A novel multichromic copolymer via electrochemical copolymerization of (S)-1,1′-binaphthyl-2,2′-diyl bis(N-(6-hexanoic acid-1-yl) pyrrole) and 3,4-ethylenedioxythiophene

Copolymer based on (S)-1,1′-binaphthyl-2,2′-diyl bis(N-(6-hexanoic acid-1-yl) pyrrole) (BPL) and 3,4-ethylenedioxythiophene (EDOT) is electrochemically synthesized and characterized. The comonomers exhibit relatively closer onset oxidation potentials, implying that the electrochemical copolymerization is relatively easy to be achieved. Electrochemical methods, FTIR, ¹H NMR and UV-vis analysis confirm that the resulting polymer is a copolymer rather than a blend or a composite of the respective homopolymers. Spectroelectrochemical analysis reveals that the copolymer film has distinct electrochromic properties from that of the BPL homopolymer film and shows six different colors under various potentials. At the neutral state of the copolymer, the π → π* transition absorption peak is located at 535 nm and E_g is calculated as 1.78 eV. The copolymer film shows a maximum optical contrast (ΔT%) of 31% and a switching time of 1.2 s which are higher and faster than those of the homopolymer of BPL (PBPL, 7.8% and 2 s). The new multichromic copolymer is thermally stable up to 345 °C and is electrochemically stable up to 1.39 V. SEM images illustrate that the copolymer film presents a much smoother surface than that of the respective homopolymers.     

The mediation reaction between the external couple Ferri/Ferrocyanide and Os(II) bipyridile poly-vinylpyridile films coated onto glassy carbon electrodes

The oxidation-reduction of the Ferri/Ferrocyanide couple in solution onto modified glassy carbon Rotating Disk Electrodes (RDE) covered by Os(II) bipyridile poly-vinylpyridile (OsBPP) polymer was studied at room temperature. Steady state polarization curves were carried out as a function of the rotation speed, the polymer thickness and the concentration of redox centers within the polymer. This system has the characteristic that the formal redox potentials of both the external redox couple (E⁰′(Fe(CN)₆^3−/4−) = + 0.225 V vs. SCE) and the mediator polymer (E⁰′(OsBPP) = 0.260 V vs. SCE) lie very close. It is demonstrated that diffusion of the Ferri/Ferrocyanide inside the polymer can be ruled out. Since the processes of charge transfer at the metal/polymer and the mediating reaction are fast, the experimental results can be interpreted in terms of a kinetics in which the charge transport in the polymer or the diffusion in the solution may be the rate determining step, according to the experimental conditions. A simple model is considered that allows interpreting the experimental results quantitatively. Application of this model allows the determination of the diffusion coefficient of the electrons within the film, D_e ≈ 10⁻¹⁰ cm² s⁻¹.     

Ion-exchange voltammetry of tris(2,2′-bipyridine) nickel(II), cobalt(II), and Co(salen) at polyestersulfonated ionomer coated electrodes in acetonitrile: Reactivity of the electrogenerated low-valent complexes

The electrochemical behaviour of [Ni(bpy)₃(BF₄)₂], [Co(bpy)₃(BF₄)₂], and Co(salen) (where bpy = 2,2′-bipyridine, and salen = N,N′-bis(salicylidene)ethylenediamine) is studied at a glassy carbon electrode modified with the poly(estersulfonate) ionomer Eastman AQ 55 in acetonitrile (MeCN). It is shown that the nickel complex is strongly incorporated into the polymer. The reduction of the divalent nickel compound features a two-electron process leading to a nickel(0) species which is released from the coating because of the lack of electrostatic attraction with the ionomer. Yet, the neutral zerovalent nickel-bipyridine complex is reactive towards ethyl 4-iodobenzoate and di-bromocyclohexane despite the presence of the polymer. The activation of the aryl halide occurs through an oxidative addition, whereas, an electron transfer is involved in the presence of the alkyl halide making the catalyst regeneration much faster in the latter case. The electrochemical study of [Co(bpy)₃(BF₄)₂] shows that incorporation of the cobalt complex into the polymer is efficient, provided excess bpy is used. This excess bpy does not interfere with the electrocatalytic activity of the cobalt complex incorporated in the AQ coating and efficient electrocatalysis is observed towards di-bromocyclohexane and benzyl-bromide as substrates. Finally, replacement of the bpy ligand with the macrocycle N,N′-bis(salicylidene)ethylenediamine, salen, leads to the incorporation of the non-charged Co^II(salen) complex into the AQ 55 polymer showing the relevancy of hydrophobic interactions. The reaction between the electrogenerated [Co^I(salen)]⁻ with 1,2-dibromocyclohexane exhibits a fast inner sphere electron transfer.     

