共查询到20条相似文献,搜索用时 162 毫秒
1.
李鉴 《信息安全与通信保密》2007,(6):43-45
文章研究了基于ATM的MPLS交换设备的总体结构,重点研究和分析了具体实现MPLS交换的两种结构,为MPLS交换设备的具体研制提供了交换结构的参考. 相似文献
2.
宽带交换技术的演变与进展 总被引:6,自引:0,他引:6
本文简要分析了复用与交换技术的演变以及未来的光交换,分析了交换设备的构成及相关的网络控制与管理技术。阐述了作为IP与ATM融合的新一代网络交换技术-多协议标记交换(MPLS),及其在光网络中的应用。进而分析了基于软交换技术的下一代网络结构,指出了业务、控制与交换将分离的趋势。最后指出,新型交换技术-MPLS和软交换将在网络演进过程中扮演极其重要的角色。 相似文献
3.
MPLS/ATM交换机的设计与实现 总被引:1,自引:0,他引:1
多协议标记交换(MPLS)是目前Internet网上最看好的技术,同时基于异步传输模式技术(ATM)的数据交换具有快速交换、支持业务质量(QOS)等优点。本文对采用分布式转发和集中式处理相结合的方法实现MPLS/ATM交换机进行了探讨。 相似文献
4.
研究了基于ATM的MPLS,重点研究和分析了具体实现MPLS流量工程的ATM流控措施、使用约束路由的标记分发协议、路由协议,为MPLS流量工程的具体实施提供了参考。同时研究了MPLS多协议标记交换技术融合IP路由技术、ATM的QoS(Quality of Service)及交换技术,使得流量工程模式可以部署在基于IP的网络,其中包括ATM网上承载IP业务的模式。 相似文献
5.
LSP的保护与恢复技术 总被引:1,自引:0,他引:1
标记交换路径(LSP)的保护与恢复是MPLS流量工程(TE)技术的一项重要应用,文中描述了LSP保护与恢复的工作原理,以及它在ATM交换机中的实现方法。 相似文献
6.
MPLS负载均衡实现技术 总被引:3,自引:0,他引:3
田波 《信息安全与通信保密》2007,(5):155-157
负载均衡是MPLS流量工程的一项重要应用,论文基于对负载均衡工作原理的分析,提出了一种在ATM交换机中的实现方法。 相似文献
7.
8.
ATM业务量管理及其对ATM交换机设计的影响 总被引:1,自引:1,他引:0
ATM网络允诺为各种通信业务在同一个通信网络中提供满足各自服务质量的要求的服务。为此,ATM网络体系应能提供业务量管理(utaffic management)功能以支持网络业务千差万别的服务质量要求。本文首先阐述了ATM论坛(ATM Form)中所定义的ATM业务种类,它们各自的服务质量要求,以及为保证服务质量所应采用的管理策略。ATM交换机是网络中的关键部件,其不同的设计思想对网络中不同业务服务 相似文献
9.
下一代网络路由交换关键技术研究 总被引:1,自引:1,他引:0
下一代网络是近来业界积极讨论的一项崭新网络技术,简要分析了下一代网络的特征,进而说明了下一代网络对路由交换技术的基本需求。着重针对几项路由交换关键技术进行了分析、论证和阐述,包括技术体制、宽带路由交换平台、大容量交换,高速数据转发、路由协议、MPLS协议以及业务服务质量保证等,并且概要设计了下一代宽带路由交换平台的整体框架,提出了一种高速数据转发技术的基本流程。 相似文献
10.
雷达组网通信中的ATM交换机 总被引:1,自引:0,他引:1
介绍了ATM交换技术在雷达组网通信中的应用。通过对基于中央处理站的雷达组网通信技术需求的分析,提出了一种类似于用户—服务器模式的ATM交换结构。ATM技术是B—ISDN的基础,ATM交换技术是ATM技术的核心,它不仅可用于民用通信业务,而且对于电子干扰环境下雷达网对密集多目标跟踪时所涉及的通信业务也很有效。文章对ATM交换机在雷达网中的数据交换作了分析,并以计算机仿真手段评估了三种特定通信环境下输出缓冲型ATM交换机的利用率和输出队列概率分布情况。 相似文献
11.
12.
1IntroductionTheAsynchronousTransferMode(ATM)isconsideredapromisingtechniquetotransferandswitchvariouskindsofmedia,suchastele... 相似文献
13.
ATM交换机SNMP Agent的研究与实现 总被引:1,自引:0,他引:1
在ATM交换机开发过程中,SNMP Agent的开发起着核心作用,它是连接硬件平台、单板、软件系统、信令的桥梁。结合ATM交换机项目,使用目前国际上先进的开发工具,本文系统介绍了ATM交换机SNMP Agent开发的各个环节、开发步骤和具体的实现方法,对于路由器等网关设备的网管系统开发同样具有参考意义。 相似文献
14.
In this paper, we consider a capacity allocation problem arising in the context of deploying asynchronous transfer mode (ATM) networks. Given types of ATM switches, the problem is to find an optimal allocation of capacity such that the total cost of installed switch modules is minimized, while satisfying all traffic demands. We formulate the problem as an integer programming model, which can be conceptualized as a generalized bin packing problem with capacity constraints. We then develop a surrogate constraint technique of the formulation for enhancing the representation of the model. Guided by the tight lower bound of the surrogate relaxation, we devise an effective tabu search heuristic that provides good quality solutions with guaranteed optimality. We present promising computational results that show the viability of the proposed heuristic and lower bounding methods, and that provide insights into implementation for configuring ATM switch in practice. 相似文献
15.
多协议标记交换(MPLS)综述 总被引:1,自引:0,他引:1
在各种 IP和 ATM结合的方法中 ,多协议标记交换 (MPL S)是目前最有发展前途的。通过讨论标记的分配、分布和封装 ,以及标记站和数据流融合等问题 ,详细说明了 MPL S的基本模型及其工作原理 ,并在此基础上对使用 ATM技术后的多协议标记交换与传统 Internet进行了比较 相似文献
16.
17.
介绍用于10^10Mbit网络的一种光电异步变换模式形状器件。这种光电异步变换模式开关使用垂直于表面传输的电光器件,通过采用光学缓冲存贮和光学自排程电路的新颖两维光功能器件能够实现很大容量的网络。 相似文献
18.
Mike Tien-Chien Lee Yu-Chin Hsu Ben Chen Masahiro Fujita 《Design Automation for Embedded Systems》1997,2(3-4):319-338
ATM switch, the core technology of an ATM networking system, is one of the major products in Fujitsu telecommunication business. However, current gate–level design methodology can no longer satisfy its stringent time–to–market requirement. It becomes necessary to exploit high–level methodology to specify and synthesize the design at an abstraction level higher than logic gates. This paper presents our prototyping experience on domain–specific high–level modeling and synthesis for Fujitsu ATM switch design. We propose a high–level design methodology using VHDL, where ATM switch architectural features are considered during behavior modeling, and a high–level synthesis compiler, MEBS, is prototyped to synthesize the behavior model down to a gate–level implementation. Since the specific ATM switch architecture is incorporated into both modeling and synthesis phases, a high–quality design is efficiently derived. The synthesis results shows that given the design constraints, the proposed high–level design methodology can produce a gate–level implementation by MEBS with about 15 percent area reduction in shorter design cycle when compared with manual design. 相似文献
19.