Effects of increased humidity on physiological responses,thermal comfort,perceived air quality,and Sick Building Syndrome symptoms at elevated indoor temperatures for subjects in a hot-humid climate

Recently, studies suggest that the average indoor temperature is typically >30°C and that the maximum temperature can reach 37.5°C in hot-humid areas. However, the effects caused by increasing the humidity at high indoor temperatures are not clear. In this study, twelve female and twelve male subjects were exposed to different operative temperature (26.6, 30.6, and 37.4°C) and relative humidity (50% and 70%) in a climate chamber. Data concerning thermal sensation, perceived air quality, and Sick Building Syndrome (SBS) were collected during 190-min-long exposure to each thermal condition. Heart rate, respiration rate, respiratory ventilation rate, mean skin temperature, and eardrum temperature were measured. It was found that increasing the relative humidity from 50% to 70% at 26 and 30°C had no significant effects on the physiological responses, thermal comfort, perceived air quality, or SBS symptoms of the subjects. However, when the temperature was elevated to 37°C, the heart rate, respiration rate, respiratory ventilation rate, mean skin temperature, and eardrum temperature increased significantly as a result of the increase in the relative humidity from 50% to 70%. The subjects felt hotter and more uncomfortable, and they found indoor air quality was more difficult to accept. The subjects are acclimatized to hot environments and more tolerant to heat. Therefore, the results are applicable to the acclimated people living in hot-humid climate.     

Thermal comfort,perceived air quality,and cognitive performance when personally controlled air movement is used by tropically acclimatized persons

In a warm and humid climate, increasing the temperature set point offers considerable energy benefits with low first costs. Elevated air movement generated by a personally controlled fan can compensate for the negative effects caused by an increased temperature set point. Fifty‐six tropically acclimatized persons in common Singaporean office attire (0.7 clo) were exposed for 90 minutes to each of five conditions: 23, 26, and 29°C and in the latter two cases with and without occupant‐controlled air movement. Relative humidity was maintained at 60%. We tested thermal comfort, perceived air quality, sick building syndrome symptoms, and cognitive performance. We found that thermal comfort, perceived air quality, and sick building syndrome symptoms are equal or better at 26°C and 29°C than at the common set point of 23°C if a personally controlled fan is available for use. The best cognitive performance (as indicated by task speed) was obtained at 26°C; at 29°C, the availability of an occupant‐controlled fan partially mitigated the negative effect of the elevated temperature. The typical Singaporean indoor air temperature set point of 23°C yielded the lowest cognitive performance. An elevated set point in air‐conditioned buildings augmented with personally controlled fans might yield benefits for reduced energy use and improved indoor environmental quality in tropical climates.     

Disinfection by in-duct ultraviolet lamps under different environmental conditions in turbulent airflows

In this study, we investigated the effects of environmental factors such as airflow velocity, relative humidity (RH), temperature, and duct reflectance on the performance of in-duct UVC lamps. Staphylococcus epidermidis, Pseudomonas alcaligenes, and Escherichia coli were used as the test bacteria. The UV irradiance, disinfection efficacy, and UV susceptibility constant (Z value) of the test bacteria were experimentally determined. The results showed that the UV disinfection efficacy decreased as the airflow velocity and RH increased. The maximum UV disinfection efficacy was obtained at temperature of 20-21°C compared with the performance at lower temperature (15-16°C) and higher temperature (25-26°C). When the RH increased from 50% to 90%, the Z values of airborne bacteria reduced by 40%, 60%, and 38% for S epidermidis, P alcaligenes, and E coli, respectively. Besides, susceptibility constants had lower values under both cooling temperature (15-16°C) and heating temperature (25-26°C) compared with that under the temperature of 20-21°C. It was observed that S epidermidis generally had the highest resistance to the UV irradiance. The results also showed that the UV disinfection efficacy was lower in the duct with a black surface than in the clean duct.     

Use of personalized ventilation for improving health,comfort, and performance at high room temperature and humidity

The effect of personalized ventilation (PV) on people's health, comfort, and performance in a warm and humid environment (26 and 28°C at 70% relative humidity) was studied and compared with their responses in a comfortable environment (23°C and 40% relative humidity). Thirty subjects participated in five 4‐h experiments in a climate chamber. Under the conditions with PV, the subjects were able to control the rate and direction of the supplied personalized flow of clean air. Subjective responses were collected through questionnaires. During all exposures, the subjects were occupied with tasks used to assess their performance. Objective measures of tear film stability, concentration of stress biomarkers in saliva, and eye blinking rate were taken. Using PV significantly improved the perceived air quality (PAQ) and thermal sensation and decreased the intensity of Sick Building Syndrome (SBS) symptoms to those prevailing in a comfortable room environment without PV. Self‐estimated and objectively measured performance was improved. Increasing the temperature and relative humidity, but not the use of PV, significantly decreased tear film quality and the concentration of salivary alpha‐amylase, indicating lower mental arousal and alertness. The use of PV improved tear film stability as compared to that in a warm environment without PV.     

