共查询到20条相似文献,搜索用时 167 毫秒
1.
对于薄壁件注塑摸具,其冷却系统是防止塑件变形、提高生产率的重要部分。由于光盘结构的特殊性和高精密度的要求,使得其注塑模具的冷却系统更加复杂,也更加具有至关重要的作用。本文详细研究了光盘注塑模具的冷却系统,并介绍了它的设计方法,包括动镜面、定镜面、浇口Sprue与冲子Punch部分冷却水路的设计等。 相似文献
2.
3.
4.
5.
以冰箱风道板塑件为例,介绍了该塑件注塑模具的设计过程。重点探讨了注塑模具结构、浇注系统、斜顶抽芯机构、冷却系统及热流道系统的设计及其要点。实际应用结果表明:该模具结构合理,塑件瑕疵较小,对大型塑件的注塑模具设计有一定的借鉴作用。 相似文献
6.
以数码播放器机壳背板为基础,设计了注塑模具整体结构,分析了播放器背板的结构和功能特点,合理选择塑件材料并设计注塑模具各系统结构参数,重点介绍了浇注系统、冷却系统的设计计算过程。设计的播放器背板注塑模具结构紧凑、工作稳定,成型塑件易制造,精度保持性好,对同类塑料件注塑模具设计具有一定的参考价值。 相似文献
7.
本文探讨了塑料注塑模具实用冷却系统的计算机辅助设计。借助于该软件可设计不同模具的冷却系统。 相似文献
8.
9.
10.
分析注塑模具的温度调节系统设计与冷却效率。分析注塑模具冷却系统加工与设计的要点,注塑模具设计制造温度调节系统与产品注塑效率和产品质量的相互关系。 相似文献
11.
乙烯酮(双乙烯酮)是十分重要的化工中间体,其下游产品较多。江苏某化工厂开发生产乙烯酮(双乙烯酮)下游产品三十多个,年生产规模三万多吨,是国内以乙烯酮(双乙烯酮)为中间体生产精细化学品的综合骨干企业。针对乙烯酮(双乙烯酮)下游产品废水特点,该厂结合企业实际,开展了产品优化,结构调整,清洁生产,资源循环利用,节水降耗等工作,从源头削减了污染物的生产。同时投资二千多万元新建预处理装置三套,6000m3/d废水生化处理装置一套,使全厂乙烯酮(双乙烯酮)下游产品的废水得到了有效的治理。 相似文献
12.
13.
14.
利用组件技术开发化工原理实验课件,给出了系统层、组件库层和应用层的架构划分。重点讨论了组件库的设计,给出了流体阻力这一典型实验的实现描述。实践证实,基于组件技术可以提高仿真实验的开发效率。 相似文献
15.
我厂3号回转窑(Φ4m×60m)生产线在1996年年底由SP窑(产量912t/d)改为NSP窑(产量1320t/d),预分解系统为四级旋风预热器带离线式分解炉 相似文献
17.
The miscibility of various amorphous polybutadienes with mixed microstructures of 1,4 addition units (cis, 1,4 and trans 1,4) and 1,2 addition units have been investigated. The studies here involved optical transparency, differential scanning calorimetry, and small angle light scattering. It was found that a 90 percent (cis) 1, 4 addition polybutadiene was immiscible with high (91 percent) 1,2 addition polybutadiene. Reduction of the 1,2 content to 71 percent induced an upper critical solution temperature (UCST) with the cis 1,4 polymer. Polybutadienes with 50 percent and 10 percent 1,2 contents were miscible above the crystalline melting temperature of the cis 1,4 polybutadiene. Immiscibility of the 91 percent 1,2 addition polymer was also found with a 10 percent 1,2 polybutadiene. The latter polymer also exhibits an UCST with the 71 percent 1,2 polymer. The results are used to interpret the characteristics of blends of polybutadienes of varying microstructure. 相似文献
18.
以F类粉煤灰为例,详细介绍了测定粉煤灰中烧失量的步骤、计算数学模型、影响测量不确定度的因素以及各项测量不确定度分量评定,人员、设备、材料、方法、环境都是影响测量不确定的因素。 相似文献
19.
20.
Conclusions It is significant that the purification on a single passage of viscose through porous ceramic corresponds to the result of a two-stage filtration of it in industrial filter-presses with standard fillings.Kiev Combine. Kiev Technological Institute of Light Industry. Translated from Khimicheskie Volokna, No. 3, pp. 20–22, May–June, 1969. 相似文献