Determination of phthalate esters in wine using solid-phase extraction and gas chromatography–mass spectrometry

A method for the determination of six phthalate esters in wine samples has been developed. The phthalates were extracted from wine samples with an optimised solid-phase extraction method on C18 column and quantification was achieved via gas chromatography coupled with a mass spectrometer. The method was linear between 0.015 and 5.000 μg mL⁻¹ for DMP, DEP and DEHP and between 0.018 and 5.000 μg mL⁻¹ for iBP, DBP and BBP. The LOQs of DMP, DEP and DEH were 0.024 μg mL⁻¹ while those of iBP, DBP and BBP were 0.029 μg mL⁻¹. The intra-day method repeatability was between 10% and 15% RSD, whereas the inter-day method repeatability was between 13% and 21% RSD. A survey was performed on white and red wines (n = 62) from the market, winemakers and an experimental pilot plant. All the analysed samples were phthalate contaminated. Commercial wine showed higher detection frequency and level of total phthalate, DBP and BBP than those produced in a pilot plant. iBP and DEHP concentrations were similar in all the groups of samples. iBP concentration was higher in red wines than in white ones.     

Feasibility and application of liquid–liquid extraction combined with gas chromatography–mass spectrometry for the analysis of phenolic acids from grape polyphenols degraded by human faecal microbiota

In this study the feasibility of a LLE–GC–EI-MS method for the analysis of 43 phenolic acids belonging to different chemical structure families which have been described in the literature as microbial-derived metabolites after consumption of dietary polyphenols was proved. In addition, the method was applied for the characterisation of phenolic metabolites resulting from the incubation, in anaerobic conditions, of a commercial grape seed extract (GSE) and their corresponding flavan-3-ol monomeric (GSE-M) and oligomeric (GSE-O) fractions with human faeces from healthy volunteers (n = 3). The method showed average values of repeatability and reproducibility of 5.0% and 6.3%, respectively, adequate and low detection (1.8–30.8 μg L⁻¹) and quantification limits (6.0–102.8 μg L⁻¹) and good recovery values (95%, as average value). A total of 27 phenolic acids were identified in the faecal solutions after incubation with the grape seed extracts. In general, faecal samples incubated with GSE and GSE-M (monomeric fraction) yield a higher formation of phenolic acids compared to the samples incubated with the oligomer fraction (GSE-O).     

Biogenic amines content as a measure of the quality of wines of Abruzzo (Italy)

Aim of this research was to study the effect of some agronomic and oenological factors on the content of biogenic amines as quality index of sixty-five Abruzzo wines. Sum of amines was found to be decreasing in the order: red (19.3 ± 12.8 mg L⁻¹), rosé (9.20 ± 6.34 mg L⁻¹), white (7.67 ± 3.84 mg L⁻¹) wine. Significant differences in relationship among amines levels and chemical and chemico-physical characteristics of red, white and rosé wine are due to their different biotechnological process and winemaking. Besides the aging treatment, influential seems to be the effect of the winery, regardless of the area in which it is situated.     

Analysis,occurrence and potential sensory significance of aliphatic aldehydes in white wines

An analytical method was developed for C8–C11 aliphatic aldehydes in wine consisting of solid phase extraction (SPE) followed by multidimensional gas chromatography/mass spectrometry (MDGC/MS). The method achieves low detection limits (<30 ng L⁻¹), minimises problems of blank contamination and shows high repeatability (RSD% < 5%), but strong matrix effects were noticed during validation. These matrix effects were attributed to strong interactions between aliphatic aldehydes and other matrix elements. Three fractions were differentiated: free extractable aldehydes, aldehydes bound in hydrophilic complexes (extractable in the presence of acetaldehyde) and aldehydes bound in hydrophobic complexes (extractable in the presence of heptanal). The distribution of the three aldehyde species in wine samples was estimated using a surrogate (3,5,5-trimethylhexanal) and an internal standard (methyl phenylacetate) in double determinations (directly and after incubation with 1000 mg L⁻¹ acetaldehyde). These components had a clear additive sensory effect in mixtures and odour thresholds in wine were very low. This caused that although they were present at very low levels, in 2 out of 24 white wine samples were clearly above threshold, and in six more were at levels close to threshold. These results suggest that these components are active contributors to the citrus fruit notes of some white wines.     