Physiological and psychological reactions of sub‐tropically acclimatized subjects exposed to different indoor temperatures at a relative humidity of 70%

Thermal comfort, self‐reported acute health symptoms, cognitive performance, and physiological reactions were examined at four temperatures (26, 30, 33, and 37°C) at a relative humidity of 70%. Thirty‐two sub‐tropically acclimatized subjects experienced each condition for 175 minute, in balanced order, in a climatic chamber. The perception of heat gradually increased with increasing temperature, but the subjects felt hot only at 37°C. The temperature of 33°C was on average rated as acceptable and only just uncomfortable. The acceptability of air quality decreased linearly with increasing temperature. The intensity of acute health symptoms reported by the subjects increased with increasing temperature, but it was no more than moderate even at the highest temperature; dryness of skin and eye were alleviated. The eardrum temperature, skin temperature and moisture, heart rate, end‐tidal carbon dioxide, and weight loss increased significantly with increasing temperature, whereas the percentage of adjacent heart inter‐beat intervals differing by >50 ms decreased significantly. These results suggest that the perceived heat, self‐reported symptoms, and physiological reactions occurred concurrently. They show additionally that acclimatization to heat may shift the boundary of thermal discomfort to a higher temperature. The role of psychological adaptation and of the contextual aspects of this process still requires clarification in future experiments.     

Correlating indoor and outdoor temperature and humidity in a sample of buildings in tropical climates

The incidence of several respiratory viral infections has been shown to be related to climate. Because humans spend most of their time indoors, measures of indoor climate, rather than outdoor climate, may be better predictors of disease incidence and transmission. Therefore, understanding the relationship between indoor and outdoor climate will help illuminate their influence on the seasonality of diseases caused by respiratory viruses. Indoor-outdoor relationships between temperature and humidity have been documented in temperate regions, but little information is available for tropical regions, where seasonal patterns of respiratory viral diseases differ. We have examined indoor-outdoor correlations of temperature, relative humidity (RH), and absolute humidity (AH) over a 1-year period in each of seven tropical cities. Across all cities, the average monthly indoor temperature was 25 ± 3°C (mean ± standard deviation) with a range of 20–30°C. The average monthly indoor RH was 66 ± 9% with a range of 50–78%, and the average monthly indoor AH was 15 ± 3 g/m³ with a range of 10–23 g/m³. Indoor AH and RH were linearly correlated with outdoor AH when the air conditioning (AC) was off, suggesting that outdoor AH may be a good proxy of indoor humidity in the absence of AC. All indoor measurements were more strongly correlated with outdoor measurements as distance from the equator increased. Such correlations were weaker during the wet season, especially when AC was in operation. These correlations will provide insight for assessing the seasonality of respiratory viral infections using outdoor climate data, which is more widely available than indoor data, even though transmission of these diseases mainly occurs indoors.     

Study on the lower limit of indoor humidity subject experiments on psychological responses

As a basis for determining the lower limit of acceptable humidity in an indoor environment, experiments were conducted for 25 subjects to assess the maximum expected sensations of dryness, discomfort based on humidity, and intolerance based on humidity, under conditions of 26°C and 10% RH. As results, distinct negative evaluations (dry, uncomfortable, or intolerable) were not obtained as the majority response; however, a small number of subjects declared distinct negative responses. In addition to the whole-body evaluation, the sensations for individual body parts were collected and found to be more intense for the eyes, nose, throat, and lips than for the other body parts. Significant differences between the genders were not found. For 8 of the subjects, similar experiments under a condition of 30% RH were conducted, and the difference between two humidity conditions was clearer for discomfort and intolerance than for dryness. The results suggest that the evaluation of the specific individuals who respond intensely, the consideration of intense responses for a specific part of the body, and the careful selection of an evaluation word for a psychological response might be effective to link this study to the determination of the lower limit of indoor humidity.     

