Thermodynamic studies of phosphate adsorption on Pt(1 1 1) electrode surfaces in perchloric acid solutions

The thermodynamics of the so-called perfectly polarizable electrode was employed to analyze the total charge densities for a nearly defect-free Pt(1 1 1) electrode in a series of NaH₂PO₄ solutions with an excess of inert electrolyte (0.1 M HClO₄) at constant ionic strength and pH. Thermodynamic analysis using both electrode potential and charge density as independent electrical variables is described. The Gibbs excess, Gibbs energy of adsorption and charge numbers both at constant electrode potential and constant chemical potential for anion adsorption at the Pt(1 1 1) surface have been determined. The calculated electrosorption valencies and charge numbers at constant chemical potential are close to two electrons per adsorbed anion, suggesting that in the absence of co-adsorbed species, HPO₄²⁻ is the predominant adsorbed species. The maximum Gibbs excess of adsorbed hydrogenphosphate attains a value of ≈3.2 × 10¹⁴ ions cm⁻² which corresponds to a coverage of ≈0.22 ML.     

A comparative study on the selective hydrogenation of α,β unsaturated aldehyde and ketone to unsaturated alcohols on Au supported catalysts

The hydrogenation of trans,4-phenyl,3-buten,2-one (benzalacetone) and trans,3-phenyl, propenal (cinnamaldehyde) was carried out on Au supported on iron oxides catalysts. Commercial goethite (FeOOH), maghemite (γFe₂O₃) and hematite (αFe₂O₃) were used as supports. The catalytic activity of Au/Fe₂O₃ reference catalyst, supplied by the World Gold Council, was also investigated. Gold catalysts and the parent supports were characterized by BET, X-ray diffraction (XRD), temperature programmed reduction (TPR), temperature programmed desorption of ammonia (NH₃-TPD) and high resolution transmission electron microscopy (HRTEM).Among the catalysts investigated Au supported on FeOOH shows the highest activity and selectivity to UA in the hydrogenation of unsaturated carbonyl compounds whereas Au supported on αFe₂O₃ are the less active and selective catalysts.The catalytic activity and selectivity to unsaturated alcohols (UA) in the hydrogenation of benzalacetone and cinnamaldehyde are less influenced by the morphology of gold particles and are mainly influenced by the nature of the support.A correlation between the reducibility of the catalysts and the activity and selectivity to UA has been found. Increasing the reducibility of the catalysts both the activity and selectivity to UA increase. These results let us to argue that active and selective sites are formed by negative gold particles formed through the electron transfer from the reduced support to the metal.     

Vibrational Stark tuning rates from periodic DFT calculations: CO/Pt(1 1 1)

DFT periodic calculations have been used to study the influence of an external electric field on the adsorption of CO on Pt(1 1 1). Particular attention has been focused on the determination of the CO and metal-CO vibrational Stark tuning rates. Stark tuning rates have been calculated at various CO coverages; a linear dependence between the CO Stark tuning rate and the CO surface coverage has been found. We have calculated a value of 68.94 cm⁻¹/(V/Å) for the zero-coverage limit CO Stark tuning rate, in good agreement with the experimental value of 75 ± 9 cm⁻¹/(V/Å). Like the CO Stark tuning rate, the metal-CO vibrational Stark tuning rate also increases as CO surface coverage decreases. In addition, we have found (at 0.25 ML) that the CO Stark tuning rate is similar at different adsorption sites, being only slightly larger at high-coordinated sites. CO vibrational Stark tuning rates of 45.58, 47.96, 47.61 and 48.49 cm⁻¹/(V/Å) have been calculated for ontop, bridge, hcp and fcc hollow sites, respectively. Calculations at high coverage using a (2 × 2)-3CO model yield a CO Stark tuning rate of 21.08 and 25.93 cm⁻¹/(V/Å) for ontop and three-fold hollow CO, respectively. These results show that the CO Stark tuning rate for CO adsorbed at high coordinated sites is only slightly larger than that at ontop sites. This result is in contradiction with experiments, which reported larger CO Stark tuning rates at high-coordinates sites than at ontop sites. Furthermore, the calculated metal-CO stretch is larger for ontop sites than for high-coordinated sites; this result is in disagreement with previous DFT cluster model calculations. Unfortunately, there is not experimental information available to support either result. Finally, we have also studied the CO adsorption site preference dependence on electric fields. We have found that CO adsorbs preferentially at high coordinated sites at more negative fields, and at ontop sites at more positive fields, in agreement with previous experiments and DFT cluster model calculations.     

