Microstructures and Microwave Dielectric Characteristics of Ca(Zn1/3Nb2/3)O3 Complex Perovskite Ceramics

Ca(Zn_1/3Nb_2/3)O₃ microwave dielectric ceramics were prepared using a solid-state reaction process, and their microwave dielectric properties were evaluated as functions of sintering and postdensification annealing conditions. The relationship between microwave dielectric properties and processing was interpreted through the variation of microstructures. The dielectric constant showed slight variation with sintering and annealing conditions, but the Q × f value increased at first and then decreased with increased sintering temperature, and annealing in oxygen indicated significant improvement in Q × f , especially for the specimens sintered at higher temperatures. The good microwave dielectric properties were obtained in the ceramics sintered at 1225°C in air for 3 h and annealed at 1100°C in oxygen for 8 h: ɛ= 34.1, Q × f = 15 890 GHz, τ_f=−48 ppm/°C.     

Microwave Dielectric Properties of Low-Fired ZnNb2O6 Ceramics with BiVO4 Addition

The BiVO₄ additive was found effective for low-temperature firing of ZnNb₂O₆ polycrystalline ceramics below 950°C in air without a serious degradation in their microwave dielectric properties. Dense BiVO₄-doped ZnNb₂O₆ samples of a relative sintered density over 95% could be prepared even at 925°C. An optimally processed specimen exhibited excellent microwave dielectric properties of Q · f = 55000 GHz, ɛ_r= 26, and τ_f=−57 ppm/°C. With increasing BiVO₄ addition up to 20 mol% relative to ZnNb₂O₆, while the quality factor Q · f was gradually decreased, the relative dielectric constant, ɛ_r, was linearly increased and the temperature coefficient of resonant frequency, τ_f, was slightly increased. The variations in Q · f and ɛ_r are surely attributable to the residual BiVO₄ in the ZnNb₂O₆ matrix. An unexpected slight increase in τ_f is probably due to the formation of the Bi(V,Nb)O₄-type solid solution.     

Preparation, Characterization, and Microwave Properties of RETiNbO6 (RE = Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Y, and Yb) Dielectric Ceramics

Microwave ceramic dielectric resonators (DRs) based on RETiNbO₆ (RE = Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Y, and Yb) have been prepared using the conventional solid-state ceramic route. The DR samples are characterized using XRD and SEM methods. The microwave dielectric properties are measured using resonant methods and a net work analyzer. The ceramics based on Ce, Pr, Nd, and Sm have dielectric constants in the range 32–54 and positive coefficient of thermal variation of resonant frequency (τ_f). The ceramics based on Gd, Tb, Dy, Y, and Yb have dielectric constants in the range 19–22 and negative τ_f.     

Structure and Microwave Dielectric Properties of (Zn1−xCox)TiO3 Ceramics

Dielectric ceramics in the system (Zn_{1− x} Co _x )TiO₃ ( x = 0–1) were synthesized by the solid-state reaction route. The phase distribution, microstructure, and dielectric properties were characterized by using powder X-ray diffraction analysis, electron microscopy, and microwave measurement techniques. Three phase composition regions were identified in the specimens sintered at 1150°C; [spinel + rutile] at 0 ≤ x ≤ 0.5, [spinel + ilmenite + rutile] at 0.5 < x ≤ 0.7, and [ilmenite] phase at 0.7 < x ≤ 1. For the 0 ≤ x ≤ 0.5 region, the amount of Ti-rich precipitates incorporated into the spinel phase decreased with the Co content at 0 ≤ x ≤ 0.5, with a concomitant increase of the rutile phase. The ilmenite phase appeared for high Co content. The microwave dielectric properties depended on the phase composition and volume according to the three phase regions, where the relative amount of rutile to the spinel or ilmenite determined the dielectric properties. The dielectric constant as a function of Co addition was modeled with a Maxwell mixing rule. An optimum phase distribution was determined in this system with dielectric constant of 25, a Q * f 70 000 GHz, and a low temperature coefficient of the resonant frequency.     

Microstructures and Dielectric Properties of Pure and Doped KNbO3 Ceramics

Regions consisting of grains of pronounced cubic develpment exist in pure KNbO₃ ceramics which exhibit a temperature dependence of dielectric constant very similar to that of KNbO₃ crystals. KNbO₃ ceramics doped with GeO₂-K₂O additives have small grains, semiconducting resistance, and a different curve of dielectric constant versus temperature. As the average grain size decreases, the shape of the curve differs increasingly from that of KNbO₃ crystals.     

