Removal of Cr(VI) from aqueous solutions by low-cost biosorbents: marine macroalgae and agricultural by-products

In this study, adsorption of Cr(VI) onto the four low-cost biosorbents (Laminaria japonica, P. yezoensis Ueda, rice bran and wheat bran) was investigated depending on solution pH, contact time, adsorbent concentration and adsorption isotherms by employing batch adsorption technique. The adsorption capacities were significantly influenced by solution pH, with lower pH favoring higher Cr(VI) removal for various biosorbents. The ionic strength of NaCl was also observed to have a significant impact on the Cr(VI) adsorption due to the competition of Cl(-) in the aqueous solutions. The batch equilibrium data were correlated to Langmuir and Freundlich isotherms and the data fitted better to the Freundlich isotherm equation. The apparent thermodynamic parameters were calculated for each of the four biosorbents and the obtained numerical values showed that the Cr(VI) adsorption onto the various low-cost biosorbents is spontaneous, entropy-driven and endothermic processes. The batch kinetic data were correlated to the pseudo-first order and pseudo-second order models and the data fitted better to the pseudo-second order equation. An intraparticle diffusion model was applied to investigate the adsorption mechanisms. The adsorption capacities for various biosorbents studied in this work were inversely proportional to the adsorbent concentrations.     

Characteristics and mechanisms of hexavalent chromium removal by biochar from sugar beet tailing

Removal of Cr(VI) from aqueous solutions using biochar from sugar beet tailing (SBT) was investigated as a function of pH, contact time, and biochar mass via batch experiments. The surface characteristics of SBT biochar before and after Cr(VI) sorption was investigated with scanning electron microscopy equipped with energy dispersive X-ray spectroscopy and Fourier transform infrared spectroscopy. Desorption and X-ray photoelectron spectroscopy studies showed that most of the Cr bound to SBT biochar was Cr(III). These results indicated that the electrostatic attraction of Cr(VI) to positively charged biochar surface, reduction of Cr(VI) to Cr(III) ion, and complexation between Cr(III) ion and SBT's function groups were probably responsible for Cr(VI) removal by SBT biochar. An initial solution with a pH of 2.0 was most favorable for Cr(VI) removal. The sorption process can be described by the pseudo-second order equation and Langmuir isotherm. The maximum sorption capacity for Cr(VI) was 123 mg/g under an acidic medium, which was comparable to other low-cost sorbents.     

Removal of chromium(VI) from aqueous solution by activated carbons: kinetic and equilibrium studies

The objective of this study is to assess the uptake of hexavalent chromium (Cr(VI)) from aqueous solutions onto activated carbons (AC) produced from wood. Two activated carbons are tested, a KOH-activated carbon and a commercial H3PO4-activated carbon (Acticarbone CXV). The adsorption of Cr(VI) is maximal at the lowest values of pH (pH 3) and increases with temperature for both adsorbents. The KOH-activated carbon shows higher capacity for adsorption of Cr(VI) than Acticarbone. The sorption isotherms fit the Langmuir model accurately. The adsorption reaction was found to obey a pseudo second-order rate. The activation energy and the pre-exponential factor as well as the thermodynamic functions related to adsorption reaction, DeltaS degrees , DeltaH degrees , DeltaG degrees , were determined. Nevertheless, the global reaction rate is probably controlled by the intra-particular diffusion of Cr(VI) and the mass diffusivity of Cr(VI) was evaluated.     

Sorption of Cr(VI) ions on two Lewatit-anion exchange resins and their quantitative determination using UV-visible spectrophotometer

The sorption of Cr(VI) from aqueous solutions with macroporous resins which contain quarternary amine groups (Lewatit MP 64 and Lewatit MP 500) was studied at varying Cr(VI) concentration, adsorbent dose, pH, contact time and temperature. Batch shaking sorption experiments were carried out to evaluate the performance of Lewatit MP 64 and Lewatit MP 500 anion exchange resins in the removal of Cr(VI) from aqueous solutions. The concentration of Cr(VI) in aqueous solution was determined by UV-visible spectrophotometer. The ion exchange process, which is dependent on pH, showed maximum removal of Cr(VI) in the pH range 3-7 for an initial Cr(VI) concentration of 1x10(-3) M. The optimum pH for Cr(VI) adsorption was found as 5.0 for Lewatit MP 64 and 6.0 for Lewatit MP 500. The maximum Cr(VI) adsorption at pH 5.0 is 0.40 and 0.41 mmol/g resin for Lewatit MP 64 and Lewatit MP 500 anion exchangers, respectively. The maximum chromium sorption occurred at approximately 60 min for Lewatit MP 64 and 75 min for Lewatit MP 500. The suitability of the Freundlich and Langmuir adsorption models was also investigated for each chromium-sorbent system. The uptake of Cr(VI) by the anion exchange resins was reversible and so it has good potential for the removal of Cr(VI) from aqueous solutions. Both ion exchangers had high bonding constants but Lewatit MP 500 showed stronger binding. The rise in the temperature caused a slight decrease in the value of the equilibrium constant (K(c)) for the sorption of Cr(VI) ion.     

