Effects of rare earth on inclusions and corrosion resistance of 10PCuRE weathering steel

The types,morphologies and distributions of nonmetallic inclusions in Cu-P weathering steels with and without rare earth were analyzed through a quantitative image analyzer,scanning electron microscopy(SEM)and energy dispersive spectroscopy(EDS)attached to SEM.Solid-soluble content of rare earth in the steels was analyzed by non-aqua electroanalysis and ICP.The results showed that rare earth modified the types and the morphologies of inclusions in the weathering steels.The small spherical rare earth oxysulfides and rare earth sulphides replaced the elongated MnS inclusions in the RE weathering steels.The rare earth inclusions dispersedly distributed and most inclusions were smaller than 2 μm in size.The optimum content of RE was 0.0065%-0.016% for 10PCuRE weathering steels containing about0.002% oxygen and 0.004% sulfur.Solid-soluble content of rare earth in steels was(14-20)x 10-6,which can act as a micro-alloying element.The corrosion resistance of 10PCuRE weathering steels and Q235 were studied by dry-wet cyclic immersion test.Their corrosion rates were obtained respectively.The polarization curves and pitting corrosion behaviors of weathering steels with and without rare earth were measured by electrochemical methods.The corrosion resistance of Cu-P weathering steels was improved by adding an appropriate amount of rare earth.Less and fewer rare earth inclusions largely decreased pitting susceptibility and rate of pit propagation.The pitting potential and the resistance against pitting corrosion of the RE weathering steel were significantly improved due to the modification of rare earth to inclusions.     

Lanthanide NIR luminescence for telecommunications, bioanalyses and solar energy conversion

Present-day advanced technologies heavily rely on the exciting magnetic and spectroscopic properties of lanthanide ions. In particular, their ability to generate well-characterized and intense near-infrared (NIR) luminescence is exploited in any modern fiber-optic telecommunication network. In this feature article, we first summarize the whereabouts underlying the design of highly luminescent NIR molecular edifices and materials. We then focus on describing the main trends in three applications related to this spectral range: telecommunications, biosciences, and solar energy conversion. In telecommunications, efforts concentrate presently on getting easily processable polymer-based waveguide amplifiers. Upconversion nanophosphors emitting in the visible after NIR excitation are now ubiquitous in many bioanalyses while their application to bio-imaging is still in its early stages; however, highly sensitive NIR-NIR systems start to be at hand for both in vitro and in vivo imaging, as well as dual probes combining magnetic resonance and optical imaging. Finally, both silicon-based and dye-sensitized solar cells benefit from the downconversion and upconversion capabilities of lanthanide ions to harvest UV and NIR solar light and to boost the overall quantum efficiency of these next-generation devices.     

Evaluation of D113 cation exchange resin for the removal of Eu(Ⅲ) from aqueous solution

Batch adsorption experiments were conducted for the adsorption of Eu(Ⅲ) ions from aqueous solution by D113 resin. The results indicated that D113 resin could adsorb Eu(Ⅲ) ion effectively from aqueous solution. The adsorption was strongly dependent on pH of the medium with enhanced adsorption as the pH turned from 3.50 to 7.00 and the optimal adsorption condition was in HAc-NaAc medium with pH value of 6.50. The maximum uptake capacity of Eu(Ⅲ) ions was 290.9 mg/g D113 at 298 K, at an initial pH value of 6.50. The overall adsorption process was best described by Lagergren-first-order kinetics. When Freundlich and Langmuir isotherms were tested, the latter had a better fit with the experimental data. The thermodynamic parameters such as free energy (G) which were all negative, indicated that the adsorption of Eu(Ⅲ) ions onto D113 resin was spontaneous and the positive value of enthalpy (H) showed that the adsorption was endothermic in nature. Thomas model was applied to experimental column data to determine the characteristic parameters of column useful for process design. Furthermore, Eu(Ⅲ) could be eluted by using 3.0 mol/L HCl solution and the D113 resin could be regenerated and reused.     