Comparison of H2 production from ethanol and ethylene glycol on M/Pt(1 1 1) (M = Ni, Fe, Ti) bimetallic surfaces

The reactions of ethylene glycol and ethanol have been studied on Fe/Pt(1 1 1) and Ti/Pt(1 1 1) bimetallic surfaces utilizing temperature programmed desorption (TPD). These results are compared to our previous studies on Ni/Pt(1 1 1) to illustrate the trend in the reforming activity on 3d-Pt bimetallic surfaces. The oxygenates decomposed on these surfaces to produce mainly H₂ and CO. The bimetallic surfaces were prepared by thermal evaporation of Fe or Ti onto Pt(1 1 1), using Auger electron spectroscopy (AES) to monitor surface compositions. Surfaces prepared by deposition of a monolayer of Fe or Ti on Pt(1 1 1), designated Fe–Pt–Pt(1 1 1) or Ti–Pt–Pt(1 1 1), displayed higher reforming activity for both ethylene glycol and ethanol than the corresponding subsurface monolayer Pt–Fe–Pt(1 1 1) and Pt–Ti–Pt(1 1 1) structures or clean Pt(1 1 1). The reforming yield increased as the surface d-band center, calculated from density functional theory (DFT), shifted closer to the Fermi level. The reforming selectivity of oxygenates, especially ethanol, began to decrease as the d-band center shifted closer to the Fermi level. Combining results in the current work with previous studies on Ni/Pt(1 1 1), a general criterion can be formulated for selecting 3d-Pt bimetallic surfaces with desirable reforming activity and selectivity.     

Cationic copolymers of α,β‐poly‐(N‐2‐hydroxyethyl)‐DL‐aspartamide (PHEA) and α,β‐polyasparthylhydrazide (PAHy): synthesis and characterization

In the present study the derivatization of two water‐soluble synthetic polymers, α,β‐poly(N‐2‐hydroxyethyl)‐DL ‐aspartamide (PHEA) and α,β‐polyasparthylhydrazide (PAHy), with glycidyltrimethylammonium chloride (GTA) is described. This reaction permits the introduction of positive charges in the macromolecular chains of PHEA and PAHy in order to make easier the electrostatic interaction with DNA. Different parameters affect the reaction of derivatization, such as GTA concentration and reaction time. PHEA reacts partially and slowly with GTA; on the contrary the reaction of PAHy with GTA is more rapid and extensive. The derivatization of PHEA and PAHy with GTA is a convenient method to introduce positive groups in their chains and it permits the preparation of interpolyelectrolyte complexes with DNA. © 2000 Society of Chemical Industry     

Interface formation of Ca with poly(p-phenylene α,α′-diphenyl vinylene) and poly(p-phenylene α-phenyl vinylene)

We have investigated the interface formation of Ca with poly(p-phenylene α,α′-diphenyl vinylene) (PPV-DP) and poly(p-phenylene α-phenyl vinylene) (PPV-P) using X-ray photoemission spectroscopy (XPS). Similarly to our earlier findings in metal/PPV interface formation, the O 1s peak shifted toward a lower binding energy as soon as Ca was deposited on to the polymers. This was accompanied by the formation of Ca? O, suggesting a chemical origin for the O 1s shift. By contrast, the C 1s peak shift toward a lower binding energy was observed relatively later, after about 4 Å of Ca deposition. At the same time, a new C 1s component became noticable at about ?1.5 eV relative to the initial C 1s peak. This component signifies the possibility of polymer disruption by the Ca atoms to form Ca? C species. The C 1s peak shift is attributed to Ca induced surface band bending and barrier formation as in the case of metal/PPV interface formation. The disruption of the polymer may also induce changes in the interface electronic states and contribute to the C 1s peak shift. From the intensity attenuation analysis, we conclude that the initial 15 Å of Ca overlayer is contaminated by the Ca? O and Ca? C species and the overlayer is pure beyond 15 Å of Ca coverage.     