Impact of individually controlled facially applied air movement on perceived air quality at high humidity

The effect of facially applied air movement on perceived air quality (PAQ) at high humidity was studied. Thirty subjects (21 males and 9 females) participated in three, 3-h experiments performed in a climate chamber. The experimental conditions covered three combinations of relative humidity and local air velocity under a constant air temperature of 26 °C, namely: 70% relative humidity without air movement, 30% relative humidity without air movement and 70% relative humidity with air movement under isothermal conditions. Personalized ventilation was used to supply room air from the front toward the upper part of the body (upper chest, head). The subjects could control the flow rate (velocity) of the supplied air in the vicinity of their bodies. The results indicate an airflow with elevated velocity applied to the face significantly improves the acceptability of the air quality at the room air temperature of 26 °C and relative humidity of 70%.     

Impact of Temperature and Humidity on Chemical and Sensory Emissions from Building Materials

Abstract The chemical and sensory emissions from five building materials (carpet, polyvinyl chloride (PVC) flooring, sealant, floor varnish and wall paint) were tested under different combinations of temperature and relative humidity in the ranges 18–28°C and 30–70% relative humidity (RH). The experiment was performed in a climate chamber where a specially designed test system was built to study emissions from the five materials. The test system could provide different temperatures and humidities of air around the materials, while the air, after being polluted by the emissions from the materials, could be reconditioned to 23°C and 50% RH for sensory assessments. The experiment was designed to separate the direct impact of temperature and humidity on perception from the impact on sensory emission. The study found little influence of temperature on the emissions from the five materials whether expressed in chemical or sensory terms. The effect of humidity was found to be significant only for the waterborne materials – floor varnish and wall paint. Compared with the direct impact of temperature and humidity on the perception of air quality, the impact of temperature and humidity on sensory emissions from the building materials has a secondary influence on perceived air quality.     

Modelling of heat and moisture transfer in buildings: II. Applications to indoor thermal and moisture control

The objective of this work is to evaluate the possibility of ensuring indoor temperature and relative humidity in an acceptable range by controlling heating and ventilation associated with minimising the energy consumption or cost by the use of a numerical simulation program. An acceptable indoor range means that indoor temperature is 20 °C with small fluctuation and relative humidity is in the range of 20–70%. A simple heating and ventilation control regulation is proposed. Simulation examples are conducted for different types of buildings based on energy consumption or cost factor. Simulations demonstrate that the indoor condition is much more improved and significant energy consumption or cost can be reduced by using the control regulation developed in this paper.     

The effect of moderate thermal stress on the potential work performance of factory workers — an interim report

An extended study of the effect of moderate thermal stress on the performance of tasks simulating aspects of industrial work has been under way since 1977. Factory workers were used as test subjects, each being exposed to a single test condition for a full shift in a mobile climate laboratory.Analyses completed so far reveal a fall in the performance of manipulative tasks of approximately 10% when finger skin temperatures (FST) fall to 20°C, and a further 10% at about 12°C. The FST of black male subjects typically reached these values at air temperatures about 4°C higher than gave rise to similar FST's in white subjects.For many of the tasks the air temperature which produced best performance in the range 20–38°C, was 32°C at a relative humidity of 25%. The subjects nevertheless reported preferred temperatures in the expected range of 20–23°C.     

Summer indoor heat exposure and respiratory and cardiovascular distress calls in New York City,NY, U.S.

Most extreme heat studies relate outdoor weather conditions to human morbidity and mortality. In developed nations, individuals spend ~90% of their time indoors. This pilot study investigated the indoor environments of people receiving emergency medical care in New York City, NY, U.S., from July to August 2013. The first objective was to determine the relative influence of outdoor conditions as well as patient characteristics and neighborhood sociodemographics on indoor temperature and specific humidity (N = 764). The second objective was to determine whether cardiovascular or respiratory cases experience hotter and more humid indoor conditions as compared to controls. Paramedics carried portable sensors into buildings where patients received care to passively monitor indoor temperature and humidity. The case–control study compared 338 respiratory cases, 291 cardiovascular cases, and 471 controls. Intuitively, warmer and sunnier outdoor conditions increased indoor temperatures. Older patients who received emergency care tended to occupy warmer buildings. Indoor‐specific humidity levels quickly adjusted to outdoor conditions. Indoor heat and humidity exposure above a 26 °C threshold increased (OR: 1.63, 95% CI: 0.98–2.68, P = 0.056), but not significantly, the proportion of respiratory cases. Indoor heat exposures were similar between cardiovascular cases and controls.     

