited by the multi-component synergy.     

Cobalt–Iron nanoparticles encapsulated in mesoporous carbon nanosheets: A one-pot synthesis of highly stable electrocatalysts for overall water splitting

Advancement of cost-effective, highly efficient and non-noble metal-based bifunctional electrocatalysts is considered an attractive approach to overcome the energy defect and environmental pollution challenges. Herein, this study presents a simple one-pot approach to synthesize cobalt-Iron nanoparticles encapsulated in mesoporous carbon nanosheets (Co₃Fe₇@CNSs) by the pyrolysis method. The Co₃Fe₇@CNSs-750/4h electrocatalyst exhibits a notable performance, low overpotential of 181 and 301 mV at a current density of 10 mA cm^?2 and small Tafel slope of 124.8 and 38.59 mV dec^?1, large active surface area 18.20 and 21.18 mF cm^?2, and low charge transfer resistance 4.92 and 9.42 Ω for hydrogen and oxygen evolution reactions, respectively, in 1.0 M KOH. Overall water splitting, with the set-up of two-electrode cells acquires the 10 mA cm^?2 of current density at 1.610 V in 1.0 M KOH. The combined structure of cobalt-iron nanoparticles encapsulated in carbon nanosheets; it could enhance the surface area and, provide more active sites that improve the overall catalytic activity. Not only this but also the synergistic effect due to different temperature treatments which significantly influenced the structural formation. However, the major involvement of this study is concerned with the production of economical non-noble metal-based electrocatalysts at an industrial scale for renewable energy to sustainability.     

Self-supported iron-doped nickel sulfide as efficient catalyst for electrochemical urea and hydrazine oxidation reactions

The electrochemical oxidation of urea and hydrazine over self-supported Fe-doped Ni₃S₂/NF (Fe–Ni₃S₂/NF) nanostructured material is presented. Among the various reaction conditions Fe–Ni₃S₂/NF-2 prepared at 160 °C for 8 h using 0.03 mM Fe(NO₃)₃ shows the best results for the hydrazine and urea oxidation reactions. The potential values of 0.36, 1.39, and 1.59 V are required to achieve the current density of the 100 mA cm^?2 in 1 M hydrazine (Hz), 0.33 M urea, and 1 M KOH electrolyte, respectively. The onset potential in 1 M KOH, 0.33 M Urea +1 M KOH, and 1 M Hz + 1 M KOH values are 1.528, 1.306, and 0.176 respectively. The Fe–Ni₃S₂/NF-2 shows stable performance at 10 mA cm^?2 until 50 h and at 60 mA cm^?2 over the 25 h. A cell of PtC//Fe–Ni₃S₂/NF-2 requires the potential of 0.49, 1.46, and 1.59 V for the hydrogen production in 1 M Hz + 1 M KOH, 0.33 M Urea +1 M KOH, and 1 M KOH electrolyte, respectively, at a current density of 10 mA cm^?2, and almost 90% stable for the hydrogen production over the 80 h in all electrolytes. The improvement of the chemical kinetics of urea and hydrazine oxidation is due to the synergistic effect of the adsorption and fast electron transfer reaction on Fe–Ni₃S₂/NF-2. The doped Fe ion facilitates the fast electron transfer and the surface of Ni₃S₂ support to the urea and hydrazine molecule adsorption.     

One-pot solvothermal synthesis of Co2P nanoparticles: An efficient HER and OER electrocatalysts

Development of an inexpensive electrocatalyst for hydrogen evolution (HER) and oxygen evolution reactions (OER) receives much traction recently. Herein, we report a facile one-pot ethyleneglycol (EG) mediated solvothermal synthesis of orthorhombic Co₂P with particle size ~20–30 nm as an efficient HER and OER catalysts. Synthesis parameters like various solvents, temperatures, precursors ratios, and reaction time influences the formation of phase pure Co₂P. Investigation of Co₂P as an electrocatalyst for HER in acidic (0.5 M H₂SO₄) and alkaline medium (1.0 M KOH), furnishes low overpotential of 178 mV and 190 mV, respectively to achieve a 10 mA cm^?2 current density with a long term stability and durability. As an OER catalyst in 1.0 M KOH, Co₂P shows an overpotential of 364 mV at 10 mA cm^?2 current density. Investigation of Co₂P NP by XPS analysis after OER stability test under alkaline medium confirms the formation of amorphous cobalt oxyhydroxide (CoOOH) as an intermediate during OER process.     

Bifunctional electrocatalysts of CoFeP/rGO heterostructure for water splitting

Bifunctional non-precious electrocatalysts with high performance are highly desired for renewable energy but remain challenging. Herein, a CoFeP/rGO heterostructure was rational developed based on the synergistic effect, including superior conductivity, increased catalytic active sites of rGO support and the regulated electron distribution of bimetallic phosphide. At a current of 10 mA cm^?2, the CoFeP/rGO-2 composite exhibits excellent HER activity with low overpotentials of 101 mV and 76 mV in 1.0 M KOH and 0.5 M H₂SO₄ electrolyte, respectively. And highly active alkaline OER performance was provided with an overpotential of only 275 mV to reach a current density of 10 mA cm^?2. By the way, the CoFeP/rGO-2 electrode showed a pleasured working voltage of 1.58 V for overall water splitting in alkaline environment. More importantly, the long term durability and higher stability of the catalysts demonstrated their feasibility of bimetallic phosphide/rGO system as bifunctional electrocatalysts.     

Facile fabrication of flower-like CuS/MnCO3 microspheres clusters on nickel foam as an efficient bifunctional catalyst for overall water splitting

Utilizing the abundant elements on earth to product inexpensive, high-active and stable catalysts for water splitting is very significant but still remains serious challenge to produce hydrogen. Herein, heterostructures of CuS/MnCO₃ on nickel foam substrate are firstly successfully synthesized via a facile one-step hydrothermal strategy. The as-prepared electrocatalyst displays an enhanced oxygen evolution reaction (OER) performance in alkaline conditions with a minimum overpotential of 70 mV and a small Tafel slope of 42.5 mV/dec to achieve 10 mA cm^?2. The catalyst also exhibits an excellent HER activity with a low overpotential of 143 mV and the Tafel slope of 51.4 mV/dec to acquire 10 mA cm^?2 in 1.0 M KOH. Moreover, when the CuS/MnCO₃//CuS/MnCO₃ electrode is applied for the overall water splitting, the electrolyzer cell device affords 10 mA cm^?2 at a relative low voltage of 1.43 V, which is one of the best catalysts ever reported. In stability test, its activity first decreases and then remains stable in 1 M KOH solution for about 10 h, indicating that the electrode has good electrochemical stability. Density functional theory calculations (DFT) show that MnCO₃ has a stronger adsorption energy for water than CuS does, indicating that MnCO₃ is a real active center and CuS plays a certain synergistic effect. This work not only provides a low-cost and efficient bifunctional catalyst for water splitting technology, but also extends the application of bifunctional catalyst based on transition metal sulfide and carbonate compound.