纳米Ag-聚乙烯醇缩丁醛静电纺丝复合纳米纤维的制备及性能

采用静电纺丝技术制备纳米Ag-聚乙烯醇缩丁醛（PVB）复合纳米纤维,获得一类过滤性能和抗菌性能优异的空气过滤材料。采用TEM分析纳米Ag的形貌,采用SEM、FTIR和XRD等表征手段研究纳米Ag-PVB复合纳米纤维的微观形貌、化学结构以及结晶行为,并对其空气过滤性能、透气性能和抗菌性能进行了研究。结果表明：以乙醇为溶剂,当PVB含量为10wt%、纳米Ag含量为0.25wt%时,得到的纤维尺寸均一,平均直径为542.14 nm。性能测试结果表明,纺丝最佳时间为10 min,纳米Ag-PVB复合纳米纤维对PM2.5过滤效率为99.99%,过滤阻力为16 Pa,透气率为155.0 mm/s,并且对大肠杆菌表现出优异的抗菌性能,其抑菌率为95.52%。     

Preparation and characterization of electrospun nanofibers based on silk sericin powders

The present contribution reports the fabrication and characterization of silk sericin (SS) nanofibers via electrospinning. The function of solution concentration on morphological appearance and average diameter of the electrospun SS membranes was investigated by scanning electron microscopy. The structure and physical properties were observed by Fourier transform infrared spectroscopy (FT-IR), differential scanning calorimetry (DSC), and thermogravimetric analysis (TG). All beads were acquired in lower concentration of SS solution, 1.3–8.5 wt% of SS solutions, and beaded fibers were produced from 9.6, 11.7, 14.2, and 16.5 wt% of SS solution. The perfect nanofibers acquiring average diameters of 145 and 184 nm were fabricated from 20.9 to 22.9 wt% of SS solution, respectively. Results from FT-IR showed that in the as-spun fibers, SS was present in a random coil conformation, while after heat treatment, the molecular structure of SS was transformed into a β-sheet containing structure. DSC and TG analysis illustrated that trifluoroacetic acid can be eliminated by heating. The availability of SS nanofibers introduces a new set of possible uses of these amazing fibers at a scale not explored before. New uses include small diameter fibers for cell proliferation purposes, nanocomposite reinforcing fibers for nanotechnology, wound dressing, scaffolds for tissue engineering, and other biomedical applications.     

以电纺丝蛋白纤维为模板的pH响应性介孔SiO2纳米管的制备及药物释放

以资源丰富的家蚕丝为原料,氯化钙/甲酸为溶解体系,利用静电纺丝法制得丝素蛋白（SF）纳米纤维;以SF纤维为模板在其表面涂覆SiO₂,经煅烧后获得了介孔SiO₂纳米管（MSNTs）;在MSNTs管壁上接枝醛基（-CHO）,利用醛基与盐酸阿霉素（DOXHCl）氨基之间的动态共价键制得了pH响应性药物释放体系。通过SEM、TEM、TG、比表面积（BET）分析、FTIR及紫外-可见吸收（UV-Vis）光谱对MSNTs的微观结构、功能化及载药体系的pH响应性进行了表征。结果表明:当SF浓度在15wt%~17wt%时,可获得圆柱状且直径在（113±27）~（134±32）nm范围内可调的SF纤维模板;通过调整涂覆液中十六烷基三甲基溴化铵（CTAB）的浓度来调节MSNTs管壁的厚度,当CTAB用量从1.25 mg/mL增加到3.75 mg/mL时,MSNTs管壁厚度从30~39 nm增加到63~65 nm,对应的比表面积从154 m2/g下降到98 m2/g,介孔平均孔径从12.5 nm下降到10.0 nm;醛基修饰的MSNTs载DOXHCl（MSNT-CHO-DOX）体系,在pH值分别为7.4、6.5和5.5的磷酸氢二钾-磷酸二氢钾（PB）缓冲溶液中进行释放,100 h时释药率分别达到23%、35%和75%,实现了MSNT-CHO-DOX载药体系的pH响应性释放。      

