花粉症诱因探究

花粉症又称季节性鼻炎或枯草热,是敏感个体对花粉的一种超敏反应.在美国,每一百个人当中就有两个以上的人患花粉症;现在日本有1300万人饱受花粉症折磨,超过总人口的10%[1].我国的发病率为0.5%～1%,高发区达到5%,虽没有上述一些国家那么严重,受害者亦相当可观.全世界花粉症发病人数到1999年就已有5000多万[2],可见花粉症患者是一个绝不可轻视的群体.图1显示了花粉过敏症的发病机制.     

吉安散装人抗冰战雪保平安——江西吉安散办干部职工铲除冰保畅通纪实

春节前后,吉安市遭遇到罕见的冰冻雨雪灾害天气,连续出现了低温、阴雨和雨夹雪,成为全省灾情最严重地区之一.特别是1月25日以后,出现了持续大范围的雨雪冰冻天气.冰冻损坏了市区的电网,压垮了树枝,封锁了道路和桥梁.     

2010～2011年世界塑料工业进展

收集了2010年7月～2011年6月世界塑料工业的相关资料,介绍了2010～2011年世界塑料工业的发展情况,提供了世界塑料产量、消费量及全球各类树脂的需求量及产能情况。按通用热塑性树脂(聚乙烯、聚丙烯、聚氯乙烯、聚苯乙烯、ABS树脂),工程塑料(尼龙、聚碳酸酯、聚甲醛、热塑性聚酯、聚苯醚),特种工程塑料(聚苯硫醚、液晶聚合物、聚醚醚酮),通用热固性树脂(酚醛、不饱和聚酯树脂、环氧树脂、聚氨酯)不同品种的顺序,对树脂的产量、消费量、供需状况及合成工艺、产品应用开发、树脂品种的延伸及应用的进一步扩展等技术作了详细介绍。     

欧文斯科宁专访

欧文斯科宁公司(以下简称OC)创建66年来一直致力于开发玻璃纤维的新用途,是建筑材料和复合材料行业的领先创新者和制造商,OC进入亚太市场也已超过30年,长久以来他们专注于推广复合材料的应用领域以及扩大其供应基地.最近,欧文斯科宁在印度扩充了生产能力,并在上海设立了技术中心.至今为止,欧文斯科宁在亚太区已有超过1800名员工,从事建筑材料和复合材料的生产,销售和研发工作.     

酿酒酵母细胞表达异源萜类化合物的研究进展

萜类化合物具有可观的经济价值,但是目前的生产过程复杂、产量低。酿酒酵母甲羟戊酸途径为萜类化合物的合成提供直接前体,因此酿酒酵母细胞具有合成异源萜类化合物的天然优势。对酿酒酵母甲羟戊酸途径的清晰认识是对其进行有效利用的基础,本文从代谢途径、关键酶的特点和全局调控机制3个方面对该途径进行了介绍。从代谢途径的构建和优化、模块与底盘细胞的适配、模块构建及组装方式的角度概述了酿酒酵母细胞异源合成单萜、倍半烯萜、二萜、三萜类化合物的研究进展。指出实现酿酒酵母高效合成萜类化合物所需要解决的基础问题是对酿酒酵母甲羟戊酸途径进行更为全面了解和对萜类化合物的天然代谢途径进行明确解析;另外,合成生物学的进一步发展也将为此提供应用基础。     

喷涂前处理污染源的分析及其处理措施

随着我国国民经济的快速发展和国家"节能减排"重点项目的深入开展,各种污染源的分析及其处理措施的研究备受关注.本文在充分研究若干家电企业的钢铁喷涂制件的前处理工艺(如:预脱脂、脱脂、清洗、表调、磷化等)的基础上,分析喷涂前处理过程中的污染源,研究污染源的处理措施.     