Ethanol electro-oxidation over Pt(h k l): Comparative study on the reaction intermediates probed by FTIR and SFG spectroscopies

We have investigated the adsorbed intermediates of ethanol electro-oxidation at Pt(1 1 1), Pt(1 0 0) and Pt(1 1 0) using FTIR and SFG spectroscopies. Mainly, we focus on the CO formation. The aim of the present work is to compare the responses coming from two different surface probes: FTIR spectroscopy and SFG spectroscopy. Between 1800 cm⁻¹ and 2300 cm⁻¹, our FTIR and SFG results are in good agreement. Specifically in the case of the ethanol/Pt(1 1 1) interface, the SFG spectroscopy presents higher sensibility to the interface response compared to the FTIR spectroscopy.     

From single crystals to supported nanoparticles in experimental and theoretical studies of H2 oxidation over platinum metals (Pt, Pd): Intermediates, surface waves and spillover

The present paper reviews our investigations concerning the mechanism of H₂ + O₂ reaction on the metal surfaces (Pt, Pd) at different structures: single crystals (Pt(1 1 1), Pt(1 0 0), Pd(1 1 0)); microcrystals (Pt tips); and nanoparticles (Pd–Ti³⁺/TiO₂). Field electron microscopy (FEM), field ion microscopy (FIM), high-resolution electron energy loss spectroscopy (HREELS), XPS, UPS, work function (WF), TDS and temperature-programmed reaction (TPR) methods have been applied to study the kinetics of H₂ oxidation on a nanolevel. The adsorption of both O₂ and H₂ and several dissociative products (H_ads, O_ads, OH_ads) was studied by HREELS. Using the DFT technique the equilibrium states and stretching vibrations of H, O, OH, H₂O, adsorbed on the Pt(1 1 1) surface, have been calculated depending on the surrounding of the metal atoms. Sharp tips of Pt, several hundreds angstroms in radius, were used to perform in situ investigations of the dynamic surface processes. The FEM and FIM studies on the Pt-tip surface demonstrate that the self-oscillations and waves propagations are connected with periodic changes in the surface structure of nanoplane (1 0 0)-(hex) ↔ (1 × 1), varying the catalytic property of metal. The role of defects (Ti³⁺-□_O) in the adsorption centers formation, their stabilization by the palladium nanoparticles, and then the defects participation in H₂ + O₂ steady-state reaction over Pd–Ti³⁺/TiO₂ surface have been studied by XPS, UPS and photodesorption techniques (PhDS). This reaction seems to involve the “protonate” hydrogen atoms (H⁺/TiO_x) as a result of spillover effect: diffusion of H_ads atoms from Pd particles on a TiO_x surface. The comprehensive study of H₂, O₂ adsorption and H₂ + O₂ reaction in a row: single crystals → tips → nanoparticles has shown the same nature of active centers over these metal surfaces.     

An Efficient Cobalt(I)‐Catalysed Reformatsky Reaction using α‐Chloro Esters

An efficient cobalt(I )‐catalysed Reformatsky reaction using α‐chloro esters has been developed. The catalyst is prepared by reducing the cobalt(II ) chloride (5 %)/1,2‐bis(diphenylphosphino)ethane (dppe)(5 %)/zinc iodide (10 %) system with zinc metal in acetonitrile in the presence of both the α‐chloro ester and the carbonyl compound; good to excellent conversions to β‐hydroxy esters are obtained at room temperature in 2.5 h.     

Ionic Liquid, 1‐n‐Butyl‐3‐methylimidazolium Bis(trifluoromethanesulfonyl)imide,Resulted in the First Catalyst‐Free Aminohalogenation of Electron‐Deficient Alkenes

The 2‐Ns‐based aminohalogenation of α,β‐unsaturated ketones has been achieved in an ionic liquid, 1‐n‐butyl‐3‐methylimidazolium bis(trifluoromethanesulfonyl)imide {[bmim][N(SO₂CF₃)₂]}. [Bmim][N(SO₂CF₃)₂] was found to be superior not only to classical organic solvents but also to its counterpart, [bmim][BF₄], which was proven to be successful in the TsNCl₂‐based aminohalogenation but failed to give any product for this reaction. The present process takes the advantage of 2‐NsNCl₂ as the stable nitrogen/halogen source in a one‐pot operation without the use of any metal catalysts, it is convenient to perform without special protection of inert gases. Eight examples were examined with good to excellent stereoselectivity (1:5 to one isomer) and modest to good chemical yields (53–72 %).     

