Nanocasting Synthesis of Mesostructured Co<Subscript>3</Subscript>O<Subscript>4</Subscript> via a Supercritical CO<Subscript>2</Subscript> Deposition Method and the Catalytic Performance for CO Oxidation

Abstract  

We demonstrate a supercritical CO₂ (scCO₂) deposition method to synthesize mesostructured Co₃O₄ with crystalline walls using SBA-15 as the hard template. By variation of the scCO₂ pressure, randomly organized nanorods or a highly ordered mesoporous structure of Co₃O₄ is obtained after only one filling operation. The catalytic tests show that the randomly organized Co₃O₄ nanorods display excellent activity for CO oxidation with the complete conversion of CO even at room temperature, while neither the ordered mesoporous nor bulk Co₃O₄ is active at this low-temperature, demonstrating the important role of Co₃O₄ morphology in catalysis.     

Synthesis of nickel catalysts supported on Zr-doped ordered mesoporous Al<Subscript>2</Subscript>O<Subscript>3</Subscript> and their catalytic performance for low-temperature CO<Subscript>2</Subscript> reforming of CH<Subscript>4</Subscript>

A series of Zr-doped ordered mesoporous Al₂O₃ with various Zr contents were synthesized by evaporation-induced self-assembly strategy and the Ni-based catalysts supported on these Al₂O₃ materials were prepared by impregnation method. These catalysts with large specific surface area, big pore volume, uniform pore size possess excellent catalytic performance for the low-temperature carbon dioxide reforming of methane. The activities of these catalysts were tested in carbon dioxide reforming of methane reaction with temperature increasing from 500 to 650?°C and the stabilities of these catalysts were evaluated for long time reaction at 650?°C. It was found that when Zr/(Zr?+?Al) molar ratio?=?0.5%, the Ni/0.5ZrO₂–Al₂O₃ catalyst showed the highest activity, and exhibited superior stabilization compared to the Ni-based catalyst supported on traditional ordered mesoporous Al₂O₃. The “confinement effect” from mesoporous channels of alumina matrix is helpful to stabilize the Ni nanoparticles. As a promoter, Zr could stabilize the ordered mesoporous framework by reacting with Al₂O₃ to form ZrO₂–Al₂O₃ solid solution. Since ZrO₂ enhances the dissociation of carbon dioxide, more oxygen intermediates are given to remove the carbon formed during the reaction.     

Soft Template Synthesis of Super Paramagnetic Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> Nanoparticles a Novel Technique

The present study reports a facile technique for the synthesis of crystalline super paramagnetic nano ferrite (Fe₃O₄) particles using diethyl amine as a soft template. The spectral properties of Fe₃O₄ nanoparticles were characterized by UV–visible and Fourier Transform Infrared (FTIR) spectroscopies while the crystalline structure and particle size was estimated using X-Ray diffraction (XRD) as well as transmission electron microscopy (TEM) techniques. The super paramagnetic behavior of Fe₃O₄ nanoparticles was determined using vibrating sample magnetometer (VSM) at 300 K. The results of the studies revealed that this technique could be adopted to synthesize agglomerate free super paramagnetic Fe₃O₄ nanoparticles which may find potential application in the filed of biosensor and corrosion protective coatings.     

Preparation and properties of Co<Subscript>3</Subscript>O<Subscript>4</Subscript> nanorods as supercapacitor material

Co₃O₄ nanorods have been successfully synthesized by thermal decomposition of the precursor prepared via a facile and efficient microwave-assisted hydrothermal method, using cetyltrimethylammonium bromide (CTAB) with ordered chain structures as soft template for the first time. The obtained Co₃O₄ was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and electrochemical measurements. The results demonstrate that the as-synthesized nanorods are single crystalline with an average diameter of about 20 to 50 nm and length up to several micrometers. Preliminary electrochemical studies, including cyclic voltammetry (CV), galvanostatic charge–discharge, and electrochemical impedance spectroscopy (EIS) measurements, are carried out in 6 M KOH electrolyte. Specific capacitance of 456 F g⁻¹ for a single electrode could be achieved even after 500 cycles, suggesting its potential application in electrochemical capacitors. This promising method could provide a universal green chemistry approach to synthesize other low-cost and environmentally friendly transition metal hydroxide or oxide.     