回转窑耐火砖的砌筑及使用

我公司回转窑规格为Φ4.0m×60m.窑内使用的耐火砖为镁铬砖、隔热尖晶石、蓝晶石和黏土砖以及硅莫砖.镁铬砖规格为(81×90×150×200)mm,其它耐火砖规格皆为(81×90×200×200)mm.尽管每个品种的砖品质相同,但由于在镶砌和使用过程中方法不同,寿命有长有短.通过多年实践,现总结如下.     

硅酸钠缓蚀剂的研究现状与展望

硅酸盐资源丰富,无毒,价廉,不繁殖细菌,是一种对环境友好的缓蚀剂.近年来研究的以硅酸盐为主的缓蚀剂复合配方,大大提高了硅酸盐缓蚀剂的应用范围.目前,开发缓蚀剂复合配方已成为一种发展趋势.本文综述了硅酸钠缓蚀剂的应用现状,并对其发展作了展望.     

论啤酒瓶质量与啤酒灌装的协调和统一

为了使啤酒瓶质量与啤酒灌装质量协调统一,探讨了啤酒瓶外形设计、剩余空间和瓶壁厚度与瓶子强度和灌装质量的关系,提出啤酒瓶企业定点向啤酒企业供瓶,两企业协作互动,了解相关的技术、设备性能和工艺流程,以利同步发展.     

化妆品行业如何应对REACH法规

2006年12月7日～2006年12月8日化妆品化学家年会在美国纽约举行,该年会为化学品供应商提供了参与REACH法规的机会.REACH法规的实施引起了业界的广泛关注,来自世界各地的著名化学品及化妆品公司对REACH法规的实施所带来的一些问题,以及新原料、新技术进行了交流.会议主要对就REACH法规、制造及规模化和神经美容品等方面展开了研讨.     

可编程控制器编程技巧

PLC软件编制思路及方法为：理解工程图纸中各种原理图；熟悉工艺流程，编写逻辑框图，软件重点应用考虑故障；以“点”带“面”进行编程；程序调试。     

绿色环保意识的趋向

随着消费者环保意识的提高,人们除了认清绿色环保能对社会和全世界起到巨大的促进作用,还认为绿色环保能够直接、积极地反映其社会地位,在某种程度上反映出消费者自己的绿色环保意识。介绍了消费者对"绿色化"的认识,对"绿色产品"的期望以及生产厂家对"绿色原料"的认证和对"可持续发展"所做的贡献。     

Adhesives in construction: A contractor's viewpoint

The development of epoxy- and polyester-based adhesives has dramatically widened the scope of adhesive bonding in the civil engineering industry but the technology of the adhesives used has often been more appropriate to the workshop than to the construction site. There is a need for the suppliers of structural adhesives to recognize this and to develop compositions and application techniques more amenable to site use. It is equally necessary for the construction industry to make more effort to understand these materials, to take advantage of their outstanding properties, and hence to use them successfully for the construction and repair of concrete structures.     

Long-term residual value of North Carolina and Queensland rock phosphates compared with triple superphosphate

The effectiveness of large single applications of North Carolina reactive rock phosphate, Queensland non-reactive rock phosphate, and Calciphos, were compared to the effectiveness of superphosphate in field experiments in south-western Australia for up to 11 years after application. As measured using plant yield, superphosphate was the most effective fertilizer in the year of application, and relative to freshly-applied superphosphate, the effectiveness of the superphosphate residues declined to be about 15 to 65% as effective in the year after application, and 5 to 20% as effective 9 to 10 years after application. Relative to freshly-applied superphosphate, all the rock phosphates were 10 to 30% as effective in the year of application, and the residues remained 2 to 20% as effective in the 10 years after application. The bicarbonate soil test reagent predicted a more gradual decrease in effectiveness of superphosphate of up to 70% 10 years after application. For rock phosphate, the reagent predicted effectiveness to be always lower than for superphosphate, being initially 2 to 11% as effective in the year after application, and from 10% to equally as effective 10 years later. Therefore rock phosphates are unlikely to be economic alternatives to superphosphate in the short or long term on most lateritic soils in south-western Australia.     

