Synthesis of poly[2]catenane having rigid linkage by 1,3-dipolar cycloaddition of diazido[2]catenane with 4,4′-diethynylbiphenyl

A novel poly[2]catenane having rigid triazole rings between [2]catenane moieties was synthesized by the 1,3-dipolar cycloaddition of diazido[2]catenane with 4,4′-diethynylbiphenyl. The reaction proceeded effectively under mild conditions and gave a polymer in high yield. The number average molecular weight (M_n) of the polymers was 1.5 × 10⁴-2.5 × 10⁴. A cyclic dimer consisting of two [2]catenane moieties and two biphenylene units was formed along with the polymer. The cyclodimerization was suppressed by performing the reaction at a low temperature without lowering the yield or molecular weight of the polymer. The novel poly[2]catenane had higher solubility in some solvents than the corresponding non-catenated polymer having a similar primary structure.     

Pirouetting in chiral [2]catenanes

One of the best known classes of mechanically interlocked molecules is the category of [ 2 ]catenanes, which exhibit donor-acceptor interactions between the 1,5-dioxynaphthalene (DNP) units in a crown ether and the bipyridinium units in the tetracationic cyclophane, cyclobis(paraquat-p-phenylene) (CBPQT⁴⁺). In order to gain an in-depth understanding and appreciation of the stereochemistry and dynamic behavior of these [ 2 ]catenanes, chiral analogues—having both the DNP ring, which is capable of displaying planar chirality, and the axially chiral binaphthol (BINAP) moiety (as both enantiomers and as the racemic modification), in a crown ether, in addition to the CBPQT⁴⁺ cyclophane—have been synthesized using a template-directed protocol. Dynamic ¹H NMR spectroscopy shows that (i) the presence of immutable axial chirality, arising from the BINAP moiety in the crown ether component, leads to no induction of diastereoselectivity—the chiral catenanes exist as a mixture of diastereoisomers in solution at low temperatures in the approximate ratio of 1:1, (ii) the barrier (ΔG_cD̊) to the interconversion between these two diastereoisomers is 7.9 ± 0.1 kcal mol⁻¹ at 171 K, and (iii) no induction of diastereoselectivity is observed upon the addition of a chiral solvating agent to the chrial catenanes. The pattern of behavior in the variable temperature ¹H NMR spectra and the low ΔTG_cD̊ value indicates that the dynamic process involving the interconversion between these two diastereoisomers is one of a pirouetting nature. Of the four possible diastereoisomers, only two, (R)-(pR/pS) or (S)-(pR/pS), are shown to exist in solution.     

Kupfer,Silber, Gold; fixiert in metallorganischen π-Pinzetten

Alkinyl functionalized titanocenes of general type RC≡C-[Ti]-C≡CR and Cl-[Ti]-C≡CR {[Ti] = (η⁵-C₅H₄-SiMe₃)₂Ti}; R = singly bonded organic ligand} can successfully be used as organometallic π-tweezers to stabilize numerous mononuclear MX/R¹ species (M = Cu, Ag, Au; X = singly bonded inorganic group; R¹ = singly bonded organic ligand). The synthesis, manifold reaction chemistry as well as bonding and spectroscopy of {[Ti](C≡CR)₂}MX/R¹ and {[Ti] (C≡CR)(Cl)}CuX complexes is described     