Nonionic polymeric surfactant template for mesoporous NiCo<Subscript>2</Subscript>O<Subscript>4</Subscript> formation

Mesostructured NiCo₂O₄ is synthesized in presence of nonionic glucose based polymeric surfactant, β-C₁₀Alkyl Poly Glucoside (β-C₁₀APG). Formed NiCo₂O₄ mesostructures have pore size in the range of 25–65 Å and surface area of 202.9 m²/g. Formed particles are rod shape with 2d hexagonal pattern and Fd3m space group point symmetry. The formation of mesostructure phase is explained by coordination bond formation between metal ions with surfactant head. β-C₁₀APG has the potential to be explored as green template for mesopore formation.     

Changes in Surface Property and Catalysis of Mesoporous Nb<Subscript>2</Subscript>O<Subscript>5</Subscript> from Amorphous to Crystalline Pore Walls

Abstract  

The amorphous inorganic phase of an ordered amorphous mesoporous Nb₂O₅ with two dimensional hexagonal (2D-hex) structure was crystallized with maintaining the original well arranged porous structure. The difference in surface property between amorphous and crystalline Nb₂O₅ with similar ordered mesoporous structure was compared. It was found from water adsorption–desorption isotherms and observation by infrared (IR) spectroscopy that the amorphous sample was hydrophilic and that the surface OH groups were acidic. On the other hand, the OH groups on crystalline mesoporous Nb₂O₅ were non-acidic and inside the pores was less hydrophilic. The surface property was also compared by a catalytic reaction, oxidation of cyclohexe by an aqueous solution of H₂O₂. The high (95%) selectivity for 1,2-epoxycyclohexane was obtained at 40 °C for 2 h in methanol solvent over crystalline mesoporous Nb₂O₅ at 12% conversion, while amorphous mesoporous Nb₂O₅ showed high (68%) selectivity for 1,2-cyclohexanediol in acetonitrile solvent at 60 °C for 2 h at 22% conversion. The differences in selectivity and the optimal solvent between amorphous and crystalline samples were interpreted in terms of the acidic feature of surface OH groups and hydrophilicity. While similar selectivity was observed over non-porous crystalline Nb₂O₅, much higher conversion over crystalline mesoporous Nb₂O₅ was attained at the same surface area. Thus, an advantage of mesoporous structure is attributed to the higher contact time of molecules inside the pores to the catalyst surface than those outside the particles.     

Phase transition of mesoporous SiO<Subscript>2</Subscript> impregnated with an organic templating agent by post-synthetic microwave heating

Mesoporous silica SBA-15 samples were subjected to microwave heating for 10–40 min at 393 and 443 K after dry-impregnation with TPAOH (tetrapropylammonium hydroxide) to prepare a mesoporous material with zeolytically ordered pore walls. Physicochemical properties of the materials prepared were characterized by XRD, N₂ adsorption at 77 K, SEM, TEM, UV–vis and FT-IR spectroscopies. These investigations revealed that selective transformation of amorphous pore walls of SBA-15 to crystalline zeolytic phase is difficult to be achieved and a mixed phase of mesoporous silica/zeolite composite material was obtained, instead. Microwave heating time, temperature, TPAOH concentration, and hydrothermal stability of the mesoporous host materials tested (MCM-41, HMS, and SBA-15) were important factors to maintain the mesopore structure of the host materials during the post-synthetic microwave heating treatment.     

Effect of HCl Concentration on the Dispersity of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> Nanoparticles

In this paper, monodisperse 6 nm-sized Fe₃O₄ nanoparticles with spinel crystalline structure were synthesized via a co-precipitation method. The effect of HCl concentrations on Fe₃O₄ samples was investigated by TEM, VSM and UV–vis. HCl-modified Fe₃O₄ nanoparticles solution was a stable, clear, transparent cationic colloid. The results showed that HCl had a great influence on the dispersity of Fe₃O₄ nanoparticles and almost no influence on the materials magnetism.     