东濮凹陷滚动勘探开发实践——东濮环洼

以层序地层学理论为基础,提出应用坡折带理论寻找陆相湖盆斜坡带油气藏的方法。通过东濮凹陷的中央隆起带北部濮卫环洼带滚动勘探开发实例,分析和总结构造坡折带成因机制、特点和构造样式。提出坡折带圈闭条件好,储层发育,是环洼聚油气条件最有利地区;沿着坡折带延伸方向砂体发育程度变差,储量丰度相继降低;高台阶油气充满程度最高。通过“十.五”期间的实践发现并动用了一批储量,取得了较好的滚动勘探开发效果。     

Prediction of gas flow directions in gas assisted injection molding when cavities and runners are involved

In the prediction of gas flow-direction for gas-assisted injection molding (GAIM), the statement“Gas goes to the direction of the last area to fill with resin”, has been accepted as a correct one. When there exists more than one area to fill with resin, a mold design engineer for GAIM technologies has to determine to which direction gas goes that commercial software for GAIM (e.g., Moldflow) may be utilized for its mold design. However commercial software is generally expensive and is sometimes hard to become familiar with. As a rule of thumb, it is suggested that the resistance to the initial velocity of melt polymer at the nearest geometry to a gas injection point should be used as its criterion since gas goes in the direction of least resistance to initial resin-velocity. Neither the flow rate nor the resistance to flow rate can be a criterion in the prediction. Thus the statement“Gas goes to the direction of the least resistance to flow rates”, should be corrected to“More flow rate goes to the direction of the least resistance to flow rates.”, The rule of thumb suggested in this paper was verified by using commercial software, Moldflow, in the prediction of gas flow directions in GAIM under geometries where cavities and runners were involved. When the ratio of initial resin-velocity is so close to unity it is proposed as the adapted rule of thumb to calculate new emerging resin-velocities and resistances to resin-velocity at the first coming change of diameters in series of pipes and to compare those for upper and lower sides each other to predict the gas direction. Thus the judgment as to which point is the point where gas starts to choose a preferred direction is very important in the prediction.     

Consolidation of sand formation using freon'll gas hydrate

Freon 11 gas hydrate was used to block the pores of four size ranges of sand from 24 mesh to 60 mesh. A 50.8 mm deep bed of sand when thus “frozen” with hydrate could sustain a dfferential water pressure of at least 6895 kPa. A subcooling of about 5 to 6°C below its thermodynamic formation temperature was required to cause the hydrate to form such a plug. Once formed, the hydrate remained stable at temperatures up to its decomposition temperature. The time required for the hydrate crystal to grow to a size large enough to block the pores of the bed was about two hours. The amount of hydrate forming agent required to block the sand pores was found to be approximately that calculated from the ideal composition of the hydrate.     

The notch sensitivity of polymeric materials

Stress–strain tests were made on about five dozen polymeric materials using unnotched and notched specimens containing six different types of notches. Notches decrease the strength, but they decrease the elongation to break even more drastically in general. Notch sensitivity factors are defined for strength and for energy to fracture in such a manner that the greater the notch sensitivity factor, the greater is the effect of a notch relative to the unnotched material. The notch sensitivity factor for breaking (or yield) strength is not the same as the notch sensitivity factor for energy to fracture as measured by the area under the stress–strain curve. Brittle polymers and composites tend to have greater notch sensitivity factors for strength than ductile polymers. For brittle polymers, the notch sensitivity factor for energy to fracture tends to increase with the elongation to break of the unnotched polymer. Notches generally are more detrimental to ductile polymers than to brittle ones as far as the energy to fracture is concerned. For ductile polymers, the shape of the stress–strain curve is important in determining the sensitivity to notches. The ratio of the upper to lower yield strengths should be small for low notch sensitivity. It is desirable to have the breaking strength greater than the yield strength. Glass fibers and filler in ductile matrices increase the notch sensitivity for strength but decrease the sensitivity for energy to fracture relative to the unfilled polymer. Rubber–filled polymers have a reduced notch sensitivity for strength relative to the unfilled polymer, but the notch sensitivity for energy to fracture may be either increased or decreased, depending upon the system. The energy to fracture for notched specimens correlates better with Izod impact strength than does the energy to fracture for unnotched specimens. It is recommended that notched stress–strain specimens be routinely measured along with unnotched specimens.     

