Nakagami衰落信道上组合SC/MRC的性能分析

研究Nakagami衰落信道上组合发射机选择合并(SC)/接收机最大比合并(MRC)天线分集系统的性能.使用矩生成函数方法,推导采用组合SC/MRC天线分集和相干检测的MPSK(M进制相移键控)、MQAM(M进制正交幅度调制)、MPAM(M进制脉冲幅度调制)、BFSK(二进制频移键控)、最小相关BFSK(BFSKmin)、差分编码BPSK(DE-BPSK)和预编码MSK(最小频移键控)等几种M进制数字调制方式在Nakagami衰落信道上的误符号率性能,获得了M进制数字调制系统误符号率性能的精确数学表达式.数值计算结果阐明了发射天线和接收天线数目以及衰落参数对数字调制系统误符号率性能的影响.     

卫星移动通信信道特性与模型研究

从多径效应、阴影效应、多普勒效应和电离层闪烁等方面具体分析了卫星移动通信信道传输特性,并从单状态统计模型和多状态统计模型两方面详细介绍了瑞利信道模型、莱斯信道模型、对数正态衰落信道模型、Loo模型、Corazza模型、Lutz两状态信道模型和五状态M arkov信道模型,最后对未来卫星移动通信信道模型研究做了展望。     

Nakagami衰落信道的仿真方法研究

Nakagami衰落能够描述实际中所遇到的大多数衰落环境。文章提出了一个新的Nakagami衰落信道的仿真方法,用它仿真了Nakagami衰落信道的一阶、二阶统计特性并通过与其理论值进行比较验证了该方法的可靠性。该仿真方法直接基于瑞利衰落信道仿真基础之上,是对Nakagami衰落信道的一种新的研究探讨。     

一种无线信道复合衰落模型的分析与仿真

移动通信过程中由于移动设备所处的环境不同,存在不同的信道衰落,从各种衰落模型的相互关系出发,提出了一种移动无线衰落信道混合应用模型。通过实现瑞利衰落分布和对数正态分布,经线性和非线性变换可以得到Nakagami和Suzuki等分布。对提出的复合衰落模型进行仿真,仿真结果符合理论值。该混合衰落模型设计和仿真方法可以用于指导信道模拟器设计和通信系统仿真。     

一种无线通信信道的设计与算法仿真

无线信道在实际中难以测试,但信道仿真可以解决这一问题。文中给出了一种灵活且适应性强的无线移动信道模型,并给出了该模型中的衰落信道模型及算法,运用该算法对衰落信道进行仿真,给出衰落信号的仿真结果以及输入信号经衰落信道处理后的结果。     

基于最小二乘支持向量机的Jakes衰落信道预测

将LS-SVM用于Jakes衰落信道预测,进而提出了一种新的衰落信道预测算法.该算法利用衰落信道系数的既有观测值构建学习样本,然后借助LS-SVM的学习与判决能力实施非线性预测.对Jakes衰落信道的预测实验表明,文中预测算法可行且有效.另外,在实验中也讨论了嵌入维参数对预测准确度的影响,并给出最优嵌入维的选取方法.     

相关衰落信道上MIMO系统中组合SC/MRC的性能分析

研究相关瑞利衰落信道上MIMO系统中组合发射机选择合并(SC)/接收机最大比合并(MRC)的天线分集系统性能.使用矩生成函数方法,推导相关瑞利衰落信道上采用组合SC/MRC天线分集争相干检测的M进制相移键控(MPSK),M进制正交幅度调制(MQAM),M进制脉冲幅度调制(MPAM)等几种M进制数字调制方式的误符号率精确表达式.数值计算结果阐明相关性和天线阵结构对采用组合SC/MRC天线分集的几种M进制数字调制方式的平均误符号率性能的影响.     

基于Kronecker法的MIMO信道模拟及硬件实现

针对多输入多输出（Multiple-Input Multiple-Output,MIMO）无线通信系统,在基于Kronecker 的MIMO信道模型中综合考虑了路径损耗、阴影衰落和多径衰落等因素,实现了基于现场可编程门阵列（Field Programmable Gate Array,FPGA）的MIMO信道模拟器,并分析了硬件设计方案以及MIMO信道模拟的实现方法。实测结果表明,设计的MIMO信道模拟器可以模拟瑞利衰落、莱斯衰落以及阴影衰落等常见的信道衰落类型,能够应用于3GPP、COST-207等标准信道模型的复现。该模拟器可作为无线通信系统研究的测试设备,辅助通信系统研究的算法验证、方案优化以及性能分析。     

