Development of a High-k Pr $_{2}$O $_{3}$ Sensing Membrane for pH-ISFET Application

In order to develop a pH sensor having a good pH-sensing characteristic, electrolyte-insulator-semiconductor capacitors using a high-k Pr$_{2}$O$_{3}$ thin film as the sensing membrane were fabricated on silicon substrates by reactive radio frequency sputtering. The structural and morphological features of these films with annealing at various temperatures were studied by X-ray diffraction, atomic force microscopy, and X-ray photoelectron spectroscopy. The Pr$_{2}$O $_{3}$ sensing film after annealing at 900$;^{circ}$C is suggested to the increase in the interfacial SiO $_{2}$ and silicate formation, and the high surface roughness. Therefore, a physical vapor deposition Pr$_{2}$O $_{3}$ film is adopted as a new pH-sensing layer. The result produces a pH response of 52.9 mV/pH $({rm pH}=2hbox{--}12)$, a hysteresis voltage of 17.5 mV $({rm pH}=7 to 4 to 7to 10 to 7)$, and a drift rate of 2.15 mV/h (${rm pH}=7$ buffer solution).      

Structure and Magnetic Properties of Sn$_{1 - {rm x}}$ Co$_{rm x}$ O$_{2}$ Powder and Film

We have studied room-temperature ferromagnetism (RTFM) in Sn$_{1 - {rm x}}$Co$_{rm x}$O$_{2}$ powders and films fabricated by the sol-gel method. Our X-ray diffraction, high-resolution transmission microscopy, and X-ray photoelectron spectroscopy results show that all the samples have a pure rutile structure, and Co ions have a chemical valence of 2+. In addition, the magnetic moment per Co ion drops rapidly with the increase of Co content. Interestingly, Sn $_{1 - {rm x}}$Co $_{rm x}$O $_{2}$ films spin-coated on a Si (111) substrate have much larger magnetic moment than powder samples, because film samples have larger domain volumes, which may induce stronger long-range magnetic exchange coupling.      

Thermal Diffusivity and Related Properties of Colossal Magnetoresistive La$_{0.67}$Ca$_{0.33}$MnO $_{3}$ With Various Grain Sizes

Using the open-cell photoacoustic technique, we have measured the room-temperature thermal diffusivities of the colossal magnetoresistive material La$_{0.67}$Ca$_{0.33}$MnO$_{3 }$, sintered between 1100$;^{circ}$ C and 1350$;^{circ}$ C, with average grain sizes 1, 3, 5, and 10 $mu$m. We obtained the thermal diffusivities by analyzing the phase of photoacoustic signals in thermally thick samples using Calderon's method. We found that the insulator-metal transition temperature does not depend on the grain size ($T_{rm IM} sim 272$ K). However, the thermal diffusivity increases with grain size, with values between 0.431 and 0.969 mm $^{2}$s $^{-1}$. Other related electrical and thermal properties, including the electrical conductivity, thermal conductivity, and phonon mean free path, are also dependent on the grain size. The electronic contribution to the thermal conductivity is 2%–3% of the total thermal conductivity for smaller grain sizes (1–5 $mu$m) and increases to about 24% when the grain size is increased to 10 $mu$ m.      

Fabrication and Application of Ruthenium-Doped Titanium Dioxide Films as Electrode Material for Ion-Sensitive Extended-Gate FETs

A novel ruthenium-doped titanium dioxide (TiO $_{2}$: Ru) film for pH detection is based on an ion-sensitive extended gate field effect transistor (ISEGFET) sensor. For the preparation of the TiO$_{2}$ : Ru sensing film, a specific processing for metal modification of TiO$_{2}$ thin film is deposited by a co-sputtering system. After thermal annealing treatment, material analysis of the sensing layer is measured by SEM, Hall measurement system and electrical detection system. The average sensitivity of TiO$_{2}$: Ru for hydrogen ion detection is about 55.20 mV/pH (concentration range between pH1 and pH13). The effect of long-term drift for TiO$_{2}$ : Ru ISEGFET-based sensor is presented. Drift rate of the sensor for pH is 0.745 mV/h for 12 h. In order to prepare the calcium ion sensor, the sensing membrane of polymer materials is based on TiO $_{2}$: Ru ISEGFET-based sensor by physical adsorption. The average sensitivity of the calcium ion sensor in the concentration ranging between 1 M and 1$,times,$ 10$^{-3}$ M CaCl$_{2}$ is about 29.65 mV/pCa.      

