Fabrication of hollow N-doped carbon supported ultrathin NiO nanosheets for high-performance supercapacitor

The polydopamine-assisted hierarchical composites of ultrathin NiO nanosheets uniformly coating on the surface of hollow nitrogen-doped carbon spheres (HNCS-NiO) were successfully fabricated via a facile synthesis method. The hierarchical HNCS-NiO composites as electrode materials for supercapacitors exhibit high capacitance of 550.4 F g^− 1 (880.6 mF cm^− 2) at the current density of 0.5 A g^− 1 (0.8 mA cm^− 2), and present a good rate capability. The composites display excellent improved electrochemical properties not only because their hierarchical hollow nanostructures can provide enough space to buffer the volume expansion during the reversible intercalation/deintercalation processes, but also because their larger specific surface areas can provide adequate active sites for the redox electrochemical reaction.     

Preparation and electrochemical performance of SnO2@carbon nanotube core–shell structure composites as anode material for lithium-ion batteries

Carbon nanotube-encapsulated SnO₂ (SnO₂@CNT) core–shell composite anode materials are prepared by chemical activation of carbon nanotubes (CNTs) and wet chemical filling. The results of X-ray diffraction and transmission electron microscopy measurements indicate that SnO₂ is filled into the interior hollow core of CNTs and exists as small nanoparticles with diameter of about 6 nm. The SnO₂@CNT composites exhibit enhanced electrochemical performance at various current densities when used as the anode material for lithium-ion batteries. At 0.2 mA cm^?2 (0.1C), the sample containing wt. 65% of SnO₂ displays a reversible specific capacity of 829.5 mAh g^?1 and maintains 627.8 mAh g^?1 after 50 cycles. When the current density is 1.0, 2.0, and 4.0 mA cm^?2 (about 0.5, 1.0, and 2.0C), the composite electrode still exhibits capacity retention of 563, 507 and 380 mAh g^?1, respectively. The capacity retention of our SnO₂@CNT composites is much higher than previously reported values for a SnO₂/CNT composite with the same filling yield. The excellent lithium storage and rate capacity performance of SnO₂@CNT core–shell composites make it a promising anode material for lithium-ion batteries.     

Encapsulation of manganese oxides nanocrystals in electrospun carbon nanofibers as free-standing electrode for supercapacitors

Flexible composites with manganese oxides (MnO_x) nanocrystals encapsulated in electropun carbon nanofibers were successfully fabricated via a simple and practical combination of electrospinning and carbonization process. The as-formed MnO_x/carbon nanofibers composites have a rough surface with MnO_x nanoparticles well embedded in the carbon nanofibers backbones. When used as electrodes for supercapacitor, the resulting MnO_x/carbon nanofiber composites exhibit good electrochemical performance with a specific capacitance of 174.8 F g⁻¹ at 2 mV s⁻¹ in 0.5 M Na₂SO₄ electrolyte, a good rate capability at high current density and long-term cycling stability. It is expected that such freestanding composites could be promising electrodes for high-performance supercapacitors.     

Studies on structural,morphological, electrical and electrochemical properties of activated carbon prepared from sugarcane bagasse

Activated carbon composite was prepared from sugarcane bagasse. The X-ray diffraction revealed the evolution of crystallites of carbon and silica during activation at higher temperature. FTIR spectrum shows the presence of functional groups and silica in the carbon composite. The morphology of the carbon sample was determined by SEM. The surface area, pore volume and pore size distribution of carbon composites were measured. The dc conductivity was determined and conductivity at room temperature was found to increase from 10.22 × 10^?3 to 25.131 × 10^?3 S cm^?1. The samples show good electrochemical property and the specific capacitance in the range of 92–340 F g^?1.     

Three-dimensional wire-in-tube hybrids of tin dioxide and nitrogen-doped carbon for lithium ion battery applications

Design and fabrication of tin dioxide/carbon composites with peculiar nanostructures have been proven to be an effective strategy for improving the electrochemical performance of tin dioxide-based anode for lithium-ion batteries, and thus have attracted extensive attention. Herein, we have successfully prepared a uniquely three-dimensional and interweaved wire-in-tube nanostructure of nitrogen-doped carbon nanowires encapsulated into tin dioxide@carbon nanotubes, denoted as NCNW@void@SnO₂@C, via a facile and novel approach for the first time. Interestingly, one-dimension void space located between nitrogen-doped carbon nanowires and innermost wall of tin dioxide@carbon tubes is also formed. The possible formation mechanism of wire-in-tube nanostructure is also discussed and determined by transmission electron microscopy, X-ray diffraction measurement, laser Raman spectroscopy and X-ray photoelectron spectroscopy characterizations. This unique NCNW@void@SnO₂@C fully combines all the advantages of using a three-dimensional architecture, hollow structure, carbon coating, and a mechanically robust carbon nanowires support, thus exhibiting an excellent electrochemical performance as promising anode materials for lithium-ion batteries. A high reversible capacity of 721.3 mAh g⁻¹ can be remained even after 500 cycles at a current density of 200 mA g⁻¹, as well as a capacity of 456.7 mAh g⁻¹ is obtained even at 3000 mA g⁻¹.     