Functionalization of cotton fabric orienting towards antibacterial activity

The primary objective of modifying cotton fabric was to impart bactericidal properties to attract various fields such as defence, space and textile industrial applications. Chemically initiated graft copolymerization of 4-vinyl pyridine (4-VP) and acrylonitrile (AN) onto cotton fabric was carried out using ceric ammonium nitrate as a redox initiator. Optimum conditions pertaining to maximum percentage of grafting were evaluated as a function of concentration of initiator [CAN], concentration of nitric acid, monomer concentration, water, temperature and reaction time. Maximum grafting of 4-VP (51.63%) and AN (69.23%) was obtained respectively at optimum [ \textCAN ] = 2.738 ×10 ^{- 2} \left[ {\text{CAN}} \right] = 2.738 \times {10^{ - 2}} and 2.19 × 10⁻² moles/L, [ 4 - \textVP ] = 47.55 ×10 ^{- 22}\textmoles/\textL \left[ {4 - {\text{VP}}} \right] = 47.55 \times {10^{ - 22}}{\text{moles}}/{\text{L}} , [ \textAN ] = 18.85 ×10 ^{- 22}\textmoles/\textL \left[ {\text{AN}} \right] = 18.85 \times {10^{ - 22}}{\text{moles}}/{\text{L}} , [ \textHN\textO₃ ] = 11.9 ×10 ^{- 2} \left[ {{\text{HN}}{{\text{O}}_3}} \right] = 11.9 \times {10^{ - 2}} and 89.5 × 10⁻²² moles/L in 20 and 25 ml of water at an optimum temperature 70 °C and 60 °C with in 180 and 120 min. Antibacterial properties were induced into the modified cotton fabric by treating the grafted fabric with benzyl chloride. The grafted and quaternized copolymer were characterized by FTIR and Thermogravimetrical analysis. The bactericidal action of cotton fabric was tested by filtration test and it was observed that fabric grafted with 4-VP was more effective and efficient antibacterial as compared to AN grafted cotton sample.     

Influencing the outcome: Diorganotin(IV) ladder to macrocycle conversion through solvent selection

The self-assembly of tetrabutyldistannoxane ladder {[ⁿBu₂Sn(LH)]₂O}₂ 1 upon crystallization in xylene affords the novel cyclic dimer [ⁿBu(L_xH)Sn]₂ 2, featuring a 22-membered macrocycle. The dimer also contains a 2-fold linkage of neighbouring units via intermolecular Sn-O contacts, giving rise to polymeric 1D chains in which the tin atoms assume pentagonal bipyramidal environments by means of additional Sn-O_catecholate contacts.     

Two Syntheses of [2.2.2] (1,2,3)Cyclophane

Two syntheses are presented for [2.2.2] (1,2,3)cyclophane (7), the remaining member of the symmetrical [2_n]cyclophanes whose preparation has not previously been described. The first method involved the dimerization of 2,6-bis (4′, 4′-dimethyl-2′-oxazolinyl)toluene ( 1 ) to give 2 which, on hydrolysis, produced the tetracarboxylic acid 3 . Conversion of 3 , via the acid chloride ( 4 ), to the tetraol 5 , followed by treatment with phosphorus tribromide yielded the tetrabromide 6 . The overall scheme was then completed by reaction of 6 with phenyllithium to give [2.2.2] (1,2,3) cyclophane ( 7 ). An alternate, more convenient, method began with the pyrolysis of 2,6-bis (chloromethyl)toluene ( 8 ) to give 3-chloromethylbenzocyclobutene ( 9 ). Formation of the Grignard of 9, followed by reaction with ferric chloride, yielded the dimer 10 . Pyrolysis of 10 then gave [2.2.2] (1,2,3)cyclophane (7).     

A new Cu-selective self-assembled fluorescent chemosensor based on thiacalix[4]arene

A new ON–OFF fluorescent chemosensor for Cu²⁺ ions was prepared through self-assembly inside Triton X-100 micelles of p-tert-butylthiacalix[4]arene (TCA) and perylene in water solution. This thiacalix[4]arene-based self-assembled fluorescent chemosensor could realize the direct sensing of Cu²⁺ ions in aqueous solution. Addition of Cu²⁺ ions could result in a quenching of the fluorescence emission of perylene inside the micelles, which is ascribed to intramicellar complex-fluorophore electron-transfer or energy-transfer effects induced by the complexation of TCA with the Cu²⁺ ions. Cu²⁺ ions can be detected selectively in the presence of other metal ions (Zn²⁺, Pb²⁺, Cd²⁺, Mn²⁺, Ni²⁺, Al³⁺, Na⁺, K⁺, Ca²⁺ and Mg²⁺) and its concentration in the submicromolar range can be almost linearly determined according to the fluorescence quenching.     

