共查询到20条相似文献,搜索用时 125 毫秒
1.
本文论述了应用佛尔哈德法测定肉制品中氯化物的含量,详细阐述了原理、试剂、步骤及其测定注意事项。主要阐述了氯化银沉淀对滴定终点判定的三种干扰排除方法:方法1、加入有机溶剂硝基汞;方法2、加入邻苯二甲酸二丁酯包裹氯化银沉淀;方法3、氯化银沉淀过滤,并通过实验数据比较这三种方法对实验结果的影响。结果表明三种方法均可行,但是有机溶剂毒性较强,氯化银沉淀过滤的方法实验过程较安全。考虑到准确、安全、经济三方面的因素,建议使用方法3。 相似文献
2.
3.
公差分析中的统计公差方法综述 总被引:2,自引:1,他引:1
公差分析是公差设计中的重要问题,公差分析方法分为极值法和统计公差方法两类,其中大多数方法是以概率统计原理为基础的统计公差方法。本文介绍了常用的公差分析方法,包括极值法、方和根法、修正的方和根法、蒙特卡洛模拟法、田口试验法和卷积方法等,并对这些方法进行了比较,阐述了统计公差方法的适用性。 相似文献
4.
王威 《仪表技术与传感器》1986,(5)
要获得可靠的粘接制品,粘接表面必须是清洁的、干燥的、坚固的。如果表面预先处理不好,不能得到理想粘接效果。常用的表面处理方法分为物理和化学方法,这两种方法通常配合使用。 1.物理方法普通表面处理的物理方法分为机械加工、喷砂、砂纸打磨和钢丝刷刷法。这些方法适用于金属的粘接表面处理。其中,喷砂法是一种最佳方法,因为它能迅速除掉表层 相似文献
5.
虚拟产品开发中的装配建模研究 总被引:3,自引:0,他引:3
从虚拟样机的角度出发 ,结合流行 CAD软件的特点 ,提出了在大装配的环境中快速有效地进行产品装配建模的四种方法 :引用集方法、部件过滤方法、小平面模型方法、以及特征简化方法。在实际产品开发中应用这些方法取得了较好的效果。 相似文献
6.
采用湿法消解技术溶样,用原子吸收(AAS)法测定米粉中铁的含量。通过对微波程序的研究,建立米粉、奶粉等的微波消解方法。该方法与传统马弗炉高温灰化消解方法及湿法消化比较,具有准确、简便、安全、省试剂、污染少、消解完全等优点。方法回收率为96%~106%。RSD(n=7)均小于2%。实际样品对比分析结果表明,方法具有良好的准确度,适于奶粉、米粉、豆粉等食品的快速分析。 相似文献
7.
8.
9.
分析了齿轮磨削烧伤的危害,总结并比较了针对齿轮磨削烧伤的多种检测方法及特点。根据检测与烧伤发生的时间先后,分为事先预防和事后检测的方法。事先预防的方法包括临界常数法、磨削力比法、磨削温度监测法、神经网络预测磨削烧伤;事后检测的方法包括酸蚀法、表层显微硬度法、金相检测法、变质层深检测法等有损检测方法以及目测法、X射线衍射残余应力检测法、成分分析法、涡流检测法、CCD图像法、磁弹法、声发射在线监测等无损检测方法。针对每种方法的研究进展,讨论了各种方法适用的范围和局限性,并进一步指出齿轮磨削烧伤检测的发展方向。 相似文献
10.
11.
Energy based signal parameter estimation method and a comparative study of different frequency estimators 总被引:1,自引:0,他引:1
The influences of window functions and noise on the performance of the energy-based signal parameter estimation method are investigated, and the appropriate parameters and algorithm are recommended accordingly. The frequency, amplitude and phase estimation variances of the energy based method are deduced and verified by computer simulation. The performances of four frequency estimation methods are compared: the energy based method, the interpolation based method, the phase difference based method and the Fourier transform (FT) continuous zoom based method. For the second and third methods, the Quinn algorithm and the phase difference based method with factor η=0.5 are recommended, respectively. It was found that each method has its own advantages. The energy based method has the best stability compared with others. The interpolated method has the lowest frequency estimation variance when the frequency biasδ is large, while the phase-difference based method does better when δ is low. The change of δ does not influence the maximum frequency estimation error of the FT continuous zoom based method. Comparatively speaking, the phase-difference based method has the least frequency estimation error. 相似文献
12.
针对传统模拟车轮踏面制动摩擦热流边界的加载方式存在的不足,如均布热源法计算精度较低和移动热源法计算效率较低,提出基于间隙热流加载法的车轮踏面制动摩擦温升有限元计算方法。以重载列车紧急制动为研究对象,通过与以往的移动热源法和均布热源法进行对比,研究新方法的计算精度和计算效率。计算结果显示:在计算精度方面,新方法不仅可以达到移动热源法的计算精度,还能体现均布热源法无法模拟的因闸瓦和踏面的接触-脱离现象导致的车轮踏面温度时间历程曲线波动现象。在计算时间方面,新方法的计算效率与均布热源法的相当,但新方法的计算速度比移动热源法的快4.3倍。 相似文献
13.
14.
15.
The reason for the rounding error in a measurement system under the condition of a limited sampling period is analysed, and a three-point method based on the difference algorithm (D3P method) is proposed. The effect of the rounding error is reduced by differential approximation of the roundness error and reconstruction of the transfer function. The generalized three-point method (G3P method), the three-point method based on the first-order difference algorithm (I-D3P method) and the three-point method based on the second-order difference algorithm (II-D3P method) are compared and analysed by simulation. The results show that the accuracy of the D3P method is greatly improved compared with that of the G3P method under the restricted sampling period and that the D3P method retains high precision in the case of failed error separation of the G3P method. An experimental system was constructed to realize error separation, and the experimental results show that the D3P method has higher accuracy than the G3P method over a small sampling period. 相似文献
16.
17.
18.
一种数字滤波器的设计方法及其应用 总被引:3,自引:0,他引:3
提出一种数字滤波器的设计方法——基于双线性变换的零极点匹配法,给出零极点匹配法的构思、设计公式和设计步骤。与几种常用的数字滤波器设计方法的比较和设计实例表明,零极点匹配法结合了双线性变换法和匹配变换法的特点,既具有不产生频率混叠,自动补充零点,抑制高频成分的特点,又具有保持原模拟滤波器零极点经过变换后不会变动的特点。因此,零极点匹配法尤其适合于低通数字滤波器和补偿数字滤波器的设计。实例表明,应用零极点匹配法设计的补偿数字滤波器显著改善了传感器的动态性能。 相似文献
19.
陶瓷磨削表面残余应力测试方法的研究 总被引:2,自引:0,他引:2
用研磨抛光法与连续腐蚀法测试陶瓷磨削表面残余应力 ,与 X射线衍射法相比较 ,具有经济、简便、测试精度高的优点。在避免了应变信号的不稳定性与附加应力的条件下 ,对于非金属氧化物陶瓷来说 ,这两种方法完全可以取代 X射射线衍射法 相似文献