Electrochemical synthesis and spectroelectrochemical behavior of poly(diphenylamine-co-4,4′-diaminodiphenyl sulfone)

The electroactive copolymer of diphenylamine (DPA) and 4,4′-diaminodiphenyl sulfone (DADPS) was synthesized electrochemically in 4 M H₂SO₄ and ethanol medium. Both electrochemical synthesis and characterization of the copolymer deposited on a glassy carbon electrode (GCE) were carried out using cyclic voltammetry. The voltammograms exhibited different patterns of behavior with different feed concentrations of DPA. Equimolar concentrations of DPA and DADPS demonstrated very efficient growth of the copolymer film on the surface of the GCE. The copolymer exhibited high solubility in dimethyl sulfoxide (DMSO). The scan rate exerted little-effect on this GCE copolymer film, revealing the film's excellent electroactive adherent properties. The effect of pH on the copolymer film showed that the polymer was electrochemically active up to pH 7.0. Spectroelectrochemical analysis of the copolymer film, carried out on an indium tin oxide (ITO) plate, showed multicolor electrochromic behavior when the applied potential was changed. The copolymer was characterized by FTIR and ¹H NMR spectral data. The surface morphology was studied using SEM analysis, the grain size of the copolymer was measured using XRD studies and was found to be 56 nm. The electrical conductivity of the copolymer was 2.65 × 10⁻² S cm⁻¹, as determined using a four-probe conductivity meter.     

Organosoluble and optically transparent fluorine-containing polyimides based on 4,4′-bis(4-amino-2-trifluoromethylphenoxy)-3,3′,5,5′-tetramethylbiphenyl

A novel fluorinated diamine monomer, 4,4′-bis(4-amino-2-trifluoromethylphenoxy)-3,3′,5,5′-tetramethylbiphenyl, was prepared by a nucleophilic chloro-displacement reaction of 3,3′,5,5′-tetramethyl-4,4′-biphenol with 2-chloro-5-nitrobenzotrifluoride and subsequent reduction of the intermediate dinitro compound. The diamine was reacted with aromatic dianhydrides to form polyimides via a two-step polycondensation method; formation of poly(amic acid)s, followed by thermal imidization. All the resulting polyimides were readily soluble in many organic solvents and exhibited excellent film forming ability. The polyimides exhibited high T_g (312-351 °C), good thermal stability, and good mechanical properties. Low moisture absorptions (0.2-1.1 wt%), low dielectric constants (2.54-3.64 at 10 kHz), and low color intensity were also observed.     

A theoretical investigation on the electronic and optical properties of π-conjugated copolymers with an efficient electron-accepting unit bithieno[3,2-b:2′3′-e]pyridine