Local crystallization of glasses in the La<Subscript>2</Subscript>O<Subscript>3</Subscript>-B<Subscript>2</Subscript>O<Subscript>3</Subscript>-GeO<Subscript>2</Subscript> system under laser irradiation

A method is proposed for local crystallization of glasses under laser irradiation. This method makes it possible to nucleate and grow microcrystals with a size distribution similar to a monodisperse distribution for several fractions of a second in any glass region chosen in advance. It is demonstrated using glasses in the La₂O₃-B₂O₃-GeO₂ system as an example that the crystallization of the stillwellite-like phase LaBGeO₅ with the composition close to the composition of the initial glass is observed in the glass under irradiation with the copper vapor laser operating in the high-speed pulse modulation mode. Strips (up to ～300 μm) produced at a specified depth from the glass surface contain extended regions consisting of uniformly distributed crystals, which have almost identical sizes, exhibit a pronounced faceting, and are identified using X-ray diffraction. The size and the number of crystals can be changed over a wide range by varying laser treatment conditions. This opens up the way to the design of new glass-ceramic materials in which the location of the crystalline phase in the glass bulk is controlled by a developer.     

Synthesis and optical property of one-dimensional spinel ZnMn<Subscript>2</Subscript>O<Subscript>4</Subscript> nanorods

Spinel zinc manganese oxide (ZnMn₂O₄) nanorods were successfully prepared using the previously synthesized α-MnO₂ nanorods by a hydrothermal method as template. The nanorods were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, UV-Vis absorption, X-ray photoelectron spectroscopy, surface photovoltage spectroscopy, and Fourier transform infrared spectroscopy. The ZnMn₂O₄ nanorods in well-formed crystallinity and phase purity appeared with the width in 50-100 nm and the length in 1.5-2 μm. They exhibited strong absorption below 500 nm with the threshold edges around 700 nm. A significant photovoltage response in the region below 400 nm could be observed for the nanorods calcined at 650 and 800°C.     

Preparation and characterization of spindle-like Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> mesoporous nanoparticles

Magnetic spindle-like Fe₃O₄ mesoporous nanoparticles with a length of 200 nm and diameter of 60 nm were successfully synthesized by reducing the spindle-like α-Fe₂O₃ NPs which were prepared by forced hydrolysis method. The obtained samples were characterized by transmission electron microscopy, powder X-ray diffraction, attenuated total reflection fourier transform infrared spectroscopy, field emission scanning electron microscopy, vibrating sample magnetometer, and nitrogen adsorption-desorption analysis techniques. The results show that α-Fe₂O₃ phase transformed into Fe₃O₄ phase after annealing in hydrogen atmosphere at 350°C. The as-prepared spindle-like Fe₃O₄ mesoporous NPs possess high Brunauer-Emmett-Teller (BET) surface area up to ca. 7.9 m² g^-1. In addition, the Fe₃O₄ NPs present higher saturation magnetization (85.2 emu g^-1) and excellent magnetic response behaviors, which have great potential applications in magnetic separation technology.     

Synthesis of ZnGa<Subscript>2</Subscript>O<Subscript>4</Subscript> Hierarchical Nanostructure by Au Catalysts Induced Thermal Evaporation

In this paper, ZnGa₂O₄ hierarchical nanostructures with comb-like morphology are fabricated by a simple two-step chemical vapor deposition (CVD) method: first, the Ga₂O₃ nanowires were synthesized and employed as templates for the growth of ZnGa₂O₄ nanocombs; then, the as-prepared Ga₂O₃ nanowires were reacted with ZnO vapor to form ZnGa₂O₄ nanocombs. Before the reaction, the Au nanoparticles were deposited on the surfaces of Ga₂O₃ nanowires and used as catalysts to control the teeth growth of ZnGa₂O₄ nanocombs. The as-prepared ZnGa₂O₄ nanocombs were highly crystallized with cubic spinel structure. From the photoluminescence (PL) spectrum, a broad band emission in the visible light region was observed of as-prepared ZnGa₂O₄ nanocombs, which make it promising application as an optical material.     