LC–MS/MS analysis of phenols for classification of red wine according to geographic origin,grape variety and vintage

A rapid LC–MS/MS method for quantification of phenols and polyphenols in authentic wine samples with unrivalled sensitivity was developed. Excellent limits of detection in the low μg L⁻¹ range were achieved. Reversed phase HPLC employing sub-2 μm particles as stationary phase allowed high-throughput analysis with analysis times of 10 min for 11 compounds. The phenolic pattern was assessed in 97 authentic wine samples (stored under identical conditions without further treatment or modification) comprising eleven geographical Austrian regions, six grape varieties and five vintages. Canonical discriminant analysis was applied to the data set showing the suitability of the (poly)phenolic spectrum for classification of the wine samples. The method allowed a geographic discrimination of several grape varieties and a grape variety based discrimination of four regions. As a novel finding excellent (poly)phenol-based differentiation of the five investigated vintages (2003–2007) was achieved.     

Differentiation of Greek red wines on the basis of grape variety using attenuated total reflectance Fourier transform infrared spectroscopy

Mid-infrared spectroscopy combined with appropriate software was used in an attempt to differentiate Greek red wines of different varietals origin, including the cultivars Agiorgitiko (Nemea-Peloponnesus), Xinomavro (Naousa-Central Macedonia) and Merlot from Greece. Extract of wine phenolic components were investigated by attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy. The wine extracts were obtained by solid-phase extraction with C-18 columns and elution by methanol containing 0.01% hydrochloric acid. Libraries of spectra were created using sample from each wine variety. Spectra of unknown wine extracts were recorded and compared with those of the wine libraries and the rate of affinity (the match value) was measured automatically using the appropriate software (OMNIC ver. 7.3). The spectral region 1800–900 cm⁻¹ was used to ‘fingerprint’ wine on the basis of grape variety. This simple and fast method of analysis showed that wines from different grape varieties can be differentiated between them.     

Effect of modifiers for As,Cu and Pb determinations in sugar-cane spirits by GF AAS

Palladium plus magnesium nitrates with and without Ir, Ru and W were evaluated for the simultaneous determination of As, Cu and Pb in cachaça by graphite furnace atomic absorption spectrometry. For 20 μL of sample, 5 μL Pd(NO₃)₂ and 3 μL Mg(NO₃)₂ dispensed together onto the Ir-coated platform of the THGA, analytical curves in the 0–30.0 μg L⁻¹ As, 0–1.50 mg L⁻¹ Cu and 0–60.0 μg L⁻¹ Pb were built up and typical linear correlation coefficients were always better than 0.999. The limit of detection was 1.30 μg L⁻¹ As, 140 μg L⁻¹ Cu and 0.90 μg L⁻¹ Pb. As, Cu and Pb contents in 10 cachaça samples agreed with those obtained by ICP-MS. Recoveries of spiked samples varied from 96% to 106% (As), 97% to 112% (Cu) and 92% to 108% (Pb). The relative standard deviation (n = 12) was typically 2.7%, 3.3% and 1.9%.     

Arsenic speciation in white wine by LC–ICP–MS

This study deals with As speciation in white wine. Arsenic species were selectively determined by liquid chromatography–inductively coupled plasma–mass spectrometry (LC–ICP–MS). Separation of As species was performed using an anion exchange column with ammonium phosphate solution (pH 6.00) as mobile phase. Samples of 14 white wine produced in South America were analysed. They were 10-fold diluted in the mobile phase prior to analysis by LC–ICP–MS. Accuracy was evaluated by recovery tests, whereas As species recovery ranged from 95% to 106%. Additionally, the sum of arsenic species concentration found by LC–ICP–MS was in agreement with the total arsenic concentration determined by ICP–MS after sample digestion. Arsenic species detected were arsenite [As(III)], arsenate [As(V)] and dimethylarsinic acid (DMA). As(III) and As(V) were detected in all analysed wine samples and DMA was detected only in wines produced in Argentina. Results for As determination in samples were from 2.9 to 10.3, 8.6 to 17.8, and <0.45 to 1.07 μg L⁻¹ for As(III), As(V) and DMA, respectively.     