A simple approach for fabrication of interconnected graphitized macroporous carbon foam with uniform mesopore walls by using hydrothermal method

Three-dimensional (3D) highly interconnected graphitized macroporous carbon foam with uniform mesopore walls has been successfully fabricated by a simple and efficient hydrothermal approach using resorcinol and formaldehyde as carbon precursors. The commercially available cheap polyurethane (PU) foam and Pluronic F127 were used as a sacrificial polymer and mesoporous structure-directing templates, respectively. The graphitic structure of carbon foam was obtained by catalytic graphitization method using iron as catalyst. Three different carbon foams such as graphitized macro-mesoporous carbon (GMMC) foam, amorphous macro-mesoporous carbon (AMMC) foam and graphitized macroporous carbon (GMC) foam were fabricated and their physicochemical and mechanical properties were systematically measured and compared. It was found that GMMC possess well interconnected macroporous structure with uniform mesopores located in the macroporous skeletal walls of continuous framework. Besides, GMMC foam possesses a well-defined graphitic framework with high surface area (445 m²/g), high pore volume (0.35 cm³/g), uniform mesopores (3.87 nm), high open porosity (90%), low density (0.30 g/cm³) with good mechanical strength (1.25 MPa) and high electrical conductivity (11 S/cm) which makes it a promising material for many potential applications.     

A hierarchical carbon fiber/sulfur composite as cathode material for Li–S batteries

A novel hierarchical structure carbon/sulfur composite is presented based on carbon fiber matrices, which are synthesized by electrospinning. The fibers are constituted with hollow graphitized carbon spheres formed using catalytic Ni nano-particles as hard templates. Sulfur is loaded to the carbon substrates via thermal vaporization. The structure and composition of the hierarchical carbon fiber/S composite are characterized with X-ray diffraction, scanning electron microscopy, transmission electron microscopy, Raman spectroscopy, and nitrogen adsorption isotherms. The electrochemical performance is evaluated by cyclic voltammetry and galvanostatic charge–discharge. The results exhibit an initial discharge capacity of 845 mA h g⁻¹ at 0.25 C (420 mA g⁻¹), with a retention of 77% after 100 cycles. A discharge capacity of 533 mA h g⁻¹ is still attainable when the rate is up to 1.0 C. The good cycling performance and rate capability are contributed to the uniform dispersion of sulfur, the conductive network of carbon fibers and hollow graphitized carbon spheres.     

Promising graphene/carbon nanotube foam@π-conjugated polymer self-supporting composite cathodes for high-performance rechargeable lithium batteries

Three-dimensional (3D) graphene foam materials are highly favored due to large accessible surface and excellent conductive network, which can be commendably applied as self-supporting electrodes for advanced rechargeable lithium batteries (RLBs). Here, promising graphene nanosheets/acid-treated multi-walled carbon nanotubes (GNS/aMWCNT)-supported 1,5-diaminoanthraquinone (DAA) organic foams [oGCTF(DAA)] are prepared by organic solvent displacement method followed by solvothermal reaction. And then electrochemical polymerization is carried out to obtain 3D porous GNS/aMWCNT organic foam-supported poly(1,5-diaminoanthraquinone) (oGCTF@PDAA) nanocomposites, which achieves the ordered growth of homogeneous PDAA nanoparticles on GNS/aMWCNT surface due to the role of oGCTF(DAA). Such structure largely improves PDAA utilization, facilitates charge transportation and suppresses the dissolution of PDAA. As a result, the oGCTF@PDAA cathode for RLBs delivers a high discharge capacity of 289 mAh g⁻¹ at 30 mA g⁻¹ and still retains 122 mAh g⁻¹ at extreme 10 A g⁻¹ for rapid charging/discharging. Moreover, superior cycling stability is achieved with only 14.8% capacity loss after 2000 cycles even at a high current density of 1 A g⁻¹.     

Fabrication and properties of lightweight SiOC modified carbon-bonded carbon fiber composites

SiOC modified carbon-bonded carbon fiber composites (CBCFs) with densities of 0.38, 0.61, 0.94 g cm⁻³ were prepared by precursor infiltration and pyrolysis method using dimethoxydimethylsilane and methyltrimethoxysilane as precursors. The densification behavior was investigated by analyzing the microstructure of CBCF-SiOC (CS) composites with different densities. The mechanical properties and oxidation resistance of the CS composites were studied. Results indicate that the CS composites with the density of 0.94 g cm⁻³ exhibit better mechanical and anti-oxidation properties.     