Batch sorption dynamics and equilibrium for the removal of cadmium ions from aqueous phase using wheat bran

Studies on a batch sorption process using wheat bran as a low cost sorbent was investigated to remove cadmium ions from aqueous solution. The influence of operational conditions such as contact time, cadmium initial concentration, sorbent mass, temperature, solution initial pH, agitation speed and ionic strength on the sorption kinetics of cadmium was studied. Pseudo-second-order model was evaluated using the six linear forms as well as the non-linear curve fitting analysis method. Modeling of kinetic results shows that sorption process is best described by the pseudo-second-order model using the non-linear method. The sorption of cadmium was found to be dependent on initial concentration, sorbent mass, solution pH, agitation speed, temperature, ionic strength and contact time. The value of activation energy (12.38 kJ mol(-1)) indicates that sorption has a low potential barrier corresponding to a physical process. Sorption equilibrium isotherms at different temperatures was determined and correlated with common isotherm equations such as Langmuir and Freundlich models. It was found that the Langmuir model appears to well fit the isotherm data but a worse correlation was obtained by the Freundlich model. The five Langmuir linear equations as well as the non-linear curve fitting analysis method were discussed. Results show that the non-linear method may be a better way to obtain the Langmuir parameters. Thermodynamic parameters such as DeltaH degrees, DeltaS degrees and DeltaG degrees were calculated. These parameters indicate that the sorption of cadmium by wheat bran is a spontaneous process and physical in nature involving weak forces of attraction and is also endothermic.     

Selective preconcentration and determination of chromium(VI) using a flat sheet polymer inclusion sorbent: potential application for Cr(VI) determination in real samples

A method for sorption preconcentration of Cr(VI) from aqueous samples was developed using a polymer inclusion sorbent (PIS). The PIS used in this method was prepared by physical inclusion of Aliquat-336 in the matrix formed by cellulose triacetate and 2-nitrophenyl octyl ether. This sorbent was found to be stable, cost-effective, efficient for preconcentration of Cr(VI) present in the aqueous samples, and amenable to direct quantitative analysis of Cr(VI) held in it by neutron activation analysis and spectrophotometry. The quantifying of Cr(VI) in PIS by spectrophotometry was carried out by developing color directly on the PIS after reacting it with 1,5-diphenylcarbazide. The distinct color developed on the PIS even at very low concentrations of Cr(VI) suggests its possible use for field determination of Cr(VI). The composition of PIS was optimized to obtain maximum uptake of Cr(VI) without sacrificing uniformity in terms of thickness and distribution of ion-exchange sites, stability, and time required for quantitative sorption of Cr(VI) from aqueous samples. The Cr(VI) species held in the PIS, mainly HCrO4- and CrO4(2-), were found to vary as a function of pH of the aqueous samples from which Cr(VI) was preconcentrated. A close agreement was found in the abundances of Cr(VI) species held in the PIS with those reported in the literature for aqueous solutions at different pH. The variation of Cr(VI) species as a function of pH was found to have a significant impact on the tolerance to anions on the uptake of Cr(VI) in the PIS. The high selectivity of PIS toward Cr(VI) from aqueous solution at pH = 2 was explained on the basis of hydration of anions. The uptake of Cr(VI) was found to be fairly constant (88 +/- 3%) up to nearly complete exchange of counterions present in the PIS. The method developed in the present work was successfully used for the preconcentration of Cr(VI) from tap water and seawater samples containing low levels of Cr(VI).     