Effects of La<Subscript>2</Subscript>O<Subscript>3</Subscript> on ZrO<Subscript>2</Subscript> supported Ni catalysts for autothermal reforming of CH<Subscript>4</Subscript>

The effect of La₂O₃ content in Ni-La-Zr catalyst was investigated for the autothermal reforming (ATR) of CH₄. The catalysts were prepared by the coprecipitation method and had a mesoporous structure. Temperature programmed reduction (TPR) and X-ray photoelectron spectroscopy (XPS) indicated that a strong interaction developed between Ni species and the support with the addition of La₂O₃. Thermogravimetric analysis (TGA) and H₂-pulse chemisorption showed that the addition of La₂O₃ led to well dispersed NiO molecules on the support. Ni-La-Zr catalysts gave much higher CH₄ conversion than Ni-Zr catalyst. The Ni-La-Zr containing 3.2 wt% La₂O₃ showed the highest activity. The optimum conditions for maximal CH₄ conversion and H₂ yield were H₂O/CH₄=1.00, O₂/CH₄=0.75. Under these conditions, CH₄ conversion of 83% was achieved at 700 °C. In excess O₂ (O₂/CH₄>0.88), the catalytic activity was decreased due to sintering of the catalyst.     

Preparation of CuO-CeO<Subscript>2</Subscript>-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalyst with mesopore structure for water gas shift reaction

The water gas shift (WGS) reaction has been investigated widely in fuel cell technologies due to the potential for high fuel efficiency and lower emissions during the production of pure hydrogen. Industrially, the WGS reaction occurs in one of the following two ways: (a) high-temperature in the range of 310–450°C with Fe-Cr catalyst, (b) low-temperature in the range of 210–250°C with Cu-ZnO-Al₂O₃. In this study, a mesoporous catalyst was prepared, with a large surface area and uniformity in both pore size and distribution, by using a one-pot synthesis method. The prepared CuO-CeO₂-Al₂O₃ brought high CO conversion (82%), and was suitable for WGS reaction at low temperature (250 °C). This article is dedicated to Professor Chang Kyun Choi for celebrating his retirement from the School of Chemical and Biological Engineering, Seoul National University.     

Influence of Calcination Temperature on Activity and Selectivity of Ni–CeO<Subscript>2</Subscript> and Ni–Ce<Subscript>0.8</Subscript>Zr<Subscript>0.2</Subscript>O<Subscript>2</Subscript> Catalysts for CO<Subscript>2</Subscript> Methanation

Herein, we studied the influence of calcination temperature (500–800 °C) of Ni/CeO₂ and Ni/Ce_0.8Zr_0.2O₂ catalysts on the specific surface area, pore volume, crystalline size, lattice parameter, chemical bonding and oxidation states, nickel dispersion and CH₄/CO production rate in CO₂ methanation. In general, the catalytic performance revealed that Zr doping catalysts could increase the CH₄ production rate. Combined with the production rate and the characterizations results, we found that the combination of nickel dispersion, peak area of CO₂–TPD and O_II/(O_II + O_I)) play the critical role in increasing the CH₄ production rate. It is well to be mentioned that the CO production rate is strongly influenced by the nickel dispersion. Furthermore, the in-situ DRIFTS confirmed that the CO originates from the decomposition of H-assisted formate species.     

Structure and crystallization of ZnO-B<Subscript>2</Subscript>O<Subscript>3</Subscript>-P<Subscript>2</Subscript>O<Subscript>5</Subscript> glasses

Structure and crystalline behavior of the ternary system ZnO-B₂O₃-P₂O₅ glasses were investigated by means of X-ray diffraction (XRD) and infrared Raman spectra. The research showed that number of the planar [BO₃] units increases with the increase of B₂O₃ content. When the B₂O₃ content is above ≥10 mol %, the relative content of planar [BO₃] units increases rapidly and causes weakening of the glass structure and decrease in the chemical stability. In the crystallized glasses the predominant crystal phase Zn₂P₂O₇ decreases with the increase of B₂O₃ content, while the crystal phase BPO₄ increases with it, which cause the declining of chemical stability and the decrease of thermal coefficients of expansion.     