静电纺纤维素纳米晶体/壳聚糖-聚乙烯醇复合纳米纤维的制备与表征

通过探索纤维素纳米晶体（CNC）添加量对壳聚糖-聚乙烯醇（CS-PVA）基体性能的影响,为静电纺CNC/CS-PVA复合纳米纤维的制备提供理论支撑。以CNC、CS和PVA为原料,采用静电纺丝法成功制备不同CNC含量（质量分数）的静电纺CNC/CS-PVA复合纳米纤维,并通过SEM、TGA和FTIR等分析手段对CNC/CS-PVA复合纳米纤维的微观结构和性能进行了表征。结果表明：添加CNC后静电纺CNC/CS-PVA复合纳米纤维直径变大,表面变粗糙,力学性能和热学性能提高;随着CNC含量的增加,静电纺CNC/CS-PVA纤维的杨氏模量（E）和抗拉强度（σ）先增强后减弱,而外延起始温度继续上升。当CNC含量为3wt%时,静电纺CNC/CS-PVA复合纳米纤维力学性能最好,相比于CS-PVA复合纳米纤维,E和σ分别提高了43.9%和24.8%;当CNC含量为20wt%时,静电纺CNC/CS-PVA复合纳米纤维直径分布不均匀,可以观察到单根纤维表面存在少量的球状结构物质,同时外延起始温度达到328.83℃;FTIR分析得出,CNC与CS和PVA之间只存在分子间的相互作用而没有发生化学反应;随着溶液的酸性减弱,碱性增强,不同CNC含量的静电纺CNC/CS-PVA复合纳米纤维稳定性逐渐提高,而CNC含量对其稳定性影响不大。     

Fabrication and characterization of electrospun titania nanofibers

Titania (TiO₂) nanofibers were fabricated by electrospinning three representative spin dopes made of titanium (IV) n-butoxide (TNBT) and polyvinylpyrrolidone (PVP) with the TNBT/PVP mass ratio being 1/2 in three solvent systems including N,N-dimethylformamide (DMF), isopropanol, and DMF/isopropanol (1/1 mass ratio) mixture, followed by pyrolysis at 500 °C. The detailed morphological and structural properties of both the as-electrospun precursor nanofibers and the resulting final TiO₂ nanofibers were characterized by SEM, TEM, and XRD. The results indicated that the precursor nanofibers and the final TiO₂ nanofibers made from the spin dopes containing DMF alone or DMF/isopropanol mixture as the solvent had the common cylindrical morphology with diameters ranging from tens to hundreds of nanometers, while those made from the spin dope containing isopropanol alone as the solvent had an abnormal concave morphology with sizes/widths ranging from sub-microns to microns. Despite the morphological discrepancies, all precursor nanofibers were structurally amorphous without distinguishable phase separation, while all final TiO₂ nanofibers consisted of anatase-phased TiO₂ single-crystalline grains with sizes of approximately 10 nm. The electrospun TiO₂ nanofiber mat is expected to significantly outperform other forms (such as powder and film) of TiO₂ for the solar cell (particularly dye-sensitized solar cell) and photo-catalysis applications.     

Fabrication and characterization of electrospun mullite nanofibers

Continuous mullite (3Al₂O₃·2SiO₂) nanofibers were fabricated by a sol-gel electrospinning technique. The detailed crystallization development and micromorphological evolution of both the as-electrospun nanofibers and the sintered mullite nanofibers were investigated. Results indicated that the spinnability and micromorphological evolution of mullite nanofibers are largely dependent on the viscosity η of the mullite sol, which can be adjusted by polyvinylprrolidone (PVP) content. Mullite nanofibers with common cylindrical morphology and diameters ranging from 400 nm to 800 nm could be obtained easily and rapidly when PVP content is ranged from 5 wt.% to 8 wt.%. High purity polycrystalline mullite nanofibers with diameters of about 200 nm were obtained after sintering at 1200 °C for 2 h. All sintered nanofibers consisted of single crystalline grains with size of approximately 100 nm.     

Fabrication and characterization of electrospun CdS-OH/polyacrylonitrile hybrid nanofibers

CdS-OH/polyacrylonitrile (PAN) hybrid nanofibers with strong photoluminescence and photocatalytic hydrogen production efficiency were synthesized by one-step co-electrospinning for the first time. The suspension of CdS-OH nanoparticles (size: 5 nm) in N,N-dimethylformamide (DMF) was mixed with PAN/DMF solutions to make spinning solutions, followed by electrospinning to make CdS-OH/PAN hybrid nanofibers. Their morphology and structure were characterized by SEM, TEM, XRD and fluorescence spectrophotometer. TEM and XRD measurements proved that the crystallographic structure of CdS-OH nanoparticles is identical to that of CdS. The CdS-OH nanoparticles were evenly distributed in PAN nanofibers of 320 nm in diameter. Thermogravimetrical analysis demonstrated that hybrid nanofibers were more thermally stable than neat PAN nanofibers. The hybrid nanofibers displayed excellent photoluminescent property. Additionally, they showed good photocatalytic hydrogen production efficiency with a rate of 13.5 μmol/h g fiber containing 60 mg of CdS-OH nanoparticles.     