One of the drawbacks for light-emitting diodes based on polyfluorene and derivatives (PFs) is the injection of electrons from the cathode due to the low electron affinity (EA) of most derivatives. Substitution by electron-accepting charge carriers on the conjugated polymer's backbone produces a remarkable influence on its electronic and optical properties. In this contribution, we apply quantum-chemical techniques to investigate a family of π-conjugated polymers poly(fluorene-alt-co-bithieno[3,2-b:2′3′-e]pyridine) (PFBTP) and poly(indenofluorene-alt-co-bithieno[3,2-b:2′3′-e]pyridine) (PIFBTP). The electronic properties of the neutral molecules, HOMO-LUMO gaps (Δ_H-L), in addition to the positive and negative ions, are studied using B3LYP functional. The lowest excitation energies (E_g) and the maximal absorption wavelength (λ_abs) of PFBTP and PIFBTP are studied employing the time dependent density functional theory (TD-DFT) and semiempirical method ZINDO. The IP, EA and λ_abs of the polymers were also obtained by extrapolating those of the oligomers to the inverse chain length equal to zero (1/n=0). Especially, the influence of the presence of bithieno[3,2-b:2′3′-e]pyridine (BTP) groups on to the fluorene or indenofluorene moieties on the electron-accepting and -transporting is emphasized. As shown the BTP is a good electron-accepting moiety for electronic materials due to the presence of the three electron negative heteroatoms. For both PFBTP and PIFBTP, the LUMOs are significantly lower about 0.6 eV than that of their corresponding polyfluorene (PF), which results in the increasing of EAs by about 0.6 eV than PF, indicating that the bithieonpyridine units have significantly improved the electron-accepting properties of the copolymers. These cause the band gap narrower and the maximal absorption red-shifted comparing with PF.     

Electrochemical and optical properties of new soluble dithienylpyrroles based on azo dyes

Two dithienylpyrroles based on azo dyes, namely 2,5′-dimethyl-[4-(2,5-di-thiophen-2-yl-pyrrol-1-yl)-phenyl]azobenzene (SNS-AB2) and 2,5′-dimethyloxy-[4-(2,5-di-thiophen-2-yl-pyrrol-1-yl)-phenyl]azobenzene (SNS-AB3), were synthesized and their corresponding polymers (PSNS-AB2 and PSNS-AB3) were successfully obtained via electropolymerization. The monomers have lower oxidation potentials (0.75 V and 0.80 V vs. Ag/AgCl for SNS-AB2 and SNS-AB3, respectively) when compared to their analogous. Both monomers exhibited photoisomerism properties under irradiation at 360 nm. During the irradiation process, for example, the color of SNS-AB3 changes from yellow to greenish yellow. The electroactive polymer films have well defined and reversible redox couples with a good cycle stability in both aqueous and organic solutions. The polymer films also exhibited electrochromic behaviors; color changes from yellowish green to dark green for the PSNS-AB2 (λ_max = 435 nm and E_g = 2.31 eV) and from mustard color to green for PSNS-AB3 (λ_max = 430 nm and E_g = 2.34 eV). Furthermore, the soluble polymers demonstrated different hues of yellow and green colors.     

Water resistant sulfonated polyimides based on 4,4′-binaphthyl-1,1′,8,8′-tetracarboxylic dianhydride (BNTDA) for proton exchange membranes

A series of sulfonated polyimides (SPIs) were synthesized in m-cresol from 4,4′-binaphthyl-1,1′,8,8′-tetracarboxylic dianhydride (BNTDA), 4,4′-diaminodiphenylether-2,2-disulfonicacid (ODADS), and 4,4′-diamino-diphenyl ether (ODA) in the presence of triethylamine and benzoic acid. The resulted polyimides showed much better water resistance than the corresponding sulfonated polyimides from 1,4,5,8-naphthalenetetracarboxylic dianhydride (NTDA) and ODADS, which is contributed to the higher electron density in the carbonyl carbon atoms of BNTDA. Copolyimides S-75 and S-50 maintained their mechanical properties and proton conductivities after aging in water at 100 °C for 800 h. The proton conductivity of these SPIs was 0.0250-0.3565 S/cm at 20 °C and 100% relative humidity (RH), and increased to 0.1149-0.9470 S/cm at 80 °C and 100% RH. The methanol permeability values of these SPIs were in the range of 0.99-2.36 × 10⁻⁷ cm²/s, which are much lower than that of Nafion 117 (2 × 10⁻⁶ cm²/s).     

