An Interesting Complex: [Cd(l -trp) (d-trp)] n

A novel coordination polymer [Cd(l-trp) (d-trp)] _n (where l-trp and d-trp are l-tryptophan and d-tryptophan or (S)-2-amino-3-(3-indolyl)propionic acid and (R)-2-amino-3-(3-indolyl)propionic acid) was prepared by a solvent-thermal method and characterized by elemental analysis, IR spectra and single-crystal X-ray diffraction. The compound(monoclinic space group P2(1)/c with a = 19.759(2) Å, b = 5.2496(10) Å, c = 9.7594(16) Å, β = 97.2760(10)°, Z = 2) shows a two-dimensional plane structure. The crystallized coordination polymer has a centrosymmetric space group. Each Cd²⁺ ion coordinates with a pair of racemes, and the complex is a mesomer. Although l-trp was used, both l-trp and d-trp appear in the complex.     

Synthesis of ε-caprolactone-b-l-lactide block copolymers by mean sequential polymerization,using diphenylzinc as initiator

Block copolymers of ε-caprolactone (CL) and l-lactide (l-LA) were synthesized by sequential polymerization using diphenylzinc as initiator. The composition of the copolymers was adjusted changing the comonomers in ratio. Copolymers were characterized by ¹H-NMR, ¹³C-NMR, DSC, and GPC. Results indicate that poly(ε-caprolactone)-b-poly(l-lactide) (PCL-b-PLA) block copolymers had a narrow molecular weight distribution and well-controlled sequences without random placement.     

Non-isothermal cold crystallization behavior and kinetics of poly(l-lactide): effect of l-lactide dimer

The effects of l-lactide dimer as additives on the crystallization behavior of poly(l-lactide) (PLLA) films were studied. Hence, neat PLLA films and PLLA containing l-lactide (5 % w/w) (PLLA/La) were prepared in dichloromethane at room temperature via solution casting. The non-isothermal cold crystallization of PLLA films were studied using differential scanning calorimetry at various heating rates including 2.5, 5, 7.5, 10 and 15 °C/min. However, the X _C% was increased for PLLA/La films in comparison with neat PLLA films. The crystallization kinetics was then analyzed by the Avrami, Jeziorny, Ozawa and Mo kinetic models. It is found that all the kinetic models were established to describe the experimental data fairly well except the Ozawa model. The values of t _1/2, Z _C and F(T) indicated that the crystallization rate increased with increase in heating rates for PLLA and PLLA/La films. However, l-lactide dimer incorporated in PLLA films accelerates the crystallization process of PLLA at the high heating rate. The nucleation constant (K _g) and the surface free energy (σ _e) based on Lauritzen–Hoffman theory indicated that these parameters for PLLA/La films is lower than neat PLLA.     

Poly(l-lactide) initiated by silver N-heterocyclic carbene complexes: synthesis, characterization and properties

Poly(l-lactide) (PLLA) was successfully synthesized by ring-opening polymerization (ROP) in bulk using silver N-heterocyclic carbene (Ag–NHC) complex. The effect of reaction time, temperature and monomer/initiator ratio on polymerization process were determined. The optimum conditions were found as 130 °C, 4 h and M/I molar ratio of about 100. The polymers were characterized by FTIR, ¹H-NMR, GPC and TG. High-molecular-weight PLLA (M _w = 3.78 × 10⁴, M _n = 1.91 × 10⁴, PDI = 1.97) was synthesized by the ROP of l-lactide (LLA) with bis-(N-methyl N′-dodecylimidazole) silver(I) di-bromo argentate (1a) in bulk. The effect of different N-substituted ligand groups on the polymerization was studied. The antimicrobial activity of the synthesized polymers were investigated by using minimum inhibitory concentration test against gram positive (Staphylococcus aureus) and gram negative (Escherichia coli and Pseudomonas aeruginosa). It was observed that the synthesized polymers displayed moderate antimicrobial activity.     