Pre-bottling use of dehydrated waste grape skins to improve colour,phenolic and aroma composition of red wines

Different dehydrated waste grape skins from the juice industry were added into aged and young red wines as an innovative way of compensating for colour loss before bottling. After addition of grape skins, colour intensity of wines increased a mean 11% and a maximum of 31% with predominance of the red component. Total polyphenols mean increase was 10% with a maximum value of 20%. Analysis of low molecular weight phenolic compounds by HPLC–DAD showed a significant (p < 0.05) content increase of the bioactive compounds gallic acid, (+)-catechin, (−)-epicatechin, and (E)-resveratrol. Anthocyanins content also increased at an average of 50 mg/l. The volatile profile of wines analysed by SBSE–GC–MS was only moderately influenced by the treatments. Mixtures of dehydrated waste grape skins were useful to improve the colour and polyphenol profile of red wines, considering them a useful tool for correcting colour loss before bottling.     

Development and validation of a simple analytical method for the determination of 2,4,6-trichloroanisole in wine by GC–MS

A novel method for the residue analysis of wine spoilage compound 2,4,6-trichloroanisole is reported. Wine (60 ml) was extracted with 2 ml toluene in presence of 24 g MgSO₄ and 6 g NaCl. Cleanup of the toluene phase by dispersive solid phase extraction with mixture of 100 mg CaCl₂, 25 mg primary secondary amine and 50 mg MgSO₄ was effective in minimising co-extractives and matrix effects. Time-of-flight and tandem mass spectrometric parameters were optimised to achieve linearity over 0.25–500 ng ml⁻¹ and method detection limit 0.0083 ng ml⁻¹ which is well below the odour threshold of 0.04 ng ml⁻¹. Recoveries at 0.04, 0.2 and 0.8 ng ml⁻¹ were within 80–110% (±8%). The method was reproducible when tested for Argentinean wines with intra-laboratory Horwitz ratios being <0.20 in white and red wines at both the laboratories of India and Argentina. The method could be successfully applied for incurred wine samples.     

Synthesis and application of a new functionalized resin for use in an on-line,solid phase extraction system for the determination of trace elements in waters and reference cereal materials by flame atomic absorption spectrometry

The synthesis and characterization of the resin Amberlite XAD-4 functionalized with 2,6-pyridinedicarboxaldehyde and its application in an on-line system for the preconcentration of cadmium, cobalt, copper, lead and manganese prior to determination using flame atomic absorption spectrometry (FAAS) is proposed. Metal ions retained on the modified resin were eluted using 1.0 mol L⁻¹ HNO₃ solution and aspirated directly to the nebulizer–burner system of a FAAS instrument using a flow injection system. Detection limits (3σ) were determined to be 0.13 μg L⁻¹ for Cd, 0.29 μg L⁻¹ for Cu, 0.23 μg L⁻¹ for Mn, 0.58 μg L⁻¹ for Co and 2.19 μg L⁻¹ for Pb using a 10 mL of water sample loading volume. The limits of detection would be 100 times higher with units of μg kg⁻¹ for the solid samples in which their dilution ratios as (volume/weight) were 100. Enrichment factors ranged from 23.6 to 28.9 (for Co and Mn, respectively). The proposed method was successfully applied to determination of the analytes in natural water samples and certified reference materials.     

Occurrence of patulin and its dietary intake through apple juice consumption by the Spanish population

A survey was conducted to determine levels and dietary intake of Patulin (PAT) from apple juices consumed in Spain. One hundred samples of apple juice were bought from distinct supermarkets. PAT was extracted by a liquid–liquid extraction technique and analysed with a micellar electrokinetic chromatography (MEKC) method. 66% of the samples contained PAT over the limit of detection of the method (0.7 μg L⁻¹). The PAT apple juice mean and median levels obtained were 19.4 and 4.8 μg L⁻¹, respectively, in a range between 0.7 and 118.7 μg L⁻¹. In 11% of the samples, PAT contamination exceeded the maximum permitted level of 50 μg L⁻¹ established by the EU regulation. In Spain, no significant variations were observed with respect to data published 15 years ago.     