Microstructure and Microwave Dielectric Properties of Ba(Zn1/3Ta2/3)O3 Ceramics with ZrO2 Addition

The effect of ZrO₂ on crystallographic order, microstructure, and microwave dielectric properties of Ba(Zn_1/3Ta_2/3)O₃ (BZT) ceramics was investigated. A small amount of ZrO₂ disturbed the 1:2 cation ordering. The average grain size of the BZT significantly increased with the addition of ZrO₂, which was attributed to liquid-phase formation. The relative density increased with the addition of a small amount of ZrO₂, but it decreased when the ZrO₂ content was increased. Variation of the dielectric constant with ZrO₂ addition ranged between 27 and 30, and the temperature coefficient of resonant frequency increased abruptly as the ZrO₂ amount exceeded 2.0 mol%. The Q value of the BZT significantly improved with the addition of ZrO₂, which could be explained by the increased relative density and grain size. The maximum Q × f value achieved in this investigation was ∼164 000 GHz for the BZT with 2.0 mol% ZrO₂ sintered at 1550°C for 10 h.     

Microwave Dielectric Properties of CaTiO3-CaAl1/2Nb1/2O3 Ceramics Doped with Li3NbO4

The microwave dielectric properties of CaTi_{1− x} (Al_1/2Nb_1/2) _x O₃ solid solutions (0.3 ≤ x ≤ 0.7) have been investigated. The sintered samples had perovskite structures similar to CaTiO₃. The substitution of Ti⁴⁺ by Al³⁺/Nb⁵⁺ improved the quality factor Q of the sintered specimens. A small addition of Li₃NbO₄ (about 1 wt%) was found to be very effective for lowering sintering temperature of ceramics from 1450–1500° to 1300°C. The composition with x = 0.5 sintered at 1300°C for 5 h revealed excellent dielectric properties, namely, a dielectric constant (ɛ_r) of 48, a Q × f value of 32 100 GHz, and a temperature coefficient of the resonant frequency (τ_f) of −2 ppm/K. Li₃NbO₄ as a sintering additive had no harmful influence on τ_f of ceramics.     

Microwave Dielectric Properties of Low-Fired Ba5Nb4O15

The effect of B₂O₃ on the sintering temperature and microwave dielectric properties of Ba₅Nb₄O₁₅ has been investigated using X-ray powder diffraction, scanning electron microscopy, and a network analyzer. Interactions between Ba₅Nb₄O₁₅ and B₂O₃ led to formation of second phases, BaNb₂O₆ and BaB₂O₄. The addition of B₂O₃ to Ba₅Nb₄O₁₅ resulted in lowering the sintering temperature from 1400° to 925°C. Low-fired Ba₅Nb₄O₁₅ could be interpreted by measuring changes in the quality factor ( Q × f ), the relative dielectric constant (ɛ_r), and the temperature coefficient of resonant frequency (τ_f) as a function of B₂O₃ additions. More importantly, the formation of BaNb₂O₆ provided temperature compensation. The microwave dielectric properties of low-fired Ba₅Nb₄O₁₅ had good dielectric properties: Q × f = 18700 GHz, ɛ_r= 39, and τ_f= 0 ppm/°C.     

Correlation between Arrangement of Dielectric Layers and Microwave Dielectric Properties of Mg0.93Ca0.07TiO3−(Ca0.3Li0.14Sm0.42)TiO3 Ceramics

Effect of geometrical shape and induced thermal strain on the microwave dielectric properties of the layered structure ceramics of Mg_0.93Ca_0.07TiO₃ with (Ca_0.3Li_0.14Sm_0.42)TiO₃ was investigated as a function of the number of dielectric layers. The dielectric constant and the temperature coefficient of resonant frequency (TCF) were not changed significantly with the number of dielectric layers but only depended on the net compositional ratio. However, the dielectric loss quality was affected by the number of interfaces between dielectric layers, which had a partial composition inhomogeneity due to the diffusion of Mg²⁺ and Ti⁴⁺ ions. The dielectric loss quality also decreased with an increase of thermal strain induced to each dielectric layer.     