Preparations and reactions of alkyl ethers of some aldohexoses

Aldohexose, such asd-glucose,d-galactose ord-mannose, reacted with acetone to give the following O-isopropylidene derivatives: 1,2;5,6-di-O-isopropylidene-d-glucofuranose (IA), 1,2;3,4-di-O-isopropylidene-d-galactopyranose (IB) or 2,3;5,6-di-O-isopropylidene-D-mannofuranose (IC). The O-isopropylidene derivative (IA～IC) reacted with alkyl/alkenyl halogenide to yield aldohexose ether compounds containing di-O-isopropylidene group, 3-O-alkyl-1,2;5,6-di-O-isopropylidene-d-glucofuranose (II), 6-O-alkyl-1,2;3,4-di-O-isopropylidene-d-galactopyranose (III) or 1-O-alkyl-2,3;5,6-di-O-isopropylidene-d-mannofuranoside (IV), in good yields. The Williamson ether synthesis was carried out using phase-transfer catalysis (PTC). The derived aldohexose alkyl ether containing di-O-isopropylidene group was hydrolyzed to give 3-O-alkyl-1,2-O-isopropylidene-d-glucofuranose (V) as a partial hydrolysis product; the complete hydrolysis of I～IV gave, as expected, 3-O-alkyl-glucopyranose (VI), 6-O-alkyl-galactopyranose (VII) or 1-O-alkyl-mannofuranoside (VIII). Further alkylation of (V) with Mel under PTC and subsequent acid hydrolysis gave 3-O-alkyl-5,6-di-O-methyl-d-glucofuranose (X). Methanolysis of III with catalytic amounts of H₂SO₄ gave 1-O-methyl-6-O-alkyl-d-galactofuranoside (XI). The elucidation of the galactofuranoside skeleton of (XI) was determined by means of its¹³C nuclear magnetic resonance spectra. The O-alkyl aldohexoses, e.g., X and XI, were evaluated and found to be emulsifiers.     

Amprometric detection of Glycine, l-Serine, and l-Alanine using glassy carbon electrode modified by NiO nanoparticles

Glassy carbon electrode modified with nickel oxide nanoparticles has been used to investigate the electrochemical oxidation of Glycine, l-Serine, and l-Alanine in an alkaloid solution. The electrochemical behavior of the modified electrode was characterized by cyclic voltammetry in detail. The electrocatalytic behavior is further exploited as a sensitive detection scheme for the above amino acids by hydrodynamic amperometry. Under optimized conditions, the calibration curves are linear in the concentration ranges of 1–200?μM for Glycine, 1–400?μM for l-Serine, and 30–200?μM for l-Alanine, respectively. The respective detection limit (S/N?=?3) and sensitivity are 0.9?μM and 24.3 nA μM^?1 for Glycine, 0.85?μM and 12.4 nA μM^?1 for l-Serine, and 29.67?μM and 0.4 nA μM^?1 for l-Alanine. The prepared electrode exhibits a satisfactory stability and long life-time, while it is stored at ambient conditions.     

Immobilized iron Schiff base histidine complexes on Al-MCM-41 and zeolite Y as catalyst for oxidation of cycloalkanes

Iron complexes of N-salicylidene-l-histidine with or without bipyridine ligand immobilized on Al-MCM-41 and zeolite Y designated as Fe(sal-l-his)(bipy)complex/Al-MCM-41 or Fe(sal-l-his)complex/Al-MCM-41 and Fe(sal-l-his)(bpy)complex/Y or Fe(sal-l-his)complex/Y respectively, were prepared and characterized by X-ray powder diffraction (XRD), FT-IR, N₂ adsorption/desorption and chemical analysis techniques. Fe(sal-l-his)/Al-MCM-41 and Fe(sal-l-his)(bipy)complex/Al-MCM-41 were found to successfully catalyze the oxidation of cyclohexane, methyl cyclohexane, cyclooctane and adamantane with H₂O₂. The oxidation results and promising catalytic behavior of Fe(sal-l-his)(bipy)complex/Al-MCM-41 for oxidation of cyclooctane with 90 % conversion and excellent selectivity toward the formation of cyclooctanone will be discussed in this presentation.     

l-Lysine-derived optically active poly(hydrazide-imide)s: synthesis, characterization and their application in removal of heavy metal ions

Six novel poly(hydrazide-imide)s (PHI _a–f ) were prepared from the reaction of a novel l-lysine-derived chiral diacid, ethyl l-lysine-N,N’-ditrimellitoyl diacide (1), with six synthetic dihydrazides by solution polycondensation. These polymers have inherent viscosities in the range of 0.22–0.45 dl g^?1, display optical activity, and are readily soluble in polar aprotic solvents. They start to decompose (T _10%) above 248 °C and display glass-transition temperatures at 164.37–210.20 °C. All the above polymers were fully characterized by UV, FT-IR, and ¹H NMR spectroscopy, TGA, DSC, inherent viscosity measurement and specific rotation.     