Action of the new hypolipidemic agent lifibrol (K12.148) on lipid homeostasis in normal rats: Plasma lipids,hepatic sterologenesis,and the fate of injected [14C] acetate

Lifibrol, a new hypocholesterolemic agent with activity in humans, was examined in normal rats for its short-term and long-term effects on lipid homeostasis. Cholesterol (Chol) synthesis inhibition by lifibrol was demonstratedin vitro in liver minces from normal rats by following [1-¹⁴C]acetate ([¹⁴C]Ac) and DL-[2-¹⁴C]mevalonate ([¹⁴C]-MVA) incorporation into [¹⁴C]Chol. When administered at 50 mg/kg/d, lifibrol reduced plasma total Chol and triglycerides (TG) (P<0.001) within 24 h. The Chol reduction was largely a result of reduction of low density and very low density lipoprotein cholesterol (LDL+VLDL-chol) and a smaller decrease in high density lipoprotein cholesterol (HDL-chol). After 10 d, however, a rebound effect emerged, and after 41 d, plasma Chol, LDL+VLDL-chol, and HDL-chol were restored. In contrast, plasma TG remained at reduced levels (P<0.01). The rebound is attributed to counter-regulation of hepatic sterologenesis that was assessed bothex vivo andin vivo. Theex vivo incorporation of [¹⁴C]MVA and [¹⁴C]octanoate into [¹⁴C]Chol and total digitonin-precipitable [¹⁴C]sterols ([¹⁴C]DPS) in liver minces was increased 2-and 6-fold, respectively, in rats treated 6 d at 50 mg/kg. Similarly,in vivo incorporation of intraperitoneally injected [¹⁴C]Ac into hepatic [¹⁴C]DPS (2 h post-injection) was increased 2- to 5-fold at 50 mg/kg, and evidence for increased sterologenesis in nonhepatic tissue was also obtained. The increased hepatic sterologenesis, evident within 48 h, persisted out to 41 d of treatment by which time increases (P<0.002) in hepatic Chol and carcass total sterols were observed. Additionally, incorporation of injected [¹⁴C]Ac into hepatic [¹⁴C]TG was inhibited 60% by lifibrol (P<0.001), and the appearance of [¹⁴C]TG in plasma was reduced. Circulating free [¹⁴C]fatty acids ([¹⁴C]FFA) were also reduced, but hepatic [¹⁴C]FFA synthesis was unaffected, thus suggesting either a lesser release of newly formed FFA from liver or an enhanced removal from plasma.     

Characteristics of Cobalt Adsorption on Prepared TiO2 and Fe-Ti-O Adsorbents in High Temperature Water

Abstract

TiO₂ and Fe-Ti-O adsorbents were prepared by hydrolysis of Ti(OC₃H₇)4 and by alkalizing an equimolar mixed solution of TiCl₄ and FeCl₂, followed by heat treatment of their hydroxides. Their structures were studied by x-ray diffractometry and TG-DTA. The Co²⁺ adsorption characteristics of the adsorbent in high temperature water were investigated in a stirred autoclave. The prepared Fe-Ti-O adsorbent was found to be a stable nonstoichiometric ferrous/ferric titanium oxide with pseudobrookite and rutile structures. The Co²⁺ adsorption capacity of the Fe-Ti-O adsorbent was determined to be larger (0.38 meq Co²⁺/g adsorbent at 280[ddot]C) than that of TiO₂ at high temperature. The enthalpy changes (ΔH[ddot]) of about 34 and 49 kJ·mol^?1 due to the adsorption of Co²⁺ on the TiO₂ and Fe-Ti-O adsorbents, respectively, indicates that the adsorption is endothermic in the experimental temperature range (150–280[ddot]C). It is shown that the specific surface areas of these adsorbents are not dominant factors for Co²⁺ adsorption on oxides at high temperature.     