Comparison of Alternative Techniques for Characterizing Magnetostriction and Inverse Magnetostriction in Magnetic Thin Films

We compare the direct and inverse techniques of measuring magnetostriction in magnetic thin films. We chose a set of four magnetic thin film samples (Co$_{95}$Fe$_5$, Co$_{60}$Fe$_{20}$B$_{20}$, Ni$_{65}$Fe$_{15}$Co$_{20}$, and Ni$_{80}$Fe$_{20}$) for the measurements, representing positive and negative magnetostriction and having saturation magnetostriction of magnitudes ranging from $10^{-7}$ to $10^{-5}$. We made the direct measurements on a high-precision optical cantilever beam system, and we carried out the inverse magnetostriction measurements on a nondestructive inductive $Bhbox{-}H$ looper with three-point bending stage.      

Effects of Post-Deposition Annealing and Oxygen Content on the Structural and pH-Sensitive Properties of Thin Nd $_{2}$O $_{3}$ Films

This paper describes the structural properties and sensing characteristics of thin Nd$_{2}$O$_{3}$ sensing membranes deposited on silicon substrates by means of reactive sputtering. X-ray diffraction, X-ray photoelectron spectroscopy, and atomic-force microscopy were used to study the chemical and morphological features of these films as functions of the growth conditions (argon-to-oxygen flow ratios of $20/5, 15/10$ and $10/15$; temperatures ranging from 600$~^{circ}$C to 800$~^{circ}$C). The thin Nd$_{2}$O$_{3}$ electrolyte-insulator-semiconductor devices prepared under a 15/10 flow ratio with subsequent annealing at 700$~^{circ}$C exhibited a higher sensitivity (56.01 mV/pH, in the solutions from pH 2 to 12), a smaller hysteresis voltage (4.7 mV in the pH loop $7 to 4 to 7to 10 to 7$), and a lower drift rate (0.41 mV/h in the pH 7 buffer solution) than did those prepared at the other conditions. We attribute this behavior to the optimal oxygen content in this oxide film forming a high density of binding sites and a small surface roughness.      

Domain Structure in (NiFe/Au/Co/Au)$_{10}$ Multilayers With Perpendicular Anisotropy of Co Layers

Results of domain structures observation of individual Ni $_{80}$Fe $_{20}$ and Co sublayers in sputter deposited (NiFe/Au/Co/Au)$_{10}$ multilayers, using an element-sensitive method: the photoemission electron microscopy combined with soft X-ray magnetic circular dichroism, are presented. Also, overall domain structures were studied with magnetic force microscopy. The studies allowed us to reveal submicron stripe domains in the investigated samples and the replication of the stripe domains from the Co layers with perpendicular anisotropy to the NiFe layers with easy-plane anisotropy.      

Room-Temperature Ferromagnetic Property in MnTe Semiconductor Thin Film Grown by Molecular Beam Epitaxy

MnTe layers of high crystalline quality were successfully grown on Si(111) and Al$_{2}$O$_{3}$(0001) substrates by molecular beam epitaxy. We have investigated the structure, magnetic and electric transport properties of MnTe layers by using X-ray diffraction (XRD), superconducting quantum interference device (SQUID) magnetometer, physical properties measurement system (PPMS), and X-ray photoelectron spectroscopy (XPS). Characterization of MnTe layers on Si(111) and Al $_{2}$O $_{3}$(0001) substrates by X-ray diffraction (XRD) revealed a hexagonal structure of polycrystalline growth for MnTe/Si(111) and epitaxial growth for MnTe/Al$_{2}$ O$_{3}$ (0001), respectively. Investigation of magnetic properties for MnTe layers showed ferromagnetic properties above room temperature unlike antiferromagnetic bulk MnTe materials. The great irreversibility between zero-field-cooling and field-cooling magnetization were observed. Apparent ferromagnetic hysteresis loops are measured at room temperature. In electro-transport measurements, the temperature dependence of resistivity revealed a noticeable semiconducting behaviors and showed a conduction via variable range hopping (VRH) at low temperature. From XPS results, we assume that the origin of ferromagnetism in samples may be due to the breaking of superexchange antiferromagnetic correlations between Mn spin moments arising from Tellurium vacancies.      