Poly(ester amide)s based on l-lactic acid oligomers and glycine: the role of the central unit of the l-lactic acid oligomers and their molecular weight in the poly(ester amide)s properties

Novel biodegradable poly(ester amide)s (PEAs) based on l-lactic acid (l-LA) oligomers and glycine were successfully synthesized, through an easy and fast procedure, making use of inexpensive starting materials. The l-LA oligomers were prepared with different central units and different molecular weights in order to access the influence of such parameters in the final properties of the PEAs’. Both the central unit of the l-LA oligomer and its molecular weight have important influence in the PEAs’ final properties. The thermal stability is lower for the PEAs containing the l-LA with the shortest central unit and for the PEAs based on the l-LA oligomers of high molecular weight. The PEAs exhibit a semi-crystalline nature, except those derived from the l-LA oligomers with high molecular weight, which have an amorphous character. Both hydrolytic and enzymatic degradation are more pronounced in PEAs synthesized from the l-LA oligomers with low molecular weight. Different mechanisms of degradation were found for the PEAs: bulk erosion and surface erosion, for hydrolytic degradation and enzymatic degradation tests, respectively.     

The Catalytic Conversion of d-Glucose to 5-Hydroxymethylfurfural in DMSO Using Metal Salts

A wide range of metal halides and triflates were examined for the conversion of d-glucose to HMF in DMSO. Chromium and aluminium salts were identified as the most promising catalysts. The effect of process variables like initial d-glucose concentration (0.1?C1.5?M), reaction time (5?C360?min) and reaction temperature (100?C140?°C) on the yield of HMF were examined at a fixed Al(OTf)₃ concentration (50?mM). Highest yields of HMF (60?mol%) were obtained using 1?M d-glucose (16?wt%), Al(OTf)₃ (5?mol%) at a temperature of 140?°C. A reaction pathway involving initial isomerisation of d-glucose to d-fructose followed by a number of dehydration steps is proposed. Kinetic analysis reveals that the reaction is second order in d-glucose with an activation energy of 138?kJ?mol^?1.     

l-Carnitine and Long-Chain Acylcarnitines are Positively Correlated with Ambulatory Blood Pressure in Humans: The SABPA Study

The prevalence of hypertension in sub-Saharan Africa is increasing rapidly, and treatment remains challenging. Although the use of l-carnitine in treatment has received much attention, studies reporting on physiological l-carnitine levels in hypertensives are limited. Our aim was to determine physiological levels of l-carnitine and acylcarnitines in African and Caucasian men, and to investigate associations between ambulatory blood pressure (BP) and carnitine levels. Participants included 101 African and 101 Caucasian teachers. Ambulatory BP measurements were conducted, and l-carnitine and acylcarnitine levels determined. African men showed significantly higher systolic BP (p < 0.001), diastolic BP (p < 0.001) and l-carnitine levels (p = 0.01). In both ethnic groups, partial regression analyses revealed a positive association between BP and l-carnitine, although in Caucasians it was with systolic (r = 0.20, p = 0.045), and in Africans with diastolic BP (r = 0.23, p = 0.023). After adjusting for confounders, an independent positive association between systolic (R ² = 0.37, β = 0.12, p = 0.041) and diastolic BP (R ² = 0.39, β = 0.14, p = 0.018) and l-carnitine and long-chain acylcarnitines (R ² = 0.38, β = 0.17, p = 0.005 and R ² = 0.39, β = 0.15, p = 0.011) were found, independent of ethnicity. Physiological l-carnitine levels were not only higher in Africans than in Caucasians but also above the expected reference range. Despite promising results on l-carnitine (and its short-chain derivatives) in hypertension treatment regimens, our findings paradoxically show that elevated BP is significantly associated with higher physiological l-carnitine and long-chain acylcarnitine levels.     