EDC-NHS交联壳聚糖-聚氧化乙烯-丝素蛋白静电纺丝纳米纤维的制备及生物相容性

为提高壳聚糖(CS)-丝素蛋白(SF)复合纳米纤维的可纺性,解决其易溶胀从而导致纳米纤维尺寸稳定性较差的问题,采用聚氧化乙烯(PEO)提高纳米纤维的可纺性,用静电纺丝来制备纳米纤维,然后通过1-(3-二甲基氨基丙基)-3-乙基碳化二亚胺(EDC)和 N-羟基丁二酰亚胺(NHS)进行交联改性,制备了CS-PEO-SF三元体系的纳米纤维。利用FTIR、XRD、单纤维强力机、SEM分别表征了CS-PEO-SF纳米纤维的分子间相互作用、结晶性能、纳米纤维的力学性能和形貌,同时考察纳米纤维的溶胀度;利用细胞毒性和细胞培养测试表征了CS-PEO-SF纳米纤维的生物相容性。结果表明:PEO的加入可以有效提高CS-SF的可纺性,CS-PEO-SF纳米纤维的平均直径范围为240~510 nm,各组分纤维形态较好;随着SF含量的增加,CS-PEO-SF纳米纤维结晶性能、拉伸强度和断裂伸长率逐渐增大。经交联后的CS-PEO-SF纳米纤维结晶能力和溶胀度降低,力学性能提高。交联前后CS-PEO-SF纳米纤维均不具毒性,有良好的细胞相容性。      

疏水SiO2气凝胶的制备及表征

以聚二乙氧基硅氧烷(PDEOS)为原料,通过六甲基二硅氮烷(HMDZ)改性剂对制备的凝胶进行表面改性,并常压干燥得到疏水的SiO2气凝胶.研究了改性剂用量对气凝胶疏水性和结构的影响.疏水气凝胶与水的接触角达120°,常压干燥制备的气凝胶具有典型的气凝胶结构特征,气凝胶颗粒尺寸＜100nm,密度和比表面积分别在140～255kg/m3和480～605m2/g范围内.     

沉积纳米TiO2复合纳米纤维膜的制备及表征

以静电纺丝法和磁控溅射技术制备了负载TiO2纳米颗粒的聚甲基丙烯酸甲酯(PMMA)/蒙脱土(MMT)复合纳米纤维膜,通过光催化降解亚甲基蓝分析比较了不同溅射功率处理的纤维膜的光催化性能,应用电子显微镜(SEM)研究分析溅射功率对纤维形貌的影响以及光催化前后纤维表面形貌的变化.结果表明:经100W和120W功率处理的纤维...     

Preparation and characterization of electrospun core sheath nanofibers from multi-walled carbon nanotubes and poly(vinyl pyrrolidone)

Electrospinning is a versatile technique to prepare polymer fibers in nano to micrometer size ranges using very high electrostatic fields. Electrospun nanofibers with tunable porosity and high specific surface area have various applications, including chromatographic supports for protein separation, biomedical devices, tissue engineering and drug delivery matrices, and as key components in solar cells and supercapacitors. Unspinnable materials such as nanoparticles, nanorods, nanotubes or rigid conducting polymers can also be electrospun into fibers through co-axial electrospinning. In this study, we have prepared core-sheath nanofibers utilizing co-axial electrospinning. The core portion of these electrospun fibers consists of multi-walled carbon nanotubes and the sheath portion is poly(vinyl pyrrolidone) (PVP). Various morphologies were obtained by changing both core and sheath solution concentrations. The core-sheath nanofibers were characterized by scanning electron microscopy and transmission electron microscopy, to confirm core-sheath morphology, thermogravimetric analysis, and mechanical strength testing. The electrical conductivity of the surfaces of poly(vinyl pyrrolidone) fibers and poly(vinyl pyrrolidone)-multi-walled nanotube fibers were both 10(-15) S/m. The highest bulk conductivity observed for the poly(vinyl pyrrolidone)-multi-walled nanotube fibers was 1.2 x 10(-3) S/m.     