Bis(3,5‐dimethylphenyl)‐(S)‐pyrrolidin‐2‐ylmethanol: an Improved Organocatalyst for the Asymmetric Epoxidation of α,β‐Enones

The asymmetric epoxidation of α,β‐enones by the readily available bis(3,5‐dimethylphenyl)‐(S)‐pyrrolidin‐2‐ylmethanol and tert‐butyl hydroperoxide (TBHP) is described. Stereoelectronic substitution on the aryl moiety of diaryl‐2‐pyrrolidinemethanols was found to significantly affect the efficiency with respect to the previously reported (S)‐diphenyl‐2‐pyrrolidinemethanol. Improved reactivity and enantioselectivity were achieved with bis(3,5‐dimethylphenyl)‐(S)‐pyrrolidin‐2‐ylmethanol at reduced catalyst loading (20 mol %) with ees up to 94% for chalcone epoxides under mild reaction conditions, whereas (S)‐diphenyl‐2‐pyrrolidinemethanol afforded a maximum ee of 80%. Interestingly, the methodology is applicable to the epoxidation of more challenging aliphatic or enolizable enones with good control of the asymmetric induction (up to 87% ee).     

Selectivity aspects in the multi-phase hydrogenation of α,β-unsaturated aldehydes over supported noble metal catalysts: Part II

The hydrogenation of cinnamaldehyde to cinnamyl alcohol over a platinum on carbon catalyst could be intensified and made more selective in a two-phase system using toluene and aqueous alkaline solution. Enhancement in the selectivity with respect to citronellol was noticed in the two-phase hydrogenation of citronellal, while the reaction rate was marginally affected. Potassium hydroxide and sodium hydroxide were found to be efficient promoters.     

The influence of various reaction parameters on the performance of (α‐diimine)nickel(II) catalysts in ethylene oligomerization reactions

Modified (α‐diimine)nickel(II) catalysts are suitable for ethylene oligomerization reactions. Due to the mechanism (“chain running”), the formation of double‐bond isomers and branched olefins can be observed. The obtained oligomer mixtures show a Schulz–Flory distribution. Increasing ethylene pressure favors the selectivity of α‐olefin formation. The same effect can be observed when Lewis bases like thiophene or furane are added to the oligomerization reaction mixture. These results can be related to an interaction of the additives with the catalytic active species during the oligomerization process. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1356–1361, 2003     

Enzyme-based bioartificial polymeric materials: the α-amylase–poly(vinyl alcohol) system

The possibility of realizing bioartificial polymeric materials from blends of the enzyme α-amylase (EC 3.2.1.1) and poly(vinyl alcohol), in the form of film and hydrogel, was investigated. The interactions at molecular level between the enzyme and the synthetic polymer have been studied by calorimetry, X-ray diffractometry and morphological analysis. A certain degree of interaction through which the α-amylase molecules influence the crystallinity of the poly(vinyl alcohol) was observed. The thermal stability of the enzyme in the blends was enhanced, while its biological activity did not vary significantly. In addition, hydrogels prepared by a freeze–thawing method can be considered suitable for manufacturing delivery systems capable of releasing enzymes which maintain their full biological activity. ©1997 SCI     

A Convenient Synthesis of 2,2′,6,6′‐Tetramethoxy‐ 4,4′‐bis(dicyclohexylphosphino)‐3,3′‐bipyridine (Cy‐P‐Phos): Application in Rh‐Catalyzed Asymmetric Hydrogenation of α‐(Acylamino)acrylates

The first example of the synthesis of an axially chiral bis(aryldicyclohexylphosphine) dioxide via catalytic hydrogenation of the optically resolved parent bis(aryldiphenylphosphine) dioxide was reported. The procedure for the synthesis of Cy‐P‐Phos ( 4d ) has thus successfully avoided the need for an otherwise lengthy synthetic route owing to the π‐excessive nature of one of the aryl groups in the latter. The use of Cy‐P‐Phos in the Rh(I)‐catalyzed asymmetric hydrogenation of the derivatives of methyl (Z)‐2‐acetamidocinnamate gave significantly higher rates of reaction as compared to the use of the previously reported optimal ligand Xyl‐P‐Phos ( 4c ) whilst the level of enantioselectivity was essentially maintained.     