Turbo码联合信道估计在瑞利衰落信道中的运用

如果将信道衰落信息提供给Turbo译码器,则在瑞利衰落信道下更能发挥Turbo码的优良特性。该文分析了在瑞利衰落信道下Turbo译码算法,用Jake方法模拟瑞利衰落信道,采用将多时隙加权平均(WMSA)信道估计和Turbo码结合起来的算法。仿真结果显示此系统性能优异。     

复合衰落信道建模及模拟方法研究

针对传统信道模拟器仅考虑多径衰落的问题,建立了包含路径损耗、阴影衰落和多径衰落的复合衰落信道模型,提出了一种基于高斯变量分解和谐波叠加原理的硬件模拟方法,推导了该方法输出衰落幅值理论分布与仿真参数的内在联系,并详细分析了可编程逻辑器件定点化模型输出周期性及位宽选择等问题。针对原型化模拟器的实测结果表明,该模拟方法输出信道衰落的统计特性与理论值吻合,可用于实验室中无线通信系统的性能测试和验证。      

Theoretical analysis of the relationship between the Brillouin gain coefficient and the strain in the optical-fiber sensors

The relation between the power of the Brillouin signal and the strain is one of the bases of the distributed fiber sensors of temperature and strain. The coefficient of the Bfillouin gain can be changed by the temperature and the strain that will affect the power of the Brillouin scattering. The relation between the change of the Brillouin gain coefficient and the strain is thought to be linear by many researchers. However, it is not always linear based on the theoretical analysis and numerical simulation. Therefore, errors will be caused if the relation between the change of the Brillouin gain coefficient and the strain is regarded as to be linear approximately for measuring the temperature and the strain. For this reason, the influence of the parameters on the Brillouin gain coefficient is proposed through theoretical analysis and numerical simulation.     

电磁兼容检测实验室测试系统相符性比对研究

电磁兼容测试结果与检测实验室可靠性程度直接相关,检测实验室自身质量是保证电磁兼容测试结果准确性先决条件,检测实验室测试系统相符性则成为电磁兼容系统性能评估中需要考虑的关键内容和重要指标。因此,检测实验室测试系统相符性比对是实现电磁兼容系统评估研究的基础工作之一。本文首先针对电磁兼容检测实验室测试系统相符性比对的特点,结合自己几年来的测试实践论述了电磁兼容检测实验室测试系统相符性对比方案,然后提出了具体的案例同时进行了详细的分析,最后总结出了影响电磁兼容检测实验室测试系统相符性因素,整个案例和分析过程及结果可作为电磁兼容检测实验室测试系统相符性比对的手段和依据,具有重要的现实指导意义。     

Resolution Enhancement Technology:Integrated Process Solutions using OPC

DUV lithography, using the 248 nm wavelength, is a viable manufacturing option for devices with features at 130 nm and less. Given the low kl value of the lithography, integrated process development is a necessary method for achieving acceptable process latitude. The application of assist features for rule based OPC requires the simultaneous optimization of the mask, illumination optics and the resist.Described in this paper are the details involved in optimizing each of these aspects for line and space imaging.A reference pitch is first chosen to determine how the optics will be set. The ideal sigma setting is determined by a simple geometrically derived expression. The inner and outer machine settings are determined, in turn,with the simulation of a figure of merit. The maximum value of the response surface of this FOM occurs at the optimal sigma settings. Experimental confirmation of this is shown in the paper.Assist features are used to modify the aerial image of the more isolated images on the mask. The effect that the diffraction of the scattering bars (SBs) has on the image intensity distribution is explained. Rules for determining the size and placement of SBs are also given.Resist is optimized for use with off-axis illumination and assist features. A general explanation of the material' s effect is discussed along with the affect on the through-pitch bias. The paper culminates with the showing of the lithographic results from the fully optimized system.     