Investigation of electron-transfer reaction between alkaline hexacyanoferrate(III) and ranitidine hydrochloride – a histamine H2 receptor antagonist,in the presence of homogenous ruthenium(III) catalyst

The ruthenium(III)-catalyzed electron-transfer reaction between hexacyanoferrate(III) and ranitidine hydrochloride is studied in alkaline medium at 25°C and at an ionic strength of 1.10?mol/dm³. The reaction stoichiometry is established and is found to be 1:4, that is, for the oxidation of one mole of ranitidine, four moles of hexacyanoferrate(III) are consumed. The reaction products were characterized by spectral studies such as IR, GC-MS, ¹H-NMR and ¹³C-NMR. The reaction rate shows a less than unit order in substrate and alkali and a first-order dependence in oxidant, [Fe(CN)₆]^3? and the catalyst, ruthenium(III) concentrations. The active species of ruthenium(III), [Ru(H₂O)₅OH]²⁺, forms an intermediate complex with the substrate. The attack of complex by hexacyanoferrate(III) in the rate determining step produces a radical cation, which is further oxidized in the subsequent step to form the oxidation product. The effect of the reaction environment on the rate constant upon adding varying concentrations of KNO₃ and t-butanol was studied. The initially added products did not have any significant effect on the reaction rate. A plausible mechanism is proposed based on the experimental results. The effect of varying temperature on the reaction rate was also studied. The activation parameters for the slow step and the thermodynamic quantities for the equilibrium steps were evaluated.

The mechanism of title reaction has been studied and one mole of ranitidine consumes four moles of [Fe(CN)₆]^3?, as shown in the following equation:     

Radiation-induced graft copolymerization of styrene to cellulose

The radiation-induced graft copolymerization of styrene to cellulose has been studied in vacuo at 30°C and at dose rates from (0.37 to 8.73) × 10^?2 W/kg. Dioxan was used as solvent for monomer and polystyrene homopolymer, and water (2% total volume) was incorporated as swelling agent for cellulose. The concentration of styrene in the bulk medium was varied from 0.432 to 3.46 moles/l., and the rates of both grafting and homopolymerization were shown to be proportional to [monomer] · [intensity]^1/2. The value of 3.3 × 10^?4 l. mole^?1 sec^?1 derived for k_p²/k_t in homopolymerization is similar to that for normal free-radical polymerization of styrene. However, reduced termination during grafting yielded a much higher value (58 l. moles^?1 sec^?1). Degradation of cellulose in the absence of monomer was followed viscometrically, and values of 13.5 and 24.6 were derived for G (scission) in vacuo and in air, respectively.     

Kinetics of ligand exchange reaction of Cu(II)-ammine complex with poly(vinyl alcohol) in aqueous solution

The kinetics of the ligand exchange reaction of the Cu(II)-ammine complex with poly(vinyl alcohol) (PVA) has been studied by a stopped-flow method at pH 9–10, at μ=0.1 (NH₄Cl) and at 25°C. The reaction is initiated by the formation of unstable [Cu(NH₃)₃]²⁺ by the attack of H⁺ on Cu(II)-ammine complex, and proceeds through the mixed complex {[Cu(NH₃)₃(O?PVA)]²⁺}. This step may be rate-determining, followed by a rapid reaction. Finally, the Cu(II) ion is taken up by PVA. The rate is given by d[Cu(II)?PVA]/dt=k[H⁺]{[Cu(NH₃)₄]²⁺}[PVA]/[NH₄Cl], where k=k₁ + k′₂[H⁺], k₁=4.25× 10s^?1 and k′₂=5.20× 10¹¹l mol^?1s^?1.     