Adaptive temperature limits for air-conditioned museums in temperate climates

Indoor temperature (T) and relative humidity (RH) are important for collection preservation and thermal comfort in museums. In the 20th century, the notion evolved that T and RH need to be stringently controlled, often resulting in excessive energy consumption. However, recent studies have shown that controlled fluctuations are permissible, enabling improved energy efficiency. Consequently, the thermal comfort requirements are increasingly important to determine temperature limits, but knowledge is limited. Therefore, a thermal comfort survey study and indoor measurements were conducted at Hermitage Amsterdam museum in Amsterdam, the Netherlands for one year, including: (1) monitoring of existing conditions (T?=?21°C, RH?=?50%); and (2) an intervention in which T is controlled based on an adaptive comfort approach (T?=?19.5–24°C, RH?=?50%). The results show that the thermal comfort of the existing conditions is far from optimum; visitors feel too cool in summer and slightly too warm in winter. The adaptive temperature limits were developed to improve thermal comfort significantly without endangering the collection, thereby saving energy. Furthermore, facilitating visitors to adapt their clothing may contribute to enlarging the temperature bandwidth and improve (individual) thermal comfort.     

Influence of air humidity and the distance from the source on negative air ion concentration in indoor air

Although negative air ionizer is commonly used for indoor air cleaning, few studies examine the concentration gradient of negative air ion (NAI) in indoor environments. This study investigated the concentration gradient of NAI at various relative humidities and distances form the source in indoor air. The NAI was generated by single-electrode negative electric discharge; the discharge was kept at dark discharge and 30.0 kV. The NAI concentrations were measured at various distances (10-900 cm) from the discharge electrode in order to identify the distribution of NAI in an indoor environment. The profile of NAI concentration was monitored at different relative humidities (38.1-73.6% RH) and room temperatures (25.2+/-1.4 degrees C). Experimental results indicate that the influence of relative humidity on the concentration gradient of NAI was complicated. There were four trends for the relationship between NAI concentration and relative humidity at different distances from the discharge electrode. The changes of NAI concentration with an increase in relative humidity at different distances were quite steady (10-30 cm), strongly declining (70-360 cm), approaching stability (420-450 cm) and moderately increasing (560-900 cm). Additionally, the regression analysis of NAI concentrations and distances from the discharge electrode indicated a logarithmic linear (log-linear) relationship; the distance of log-linear tendency (lambda) decreased with an increase in relative humidity such that the log-linear distance of 38.1% RH was 2.9 times that of 73.6% RH. Moreover, an empirical curve fit based on this study for the concentration gradient of NAI generated by negative electric discharge in indoor air was developed for estimating the NAI concentration at different relative humidities and distances from the source of electric discharge.     

Impact of Temperature and Humidity on Perception of Indoor Air Quality During Immediate and Longer Whole-Body Exposures

Abstract Acceptability of clean air and air polluted by building materials was studied in climate chambers with different levels of air temperature and humidity in the ranges 18–28°C and 30-70% relative humidity (RH). The acceptability of the air quality immediately after entering a chamber and during the following 20-min whole-body exposure was assessed by 36 untrained subjects who maintained thermal neutrality by modifying their clothing. The results confirm the significant decrement of the acceptability with increasing temperature and humidity, as shown in a previous study with facial exposures. The odour intensity was found to be independent of temperature and humidity. A linear relation between acceptability and enthalpy of air was again observed by this experiment. No significant difference was observed between the immediate acceptability and the acceptability during the following 20-min exposure, i.e., no adaptation took place. Both the immediate assessment of acceptability and the assessments during the 20-min exposure were independent of the air temperature and humidity to which the subjects were exposed before entering the chamber. The results further indicate that a notable decrement of the ventilation requirement may be achieved by maintaining a moderate enthalpy of air in spaces.     

Diffusion‐controlled reference material for VOC emissions testing: effect of temperature and humidity

A polymethylpentene film loaded with toluene is being developed as a reference material to support the reliable measurement of volatile organic compound emissions from building materials using environmental chambers. Earlier studies included the measurement of the material‐phase diffusion coefficient (D) and material/air partition coefficient (K) at 23°C. A fundamental mass‐transfer model can then be used to predict toluene emissions from the reference material at 23°C, serving as a reference for validating chamber‐measured emission profiles. In this study, the effect of temperature and humidity on performance of the reference material was investigated. Reference material emissions were measured at 10, 23, and 30°C and at different relative humidity (RH) levels. D and K at different temperatures and RH were determined using an independent method. Results showed that RH does not significantly affect D and K and had no effect on emissions. However, emissions increased substantially at elevated temperatures due to the relationship between D and temperature. A statistical analysis shows good agreement between model‐predicted and measured gas‐phase concentrations, indicating that the model can accurately predict emission profiles as a function of temperature. The reference material can therefore be applied to a wide range of emission chamber testing conditions.     