Preparation of hollow mesoporous silica spheres by a sol–gel/emulsion approach

Hollow mesoporous silica spheres were synthesized by a sol–gel/emulsion (oil-in-water/ethanol) approach, in which cetyltrimethylammonium bromide (CTAB) surfactant was employed to stabilize and direct the hydrolysis of oil droplets of tetraethoxysilane (TEOS). The diameters of the hollow spheres can be tuned in the range from 210 to 720 nm by varying the ratio of ethanol-to-water and their shell thickness can be mediated by changing the concentration of CTAB used in the system. BET surface areas of the hollow silica spheres are determined to be in the range of 924–1766 m² g^?1 and their pore sizes are around 3.10 nm as determined by BJH method.     

Synthesis and electrochemical properties of artificial graphite as an anode for high-performance lithium-ion batteries

Artificial graphite containing abundant in situ grown onion-like carbon hollow nanostructures (OCHNs) was prepared from nickel nanoparticles doped pitch and natural graphite flakes by hot-pressing sintering method. Galvanostatic discharge–charge tests indicate that the synthetic graphite with abundant OCHNs exhibits a high specific capacity of 460 mA h g⁻¹ at 20 mA g⁻¹ as well as an excellent rate capability, with a reversible capacity of 220 mA h g⁻¹ at 1 A g⁻¹. Besides the advantages of common graphite anode materials, these superiorities make synthetic graphite a very promising anode for high-performance lithium-ion batteries.     

Template synthesis of hollow carbon spheres anchored on carbon nanotubes for high rate performance supercapacitors

A carbon material consisting of hollow carbon spheres anchored on the surface of carbon nanotubes (CNT–HCS) has been synthesized by an easy chemical vapor deposition process using a CNT–MnO₂ hybrid as template. An electrode made of this material exhibits a maximum specific capacitance of 201.5 F g⁻¹ at 0.5 A g⁻¹ and excellent rate performance (69% retention ratio at 20 A g⁻¹). It has impressive cycling stability with 90% initial capacitance retained after 5000 cycles at 5 A g⁻¹ in 6 mol L⁻¹ KOH. Symmetric supercapacitors based on CNT–HCS achieve a maximum energy density of 11.3 W h kg⁻¹ and power density of 11.8 kW kg⁻¹ operated within a wide potential range of 0–1.6 V in 1.0 mol L⁻¹ Na₂SO₄ solution.     

Activated carbon xerogels with a cellular morphology derived from hydrothermally carbonized glucose-graphene oxide hybrids and their performance towards CO2 and dye adsorption

We report the preparation of micro-/mesoporous carbon monolithic xerogels by means of a two-step approach that comprises (1) hydrothermal carbonization of glucose in the presence of graphene oxide (GO) sheets as morphology-directing agents and (2) chemical activation of the resulting hydrothermal carbon (HTC) xerogels with KOH. The as-prepared HTC xerogels were made up of a random assembly of thin (<30 nm) carbon platelets, which were interpreted to arise via dehydration and condensation reactions of glucose at catalytically active (acidic) sites present on the surface of GO. The chemical activation afforded xerogels with large surface areas and pore volumes (up to ∼2000 m² g⁻¹ and 1.15 cm³ g⁻¹, respectively) and a cellular morphology, which could be attributed to the combined effect of the activating agent and the unusual, compliant nature of the HTC xerogel. Additionally, the use of different activation conditions allowed fine-tuning the porous texture of the activated xerogels. Finally, the activated carbon xerogels displayed CO₂ uptake capacities up to 4.9 mmol g⁻¹ at 0 °C and 1 bar, as well as an efficient performance (between 600 and 700 mg g⁻¹) in the adsorption of bulky dyes, thus demonstrating their application potential.     

Hollow core–shell ZnMn2O4 microspheres as a high-performance anode material for lithium-ion batteries

The hollow core–shell ZnMn₂O₄ microspheres are successfully prepared by a solvothermal carbon templating method and then a annealing process. The crystal phase and particle morphology of resultant ZnMn₂O₄ microspheres are characterized by XRD and TEM. The electrochemical properties of the ZnMn₂O₄ microspheres as an anode material are investigated for lithium ion batteries. The results show that the ZnMn₂O₄ microspheres exhibit a reversible capacity of 855.8 mA h g⁻¹ at a current density of 200 mA g⁻¹ after 50 cycles. Even at 1000 mA g⁻¹, the reversible capacity of the ZnMn₂O₄ microspheres is still kept at 724.4 mA h g⁻¹ after 60 cycles. The enhanced electrochemical performance suggests the promising potential of the hollow core–shell ZnMn₂O₄ microspheres in lithium-ion batteries.     