Correlation Between the Degradation of Perpendicular Anisotropy and the Double Hysteresis Behavior in [Pd/Co]$_{rm n}$/FeMn Exchange Biased Thin Films

We clearly detected double hysteresis by increasing Co layer thickness and decreasing the number of bilayers in perpendicular exchange biased [Pd(0.6)/Co$(t)$] $_{rm n}$/FeMn(11.6 nm) thin films. In-plane tensile stress calculations confirmed that the appearance of double hysteresis is closely related to the degradation of stress-induced perpendicular anisotropy in the [Pd/Co] multilayers. Furthermore, annealing at the magnetic field applied perpendicular to the film plane directly verified that the enhancement of thermally induced perpendicular anisotropy, $K_{rm eff-induced}$, in the [Pd/Co] multilayers is the main physical reason for removal of the double hysteresis. All our experimental and theoretical results demonstrated that perpendicular anisotropy is the dominant factor in controlling the double hysteresis behavior of perpendicularly magnetized [Pd/Co]$_{rm n}$/FeMn exchange biased thin films.      

Magnetoresistance and Magnetic Anisotropy Properties of Strain-Induced Co/Ag Multilayer Films

We report on the magnetoresistance (MR) properties of [Co(tCo)/Ag 1.5 nm]$_{20}$ multilayer and alloy films grown with the pulse electrochemical deposition on a polyamide substrate (1 cm$^{2}$ ). The induced uniaxial magnetic anisotropy was observed due to the effect of strain in all the multilayer films. The multilayer [Co 1.5 nm/Ag 1.5 nm]$_{20}$ showed a minimum hysteresis loss. The maximum MR ratio for Co/Ag was 9.2% at 1 kOe. A remarkable difference of magnetic field dependence of the magnetoresistance ratio was observed, corresponding to the orientation of magnetization curves.      

Bit Storage by 360 $^{circ}$ Domain Walls in Ferromagnetic Nanorings

We propose a theoretical design for a magnetic memory cell, based on thin-film ferromagnetic nanorings, that can efficiently store, record, and read out information. An information bit is represented by the polarity of a stable 360$^{circ}$ domain wall introduced into the ring. Switching between the two magnetization states is done by a current applied to a wire passing through the ring, whereby the 360$^{circ}$ domain wall splits into two charged 180 $^{circ}$ walls, which then move to the opposite extreme of the ring to recombine into a 360 $^{circ}$ wall of the opposite polarity.      

Novel Carbon Dioxide Microsensor Based on Tin Oxide Nanomaterial Doped With Copper Oxide

Carbon dioxide $({rm CO}_{2})$ is one of the major indicators of fire and therefore its measurement is very important for low-false-alarm fire detection and emissions monitoring. However, only a limited number of ${rm CO}_{2}$ sensing materials exist due to the high chemical stability of ${rm CO}_{2}$. In this work, a novel ${rm CO}_{2}$ microsensor based on nanocrystalline tin oxide $({rm SnO}_{2})$ doped with copper oxide (CuO) has been successfully demonstrated. The ${rm CuO}hbox{-}{rm SnO}_{2}$ based ${rm CO}_{2}$ microsensors are fabricated by means of microelectromechanical systems technology and sol-gel nanomaterial-synthesis processes. At a doping level of ${rm CuO}:{rm SnO}_{2} =1:8$ (molar ratio), the resistance of the sensor has a linear response to ${rm CO}_{2}$ concentrations for the range of 1% to 4% ${rm CO}_{2}$ in air at 450$^{circ}{rm C}$. This approach has demonstrated the use of ${rm SnO}_{2}$, typically used for the detection of reducing gases, in the detection of an oxidizing gas.      

High Permeability and Low Loss Ni–Fe Composite Material for High-Frequency Applications

A magnetic material with high permeability and low loss characteristics at high frequency is required for miniaturizing electronic components such as antennas. The key factors to keeping low magnetic loss are a high magnetic resonance frequency and the suppression of the eddy currents. We have fabricated a low-loss magnetic composite material by dispersing Ni $_{78}$Fe $_{22}$ (permalloy) fine flakes in polymers; the thickness of the flakes was less than skin depth. The magnetic loss decreased with increased stirring time, and the minimum value occurred when the agglomerated particles decreased and most of the particles were deformed into flakes. Moreover, Zn$_{5}$Ni$_{75}$Fe$_{20}$ composite material indicated high permeability when the flakes were oriented in the direction of sheets. The effect of wavelength shortening by permeability enhancement and the low loss characteristic were confirmed by experimental results of a rod antenna loaded with the developed magnetic composite material.      