Crystallization of glasses in the SrO-B<Subscript>2</Subscript>O<Subscript>3</Subscript> system

The crystallization of strontium borate glasses containing 16.7–43.0 mol % SrO is investigated. New crystalline compounds of the hypothetical compositions 2SrO · 3B₂O₃ (metastable) and SrO · 5B₂O₃ (stable below 750°C), as well as the metastable diborate modification β-SrO · 2B₂O₃, are revealed, and their X-ray powder diffraction data are obtained. It is demonstrated that, with a deficit of strontium oxide, the 4SrO · 7B₂O₃ compound forms solid solutions. Strontium triborate SrO · 3B₂O₃, which was previously prepared only through the dehydration of crystal hydrates, is produced using crystallization of glasses. The thermal stability of this compound is studied. The influence of the dispersity on the stability of different crystalline phases is discussed. Variants of the phase diagram for the SrO · B₂O₃-B₂O₃ system in the case of monolithic and dispersed samples are proposed from analyzing the experimental results and the data available in the literature.     

Sulfidation/regeneration multicycle testing of nickel-modified ZnFe<Subscript>2</Subscript>O<Subscript>4</Subscript> desulphurization sorbent

A commercial metal oxide sorbent for the desulphurization of coal-derived gas requires high desulphurization reactivity, mechanical strength, ability to regenerate, and stability to endure many sulfidation-regeneration cycles. In this paper, the sulfur capacity and multiple cycles of a nickel-modified ZnFe₂O₄ sorbent prepared by the sol-gel auto-combustion method were measured in a fixed-bed reactor at middle temperature of 300°C (sulfidation temperature) and 500°C (regeneration temperature). Also, the BET surface area, pore volume, average pore diameter and X-ray diffraction (XRD) patterns of the sorbent through multicycles were studied. Multicycle runs indicate that the sulfidation reactivity decreases slightly during the second cycle and keeps steady in the following cycles. The results indicate that the nickel-modified ZnFe₂O₄ keeps high reactivity and structural stability in the multicycle testing of sulfidation/regeneration.     

Phase Equilibria in the Gd<Subscript>2</Subscript>O<Subscript>3</Subscript>-SrAl<Subscript>2</Subscript>O<Subscript>4</Subscript> System

The phase equilibria are investigated and the phase diagram is constructed for the Gd₂O₃-SrAl₂O₄ pseudobinary join of the Gd₂O₃-SrO-Al₂O₃ ternary oxide system. One ternary compound, namely, Gd₂SrAl₂O₇, is revealed in the Gd₂O₃-SrAl₂O₄ join. It is found that this compound undergoes congruent melting.     

Synthesis of polyaniline/mesoporous carbon nanocomposites and their application for CO<Subscript>2</Subscript> sorption

Ordered mesoporous carbons (OMC), were synthesized by nanocasting using ordered mesoporous silica as hard templates. Ordered mesoporous carbons CMK-1 and CMK-3 were prepared from MCM-48 and SBA-15 materials with pore diameters of 3.4 nm and 4.2 nm, respectively. Mesoporous carbons can be effectively modified for CO₂ adsorption with amine functional groups due to their high affinity for CO₂. Polyaniline (PANI)/mesoporous carbon nanocomposites were synthesized from in-situ polymerization by dissolving OMC in aniline monomer. The polymerization of aniline molecules inside the mesochannels of mesoporous carbons has been performed by ammonium persulfate. The nanocomposition, morphology, and structure of the nanocomposite were investigated by nitrogen adsorption-desorption isotherms, Fourier Transform Infrared (FT–IR), X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM) and thermo gravimetric analysis (TGA). CO₂ uptake capacity of the mesoporous carbon materials was obtained by a gravimetric adsorption apparatus for the pressure range from 1 to 5 bar and in the temperature range of 298 to 348 K. CMK-3/PANI exhibited higher CO₂ capture capacity than CMK-1/PANI owing to its larger pore size that accommodates more amine groups inside the pore structure, and the mesoporosity also can facilitate dispersion of PANI molecules inside the pore channels. Moreover, the mechanism of CO₂ adsorption involving amine groups is investigated. The results show that at elevated temperature, PANI/mesoporous carbon nanocomposites have a negligible CO₂ adsorption capacity due to weak chemical interactions with the carbon nanocomposite surface.