Ultrasonically initiated free radical‐catalyzed emulsion polymerization of methyl methacrylate (i)

The emulsion polymerization of methyl methacrylate initiated by ultrasound has been studied at ambient temperature using sodium lauryl sulfate as the surfactant. The investigation includes the: (1) nature and source of the free radical for the initiation process; (2) effects of different types of cavitation; and (3) dependence of the polymerization rate, polymer particle number generated, and the polymer molecular weight on acoustic intensity, argon gas flow rate, surfactant concentration, and initial monomer concentration. It was found that the polymerization could be initiated by ultrasound in the emulsion systems containing methyl methacrylate, water, and sodium lauryl sulfate at ambient temperature in the absence of a conventional initiator. The source of the free radical for the initiation process was found to come from the degradation of the sodium lauryl sulfate, presumably in the aqueous phase. The weight average molecular weight of the poly(methyl methacrylate) obtained varied from 2,500,000 to 3,500,000 g mol⁻¹, and the conversion for polymerization was up to 70%. Deviations from the Smith–Ewart kinetics were observed. The polymerization rate was found to be proportional to the acoustic intensity to the 0.98 power; to the argon gas flow rate to the 0.086 power; to the surfactant concentration to the 0.08 power, with the 0.035M–0.139M surfactant concentration range; and to the surfactant concentration to the 0.58 power, with the 0.139M–0.243M surfactant concentration range. The polymerization rate was found to increase with increasing initial monomer concentration up to a point where it became independent of initial monomer concentration. The polymer particle number generated per milliliter of water was found to be proportional to the acoustic intensity to the 1.23 power; to the argon gas flow rate to the 0.16 power; to the surfactant concentration to the 0.3 power, with the 0.035M–0.139M surfactant concentration range; and to the surfactant concentration to the 1.87 power, with the 0.139M–0.243M surfactant concentration range. The polymer weight average molecular weight was found to be proportional to the acoustic intensity to the 0.21 power, and to the argon gas flow rate to the 0.02 power. It was found to be inversely proportional to the surfactant concentration to the 0.12 and 0.34 power, with the 0.035M–0.139M and the 0.139M–0.243M surfactant concentration ranges, respectively. The polymer yield and polymerization rate were found to be much larger than those obtained from an ultrasonically initiated bulk polymerization method. The polymerization rates obtained at ambient temperature were found to be similar to or higher than those obtained from the conventional higher temperature thermal emulsion polymerization method. This investigation demonstrated the capability of ultrasound to both initiate and accelerate polymerization in the emulsion system, and to do this at a lower temperature that could offer substantial energy savings. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 72: 797–825, 1999     

Role of Interfacial Debonding and Matrix Cracking in the Effective Thermal Diffusivity of Alumina-Fiber-Reinforced Chemical-Vapor-Infiltrated Silicon Carbide Matrix Composites

The thermal diffusivity of a biaxial weave alumina-fiberreinforced chemical-vapor-deposited (CVD) SiC composite heated to 1500°C, which is above the manufacturing temperature, was found to exhibit an increase for heat flow parallel to the fiber plane, whereas a decrease was observed perpendicular to the fiber plane. The increase parallel to the fiber plane was thought to be due to the annealing of the fibers and matrix. The decrease perpendicular to the fiber plane was found to be the result of interfacial debonding and matrix cracking within the plane of the fibers.