EXTRACTION OF ALKALINE EARTH AND ACTINIDE CATIONS BY MIXTURES OF DI(2-ETHYLHEXYL) ALKYLENEDIPHOSPHONIC ACIDS AND NEUTRAL SYNERGISTS

ABSTRACT

The synergistic extraction of alkaline earth (Ca²⁺, Sr²⁺, Ba²⁺ and Ra²⁺) and actinide (Am³⁺, UO₂ ²⁺ and Th⁴⁺) cations from aqueous nitric acid solutions by mixtures of P,P^′-di(2-ethylhexyl) methylene-(H₂DEH[MDP]), ethylene-(H₂DEH[EDP]), and butylene-(H₂DEH[BuDP]) diphosphonic acids and neutral extractants in o-xylene has been investigated. The cis-syn-cis and cis-anti-cis stereoisomers of dicyclohexano-18-crown-6 (DCH18C6), the unsubstituted 21-crown-7 (21C7) and dicyclohexano-21-crown-7 (DCH21C7) were used as neutral synergists of the crown ether type. For Am(III) synergistic effects were also investigated using neutral organophosphorus esters, such as, tri-n-butylphosphate (TBP), diamyl amylphosphonate (DA[AP]) and tri-n-octylphosphine oxide (TOPO) as co-extractants. In all systems investigated, no synergistic extraction enhancement was observed for actinide ions. For the alkaline earth cations, synergistic effects were only observed when mixtures of H₂DEH[EDP] or H₂DEH-[BuDP] with DCH18C6 were used to extract Sr²⁺, Ba²⁺ and Ra²⁺. No synergistic effects were observed for the extraction of alkaline earth cations by H₂DEH[MDP] or for the extraction of Ca²⁺ by any of the diphosphonic acids studied. The synergistic effects obtained with DCH18C6 were significantly higher for the cis-syn-cis than for the cis-anti-cis stereoisomer.     

N-(2-biphenylenyl)-4-[2′-phenylethynyl]phthalimide—new monomer synthesis, cure and thermal properties of resulting high temperature polymer

A synthetic route is described to a new monomer, N-(2-biphenylenyl)-4-[2′-phenylethynyl]phthalimide (BPP), which contains both phenylethynyl and biphenylene reactive functional groups. The monomer can be made either from N-(2-biphenylene)acetamide or 2-aminobiphenylene, by reaction with the phenylethynyl-containing anhydride. The monomer was characterised fully and the thermal cure of the material was studied by infrared (IR) spectroscopy and differential scanning calorimetry (DSC). The IR spectra showed that the phenylethynyl group reacted completely within 1 h at 370 °C. DSC showed the polymerisation exotherm of BPP centred at 379 °C, lower than two NASA-developed phenylethynyl-terminated imide (PETI) resins. In comparison with the PETI systems, the T_g of cured BPP was ca. 100 °C higher, making it a candidate for possible high temperature applications.     

Polyoxometalate-cucurbituril molecular solid as photocatalyst for dye degradation under visible light

An organic-inorganic hybrid molecular solid based on Lindqvist-type polyoxometalate (POM) anions, {W₆O₁₉}^2 −, and decamethylcucurbit[5]uril (Me₁₀CB[5]) was synthesized under hydrothermal condition. In the structure of {[Na₂(W₆O₁₉)(Me₁₀CB[5])(H₂O)]·2H₂O}_n (complex 1), the sodium cations, {W₆O₁₉}^2 − anions, and Me₁₀CB[5] macrocycles formed a 1D chain subunit that assembled into a 3D supramolecular host-guest network through extensive supramolecular interactions. Furthermore, the complex displayed enhanced photocatalytic activity towards the degradation of rhodamine B (RhB) in water under visible light irradiation.     