Guava (Psidium guajava) leaf powder: novel adsorbent for removal of methylene blue from aqueous solutions

Batch sorption experiments were carried out using a novel adsorbent, guava leaf powder (GLP), for the removal of methylene blue (MB) from aqueous solutions. Potential of GLP for adsorption of MB from aqueous solution was found to be excellent. Effects of process parameters pH, adsorbent dosage, concentration, particle size and temperature were studied. Temperature-concentration interaction effect on dye uptake was studied and a quadratic model was proposed to predict dye uptake in terms of concentration, time and temperature. The model conforms closely to the experimental data. The model was used to find optimum temperature and concentration that result in maximum dye uptake. Langmuir model represent the experimental data well. Maximum dye uptake was found to be 295mg/g, indicating that GLP can be used as an excellent low-cost adsorbent. Pseudo-first-order, pseudo-second order and intraparticle diffusion models were tested. From experimental data it was found that adsorption of MB onto GLP follow pseudo second order kinetics. External diffusion and intraparticle diffusion play roles in adsorption process. Free energy of adsorption (DeltaG degrees ), enthalpy change (DeltaH degrees ) and entropy change (DeltaS degrees ) were calculated to predict the nature of adsorption. Adsorption in packed bed was also evaluated.     

Kinetic and equilibrium studies in removing lead ions from aqueous solutions by natural sepiolite

The capacity of sepiolite for the removal of lead ions from aqueous solution was investigated under different experimental conditions. The Langmuir and Freundlich equations, which are in common use for describing sorption equilibrium for wastewater-treatment applications, were applied to data. The constants and correlation coefficients of these isotherm models for the present system at different conditions such as pH, temperature and particle size were calculated and compared. The equilibrium process was well described by the Langmuir isotherm model and the maximum sorption capacity was found to be 93.4 mg/g for the optimal experimental condition. The thermodynamic parameters (DeltaG(o), DeltaH(o) and DeltaS(o)) for lead sorption on the sepiolite were also determined from the temperature dependence. The influences of specific parameters such as the agitation speed, particle size and initial concentration for the kinetic studies were also examined. The sorption kinetics were tested for first order reversible, pseudo-first order and pseudo-second order reaction and the rate constants of kinetic models were calculated. The best correlation coefficients were obtained using the pseudo-second order kinetic model, indicating that lead uptake process followed the pseudo-second order rate expression.     

Adsorption of chromium(VI) and Rhodamine B by surface modified tannery waste: kinetic, mechanistic and thermodynamic studies

In this study, various activation methods have been employed to examine the potential reuse of tannery residual biomass (TRB) obtained from vegetable tanning process for the removal of Cr(VI) and Rhodamine B (RB) from aqueous solution. The maximum BET surface area (10.42 m(2)/g), honey comb pore distribution and uptake of both Cr(VI) and RB were achieved when only 3-fold volume of HCl was used to activate the biomass. The pH and temperature experiment showed that they have considerable impact on the adsorption capacity of the used adsorbent. The presence of other ions (Na(+), Ca(2+) and NH(4)(+)) significantly reduces the metal uptake but marginal enhancement in the dye removal was observed when Na(+) and NH(4)(+) ions were present in the solution. The equilibrium data fitted satisfactorily with the Langmuir model and monolayer sorption capacity obtained as 177-217 and 213-250 mg/g for Cr(VI) and RB at 30-50°C, respectively. The sorption kinetics was found to follow the pseudo-second-order kinetic model. The increase in adsorption capacity for both metal and dye with increase in temperature indicates that the uptake was endothermic in nature. The results indicate that the HCl modified TRB (A-TRB) could be employed as a low cost adsorbent for the removal of both Cr(VI) and RB from the aqueous solution including industrial wastewater.     

Removal of chromium from aqueous solution by using oxidized multiwalled carbon nanotubes

The batch removal of hexavalent chromium (Cr(VI)) from aqueous solution by using oxidized multiwalled carbon nanotubes (MWCNTs) was studied under ambient conditions. The effect of pH, initial concentration of Cr(VI), MWCNT content, contact time and ionic strength on the removal of Cr(VI) was also investigated. The removal was favored at low pH with maximum removal at pH <2. The adsorption kinetics was modeled by first-order reversible kinetics, pseudo-first-order kinetics, pseudo-second-order kinetics, and intraparticle diffusion models, respectively. The rate constants for all these kinetic models were calculated, and the results indicate that pseudo-second-order kinetics model was well suitable to model the kinetic adsorption of Cr(VI). The removal of chromium mainly depends on the occurrence of redox reaction of adsorbed Cr(VI) on the surface of oxidized MWCNTs to the formation of Cr(III), and subsequent the sorption of Cr(III) on MWCNTs appears as the leading mechanism for chromium uptake to MWCNTs. The presence of Cr(III) and Cr(VI) on oxidized MWCNTs was confirmed by the X-ray photoelectron spectroscopic analysis. The application of Langmuir and Freundlich isotherms are applied to fit the adsorption data of Cr(VI). Equilibrium data were well described by the typical Langmuir adsorption isotherm. Overall, the study demonstrated that MWCNTs can effectively remove Cr(VI) from aqueous solution under a wide range of experimental conditions, without significant Cr(III) release.     