Ethyl-carbamate determination by gas chromatography–mass spectrometry at different stages of production of a traditional Brazilian spirit

Ethyl carbamate (EC), which is probably carcinogenic to humans, can be produced during the alcoholic fermentation of sugar-cane juice to give cachaça. The stages to produce cachaça are obtainment of sugar-cane juice, sugar-cane fermentation to wine, and obtainment of distilled fractions and residue. In order to investigate the presence of EC in the wine and in the fractions of the distillation process, as well as in the vinasse (the residue left after distillation), gas chromatography–mass spectrometry was employed. After the fermentation phase, the wine showed an average content of 122 mg L⁻¹ of EC. Average EC content in distilled fractions was 59.7 mg L⁻¹ for head, 52 μg·L⁻¹ for heart and 1.57 mg L⁻¹ for tail. EC content was 53.1 mg L⁻¹ for vinasse. The results showed that it is essential to separate the head and tail fractions to ensure cachaça quality, with respect to EC content.     

Potentiometric sensor for sorbic acid determination in food products

The construction, evaluation and application of a new potentiometric sensor, namely, Pt|Hg|Hg₂(SOB)₂ |Graphite, where SOB stands for sorbate ion, are described. This electrode has a wide linear dynamic range between 5.0 × 10⁻⁷ and 1.0 × 10⁻² mol L⁻¹ with a near-Nernstian slope of (−58.6 ± 1.3) mV decade⁻¹ and a detection limit of 4.3 × 10⁻⁷ mol L⁻¹. The potentiometric response is independent of the pH of the solution in the pH range 6.0–9.0. The electrode is easily constructed at a relatively low-cost with fast response time (within 15–30 s) and can be used for a period of 4 months without significant change in its performance characteristics. The proposed sensor displayed good selectivities over a variety of other anions (carboxylates and inorganic anions). The potentiometric sensor was successfully applied to the determination of sorbic acid in real food samples, that is, soft drinks, skim yogurts, jams and sauces.     

Determination of aflatoxins in eggs,milk, meat and meat products using HPLC fluorescent and UV detectors

Raw and pasteurised sheep’s, cow’s and goat’s milk, eggs, and beef samples from different local markets in Jordan were collected during a period of 5 months (January through May 2007) and examined for aflatoxins B1(AFB1), B2(AFB2), G1(AFG1), G2(AFG2), M1(AFM1) and M2(AFM2). The samples were analysed with high performance liquid chromatography (HPLC) using UV and Fluorescent detectors. The analysed samples of milk collected in January were found to contain 0.56 μg L⁻¹ AFM1 and 0.1 μg L⁻¹ AFM2 whilst, the concentration of AFM1 and AFM2 was < 0.05 μg L⁻¹ for milk samples collected between March and May. The AFB1, AFB2, AFG1 and AFG2 contents in the analysed food products ranged from 1.10 to 8.32 μg L⁻¹ and 0.15 to 6.36 μg L⁻¹ in imported and fresh meat samples collected during March, respectively. The mean recovery for the HPLC method was 92% to 109% and the quantification levels were 50 ng L⁻¹ for AFM1 and AFM2. The AFM1 was found in 10% of the tested samples with concentrations between 0.08 and 1.1 μg kg⁻¹ and AFM2 was only found in 1.82% of the tested samples with a level of 0.1 μg kg⁻¹. The AFM1 levels in the examined foods were higher than the maximum level of AFM1 in liquid milk set by the European Community and Codex Alimentarius of 50 ng L⁻¹.     