Catalytic Reduction of 4-Nitrobenzoic Acid by cis-[Rh(CO)2(Amine)2](PF6) Complexes Under Water–Gas Shift Reaction Conditions: Kinetics Study

Rhodium(I) complexes of the type, cis-[Rh(CO)₂(amine)₂](PF₆) where (amine = 3-picoline, 2-picoline, pyridine, 2,6-lutidina or 3,5-lutidine) dissolved in 80% aqueous amine solutions catalyzed the selective reduction of 4-nitrobenzoic acid to 4-aminobenzoic acid under CO atmosphere. The importance of these catalytic systems is their high chemo selectivity for the aromatic nitro group of the 4-nitrobenzoic acid with respect to the carboxylic group, allowing the production of the desired aromatic amine in high yields. The 4-aminobenzoic acid production depends on the nature of the coordinated amine. The Rh/3,5-lutidine system, the most active catalyst among tested, displays turnover frequencies for 4-aminobenzoic acid production of about 173 moles per mole Rh per day for [Rh] = 1 × 10^?4 mol, [4-nitrobenzoic acid] = 3.82 × 10^?3mol, 10 mL of 80% aqueous 3,5-lutidine, P(CO) = 0.9 atm at 100 °C. Analyses of kinetic results for the Rh/3,5-lutidine system show a first order dependence on 4-nitrobenzoic acid concentration, a non-linear dependence on CO pressure, a segmented Arrhenius plot and dependence on the nature of the reducing gas agent. These data are discussed in terms of a possible mechanism.     

Solvent Extraction Separation of Trivalent Americium from Curium and the Lanthanides

The sterically constrained, macrocyclic, aqueous soluble ligand N,N′-bis[(6-carboxy-2-pyridyl)methyl]-1,10-diaza-18-crown-6 (H₂BP18C6) was investigated for separating americium from curium and all the lanthanides by solvent extraction. Pairing H₂BP18C6, which favors complexation of larger f-element cations, with acidic organophosphorus extractants that favor extraction of smaller f-element cations, such as bis-(2-ethylhexyl)phosphoric acid (HDEHP) or (2-ethylhexyl)phosphonic acid mono(2-ethylhexyl) ester (HEH[EHP]), created solvent extraction systems with good Cm/Am selectivity, excellent trans-lanthanide selectivity (K_ex,Lu/K_ex,La = 10⁸), but poor selectivity for Am against the lightest lanthanides. However, using an organic phase containing both a neutral extractant, N,N,N’,N’-tetra(2-ethylhexyl)diglycolamide (TEHDGA), and HEH[EHP] enabled rejection of the lightest lanthanides during loading of the organic phase from aqueous nitric acid, eliminating their interference in the americium stripping stages. In addition, although it is a macrocyclic ligand, H₂BP18C6 does not significantly impede the mass transfer kinetics of the HDEHP solvent extraction system.     

Solvent extraction of zirconium(IV) from acidic chloride solutions using the thiosubstituted organophosphorus acids Cyanex 301 and 302

Solvent extraction of zirconium(IV) from acidic chloride solutions has been carried out with the thiosubstituted organophosphorus acids Cyanex 301 and Cyanex 302. The extraction follows an ion exchange mechanism: MO²⁺_(aq) + 2 HA_(org) ? MOA_2(org) + 2 H⁺_(aq), where, M = Zr(IV); HA = Cyanex 301 or Cyanex 302. The plots of log D (distribution ratio) vs log [HA], are linear with slopes of 2, indicating the association of two moles of extractant with the extracted metal species. The plots of log D vs log [H⁺] gave straight lines with a negative slope of 1.7 for Cyanex 301 and 1.8 for Cyanex 302, indicating the exchange of two moles of hydrogen ions for every mole of Zr(IV). Addition of sodium salts enhanced the extraction of metal. The stripping behavior of metal from the loaded organic (LO) with HCl and H₂SO₄ was studied. Increase of temperature during the extraction and the stripping stage increases the metal transfer, showing the process is exothermic. Mixed extractants, the extraction behavior of associated elements such as Hf(IV), Ti(IV), Al(III), Fe(III) and the IR spectra of the metal complexes were studied. Copyright © 2004 Society of Chemical Industry     

Modulation of phorbol ester-associated events in epidermal cells by linoleate and arachidonate