Adsorption of camphor and 2,2′-bipyridine on Bi(1 1 1) electrode surface

Impedance spectroscopy and in situ STM methods have been used for investigation of the camphor and 2,2′-bipyridine (2,2′-BP) adsorption at the electrochemically polished Bi(1 1 1) electrode from weakly acidified Na₂SO₄ supporting electrolyte solution. The influence of electrode potential on the adsorption kinetics of camphor and 2,2′-BP on Bi(1 1 1) has been demonstrated. In the region of maximal adsorption, i.e. capacitance pit in the differential capacitance versus electrode potential curve, the heterogeneous adsorption and diffusion steps are the rate determining stages for camphor and 2,2′-BP adsorption at the Bi(1 1 1) electrode. It was found that for camphor | Bi(1 1 1) interface the stable adsorbate adlayer detectable by using the in situ STM method has been observed only at the positively charged electrode surface, where the weak co-adsorption of SO₄²⁻ anions and camphor molecules is possible. At the weakly negatively charged Bi(1 1 1) electrode surface there are only physically adsorbed camphor molecules forming the compact adsorption layer. The in situ STM data in a good agreement with impedance data indicate that a very well detectable 2,2′-BP adsorption layer is formed at Bi(1 1 1) electrode in the wide region of charge densities around the zero charge potential.     

Novel conjugated alternating copolymer based on 2,7-carbazole and 2,1,3-benzoselenadiazole

A novel conjugated alternating copolymer (PCzDBSe) based on N-9′-heptadecanyl-2,7-carbazole and 5,5-(4′,7′-di-2-thienyl-2′,1′,3′-benzoselenadiazole) was synthesized by Suzuki polycondensation. The polymer reveals excellent thermal stabilities with the decomposition temperature (5% weight loss) of 390 °C and the glass-transition temperature of 140 °C. The absorption peaks of the polymer are located at 412 and 626 nm, respectively, while the absorption onset is extended to 716 nm, which is 56 nm red-shifted as compared with its analogue, poly[N-9′-heptadecanyl-2,7-carbazole-alt-5,5-(4′,7′-di-2-thienyl-2′,1′,3′-benzothiadiazole)] (PCDTBT). The HOMO and LUMO levels of the polymer were estimated to be −5.28 and −3.55 eV, respectively, with an optical bandgap of 1.73 eV. The hole mobility of PCzDBSe as deduced from a solution-processed organic field effect transistor (OFET) was found to be 3.9 × 10⁻⁴ cm² V⁻¹ s⁻¹. Polymer solar cells (PSCs) based on the blends of PCzDBSe and [6,6]-phenyl-C₇₁-butyric acid methyl ester (PC₇₁BM) with a weight ratio of 1:4 were fabricated. Under AM 1.5 (AM, air mass), 100 mW cm⁻² illumination, the devices were found to have an open-circuit (V_oc) of 0.75 V, a short-circuit current density (J_sc) of 7.23 mA cm⁻², a fill factor (FF) of 45% and a power conversion efficiency (PCE) of 2.58%. The primary results indicate that 5,5-(4′,7′-di-2-thienyl-2′,1′,3′-benzoselenadiazole) is a promising unit for low bandgap polymer for polymer solar cells.     

Thermal desorption of deuterium from modified carbon nanotubes and its correlation to the microstructure

The process of deuterium desorption from single-wall carbon nanotubes (SWNTs) modified by atomic (D) and molecular (D₂) deuterium treatment was investigated in an ultrahigh vacuum environment using thermal desorption mass spectroscopy (TDMS). Microstructural and chemical analyses of SWNT material, modified by this deuterium interaction, were performed by means of a combination of scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS). The results disclose characteristic features in the TDMS spectra of deuterium evolved from the SWNT material, which can be correlated to the microstructure of nanocarbon material modified by D-treatment. The TDMS spectra of deuterium originating from the large diameter rope type nanotube structures, resulting from a prolonged low-pressure (D + D₂) gas mixture treatment, exhibit three overlapping desorption peaks: a dominant one with a desorption activation energy (E_des) of approx. 2.86 eV and lower intensity peaks at E_des of ∼1.50 and 2.46 eV. On the other hand, the TDMS spectra of deuterium taken from the “coral reef”-like carbon nanostructures, obtained after prolonged treatment of SWNTs to a high-pressure (D + D₂) gas mixture produced at high temperature, reveal the coexistence of four superimposed desorption peaks with E_des ranging from 1.23 to 4.4 eV. A dominant desorption peak with E_des ≈ 4.4 eV, can be attributed to bulk diffusion of D trapped within this nanocapsule bulk structure.     