In situ radiotracer and voltammetric study of the formation of surface adlayers in the course of Cr(VI) reduction on polycrystalline and (1 1 1) oriented platinum

This paper is focused on the in situ radiotracer and voltammetric studies of the induced HSO₄⁻/SO₄²⁻ adsorption at Pt(poly) and Pt(1 1 1) surfaces in 0.1 mol dm⁻³ HClO₄ solution in the course of Cr(VI) electroreduction. Besides this, the sorption behavior of HSO₄⁻/SO₄²⁻ ions on bare Pt(poly) and Pt(1 1 1) electrodes is compared and discussed. From the experimental results it can be stated that: (i) although the extent of bisulfate/sulfate adsorption is strongly dependent upon the crystallographic orientation of Pt surfaces, the maximum coverage on the Pt(1 1 1) does not exceed 0.2 monolayer; (ii) the Cr(VI) electroreduction on both poly- and (1 1 1) oriented platinum proceeds via a ce (chemical-electron-transfer) mechanism to yield Pt surfaces covered with intermediate surface adlayers containing Cr(VI) particles (and reduced Cr-containing adspecies) and ‘strongly bonded’ HSO₄⁻/SO₄²⁻ ions; (iii) while the coverage of platinum surfaces by the intermediate complexes formed in the course of Cr(VI) electroreduction at E > 0.20 V is basically independent of the crystallographic orientation of the Pt electrode, the onset for rapid Cr(VI) reduction is highly affected by the nature and crystallographic orientation of the electrode.     

Addition of α‐tocopherol on poly(lactic acid): Thermal,mechanical, and sorption properties

This work investigates the effect of the addition of a well‐known antioxidant, α‐tocopherol in poly (lactic acid) flexural and barrier properties. For that purpose, films of poly(lactic acid) enriched with 0, 2.2, and 4.4% of α‐tocopherol were prepared. Differential scanning calorimetry, thermogravimetric analysis, and dynamic mechanical analysis were used to characterize the changes in the mechanical and thermal properties. The sorption of oxygen and carbon dioxide in the prepared enriched films of poly(lactic acid) was measured at different temperatures between 283 and 313 K and pressures up to atmospheric pressure using a Quartz Crystal Microbalance. Although no significant changes were found in the mechanical and thermal properties, the addition of α‐tocopherol promotes an increasing in the oxygen sorption and the convex shape of the isotherms indicate a strong interaction gas‐polymer. Regarding the sorption of carbon dioxide, no pronounced effect was found. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Cu(acac)2 Immobilized in Ionic Liquids: A Recoverable and Reusable Catalytic System for Aza‐Michael Reactions

Copper(II) acetylacetonate immobilized in ionic liquids efficiently catalyzes the aza‐Michael reaction of amines with α,β‐unsaturated carbonyl compounds to produce the corresponding β‐amino carbonyl compounds with great alacrity in excellent yields. The reactions are far more facile than those reported earlier. The recovered ionic liquid phase containing the copper catalyst can be reused for several cycles with consistent activity.     

Performance of Pd catalysts supported on nanocrystalline α-Al2O3 and Ni-modified α-Al2O3 in selective hydrogenation of acetylene

Nanocrystalline α-Al₂O₃ and Ni-modified α-Al₂O₃ have been prepared by sol–gel and solvothermal methods and employed as supports for Pd catalysts. Regardless of the preparation method used, NiAl₂O₄ spinel was formed on the Ni-modified α-Al₂O₃ after calcination at 1150 °C. However, an addition of NiO peaks was also observed by X-ray diffraction for the solvothermal-made Ni-modified α-Al₂O₃ powder. Catalytic performances of the Pd catalysts supported on these nanocrystalline α-Al₂O₃ and Ni-modified α-Al₂O₃ in selective hydrogenation of acetylene were found to be superior to those of the commercial α-Al₂O₃ supported one. Ethylene selectivities were improved in the order: Pd/Ni-modified α-Al₂O₃–sol–gel > Pd/Ni-modified α-Al₂O₃-solvothermal ≈ Pd/α-Al₂O₃–sol–gel > Pd/α-Al₂O₃-solvothermal  Pd/α-Al₂O₃-commerical. As revealed by NH₃ temperature program desorption studies, incorporation of Ni atoms in α-Al₂O₃ resulted in a significant decrease of acid sites on the alumina supports. Moreover, XPS revealed a shift of Pd 3d binding energy for Pd catalyst supported on Ni-modified α-Al₂O₃–sol–gel where only NiAl₂O₄ was formed, suggesting that the electronic properties of Pd may be modified.