To elucidate the events elicited by the skin tumor promotor 12-O-tetradecanoylphorbol-13-acetate (TPA), which are modulated by linoleic acid (LA) and arachidonic acid (AA), the activity of these fatty acids in cultured mouse epidermal cells was compared. Approximately 94% of either exogenous radiolabelled fatty acid was incorporated into the total phospholipid pool over 15 h. The relative distribution among the phospholipid classes differed, however, such that approximately 70% of phospholipid-associated [¹⁴C]-LA was found in phosphatidylcholine, compared to approximately 30% for [¹⁴C]AA. Phosphatidylethanolamine and phosphatidylinositol/phosphatidylserine contained 17 and 13% of the phospholipid [¹⁴C]LA, and 34 and 30% of [¹⁴C]AA, respectively. Prostaglandin (PG) E₂ production was low but similar in unstimulated cultures prelabelled with either [¹⁴C]LA or [¹⁴C]AA. However, in cultures treated with TPA (1.6 μM), [¹⁴C]AA-prelabelling resulted in approximately three times the amount of [¹⁴C]PGE₂ compared with cultures prelabelled with [¹⁴C]LA. Cultured cells were found to contain significant δ6 desaturase activity, which may enable conversion of LA to AA, and thus may account for the observed PGE₂ production from [¹⁴C]LA treated cells. AA-Supplemented (1.6 μM) cultures supported approximately twice the induction of ornithine decarboxylase activity by TPA compared with cultures treated with 1.8 μM LA. Activation of partially purified protein kinase C was similar for either fatty acid tested over a 10–300 μM dose range. Overall, the results suggest that LA does not have the same biological activity as AA with regard to several TPA-associated events known to be important in skin tumor promotion. This reduced biological activity of LA may be partly responsible for the known inhibition of mouse skin tumor promotion by high dietary levels of LA [Leyton, J., Lee, M.L., Locniskar, M.F., Belury, M.A., Slaga, T.J., Bechtel, D., and Fischer, S.M. (1991)Cancer Res. 51, 907–915].     

Synthesis,Characterization, and Antimicrobial Activity of Silver(I) and Copper(II) Complexes of Phosphate Derivatives of Pyridine And Benzimidazole

Two silver(I) complexes—{[Ag(4‐pmOpe)]NO₃}_n and [Ag(2‐bimOpe)₂]NO₃—and three copper(II) complexes—[Cu₄Cl₆O(2‐bimOpe)₄], [CuCl₂(4‐pmOpe)₂], and [CuCl₂(2‐bis(pm)Ope]—were synthesized by reaction of silver(I) nitrate or copper(II) chloride with phosphate derivatives of pyridine and benzimidazole, namely diethyl (pyridin‐4‐ylmethyl)phosphate (4‐pmOpe), 1H‐benzimidazol‐2‐ylmethyl diethyl phosphate (2‐bimOpe), and ethyl bis(pyridin‐2‐ylmethyl)phosphate (2‐bis(pm)Ope). These compounds were characterized by ¹H, ¹³C, and ³¹P NMR as well as IR spectroscopy, elemental analysis, and ESIMS spectrometry. Additionally, molecular and crystal structures of {[Ag(4‐pmOpe)]NO₃}_n and [Cu₄Cl₆O(2‐bimOpe)₄] were determined by single‐crystal X‐ray diffraction analysis. The antimicrobial profiles of synthesized complexes and free ligands against test organisms from the ATCC and clinical sources were determined. Silver(I) complexes showed good antimicrobial activities against Candida albicans strains (MIC values of ～19 μM ). [Ag(2‐bimOpe)₂]NO₃ was particularly active against Pseudomonas aeruginosa and methicillin‐resistant Staphylococcus epidermidis, with MIC values of ～5 and ～10 μM , respectively. Neither copper(II) complexes nor the free ligands inhibited the growth of test organisms at concentrations below 500 μg mL^?1.