Oligomeric poly(imide-amides)s containing side 1,8-naphthalimidyl groups: synthesis and characterization

Poly(imide-amide)s (PIAs) were synthesized from isophthalic acids, which have in position 5 a bulky group like 1,8-naphthalimidyl bonded to amino acids as flexible spacers, and the diamine bis(4-aminophenyl)diphenylsilane, which provides a polar group in the main chain. Glycine, l-alanine, l-phenylalanine, l-valine and p-aminobenzoic acid were used as amino acids. Polymers were obtained according to the Yamazaki method and characterized by elemental analysis, optical activity, IR and ¹H, ¹³C and ²⁹Si NMR spectroscopy. PIAs were soluble in aprotic polar solvents but not in common organic solvents, and obtained with low η _inh values, which was an indicative of low molecular weights species, probably of oligomeric nature. According to the polymeric structure, the only difference between PIAs is the structure of the amino acid residue, and in this sense it was possible to see an increase of the T _g values when the volume of the amino acid residue also increased, due to the lower possibility of internal mobility of the side chains. The higher Tg value was obtained with the PIA-e, which includes an aromatic ring as a side chain, derived from p-aminobenzoic acid. PIAs, in spite of the good TDT values obtained, were not thermally stable in the sense that the 10 % of weight lost was obtained at lower temperature than 400 °C, with the exception of PIA-e derived from p-aminobenzoic acid. However, there was an increase of the TDT values when the volume of the amino acid residue increases. The PIAs do not show good UV–vis transparence probably due to the low free volume of those including an aliphatic amino acid residue.     

Facile synthesis of branched chitin by glycosylation of fully trimethylsilylated chitin with a glucosamine-derived oxazoline

A simple and straightforward procedure for synthesizing branched chitin and chitosan has been developed on the basis of the glycosylation of trimethylsilylated chitin with an oxazoline derived from d-glucosamine. Chitin was first trimethylsilylated, and the derivative was treated with the oxazoline to introduce peracetylated d-glucosamine branches into the chitin backbone. The extent of branching was dependent on the amount of the oxazoline and reaction time, and under appropriate conditions, it reached around 0.65. Selective O-deacetylation or thorough N,O-deacetylation of the resulting glycosylated product gave chitin having N-acetyl-d-glucosamine branches or chitosan having d-glucosamine branches.     

Effect of l-Histidine Substitution on Sol–Gel of Transition Metal Coordinated Poly Ethyleneimine: Synthesis and Biochemical Characterization

The study was aimed to investigate the effect of chemical modification of branched poly ethyleneimine (PEI) on chelation of transition metal ions (Me²⁺) including Zn²⁺, Cu²⁺ or Ni²⁺ and sol–gel conversion thereof. To modulate chelation property of PEI, imidazole moieties were introduced into the polymer backbone by carbodiimide chemistry at different molar ratios of fmoc-protected l-histidine. The synthesis was characterized by ¹H-NMR spectroscopy and size exclusion chromatography. Potentiometric titration of PEI/Me²⁺ aqueous dispersions showed formation of stable complexes at pH above 5 depending on the degree of l-histidine substitution. FT-IR spectroscopy showed the imidazole ring of l-histidine was involved in the coordination interactions between PEI and Me²⁺. Addition of Zn²⁺ to PEI solution induced sol–gel conversion at a critical molar ratio decreasing by a higher degree of l-histidine modification. The gelation process led to formation of stable globular nanostructures as confirmed by atomic force microscopy with projected mean diameters less than 200 nm. Cellular experiment showed that l-histidine substitution enhanced cyto-compatibility of PEI, moreover cytotoxicity decreased significantly upon coordination of Zn²⁺ with the polymers. Conclusively, the coordination complexes of Zn²⁺ and l-histidine substituted PEI could serve as a nano system for biomedical applications.     

Aggregation of polylactide with carboxyl groups at one chain end in the presence of metal cations

Polylactides with one or more carboxyl groups at one chain end were synthesized by cationic polymerization according to activated monomer mechanism and by application of “thiol-yne” click chemistry for subsequent functionalization. End groups of such obtained polylactides were converted into ionic groups by neutralization of polymer solutions with metal oxides, mainly calcium oxide, and the aggregation of individual stereoisomers as well as that of the mixture of poly(l-lactide) (PLLA) and poly(d-lactide) (PDLA) was investigated. The extent and progress of the aggregation was followed by viscosity measurements, and aggregated polymers in the solid state were examined by SEM and DSC. Solution viscosity increase was observed upon the aggregation of individual PLA stereoisomers, whereas PLA stereocomplex precipitation occurred in the case of the aggregation of PLLA/PDLA/metal oxide mixture.     