Biosorption of nickel from protonated rice bran

In the present study biosorption technique, the accumulation of metals by biomass was used for the removal of nickel from aqueous medium. The rice bran in its acid treated (H(3)PO(4)) form was used as a low cost sorbent. The adsorption characteristics of nickel on protonated rice bran were evaluated as a function of pH, biosorbent size, biosorbent dosage, initial concentration of nickel and time. Within the tested pH range (pH 1-7), the protonated rice bran displayed more resistance to pH variation, retaining up to 102 mg/g of the nickel binding capacity at pH 6. Meanwhile, at lower pH values the uptake capacity decreased. The % age removal of nickel was maximum at 0.25 g of biosorbent dose and 0.25 mm biosorbent size. At the optimal conditions, metal ion uptake was increased as the initial metal ion concentration increased up to 100mg/L. Kinetic and isotherm experiments were carried out at the optimal pH 6.0 for nickel. The metal removal rate was rapid, with 57% of the total adsorption taking place within 15-30 min. The Freundlich and Langmuir models were used to describe the uptake of nickel on protonated rice bran. The Langmuir and Freundlich model parameters were evaluated. The equilibrium adsorption data was better fitted to Langmuir adsorption isotherm model. The adsorption followed pseudo second-order kinetic model. The thermodynamic assessment of the metal ion-rice bran biomass system indicated the feasibility and spontaneous nature of the process and DeltaG degrees values were evaluated as ranging from -22.82 to -24.04 kJ/mol for nickel sorption. The order of magnitude of the DeltaG degrees values indicated an ion-exchange physiochemical sorption process.     

Studies on sorption properties of zeolite derived from Indian fly ash

Indian fly ash has been completely converted to crystalline porous 13X zeolite by NaOH fusion at 600 degrees C followed by hydrothermal treatment at 105 degrees C for 20 h. Obtained materials were characterized by XRD, SEM and surface area measurement. Prepared material was used for the sorption study of different metal ions (Cu(2+), Co(2+) and Ni(2+)) at different pH, temperature. Thermodynamic data (DeltaS, DeltaH and DeltaG) corresponding to different metal ion uptake were evaluated from Langmuir equation. In all the experiment sorption capacity of prepared zeolite was found to be quite high than that of fly ash at acidic pH. However, the uptake selectivity order for both the materials is Cu(2+)>Co(2+)>Ni(2+).     

Application of dolochar in the removal of cadmium and hexavalent chromium ions from aqueous solutions

Dolochar, a waste material generated in sponge iron industry, is processed and put to test as an adsorbent for removal of Cd(II) and Cr(VI) ions from aqueous solutions. The dolochar samples were characterised to determine the different phases and their distribution by reflection microscopy. The analysis indicated that the sample consists of metallic iron, fused carbon, and Ca-Mg bearing phases (Ca-Mg-silicate-oxide) along with lots of voids and pores. The fixed carbon (FC) content of the material is 13.8% with a Langmuir surface area of 81.6 m²/g and micropore area of 34.1 m²/g. Batch adsorption experiments have been conducted to study the sorption behaviour of Cd(II) and Cr(VI) ions on dolochar as a function of particle size, contact time, adsorbent dosages, pH and temperature. It is observed that higher pH and temperature enhances sorption of Cd(II) ions. In contrast, the adsorption for Cr(VI) is found to be better in acidic pH in comparison to alkaline media. The equilibrium adsorption isotherm data are tested by applying both Langmuir and Freundlich isotherm models. It is observed that Langmuir isotherm model fitted better compared to the Freundlich model indicating monolayer adsorption. The thermodynamic parameters such as ΔG°, ΔH° and ΔS° indicate the effectiveness of dolochar to remove Cd(II) and Cr(VI) ions from aqueous solution. The kinetics of adsorption is found to better fit to pseudo second order reaction.     