An electrochemical DNA biosensor developed on novel multinuclear nickel(II) salicylaldimine metallodendrimer platform

An electrochemical DNA biosensor (EDB) was prepared using an oligonucleotide of 21 bases with sequence NH₂-5′-GAGGAGTTGGGGGAGCACATT-3′ (probe DNA) immobilized on a novel multinuclear nickel(II) salicylaldimine metallodendrimer on glassy carbon electrode (GCE). The metallodendrimer was synthesized from amino functionalized polypropylene imine dendrimer, DAB-(NH₂)₈. The EDB was prepared by depositing probe DNA on a dendrimer-modified GCE surface and left to immobilize for 1 h. Voltammetric and electrochemical impedance spectroscopic (EIS) studies were carried out to characterize the novel metallodendrimer, the EDB and its hybridization response in PBS using [Fe(CN)₆]^3−/4− as a redox probe at pH 7.2. The metallodendrimer was electroactive in PBS with two reversible redox couples at E°′ = +200 mV and E°′ = +434 mV; catalytic by reducing the E_pa of [Fe(CN)₆]^3−/4− by 22 mV; conducting and has diffusion coefficient of 8.597 × 10⁻⁸ cm² s⁻¹. From the EIS circuit fitting results, the EDB responded to 5 nM target DNA by exhibiting a decrease in charge transfer resistance (R_ct) in PBS and increase in R_ct in [Fe(CN)₆]^3−/4− redox probe; while in voltammetry, increase in peak anodic current was observed in PBS after hybridization, thus giving the EDB a dual probe advantage.     

Facile electrosynthesis of novel free-standing electroactive poly((S)-(−)-1,1′-bi-2-naphthol dimethyl ether) films with enhanced main chain axial chirality

Direct anodic oxidation of (S)-(−)-1,1′-bi-2-naphthol dimethyl ether (BNME) in CH₂Cl₂/CHCl₃ containing boron trifluoride diethyl etherate (BFEE) as the supporting electrolyte led to facile electrodeposition of high-quality free-standing poly((S)-(−)-1,1′-bi-2-naphthol dimethyl ether) (PBNME) film on stainless steel (SS)/indium tin oxide (ITO) electrodes. As-formed PBNME films showed good electroactivity and redox stability in CH₂Cl₂-BFEE, BFEE, and even in concentrated sulfuric acid. Both doped and dedoped PBNME films were partly soluble in strong polar solvents, such as dimethyl sulfoxide (DMSO). Quantum chemistry calculations of BNME and FT-IR spectrum of dedoped PBNME films demonstrated that the polymerization probably occurred at 4- and 4′-positions. Optical rotation determination showed that the conformation of the monomer was maintained during the electrochemical polymerization process and the polymer exhibited greatly enhanced optical rotation value with main chain axial chirality compared with that of the monomer. Fluorescent spectral studies indicated that soluble PBNME was a good blue-light emitter with maximum emission at 415 nm and fluorescence quantum yield of 0.15, while solid-state PBNME film showed its emission centered at 380 nm. Furthermore, as-formed PBNME manifested favorable thermal stability and relatively high electrical conductivity of about 10⁻¹ S cm⁻¹ at room temperature.     

Shear thickening behavior of dilute poly(diallyl dimethyl ammonium chloride) aqueous solutions