圆球微腔对水蒸汽的敏感特性仿真实验研究

研究了圆球微腔在水蒸汽传感中应用的可行性。通过测试在有/无水蒸汽的气室环境下,圆球微腔透射光谱的变化来对气室水蒸汽浓度情况进行传感测试。仿真实验结果显示:在有无水蒸汽干扰的条件下系统输出光强有明显的变化,即研制基于圆球微腔的传感器是可行的。     

量化秩非参数CFAR检测器在杂波边缘中的性能分析

人们常用均匀背景、多目标和杂波边缘3种典型背景来衡量雷达目标检测器的性能,但在现有文献中缺乏量化秩（Rank Quantization,RQ）非参数检测器在杂波边缘中虚警概率的理论模型,缺乏RQ非参数检测器与经典的参量型检测器在杂波边缘中虚警控制能力的比较.本文给出了RQ检测器在杂波边缘中虚警概率的解析表达式,并比较了它与非相干积累CA （Cell Averaging）,GO （Greatest Of）,OS （Ordered Statistic）恒虚警方法在杂波边缘中的虚警控制能力.可以看出,采用高秩量化门限的RQ检测器的虚警控制能力要优于低秩量化门限的情况,在瑞利分布杂波边缘情况下,RQ检测器的虚警控制能力与非相干积累OS方法接近.但是当强杂波变为长拖尾分布的非高斯杂波时,非相干积累CA,GO和OS参量型检测方法的虚警概率产生了3个数量级以上的上升,且不能降回到原始设定的虚警概率.而RQ检测器显示出了非参量检测器的优势,即当杂波背景的分布类型发生变化后,它仍然可以保持虚警概率的恒定.     

一种改善LED背光亮度均匀性的新型反射膜研究

在LCD的LED背光腔体的底面设计了新型曲面形状及性能的反光膜,将扩散膜反射回灯腔底部的光重新反射回出光口以改善亮度均匀性能;在侧面设计了镜面反射膜,将位于LED矩阵边缘区域由LED射向灯腔侧壁的光反射重新射向出光口,增加了LED背光边缘区域的亮度,从而改善了背光边缘区域较暗的亮度不均匀状况.根据此类反射膜的设计完成了反射膜的制备,并应用于38 cm LED背光源样品.测试结果显示,设置反射膜的LED背光的亮度均匀性值为10.2%,明显优于未设置反射膜的值16.8%,亮度提高了29%左右,表明该种新型反射膜可以提高亮度并改善亮度均匀性.     

An improved parallel thinning algorithm with two subiterations

The parallel thinning algorithm with two subiterations is improved in this paper. By analyzing the notions of connected components and passes, a conclusion is drawn that the number of passes and the number of eight-connected components are equal. Then the expression of the number of eight-connected components is obtained which replaces the old one in the algorithm. And a reserving condition is proposed by experiments, which alleviates the excess deletion where a diagonal line and a beeline intersect. The experimental results demonstrate that the thinned curve is almost located in the middle of the original curve connectivelv with single pixel width and the processing speed is high.     

Study of waveguide coupling efficiency in hybrid silicon lasers

This paper presents a new method to increase the waveguide coupling efficiency in hybrid silicon lasers. We find that the propagation constant of the InGaAsP emitting layer can be equal to that of the Si resonant layer through improving the design size of the InP waveguide. The coupling power achieves 42% of the total power in the hybrid lasers when the thickness of the bonding layer is 100 nm. Our result is very close to 50% of the total power reported by Intel when the thickness of the thin bonding layer is less than 5 nm. Therefore, our invariable coupling power technique is simpler than Intel＇s.     

5-DOF混联雕刻机速度运动学分析及仿真

五自由度混联机器人因为兼有串联机器人和并联机器人的优点而成为重要的研究方向。在对五自由度并串联雕刻机控制的过程中,求解其输入与末端位置之间的速度及加速度的传递是研究的重点和难点。文中先通过机构拓扑理论对雕刻机的自由度进行分析,再运用矢量法对雕刻机末端运动学进行正向分析,然后采用求导法对雕刻机滑块运动学进行逆向分析,最终通过MATLAB和ADAMS仿真分析验证了雕刻机速度运动学分析的合理性以及算法的有效性。该结果为五自由度混联机器人的实际控制编程提供了参考。     

Design and nonlinearity compensation of Fabry-Perot type tunable optical filters for dynamic strain sensing systems

The collected spectrum of the fiber Bragg grating （FBG） and the loss of the detected optical power are discussed with respect to the 3-dB bandwidth of a Fabry-Perot （F-P） type tunable optical filter （TOF）, respectively. And the optimized parameters of the TOF are obtained consequently. It is demonstrated that the relationship between the transmission wave- length of the TOF and its drive voltage is nonlinear. A new method to compensate the nonlinearity of the TOF is proposed. The linear sweeping of the transmission wavelength of the TOF is achieved through modifying the drive voltage using interpolation algorithm. It is observed that the average error and the maximum error of the transmission wavelength are reduced sharply under linear fit. The dynamic strain sensing is realized by use of a reference FBG and moving averaging algorithm in this system.