Removal of chromium (VI) from aqueous solution using treated oil palm fibre

This study proposed an oil palm by-product as a low-cost adsorbent for the removal of hexavalent chromium [Cr (VI)] from aqueous solution. Adsorption of Cr (VI) by sulphuric acid and heat-treated oil palm fibre was conducted using batch tests. The influence of pH, contact time, initial chromium concentration and adsorbent dosage on the removal of Cr (VI) from the solutions was investigated. The optimum initial pH for maximum uptake of Cr (VI) from aqueous solution was found to be 1.5. The removal efficiency was found to correlate with the initial Cr (VI) concentration, adsorbent dosage as well as the contact time between Cr (VI) and the adsorbent. The adsorption kinetics tested with pseudo first order and pseudo second order models yielded high R(2) values from 0.9254 to 0.9870 and from 0.9936 to 0.9998, respectively. The analysis of variance (ANOVA) showed significant difference between the R(2) values of the two models at 99% confidence level. The Freundlich isotherm (R(2)=0.8778) described Cr (VI) adsorption slightly better than the Langmuir isotherm (R(2)=0.8715). Difficulty in desorption of Cr (VI) suggests the suitability of treated oil palm fibre as a single-use adsorbent for Cr (VI) removal from aqueous solution.     

Characterization of Cr(VI) removal from aqueous solutions by a surplus agricultural waste--rice straw

The removal of Cr(VI) from aqueous solution by rice straw, a surplus agricultural byproduct was investigated. The optimal pH was 2.0 and Cr(VI) removal rate increased with decreased Cr(VI) concentration and with increased temperature. Decrease in straw particle size led to an increase in Cr(VI) removal. Equilibrium was achieved in about 48 h under standard conditions, and Cr(III), which appeared in the solution and remained stable thereafter, indicating that both reduction and adsorption played a part in the Cr(VI) removal. The increase of the solution pH suggested that protons were needed for the Cr(VI) removal. A relatively high level of NO(3)(-) notably restrained the reduction of Cr(VI) to Cr(III), while high level of SO(4)(2-) supported it. The promotion of the tartaric acid modified rice straw (TARS) and the slight inhibition of the esterified rice straw (ERS) on Cr(VI) removal indicated that carboxyl groups present on the biomass played an important role in chromium remediation even though were not fully responsible for it. Isotherm tests showed that equilibrium sorption data were better represented by Langmuir model and the sorption capacity of rice straw was found to be 3.15 mg/g.     

Treatment of wastewater containing toxic chromium using new activated carbon developed from date palm seed

The use of a new activated carbon developed from date palm seed wastes, generated in the jam industry, for removing toxic chromium from aqueous solution has been investigated. The activated carbon has been achieved from date palm seed by dehydrating methods using concentrated sulfuric acid. The batch experiments were conducted to determine the adsorption capacity of the biomass. The effect of initial metal concentration (25-125mgl(-1)), pH, contact time, and concentration of date palm seed carbon have been studied at room temperature. A strong dependence of the adsorption capacity on pH was observed, the capacity increase as pH value decrease and the optimum pH value is pH 1.0. Kinetics and adsorption equilibrium were studied at different sorbent doses. The adsorption process was fast and the equilibrium was reached within 180min. The maximum removal was 100% for 75mgl(-1) of Cr(+ concentration on 4gl(-1) carbon concentration and the maximum adsorption capacity was 120.48mgg(-1). The kinetic data were analyzed using various kinetic models - pseudo-first order equation, pseudo-second order equation, Elovich equation and intraparticle diffusion equation - and the equilibrium data were tested using several isotherm models, Langmuir, Freundlich, Koble-Corrigan, Redlich-Peterson, Tempkin, Dubinin-Radushkevich and Generalized isotherm equations. The Elovich equation and pseudo-second order equation provide the greatest accuracy for the kinetic data and Koble-Corrigan and Langmuir models the closest fit for the equilibrium data. Activation energy of sorption has also been evaluated as 0.115 and 0.229kJmol(-1).     