Fabrication and characterization of electrospun Ag doped TiO2 nanofibers for photocatalytic reaction

Titanium dioxide is one of the best semiconductor photocatalysts available for photocatalytic reaction of dye pollutants. To prevent the recombination caused by the relatively low photocatalytic efficiency, Ag doped TiO₂ nanofiber was prepared by electrospinning method. The photocatalysts (pure TiO₂ nanofiber and Ag doped TiO₂ nanofiber) were characterized by FE-SEM, XRD, XPS, and PL analysis. These photocatalysts were evaluated by the photodecomposition of methylene blue under UV light. Ag doped TiO₂ nanofiber was found to be more efficient than pure TiO₂ fiber for photocatalytic degradation of methylene blue. The photocatalytic degradation rate was applied to pseudo-first-order equation. The degradation of Ag doped TiO₂ nanofiber was significantly higher than the degradation rate of pure TiO₂ nanofiber. Activation energy was calculated by applying Arrhenius equation from the rate constant of photocatalytic reaction. The activation energies for the pure TiO₂ nanofibers calcined at 400 and 500 °C were 16.981 and 12.187 kJ/mol and those of Ag doped TiO₂ nanofibers were 18.317 and 7.977 kJ/mol, respectively.     

Preparation of electrospun nanofibers of star-shaped polycaprolactone and its blends with polyaniline

The electrospun nanofibers of synthetic star-shaped poly(?-caprolactone) (PCL) and its blends with polyaniline (PANI) were prepared. We utilized the advantages of star-shaped PCL and benefits of electrospinning method for obtainment of the uniform nanofibers with improved properties for tissue engineering. Biodegradable star-shaped PCL with four arms was synthesized by Sn(Oct)₂-catalyzed ring-opening polymerization (ROP) of ?-caprolactone (CL) from a pentaerythritol core. The chemical structure of star-shaped PCL was investigated by FTIR, and average molecular weight of polymer was determined by ¹HNMR (about 38000 g mol^?1). Thermal behavior of star-shaped PCL was also studied by Thermogravimetric Analysis (TGA). Moreover, the cyclic voltammetry (CV) measurement confirmed the preparation of electroactive nanofibers. The scanning electron microscopy (SEM) was also used to investigate the morphology of electrospun nanofibers produced from star-shaped PCL and its blends with PANI with different feed ratios. The presence of PANI resulted in fibers with diameters less than 100 nm and significant decrease of bead formation.     

静电纺丝法制备聚丙烯腈基纳米炭纤维及其表面结构表征

通过稳定化、炭化静电纺制的聚丙烯腈(PAN)前驱体纤维制备了直径为100nm～300nm的纳米炭纤维.用扫描电镜(SEM)、场发射扫描电镜(FESEM)、扫描隧道显微镜(STM)及扫描量热分析法(DSC)研究了纳米炭纤维及其前驱体纤维的形貌及结构.结果表明:纳米炭纤维及其前驱体纤维的直径表现为对数正态分布.静电纺制纤维的环化放热峰移向低温,表明静电纺制纤维可在较低的温度下引发环化.由于静电纺制纤维的粗糙表面及在热处理过程中的收缩行为,在纳米炭纤维表面形成了长度为10nm宽度为5nm的凹坑.     

Ultrasensitive chemiresistors based on electrospun TiO2 nanofibers

Nanostructured semiconducting metal oxides and particularly single nanowire devices offer exceptional gas sensitivity but at the expense of statistical variations and excessive noise levels. In this study TiO2/poly(vinyl acetate) composite nanofiber mats were directly electrospun onto interdigitated Pt electrode arrays, hot pressed at 120 degrees C, and calcined at 450 degrees C. This resulted in a novel multiple nanowire network composed of sheaths of 200-500 nm diameter cores filled with readily gas accessible approximately 10 nm thick single-crystal anatase fibrils. TiO2 nanofiber sensors tested for NO2, in dry air, exhibited exceptional sensitivity showing with, for example, a 833% increase in sensor resistance when exposed to 500 ppb NO2 at 300 degrees C, consistent with a detection limit estimated to be well below 1 ppb. Unusual response patterns were observed at high NO2 concentrations (> 12.5 ppm), consistent with n to p inversion of the surface-trap limited conduction facilitated by the high surface-to-volume ratio of this material.     