The Effects Of Air Temperature And Relative Humidity On Thermal Comfort In The Office Environment

The objective of this study was to assess the effect of air humidification and temperature on thermal comfort in sedentary office work. A blinded twelve-period cross-over trial was carried out in two similar wings of an office building, contrasting 28–39% steam humidification with no humidification, corresponding to 12–28% relative humidity. The length of each period was one working week. The study population was 169 workers who judged their thermal sensations in a weekly questionnaire. The percentage of dissatisfied was lowest when the air temperature was 22 °C. At 22 °C an increase in relative humidity raised the mean thermal sensation only slightly. At 20 °C when the air was humidified there were fewer workers who judged their air temperature as being too low. On the other hand, at 24 °C humidification increased the percentage of workers who judged their air temperature to be too high. The percentage of dissatisfied increased rapidly when the air temperature was outside of its optimum value, 22 °C. The percentage of workers complaining about draft increased when the air temperature was lower than 22 °C. Thus we consider that the temperature range from 20 to 24 °C during wintertime may be too wide without individual temperature control from the point vzew of thermal comfort. We recommend that the air temperature should be kept between 21 and 23 °C if no individual control is available. The best solution would be individual temperature control permitting adjustment of the temperature at 22 ± 2 °C.     

Survival of the House Dust Mite,Dermatophagoides farinae,at High Temperatures (40–80°C)

Abstract Experiments were conducted to evaluate the survival time of randomly selected female D. farinae exposed to temperatures from 40 to 80°C and relative humidities (RHs) between 10 and 90%. Significant temperature effects were found on the length of time mites can survive under those conditions. The time needed to induce 100% mortality for female D. farinae held at 40°C varied between 39 and 84 h. At 70 and 80°C, all mites died within 5 minutes. At 50°C and above, RH had little influence and temperature alone was the determining factor for mite survival. The length of survival time decreased precipitously between 40 and 50°C, suggesting that a loss of physiological integrity of female D. farinae probably occurred in this range. The results of this study indicated that the technique of raising temperatures to above 40°C for a short duration can be used to reduce living house dust mite populations in homes significantly.     

Increasing the indoor humidity levels in buildings with ventilation systems: Simulation aided design in case of passive houses

In modern societies, people spend about 90 percent of their time inside buildings. The challenge of building physics is to ensure that buildings are planned, constructed and built to provide a comfortable and healthy working and living environment. As construction style has changed during recent years, the planning phase has to be much more precise and the need of simulation programs that respond to every little change arises. An increasing problem in Austria is the indoor humidity. In the field of renovated buildings with airtight new building envelopes, mould growth due to high indoor relative humidity (RH) is a persistent problem. On the other hand, in recently realized Austrian passive houses with an air treatment system, the low humidity level of the indoor air is a problem with which scientists have been struggling for some time. It has been observed in numerous measurements and it is also easily computationally detectable that in winter period the indoor relative humidity level often drops below 30% RH. Low and high relative humidity levels have negative effects on the comfort feeling and health of the occupants of the dwelling and should therefore be avoided. However, it is expensive to increase or decrease the humidity in houses mechanically. Therefore, the existing room moisture should be used sensibly in buildings with a ventilation system. In buildings with a high indoor humidity it is necessary to adjust the ventilation depended on moisture production. This paper focuses on low indoor humidity and presents some different methods by which the indoor relative humidity can be regulated. The effects of adapting parameters such as ventilation rate and buffering material in the dwelling were clearly reflected in the measured temperature and relative humidity. “BuildOpt_VIE” software developed at the Vienna University of Technology was used for the dynamic building simulation in this study.     

Perceived air quality and cognitive performance decrease at moderately raised indoor temperatures even when clothed for comfort

This study investigated whether adjusting clothing to remain in neutral thermal comfort at moderately elevated temperature is capable of avoiding negative effects on perceived acute subclinical health symptoms, comfort, and cognitive performance. Two temperatures were examined: 23°C and 27°C. Twelve subjects were able to remain thermally comfortable at both temperatures by adjusting their clothing. They rated the physical environment, their comfort, the intensity of acute subclinical health symptoms, and their mental load, and they performed a number of cognitive tasks. Their physiological reactions were monitored. Their performance of several tasks was significantly worse at 27°C, and they reported increased mental load at this temperature. Skin temperature and humidity and respiration rate were higher, while blood oxygen saturation (SpO2) and pNN50 were lower at this temperature, the latter indicating increased stress. It is inferred that the observed physiological responses were mainly responsible for the negative effects on performance, as the subjects did not indicate any increased intensity of acute subclinical health symptoms although perceived air quality was worse at the higher temperature. The present results suggest that moderately elevated temperatures should be avoided even if thermal comfort can be achieved, as it may lead to reduced performance.