Effects of Calcium Substitution on the Structural and Microwave Dielectric Characteristics of [(Pb1−xCax)1/2La1/2](Mg1/2Nb1/2)O3 Ceramics

The effects of calcium substitution on the structural and microwave dielectric characteristics of [(Pb_{1− x} Ca _x )_1/2La_1/2](Mg_1/2Nb_1/2)O₃ ceramics (with x = 0.01–0.5) were investigated. All the materials were observed to have an ordered A(B_1/2^'B_1/2^")O₃-type perovskite structure; however, the space group of the structure changed from Fm 3 m to Pa 3 as the calcium content increased to x = 0.1, and then from Pa 3 to R 3¯ at the x = 0.5 composition. During the structural evolution, the lattice parameter of the perovskite cell decreased linearly, and the dielectric constant ( k ) also decreased, from k = 80 to k = 38. However, the product of the quality factor and the resonant frequency ( Q × f ) increased from 50 000 GHz to 90 000 GHz as the calcium content increased. Also, the temperature coefficient of resonant frequency (τ_ƒ) gradually changed from 120 ppm/°C to −40 ppm/°C as the calcium content increased. At the x = 0.3 composition, a combination of properties— k ∼ 50, Q × f ∼ 86 000 GHz, and τ_ƒ∼ 0 ppm/°C—can be obtained.     

Origin of Microwave Dielectric Loss in ZnNb2O6-TiO2

(1− x )ZnNb₂O₆· x TiO₂ ceramics were prepared using both anatase and rutile forms of TiO₂. At a composition of x = 0.58, a mixture region of ixiolite (ZnTiNb₂O₈) and rutile was observed and the temperature coefficient of resonant frequency (τ_f) was ∼0 ppm/°C. We found that although ɛ_r and τ_f were comparable, the quality factor ( Q × f , Q ≈ 1/ tan δ, f = resonant frequency) of 0.42ZnNb₂O₆·0.58TiO₂ prepared from anatase and rutile was 6000 and 29 000, respectively. The origin of the difference in Q × f of both samples was investigated by measuring electrical conductivity and by analysis of the anatase–rutile phase transition. The anatase-derived sample had higher conductivity, which was related to the reduction of Ti⁴⁺. It is suggested that the increase of dielectric loss originates from an increase in Ti³⁺ and oxygen vacancies due to an anatase–rutile phase transition.     

Compositional Dependence of Microwave Dielectric Properties in (1 −x)(Na1/2Nd1/2)TiO3−xNd(Mg1/2Ti1/2)O3 Ceramics

The compositional dependence of microwave dielectric properties has been investigated in the (1 − x )(Na_1/2Nd_1/2)TiO₃− x Nd(Mg_1/2Ti_1/2)O₃ (NNT-NMT) system. The addition of NMT results in significant improvement in the quality factor and the temperature coefficient of frequency, but gradually decreases the dielectric constant from ∼100 for pure NNT to ∼25 for pure NMT. The single perovskite phase is observed with various { hkl } superlattice reflections over the entire compositional range. The increasing tendency of peak splitting with increasing x at some perovskite reflections strongly suggests that the crystal structure of the system changes to lower symmetry structures. This is confirmed using infrared reflectivity spectra. The superlattice reflections related to structural deviation become more predominant as the composition reaches pure NMT. Particularly, {111} superlattice reflections are believed to be associated with the 1:1 cation ordering and responsible for the observed abrupt increase in quality factor at x > 0.7.     

Structure and Dielectric Properties of Pb(Sc2/3W1/3)O3–Pb(Zr/Ti)O3 Relaxors

The structure and dielectric properties of (1− x )Pb(Sc_2/3W_1/3)O₃–( x )Pb(Zr/Ti)O₃ ceramics have been investigated over a full substitution range. All compositions with x < 0.5 adopt a cubic perovskite structure; however, for x ≤ 0.25 a doubled cell results from a 1:1 ordered distribution of the B-site cations. The structural order in Pb(Sc_2/3W_1/3)O₃ (PSW) can be described by a random-site model with one cation site occupied by Sc³⁺ and the other by a random distribution of (Sc_1/3³⁺W_2/3⁶⁺). The ordering is destabilized in solid solutions of PSW with PbZrO₃ (PSW–PZ), but stabilized by PbTiO₃ in the (1− x )PSW–( x )PT system. The changes in order are accompanied by alterations in the dielectric response of the two systems. For PSW–PZ the temperature of the permittivity maximum ( T _ɛ,max) increases linearly with x ; however, for PSW–PT T _ɛ,max decreases in the ordered region (up to x = 0.25) and then increases rapidly as the order is lost. Similar effects were produced by modifying the degree of order of (0.75)PSW–(0.25)PT; when the order parameter was reduced from ∼1.0 to ∼0.65, T _ɛ,max increased by more than 60°C.     