Synthesis and solubility of polylactide-co-poly(amino acid) random copolymer

Random copolymers of polylactide-co-poly(amino acids) with a molecule weight range of 5,000–20,000 g/mol were obtained by ring-opening polymerization of l-lactic acid O-carboxyanhydride with amino acid-N-carboxyl anhydride in the presence of DMAP as an initiator. The structures of the copolymers were characterized with IR, ¹H-NMR, ¹³C-NMR, and GPC. The results show that the polymerization activity of amino acid-N-carboxyl anhydride is higher than that of l-lactic acid O-carboxyanhydride. Copolymers of polylactide-co-poly(amino acid) can improve the solubility of poly(amino acid) in organic solvents.     

Random copolymerization of ε-caprolactone and l-lactide with molybdenum complexes

Dioxomolybdenum complexes were examined as catalysts for the copolymerization of ε-caprolactone (ε-CL) and l-lactide (l-LA). The bis-[(5-OMe)salicylaldehydato]dioxomolybdenum complex completed the copolymerization after 20 h at 110 °C with 0.05 mol% of the catalyst to produce a copolymer in high yield. The microstructure of the copolymer was analyzed using ¹H and ¹³C NMR spectroscopy and was determined to have a random structure. The r values calculated from the heterodiad analysis of the ¹H NMR data were r _LA = 0.91 and r _CL = 0.93, and the L values calculated from the triad analysis of the ¹³C NMR data were L _LA = 1.58 and L _CL = 1.81. Other dioxomolybdenum complexes, such as cis-α MoO₂[(3-MeO)DiMeSaltn], MoO₂(acac)₂ and (NH₄)₈[Mo₁₀O₃₄] exhibited comparable or slightly lower reactivity for the copolymerization. Consecutive polymerization of ε-CL followed by l-LA afforded a block copolymer without trans-esterification.     

Chiral Homobimetallic Palladium(II) Complexes Composed of Chirality-Organized Quinonediimines Bearing Amino Acid Moieties

The chirality-organized quinonediimine derivatives bearing amino acid moieties were demonstrated to react with 2 molar equiv. of Pd(OAc)₂, resulting in the formation of the chiral homobimetallic palladium(II) complexes. The crystal structures of the chiral conjugated complexes revealed the coordination of the quinonediimine nitrogen to a palladium center and a chiral propeller twist conformation of the π-conjugated backbone. The mirror image relationship of the CD signals around the quinonediimine moieties in acetonitrile was observed between l- and d-derivatives, indicating the preservation of the chirality-organized structures even in a solution.     

Porous chitosan-based adhesive patch filled with poly(l-3,4-dihydroxyphenylalanine) as a transdermal drug-delivery system

Bioadhesives have been widely used on surgical areas for more than 50 years. Despite their numerous advantages, drawbacks such as cytotoxicity and low efficiency of transdermal drug delivery have limited their applications. Consequently, bioadhesives are mainly used during emergencies. To improve the physical properties of bioadhesive materials, poly(l-3,4-dihydroxyphenylalanine) or poly(l-DOPA) was synthesized and used to fill 2 kinds of porous chitosan patches (high and medium molecular weight). Bioaddisive and patch properties such as bond strength, drug-delivery efficiency, morphology, cytotoxicity, and histology were characterized. We ascertained that the optimal combination for high bond strength was 77.9 % polymethacrylic acid (PMA, molecular weight: 9,500 Da) and 22.1 % l-DOPA. Drug release was 1.5 times faster from the poly(l-DOPA)-filled chitosan patch of medium molecular weight than from the high molecular weight patch. Further, the medium molecular weight chitosan patch was more efficient at wound healing than commercial glue. These results indicate that chitosan-based materials filled with poly(l-DOPA) can be used as adhesive patches in various fields.     

Avoidance of nonprotein amino acid incorporation into protein by the seed predator,Caryedes brasiliensis (Bruchidae)

Larvae of the bruchid beetle,Caryedes brasiliensis (Bruchidae) have the ability to avoid significant incorporation ofl-canavanine, the guanidinooxy structural analog ofl-arginine, into de novo synthesized proteins. This ability is related to a highly discriminatory protein-synthesizing system which exhibits marked ability to avoid processing an array of nonprotein amino acids structurally related to arginine.