Distribution and migration study of pesticides between peel and pulp in grape by online gel permeation chromatography–gas chromatography/mass spectrometry

A multi-residue method for the analysis of 175 pesticides was developed by online gel permeation chromatography–gas chromatography/mass spectrometry (GPC–GC/MS) to study pesticide distribution and migration between peel and pulp in grape. The separated peel and pulp samples were extracted by acetonitrile after fortified with chlorpyrifos-d₁₀ isotope internal standard. The extract was first purified by solid phase distribution sorbent of primary secondary amine (PSA) and then detected by online GPC–GC/MS. At the spiking levels of 10, 50 and 200 μg kg⁻¹, 73.7%, 94.3% and 98.9% of the pesticides, respectively, presented recoveries between 70% and 120%. The ratios were 91.4%, 94.9% and 92.0%, respectively, for the relative standard deviations (RSDs) bellow 15%. Limits of detection (LODs) for the pesticides in pulp were below 10 μg kg⁻¹. Pesticides were separated to four groups according to the distribution ratios (peel/whole grape) of 100%, 80–99.9%, 50–80% and 0–50% in peel. Relationship between the pesticide distribution and corresponding regulation of EU maximum residue level (MRL) was discussed. Six factors influencing the pesticides distribution and migration between peel and pulp were discussed. Weak linear correlation between the pesticide solubility in water (20 °C) and the distribution ratios (lowest and average) in peel was found for most of the detected pesticides with solubility less than 200 mg L⁻¹.     

Effect of high pressure treatments on the physicochemical properties of a sulphur dioxide-free red wine

The application of high hydrostatic pressure (HHP) in winemaking for substitution of the use of sulphur dioxide is still at a very early stage of development, since knowledge about the effect on physicochemical and sensorial characteristics of the wine during storage is very scarce. In this work, the evolution of colour, antioxidant activity and total phenolic compounds of SO₂-free red wines treated by HHP and aged in bottles was followed for 12 months. The pressurised wines were compared with wine samples prepared with addition of 40 ppm of SO₂ and without any of these two treatments. After 12 months, the pressurised wines presented higher values of CIELab parameters (a^∗, b^∗, and L^∗) and a lower monomeric anthocyanin content (45–61%) when compared to the unpressurised ones. The pressurised wines showed also a better global sensorial assessment, with the pressure treatments imparting aged-like characteristics to the wines. The wine deposits of pressurised wines had higher total phenolic content, namely proanthocyanidins (3- to 10-fold). The results demonstrate that HHP can influence long term red wine physicochemical and sensorial characteristics, hypothesised to be due to an increase of condensation reactions of phenolic compounds, forming compounds with higher degree of polymerisation that became insoluble in wine along storage.     

Pico molar assay of riboflavin in human urine using voltammetry

Using a new type of DNA and carbon nano tube (CNT) mixed paste electrode using cyclic and square wave anodic stripping voltammetric (SWASV) methods, this study presents an assay of riboflavin (RF) under optimum conditions. Results of the experiment yielded a low working concentration range of nanograms with 1–10 and 10–170 ng L⁻¹ and 5–105 μg L⁻¹, at an accumulation time of 80 s in a 0.1 M H₃PO₄ electrolyte solution. A relative standard deviation of 30 μg L⁻¹ was observed at an accuracy level of 0.1164% (n = 15) under optimum conditions. The detection limit (S/N) was pegged at 0.2 ng L⁻¹ (5.31 × 10⁻¹³ mol L⁻¹ RF). The proposed method was successfully applied to an actual human urine and drug sample, and can be applied to assays of other biological samples.     

Speciation of organic and inorganic selenium in selenium-enriched rice by graphite furnace atomic absorption spectrometry after cloud point extraction

A new method was developed for the determination of organic and inorganic selenium in selenium-enriched rice by graphite furnace atomic absorption spectrometry detection after cloud point extraction. Effective separation of organic and inorganic selenium in selenium-enriched rice was achieved by sequentially extracting with water and cyclohexane. Under the optimised conditions, the limit of detection (LOD) was 0.08 μg L⁻¹, the relative standard deviation (RSD) was 2.1% (c = 10.0 μg L⁻¹, n = 11), and the enrichment factor for selenium was 82. Recoveries of inorganic selenium in the selenium-enriched rice samples were between 90.3% and 106.0%. The proposed method was successfully applied for the determination of organic and inorganic selenium as well as total selenium in selenium-enriched rice.