Using dynamic light scattering (DLS) and capillary dynamic viscoelasticity (DVE) analyzer, we investigated dilute (0.5 mg/ml) poly(diallyl dimethyl ammonium chloride) (PDADMAC) aqueous solution properties for three different molecular weights of PDADMACs mixed with various concentrations of NaCl. The dependence of PDADMAC molecular chain conformations in aqueous solutions on polymer molecular weight and NaCl concentration were studied. By analyzing dynamic shear viscosity η′(ω), viscoelastic relaxation times t_r, and shear rate at tube wall ?_a(ω) of PDADMAC aqueous solutions in oscillatory flows, we proposed that polymer chain conformations varied with increasing shear frequency ω via the following steps: intra-polymer associations, dissociation of intra-polymer associations, stretching of polymer chains, inter-polymer aggregations, and dissociations of inter-polymer aggregations. The intra-polymer associations lowered the n′ exponent of storage modulus G′(ω) (G′(ω) ∼ ω^n′) with n′ < 2, and the polymer chain stretching and inter-polymer aggregations caused shear thickening (i.e. upturn of η′(ω)) of PDADMAC aqueous solutions. The behaviors of the lowering of n′ exponent with n′ < 2 and the shear thickening were favored by increasing ionic strength of solutions. By comparing η′(ω) data with DLS hydrodynamic radii (R_h) data, we also confirmed the possibility of inter-polymer aggregations in dilute solutions when polymer chains were stretched in oscillatory flows.     

Synthesis, characterization and electrochemical properties of polybiselenophene

A novel electrically conducting polymer consisting of selenophene moiety, poly(biselenophene) (PBSE) was generated by chemical and electrochemical polymerization. This polymer gave lower bandgap energy (1.9 eV) than pristine polyselenophene (2.0 eV). The electrochemical and optical properties of PBSE was investigated by UV-Vis near infrared spectroscopy and electrochemistry. In situ electrochemical doping studies of PBSE showed the formation of polaron states at 1.4 and 0.8 eV. Through cyclic voltammetry, the polymer oxidation potential (E_pa) and reduction potential (E_pc) for p-doping process for PBSE were observed at 0.93 and 0.86 V, respectively, at a scan rate of 20 mV s⁻¹. Upon chemical doping using chemical reagents such as iodine and ferric chloride, a maximum conductivity of 0.1 S cm⁻¹ was achieved.     

Synthesis and characterization of highly refractive polyimides derived from 2,7-bis(4′-aminophenylenesulfanyl)thianthrene-5,5,10,10-tetraoxide and aromatic dianhydrides

New polyimides (PIs) containing thioether and sulfonyl groups in their main chains have been developed. These PIs were synthesized by a two-step polycondensation procedure from several dianhydrides such as 4,4′-[p-thiobis(phenylenesulfanyl)] diphthalic anhydride (3SDEA), 4,4′-oxydiphthalic anhydride (ODPA), 4,4′-[sulfonylbis(phenylenesulfanyl)] diphthalic anhydride (pDPSDA) and a new sulfonyl and sulfur-containing aromatic diamine, 2,7-bis(4′-aminophenylenesulfanyl)thianthrene-5,5,10,10-tetraoxide (APTTT). All of the PIs show good thermal and optical properties such as optical transparency higher than 80% at 450 nm for a thickness of ca. 10 μm, glass transition temperatures higher than 250 °C, thermal decomposition temperatures (T_10%) in the range of 504-514 °C. Because of the two sulfonyl groups at each monomer unit in the polymer main chain, all of the PIs show good transparency maintaining relatively high refractive index.     

A laccase-glucose oxidase biofuel cell prototype operating in a physiological buffer

Here we report on the design and study of a biofuel cell consisting of a glucose oxidase-based anode (Aspergillus niger) and a laccase-based cathode (Trametes versicolor) using osmium-based redox polymers as mediators of the biocatalysts’ electron transfer at graphite electrode surfaces. The graphite electrodes of the device are modified with the deposition and immobilization of the appropriate enzyme and the osmium redox polymer mediator. A redox polymer [Os(4,4′-diamino-2,2′bipyridine)₂(poly{N-vinylimidazole})-(poly{N-vinylimidazole})₉Cl]Cl (E⁰′ = −0.110 V versus Ag/AgCl) of moderately low redox potential is used for the glucose oxidizing anode and a redox polymer [Os(phenanthroline)₂(poly{N-vinylimidazole})₂-(poly{N-vinylimidazole})₈]Cl₂ (E⁰′ = 0.49 V versus Ag/AgCl) of moderately high redox potential is used at the dioxygen reducing cathode. The enzyme and redox polymer are cross-linked with polyoxyethylene bis(glycidyl ether). The working biofuel cell was studied under air at 37 °C in a 0.1 M phosphate buffer solution of pH range 4.4-7.4, containing 0.1 M sodium chloride and 10 mM glucose. Under physiological conditions (pH 7.4) maximum power density, evaluated from the geometric area of the electrode, reached 16 μW/cm² at a cell voltage of 0.25 V. At lower pH values maximum power density was 40 μW/cm² at 0.4 V (pH 5.5) and 10 μW/cm² at 0.3 V (pH 4.4).     