Removal of Ni(II), Zn(II) and Cr(VI) from aqueous solution by Alternanthera philoxeroides biomass

Alternanthera philoxeroides biomass, a type of freshwater macrophyte, was used for the sorptive removal of Ni(II), Zn(II) and Cr(VI) from aqueous solutions. Variables of the batch experiments include solution pH, contact time, particle size and temperature. The biosorption capacities are significantly affected by solution pH. Higher pH favors higher Ni(II), Zn(II) removal, whereas higher uptake of Cr(VI) is observed as the pH is decreased. A two-stage kinetic behavior is observed in the biosorption of Ni(II), Zn(II) and Cr(VI): very rapid initial biosorption in a few minutes, followed by a long period of a slower uptake. It is noted that an increase in temperature results in a higher Ni(II), Zn(II) and Cr(VI) loading per unit weight of the sorbent. Decreasing the particle sizes of the Alternanthera philoxeroides biomass leads to an increase in the Ni(II), Zn(II) and Cr(VI) uptake per unit weight of the sorbent. All isothermal data are fairly well fitted with Langmuir equations. The thermodynamic parameter, DeltaG degrees, were calculated. The negative DeltaG degrees values of Cr(VI), Ni(II) and Zn(II) at various temperatures confirm the adsorption processes are spontaneous.     

Removal of Cr(VI) from industrial wastewaters by adsorption Part I: determination of optimum conditions

Aim of this study is the determination of the Cr(VI) removal efficiency of treated pine sawdust and also to find out the thermodynamic and kinetic parameters of Cr(VI) removal process in batch systems. Sawdust has been treated with 1,5-disodium hydrogen phosphate before the adsorption experiments. The effects of initial concentration of Cr(VI) ion, temperature, amount of adsorbent and pH of the solution on adsorption have been investigated. Optimum conditions for adsorption were determined as T=40 degrees C, sawdust dose=4 g, pH 2, by using the results of these experiments and an additional set of experiments was performed under these optimum conditions in order to see the change in the adsorption efficiency. Removal of chromium ion was found as highly dependent on pH and initial Cr(VI) concentration of the solution. In order to find out thermodynamic and kinetic parameters equilibrium adsorption models were applied. Although experimental data confirm with both Langmuir and Freundlich isotherm models, they suit most on Langmuir isotherms. Adsorption rate constant was determined from Lagergren equation. Equilibrium constants, adsorption free energy, enthalpy and entropy change values were also determined. It was found that adsorption process follows first order kinetic and adsorption of Cr(VI) on sawdust has the spontaneous nature.     

Synthesis of ordered large-pore mesoporous carbon for Cr(VI) adsorption

Highly ordered mesoporous carbon with large accessible pores (OMC-P) was prepared by using laboratory-made poly(ethylene oxide)-b-polystyrene diblock copolymer as template via the evaporation-induced self-assembly method. The OMC-P was first used as adsorbent for removal of Cr(VI) ion from aqueous solution. Adsorption behavior was studied as a function of time, concentration of adsorbate, temperature, and pH. The kinetics of adsorption of Cr(VI) ion onto OMC-P is well fit to the pseudo-second order model. The Cr(VI) ion adsorption is favored at lower temperatures and at initial acid pH values in the equilibrium. The Freundlich and the Langmuir isotherm fit the equilibrium data satisfactorily. The influence of porosity on equilibrium adsorption capacity was investigated on three types of carbon materials, namely, OMC-P, ordered mesoporous carbon templated from amphiphilic triblock copolymer F127 (OMC-F) and commercial activated carbon (AC). The prepared OMC-P exhibits much higher adsorption performance than the other two carbons.     

Error analysis of equilibrium studies for the almond shell activated carbon adsorption of Cr(VI) from aqueous solutions

In this study, the preparation of activated carbon from almond shell with H2SO4 activation and its ability to remove toxic hexavalent chromium from aqueous solutions are reported. The influences of several operating parameters such as pH, particle size and temperature on the adsorption capacity were investigated. Adsorption of Cr(VI) is found to be highly pH, particle size and temperature dependent. Four adsorption isotherm models namely, Langmuir, Freundlich, Tempkin and Dubinin-Radushkevich were used to analyze the equilibrium data. The Langmuir isotherm provided the best correlation for Cr(VI) onto the almond shell activated carbon (ASC). Adsorption capacity was calculated from the Langmuir isotherm as 190.3 mg/g at 323 K. Thermodynamic parameters were evaluated and the adsorption was endothermic showing monolayer adsorption of Cr(VI). Five error functions were used to treat the equilibrium data using non-linear optimization techniques for evaluating the fit of the isotherm equations. The highest correlation for the isotherm equations in this system was obtained for the Freundlich isotherm. ASC is found to be inexpensive and effective adsorbent for removal of Cr(VI) from aqueous solutions.