静电纺丝法制备Fe3+/TiO2纳米纤维及表征

以聚乙烯吡咯烷酮(PVP)为纤维模板,钛酸四丁酯(Ti[O(CH2)3CH3]4)和Fe3+为前驱体,乙醇为溶剂,醋酸为催化剂,采用静电纺丝法制备不同含铁量的复合纳米纤维Fe3+/TiO2,经500℃煅烧得到以锐钛矿为主的Fe3+/TiO2纳米纤维。采用扫描电子显微镜(SEM)和X射线衍射仪(XRD)分别表征了Fe3+/TiO2纳米纤维的形貌与晶态,计算了样品的晶粒尺寸和锐钛矿所占的比例,并比较了5%Fe3+/TiO2纳米纤维、5%Fe3+/TiO2粉体以及纯TiO2纳米纤维三者光催化降解亚甲基蓝(MB)的效果。研究表明:由静电纺丝法制备的5%Fe3+/TiO2纳米纤维的光催化降解效果比相同含铁量的粉体的降解效果好,TiO2纳米纤维比5%Fe3+/TiO2纳米纤维的光催化活性高。     

石墨烯改性聚丙烯腈基纳米炭纤维的制备及其性能

以氧化石墨为前驱体,采用真空热膨胀还原法获得了功能化的石墨烯材料。以石墨烯为纳米填料,采用静电纺丝法制备了一系列石墨烯改性聚丙烯腈(PAN)纳米复合纤维,经进一步预氧化和炭化得到纳米炭纤维。使用扫描电镜(SEM)、X射线衍射(XRD)、傅里叶变换红外光谱(FT-IR)、元素分析(EA)、热重(TGA)和差示扫描量热仪(DSC)研究了石墨烯对纳米炭纤维的宏观性能与微观结构的影响。结果表明,加入石墨烯后,PAN纳米纤维中分子取向变大,结晶度下降。对氧化、环化和脱氢反应可产生一定的抑制作用,导致预氧化反应程度下降。同时,石墨烯可作为炭化阶段微晶生长的晶核,有利于碳网平面的快速生长。     

含铁碳纳米纤维的制备与表征

在聚丙烯腈的N,N-二甲基甲酰胺和四氢呋喃的混合溶剂中添加聚二茂铁硅烷,通过溶液的静电纺丝,制备了含聚二茂铁硅烷微相分离的微纳前驱体纤维,经预氧化和炭化,得到负载Fe的碳纳米纤维膜;利用SEM、SEM-EDS和XPS分别对纳米纤维的形貌、尺寸、结构和组成进行了表征。     

聚砜纳米纤维增韧CFRP的制备及性能

介绍了一种聚砜纳米纤维增韧碳纤维/环氧树脂复合材料的新方法。无规取向的纳米纤维通过静电纺丝直接将纳米纤维接收于碳纤维/环氧树脂预浸布上,实现增韧复合材料的目的。探讨了混合溶剂(丙酮、DMAC)配比和聚砜纺丝溶液浓度对纳米纤维直径及分布的影响,测试了不同含量的聚砜纳米纤维增韧复合材料的型层间断裂韧性（G_ⅡC）,并同相等含量的聚砜溶剂法膜增韧复合材料性能进行了比较。在聚砜质量分数分别为1%、3%、5%的情况下,纳米纤维增韧复合材料的G_ⅡC分别增加54%、130%、177%,高于溶剂法膜增韧的复合材料。微观结构照片表明,纳米纤维增韧复合材料中,相分离后的聚砜小球贯穿于整个复合材料层间,而且呈现无规取向分布的海岛结构。增韧后复合材料的层间剪切强度（ILSS）都有略微的减小,溶剂法膜增韧后ILSS减小更明显。DMTA试验表明,与溶剂法膜相比较,纳米纤维与环氧树脂基体的相容性更好。      

Electrical properties of electrospun carbon nanofibers

Electrospun carbon nanofibers (ECNs) were prepared through stabilization and carbonization of electrospun polyacrylonitrile nanofibers as the precursor, and their morphological, structural, and electrical properties were evaluated. Temperature dependencies of resistivity of ECNs carbonized at several temperatures were investigated. The character of the temperature dependencies of resistivity was typical for semiconducting materials. The values of corresponding activation energies were obtained for ECN samples carbonized at different temperatures, and the results showed that the activation energy of ECNs decreased with the increase of carbonization temperature.