共查询到19条相似文献,搜索用时 203 毫秒
1.
汽车外覆盖件在冲压生产过程中经常出现的表面缺陷有:表面星目、局部变薄、拉裂、表面凹坑和局部起皱等。介绍了汽车外覆盖件在冲压生产过程中因压力参数调整不当、原材料及模具异常等造成表面缺陷的原因,论述了通过调整具体的压力参数及改变生产条件等预防汽车外覆盖件产生冲压表面缺陷的措施。 相似文献
2.
针对汽车外覆盖件冲压回弹缺陷,设计并制造4种不同的试验模具,在试验模具中包含了在汽车外覆盖件容易产生回弹的典型的反拉延特征。通过冲压试验,观察到表面回弹缺陷的产生,并搜集产生表面回弹缺陷处的最大和最小应力应变曲线图,及在回弹区域的位移偏移量云图。同时,以自主开发的商品化冲压成形CAE软件KMAS/UFT模块为平台,针对冲压过程中回弹缺陷进行精确预示,模拟计算结果与冲压试验结果基本一致。依据广义成形理论,提出针对回弹控制方案实施建议,对进一步修正冲压模具奠定基础。 相似文献
3.
4.
大型覆盖件冲压表面缺陷的产生原因及预防措施 总被引:1,自引:1,他引:0
针对汽车大型覆盖件在冲压生产过程中出现的各种表面缺陷问题,分析了大型覆盖件在冲压生产过程中表面缺陷的产生原因,论述了大型覆盖件在冲压生产中预防表面缺陷的措施。 相似文献
5.
6.
浅谈汽车覆盖件的表面滑移线 总被引:2,自引:0,他引:2
滑移线是汽车覆盖件冲压生产中经常出现的一种表面缺陷,它严重影响了覆盖件的表面质量和车身的外观。对滑移线的产生机理、分类及其解决方法进行了全面的研究,为汽车覆盖件冲压生产时出现滑移线和维修提供了参考。 相似文献
7.
8.
汽车外覆盖件的表面质量直接影响整车的外观,是冲压成形领域关注的重点之一.针对SVW斯柯达品牌某车型侧围外板在冲压成形过程中出现的开裂、起皱、圆弧轮廓不平顺等一系列表面缺陷,从工艺设计和模具结构的角度分析了缺陷产生的原因.结合CAE模拟和现场调试,在满足试模压机和生产线压机不同工况的条件下,通过优化产品表面藏料工艺凸包,... 相似文献
9.
10.
模具硬度对高强度钢板拉毛缺陷的影响规律研究 总被引:1,自引:0,他引:1
高强度钢板的使用减轻了车身重量,但也引起了大面积的车身覆盖件拉毛缺陷。为提高汽车覆盖件的表面质量,文章在冲压现场调研及模拟实验的基础上,重点讨论拉深模具表面硬度对车身覆盖件表面拉毛缺陷的影响。研究表明,在覆盖件冲压中,板料拉毛缺陷主要起源于凹模圆角及拉深筋附近处,出现在冲压件的外壁;随着冲压次数的增加,零件拉毛越来越严重,拉毛增长速度越来越快。凹模圆角是磨损最严重的区域,模具法兰的表面粗糙度在冲压成形中变化不大;模具表面硬度越高,零件表面越不易产生拉毛缺陷。 相似文献
11.
目前商业冲压CAE分析软件对冲压开裂和起皱的预测精度达到90%以上,但是对回弹的预测精度仍然较低。在分析仿真软件不同设置条件对回弹精度的影响基础上,建立了适合覆盖件冲压回弹与面畸变CAE分析的设置规范。针对外覆盖件的回弹控制问题,提出了一种基于工程知识库与CAE分析相结合的回弹与面畸变控制方法。这种方法根据回弹仿真结果和经验数据库对外覆盖件冲压模面数据进行回弹补偿,补偿数据在满足仿真验证的基础上,面质量必须在Radius、Reflection和Section Analysis三个方面同原始数据一致。实践表明,此控制方法可以很好地预测和解决外覆盖件的回弹和面畸变问题。 相似文献
12.
13.
14.
15.
Hiroki Fujimoto Hideki Ueda Eisuke Nakayama Rintaro Ueji Hidetoshi Fujii 《Welding International》2018,32(4):264-273
Hot stamping spot welding tailored blank (TB) technology is a process to produce spot welded automotive body parts by the following process: Spot welding steel sheets in lap configuration → Hot stamping (Heating to about 900°C → Quenching and forming in water-cooled die → Shot blasting to remove scale). This process has the advantage of producing high strength lap welded automotive body parts without increasing the number of forming dies. In this study, the tensile shear fatigue strength of the spot welding TB joints (Spot welding → Hot stamping) and conventional spot welded joints (Hot stamping → Spot welding) of the 1500MPa class uncoated boron steel sheets are compared. The obtained results are as follows. The fatigue life of the spot welding TB joints was more than two times longer than that of the conventional spot welded joints. The long fatigue life of the spot welding TB joints was not caused by the heating and quenching process but by the shot blasting process after heat treatment. Shot blasting on the outer sheet surface caused the high compressive residual stress on the outer surface and did not affect the residual stress on the lapped surface. Shot blasting on the outer sheet surface increased the initiation life of fatigue crack which occurred on the lapped surface and also reduced the crack propagation speed which propagates from the lapped surface to the outer surface. FE-analysis suggested that compressive residual stress on the outer surface reduce the opening of sheet separation of joints in fatigue tests and reduce the maximum principal stress around the edge of corona bond. 相似文献
16.
17.
18.
19.
汽车侧围外板零件是车身重要的冲压件之一,成形过程较复杂,拉深过程中易产生起皱、开裂等缺陷。针对汽车侧围外板A柱拐角部位的起皱、开裂问题,通过分析零件现场冲压工艺、A柱拐角部位变形特征和材料发生起皱的原因,建立有限元仿真模型,使用AUTOFORM模拟软件对原冲压工艺方案进行全程仿真,分析结果表明,在第3工序侧整形时拐角处的流水槽面发生严重起皱缺陷。系统研究了二次拉深工序中增加吸料筋和调整压边力对起皱、开裂的影响规律,并提出在侧围外板A柱拐角处增加吸料筋和调整压边力的整改方案。经现场生产验证了分析结果的准确性和修模方案的有效性。 相似文献