Enhanced thermal stability of poly(lactide)s in the melt by enantiomeric polymer blending

Poly(l-lactide) (i.e. poly(l-lactic acid) (PLLA)) and poly(d-lactide) (i.e. poly(d-lactic acid) (PDLA)) and their equimolar enantiomeric blend (PLLA/PDLA) films were prepared and the effects of enantiomeric polymer blending on the thermal stability and degradation of the films were investigated isothermally and non-isothermally under nitrogen gas using thermogravimetry (TG). The enantiomeric polymer blending was found to successfully enhance the thermal stability of the PLLA/PDLA film compared with those of the pure PLLA and PDLA films. The activation energies for thermal degradation (ΔE_td) were evaluated at different weight loss values from TG data using the procedure recommended by MacCallum et al. The ΔE_td values of the PLLA/PDLA, PLLA, and PDLA films were in the range of 205-297, 77-132, and 155-242 kJ mol⁻¹ when they were evaluated at weight loss values of 25-90% and the ΔE_td value of the PLLA/PDLA film was higher by 82-110 kJ mol⁻¹ than the averaged ΔE_td value of the PLLA and PDLA films. The mechanism for the enhanced thermal stability of the PLLA/PDLA film is discussed.     

High thermal stable thermoplastic-thermosetting polyimide film by use of asymmetric dianhydride (a-BPDA)

In order to obtain thermoplastic (before curing) and thermosetting (after curing) polyimides with high T_g for adhesive film, we prepared novel polyimides having phenylethynyl group in the side chain (44% of concentration of curing group) from asymmetric 2,3,3′,4′-biphenyltetracarboxylic dianhydride (a-BPDA), 3,4′-oxydianiline (3,4′-ODA) or 1,3-bis(4-aminophenoxy)benzene (1,3,4-APB) or 1,3-bis(3-aminophenoxy)benzene (1,3,3-APB), and 2,4-diamino-1-(4-phenylethynylphenoxy)benzene (mPDAp). Among three kinds of polymer, uncured polyimide of a-BPDA/1,3,4-APB; mPDAp had rather high T_g (265 °C, DMA) and thermoplasticity (E′ drop>10³ at T_g). After curing reaction of phenylethynyl group, the T_g of the polyimide was increased dramatically (364 °C, DMA). The polyimide derived from 1,3,4-APB having less concentration of curing group (20%) was also prepared to improve further film flexibility and toughness.     

Non-isothermal elimination process in the solid state of n-alkyl-sulphinyl precursor polymers towards conjugated poly[2-(3′,7′-dimethyloctyloxy)-5-methoxy-1,4-phenylene vinylene] studied with MTDSC and TGA

The elimination process of n-alkyl-sulphinyl precursor polymers towards conjugated poly[2-(3′,7′-dimethyloctyloxy)-5-methoxy-1,4-phenylene vinylene], or OC₁C₁₀-PPV, was studied with modulated temperature differential scanning calorimetry (MTDSC) and thermogravimetric analysis (TGA), with a focus on the subsequent reactions of the elimination products. The latter reactions were monitored using the non-reversing heat flow and the heat capacity (C_p) measured in non-isothermal MTDSC experiments. The disproportionation reaction occurs in a temperature range between 85 and 135 °C and is seen as an increase in C_p. Water and elimination products released during the elimination reaction act as plasticizers and lower the T_g. TGA experiments show that the temperature, film thickness, and the eliminated group play an important role on the diffusion and evaporation of the elimination products. The elimination products can further decompose and interact with the conjugated system to form undesirable crosslinks (network formation) in a temperature range of 140-160 °C.