Low-Temperature Sintering and Dielectric Properties of Ag(Nb,Ta)O3 Composite Ceramics

The sintering behavior and dielectric properties of perovskite Ag(Nb_{1− x} Ta _x )O₃ (0 < x < 1) solid solutions and two-phase composite assemblages were explored. A small amount of CuO (1 wt%) was used for liquid-phase sintering and led to high densification at temperatures <950°C. The temperature coefficient of capacitance, TCC, was adjusted by varying the Nb:Ta ratio within the solid-solution series and by creating composite microstructures. Two-phase assemblages consisting of Ag(Nb_3/4Ta_1/4)O₃ and Ag(Nb_1/4Ta_3/4)O₃ were synthesized to achieve a temperature-stable dielectric material for high-frequency applications. The composite dielectric with CuO addition had an average dielectric constant of 390 and a Q × f factor of 410 GHz at 2 GHz, with a stable TCC (0 to −180 ppm/°C) in the temperature range from −20° to +60°C. In addition, process compatibility with a silver conductor was confirmed by high-frequency ring-resonator measurements and microstructural characterization. The Ag(Nb_{1− x} Ta _x )O₃ solid solutions and composites are promising candidates as embedded capacitors for radio-frequency/microwave applications.     

Unique Dielectric Behavior of 0.6Pb(Ni1/2W1/2)O3·0.4PbTiO3 Derived from Mechanical Activation

0.6Pb(Ni_1/2W_1/2)O₃·0.4PbTiO₃(0.6PNW·0.4PT) of complex perovskite structure is successfully synthesized by mechanical activation of mixed oxide composition, followed by sintering at 950°C. It exhibits a considerably stable temperature dependence of dielectric constant over the wide temperature range of −120° to 20°C, although there occurs a dielectric peak at around 74°C. Raman spectroscopic studies show the coexistence of tetragonal and pseudocubic perovskite phases on sintering at 950°C, which are attributed to the inhomogeneous distribution of PbTiO₃ arising from mechanical activation. The dielectric behavior can be fine tuned by thermal annealing at 750°C, leading to phase redistribution in PNW-PT.     

Dielectric Properties of the Fluorite-like Bi2O3–Nb2O5 Solid Solution and the Tetragonal Bi3NbO7

Our analysis of the microwave dielectric properties of the δ-Bi₂O₃–Nb₂O₅ solid solution (δ-BN_ss) showed a continuous increase in permittivity and dielectric losses with an increasing concentration of Nb₂O₅. The only discontinuity was found for the temperature coefficient of resonant frequency, which is negative throughout the entire homogeneity range but reaches a minimum value for the sample with 20 mol% Nb₂O₅. At the same composition there is a discontinuity in the grain size of the δ-BN_ss ceramics. For the sample containing 25 mol% Nb₂O₅ two structural modifications were observed. A single-phase tetragonal Bi₃NbO₇, in the literature referred to as a Type-III phase, is formed in a very narrow temperature range from 850° to 880°C. A synthesis performed below or above this temperature range resulted in the formation of the end member of the δ-BN_ss homogeneity range. Compared with the δ-BN_ss the Bi₃NbO₇ ceramics exhibit lower microwave dielectric losses, an increased conductivity, and a positive temperature coefficient of resonant frequency.     

Microwave Characteristics of A(B3+1/2B5+1/2)O3 Ceramics (A = Ba, Ca, Sr; B3+= La, Nd, Sm, Yb; B5+= Nb, Ta)

Dielectric properties of A(B³⁺_1/2B⁵⁺_1/2)O₃ (A = Ba, Ca, Sr; B³⁺= La, Nd, Sm, Yb; B⁵⁺= Nb, Ta) ceramics have been investigated at microwave frequencies. Sr(B³⁺_1/2B⁵⁺_1/2)O₃ and Ca(B³⁺_1/2B⁵⁺_1/2)O₃ ceramics have relative dielectric constants (ε _r ) above 20 and negative temperature coefficients of resonant frequency (T _f ). In the group of Ba(B³⁺_1/2B⁵⁺_1/2)O₃ ceramics, T _f changes from + 118 ppm/° to nearly zero according to the kinds of B-site ions. Among the ceramics investigated, Sr(Sm_1/2Ta_1/2)O₃ ceramics have the highest Q values at microwave frequencies. For Sr(Sm_1/2Ta_1/2)O₃ ceramics Q = 7000, ε _r = 27.7, and T _f =−62.5 ppm/° at 8.5 GHz. The microstructure of Sr(Sm_1/2Ta_1/2)O₃ ceramics is composed of a matrix of the ternary compound (Sr-Sm-Ta-O system) and secondary phase grains of the binary compound (Sm-Ta-O system).