Effect of Interface Roughness on Magnetoresistance and Magnetization Switching in Double-Barrier Magnetic Tunnel Junction

The three kinds of double-barrier magnetic tunnel junction (DMTJ) with or without amorphous ferromagnetic Co$_{70.5}$ Fe$_{4.5}$ Si$_{15}$ B$_{10}$ (in at. %) free-layer were investigated to understand the effect of the free-layer on the bias voltage dependence of tunneling magnetoresistance (TMR) ratio. The DMTJ structure consisted of Ta 45/Ru 9.5/IrMn 10/CoFe 7/AlO$_{rm x}$/free-layer 7/AlO$_{rm x}$/CoFe 7/IrMn 10/Ru 60 (thickness in nm). Various free layers, such as CoFe 7, CoFeSiB 7, and CoFe 1.5/CoFeSiB 4/CoFe 1.5 were prepared and compared. The roughness values of the interface between free-layer and tunnel barrier were confirmed by using the techniques of X-ray reflectivity and transmission electron microscopy. As a result, the amorphous free-layer made the interface roughness of DMTJ smoother, reducing the interlayer coupling field and suppressing the bias voltage dependence of TMR ratio at a given voltage.      

Establishment of All Digital Closed-Loop Interferometric Fiber-Optic Gyroscope and Scale Factor Comparison for Open-Loop and All Digital Closed-Loop Configurations

This paper covers the design details of an all digital closed-loop interferometric fiber-optic gyroscope (ADCL-IFOG) prototype, constructed in TUBITAK UME, and scale factor comparison between open-loop and ADCL-IFOG prototypes with sine wave biasing modulation. The output of demodulation circuit, proportional to the applied rotation rate, was sampled by AD7714YN analog-to-digital converter (ADC), operated in 16 bit resolution. Error voltage, generated by microcomputer – controlled LTC 1667CG, 14 bit digital to analog converter (DAC), was sent to the phase modulator through a linear summing circuit to make Sagnac Phase Shift zero, depending on the rotation direction. For this implementation, the ultimate rotation rate of 1.84 ($^{circ}/{hbox{h}}$ ) was nullified. The averaged sensitivity of the proposed closed-loop IFOG in unit of error voltage applied to the phase modulator was determined as 132.65 $mu hbox{V}/(^{circ}/{hbox{h}}$ ). The scale factors of both the open-loop and ADCL-IFOG prototypes were compared in a range of 1–15270 ( $^{circ}/hbox{h}$) rotation rate, corresponding to Sagnac Phase Shifts varying from 0.00115 ( $^{circ}$) to 17.57448 ( $^{circ}$). The maximum peak to peak noise and the bias stability of ADCL-IFOG prototype were determined as 4.97 ($^{circ}/hbox{h}$ ) and 1.48 ($^{circ}/hbox{h}$ ) at 23.0$~^{circ}hbox{C}$ , respectively.      

Effect of Factors on Coercivity in Sr–La–Co Sintered Ferrite Magnets

We varied the composition and sintering temperature of Sr–La–Co ferrite magnets to analyze the effects of various important factors on coercivity $(H_{rm cJ})$. We examined the effects of crystal grain size and distribution, the mechanism of magnetization reversal, the degree of crystal grain orientation (OD), and the anisotropy field $(H_{rm A})$ on $H_{rm cJ}$. We proposed an equation based on the experimental results that expresses the measured $H_{rm cJ}$ and considers these effects as $H_{rm cJ} = C_{rm t}(0.4/R_{rm h})$ OD $(H_{rm A} - H_{rm d} - H_{rm in})$, where $C_{rm t}, R_{rm h}, H_{rm d}$, and $H_{rm in}$ are the crystal grain size effects on $H_{rm cJ}$ of sintered magnet, rotational hysteresis integral corresponding to the mechanism of magnetization reversal, demagnetizing field of shape anisotropy, and interaction field between crystal grains, respectively. We found that apart from the volume ratio for single-domain crystal grains and $H_{rm A}$, the mechanism of magnetization reversal had significant effects on $H_{rm cJ}$ for Sr–La–Co sintered ferrite magnets.      