Composites of V2O3–ordered mesoporous carbon as anode materials for lithium-ion batteries

The composites of V₂O₃–ordered mesoporous carbon (V₂O₃–OMC) were synthesized and used as anode materials for Li-ion intercalation. These materials exhibited large reversible capacity, high rate performance and excellent cycling stability. For instance, a reversible capacity of V₂O₃–OMC composites was 536 mA h g⁻¹ after 180 cycles at a current density of 0.1 A g⁻¹. The high electrochemical performance of the V₂O₃–OMC composites is attributed to the anchoring of nanoparticles on mesoporous carbon for improving the electrochemical active of V₂O₃ particles for energy storage applications in high performance lithium-ion batteries.     

Synthesis and characterization of a cross-linkable nonlinear optical polymer functionalized with a thiophene- and tricyanovinyl-containing chromophore

This paper reports a novel nonlinear optical polymer BP-AVT-TCV functionalized with a thiophene- and tricyanovinyl-substituted chromophore. BP-AVT-TCV was synthesized by the post-tricyanovinylation of an epoxy-based precursor polymer BP-AVT, and had a high molar functionalization degree of chromophore (70 mol.%). It had an enhanced glass transition temperature (T_g = 164 °C) compared with BP-AVT (T_g = 114 °C), and a high decomposition temperature (T_d,5% = 295 °C). BP-AVT-TCV was further cross-linked to achieve the three-dimensional (3D) network of thermosetting polyurethane (PU). The poled PU films revealed an electro-optic (EO) coefficient (γ₃₃) value of 21 pm/V at a wavelength of 1315 nm. The structures of the polymers were confirmed by FT-IR, UV–Vis, and ¹H NMR spectra.     

Superhigh-rate capacitive performance of heteroatoms-doped double shell hollow carbon spheres

The salient practical application feature of an ideal supercapacitor is its ability to deliver high energy density stably even at ultrahigh power density. Therefore, a rational design of electrode materials is essentially required for achieving high current, energy and power densities. In this work, a special “in situ replicating” strategy is employed to fabricate double shell hollow carbon spheres with homogeneously doped heteroatoms. The KOH activation introduces micropores to the thin shells of the hollow carbon spheres. Materials characterizations show that these carbon spheres have such merits as large surface area, easy-accessible micropore surface with faradaic reaction sites, and high conductivity. All these result in ultrafast ion transport from electrolyte to the micropores in the carbon spheres and endow the carbon with outstanding capacitive performance, e.g., an unprecedentedly high specific capacitance of 270 F g⁻¹ at a very high current density of 90 A g⁻¹. Moreover, a high energy density of 11.9 Wh kg⁻¹ at a respectable power density of 30,000 W kg⁻¹ is achieved in 6 M KOH electrolyte.     

Properties of LiCoPO4-non-graphitic carbon foam composites

The properties of LiCoPO₄-non-graphitic carbon foams (LCP-NGCF) composites are reported. The composites are treated at 300 °C for different times (t, from 0 to 12 h) in air, then at 730 °C for 12 h in nitrogen. The diffraction analysis revealed LiCoPO₄ as major crystalline phase, Li₄P₂O₇ and Co₂P (t = 0 h), Co₂P (t > 0 h) as secondary phases. The morphology consists of crystalline “islands” with spongy-like features on the surface (for t = 0 h) and with acicular crystallites of different dimensions (2–20 μm) for t ≥ 0.1 h. The voltammetric curves show reduction potential values between 4.40 V and 4.60 V. The LCP-NGCF composites deliver a discharge specific capacity of 100 mAh g⁻¹ (t = 0 h, discharge rate of C/25 and RT) and of 65 mAh g⁻¹ (t > 0 h). The ac-impedance analysis reveal the formation of SEI-layer after high annealing times, which disfavors the kinetics of the Li-(de)intercalation processes.     

Graphite foam from pitch and expandable graphite

Graphite foams were prepared from a coal tar pitch that was partially converted into mesophase. Expandable graphite was used instead of an inert gas to “foam” the pitch. The resulting foam was subjected to a series of heat treatments with the objective of first crosslinking the pitch, and thereafter carbonizing and graphitizing the resulting foam. XRD confirmed that the graphitization at 2600 °C resulted in a highly graphitic material. The porosity of this foam derives from the loose packing of the vermicular exfoliated graphite particles together with their internal porosity. During the foaming process the pitch tends to coat the outside surface of the expanding graphite flakes. It also bonds them together. The graphite foam prepared with 5 wt.% expandable graphite had a bulk density of 0.249 g cm⁻³, a compressive strength of 0.46 MPa and a thermal conductivity of 21 W m⁻¹ K⁻¹. The specific thermal conductivity (thermal conductivity divided by the bulk density) of this low-density carbon foam was 0.084 W m² kg⁻¹ K⁻¹ which is considerably higher than that of copper metal (0.045 W m² kg⁻¹ K⁻¹) traditionally used in thermal management applications.