Optimization of Spin-Valve Structure NiFe/Cu/NiFe/IrMn for Planar Hall Effect Based Biochips

This paper deals with the planar Hall effect (PHE) of Ta(5)/NiFe$(t_{rm F})$/Cu(1.2)/NiFe$(t_{rm P})$/IrMn(15)/Ta(5) (nm) spin-valve structures. Experimental investigations are performed for 50 $mu$m$times hbox{50} mu$m junctions with various thicknesses of free layer ( $t_{rm F} = 4, 8, 10, 12, 16, 26$ nm) and pinned layer ($t_{rm P} = 1, 2, 6, 8, 9, 12$ nm). The results show that the thicker free layers, the higher PHE signal is observed. In addition, the thicker pinned layers lower PHE signal. The highest PHE sensitivity $S$ of 196 $mu$V/(kA/m) is obtained in the spin-valve configuration with $t_{rm F} = 26$ nm and $t_{bf P} = 1$ nm. The results are discussed in terms of the spin twist as well as to the coherent rotation of the magnetization in the individual ferromagnetic layers. This optimization is rather promising for the spintronic biochip developments.      

Development of a New Selective Optical Sensor for Cd(II) Ions Based on 4-Hydroxy Salophen

A new sensor membrane based on immobilization of 4-hydroxy salophen on triacetyl cellulose has been developed for the determination of Cd(II) ions that displays excellent performance. The sensing membrane is capable of spectrophotometric determining of Cd(II) with an outstanding high selectivity over a dynamic range between 1.0$,times 10^{-6}$ and 5.0$,times 10^{-2}$ mol L$^{-1}$ with a limit of detection of 5.3 $,times 10^{-7}~$mol L $^{-1}$ (0.06 $mu$g mL $^{-1}$ The sensor shows a fast response time ($≪ {5}~$ min) and the membrane can be used for more than two months without observing any major deviation. The optode revealed very good selectivity with respect to many cations including alkali, alkaline earth, transition and heavy metal ions. The proposed sensor could be used to determine cadmium ions in water and waste water samples. Different experimental parameters such as variable affecting on sensor preparation and pH of the sample solution plus response time were studied. The optodes developed in the present work were found to be stable, cost effective, easy to prepare, and efficient for direct determination of Cd(II) in a variety of aqueous samples using spectrophotometry, with satisfactory results.      

A Vibration-Based PMN-PT Energy Harvester

We report design, modeling, analysis, and experimental study of a vibration-based piezoelectric energy harvester. The energy harvester is made of a composite cantilever of a single crystal relaxor ferroelectric material, $(1-x)$Pb(Mg $_{1/3}$Nb $_{2/3}$)O $_{3-x}$PbTiO $_3$ (PMN-PT), and a polydimethylsiloxane (PDMS) base layer. A PDMS proof mass is constructed at the tip of the composite cantilever beam and is used as a means to tune the system natural frequency. The use of the PMN-PT piezoelectric material and an interdigited electrodes (IDEs) design improves the energy conversion efficiency. A dynamic systems modeling approach is employed to analyze the responses and the performance of the harvester design. We have demonstrated that a prototype of the harvester with a size of 7.4 mm $,times,$2 mm $,times,$110 $mu$m outputs a voltage of 10 V (0.3 mW power) under a vibration excitation with a peak-to-peak amplitude of 1 mm at a frequency around 1.3 kHz. Based on the experimental results, the power density prediction of the proposed harvester design shows a superior performance than that of the other reported piezoelectric harvesters.      

Spin Seebeck Effect in Ni$_{81}$Fe$_{19}$/Pt Thin Films With Different Widths

The spin Seebeck effect (SSE) has been measured in Ni $_{81}$Fe $_{19}$ thin films which have different widths by using the inverse spin Hall effect (ISHE) in a Pt wire. The ISHE voltage induced by SSE is enhanced by lengthening the Pt wire. Combined with ISHE, SSE is applicable to the production of electric generators in which the thermoelectric figures of merit are tunable in terms of device structure.