Phase structure and temperature dependent luminescence properties of Sr2LiSiO4F: Eu2+ and Sr2MgSi2O7: Eu2+ phosphors

Green-emitting Sr2LiSiO4F:Eu2+ and blue-emitting Sr2MgSi2O7:Eu2+ phosphors were synthesized by the conventional high temperature solid-state route,respectively.Their structures and photoluminescenee properties were comparatively investigated.It was found that the mixture phases of Sr2MgSi2O7 and SrF2 were obtained when a part of Sr2+ in Sr2LiSiO4F was replaced by some amount of Mg2+ in order to design the possible SrMgLiSiO4F:Eu2+ phosphor.Based on the photoluminescence analysis,Sr2LiSiO4F:Eu2+ phosphor exhibited a green broad emission band of main peak at 513 nm under the excitation of 365 nm,while the Sr2MgSi2O7:Eu2+ and SrMgLiSiO4F:Eu2+ phosphor showed blue emission centered at 467 nm.The temperature dependent photoluminescence properties and room temperature decay time for the three kinds of phosphors were also discussed in this paper.     

Er3+-substituted W-type barium ferrite: preparation and electromagnetic properties

Er3+-substituted W-type barium ferrites Ba1-xErx(Zn0.3Co0.7)2Fe16O27(x=0.00,0.05,0.10,0.15,0.20)were synthesized by polymer adsorbent combustion method.Samples were characterized by X-ray diffraction analysis(XRD),X-ray fluorescence(XRF),scanning electron microscopy(SEM)and network analyzer to investigate the relationships among Er3+concentration,crystal structure,surface mcrphology and electromagnetic properties.All the XRD patterns showed pure phase of W-type barium ferrite when x≤0.15,while the impurity phase of ErFeO3 appeared when x=0.20.The pure W-type barium ferrite showed a hexagonal flake shape.In addition,the microwave electromagnetic properties of samples were analyzed in the frequency range of 2-18 GHz.It was indicated that the electromagnetic properties were significantly improved when Er3+doping content was 0.10.The reasons were also discussed using electromagnetic theory.The optimized ferrite exhibited excellent microwave absoption performance.The maximum of reflection loss(RL)reached about-27.4 dB and RL was below-10dB at the frequency range from 8.4 GHz to 18 GHz,when the thickness was 2.6 mm.     

EXAFS investigation and luminescent properties of nanosized Tb: Lu2O3 phosphors

Nanosized terbium doped Lu2O3 phosphors were synthesized via a modified co-precipitation processing.The as-prepared Tb:Lu2O3 phosphors was consisted of well crystallized nanosized sphere particles with a diameter of about 30 nnx Local structure of Tb ions in Lu2O3 lattice was investigated by an analytical approach based on Fourier transformation of the extended X-ray absorption fine structure(EXAFS) data.X-ray near edge structure (XANES) spectra suggested that all Tb ions doped were tervalonce.EXAFS results indicated that Tb ions have entered the Lu2O3 cubic lattice by means of solid solution.The coordination number and first shell Tb-O distance dropped with the increasing of Tb concentration.Emission spectra of the phosphors was shown to be typical for Tb3+ with main components at 542,550 and 490 nm,derived from irradiative relaxation of 5D4 level.The emission intensity decreased severely with the increasing of Tb concentration from 1 mol.% to 15 tool.%,suggesting a significant concentration quenching above 1 mol.% Tb.The reduction of emission intensity was interpreted by higher distortion derived relaxation among the surface state resident Tb3+ ions.     

Multi-Pass Simulation of Heavy Plate Rolling Including Intermediate Forced Cooling

Thermomechanical Controlled Processing (TMCP) including accelerated cooling after the final hot rolling pass is a well-established technology,widely applied in HSLA steel plate production.However,there are still certain limitations,especially for thicker plate.The rolling schedule includes a long holding period (HP) after the roughing stage to allow the temperature to fall sufficiently for optimised TMCP during finishing.Intermediate Forced Cooling (IFC) applied during the HP can increase productivity by decreasing the required hold time,can restrict austenite grain growth,and can also improve the subsequent strain penetration in thick plate with further metallurgical benefits.Multi-pass plane strain compression (PSC) tests have been performed on the thermomechanical compression (TMC) machine at Sheffield University including different severities of IFC.Clearly it is impossible to simulate all aspects of the temperature and strain gradients present in thick plates in laboratory specimens,and most of the tests were conducted at temperatures and strains calculated by Finite Element modelling as relevant to specific positions through the plate thickness.However,some aspects of the gradients were addressed with tests using cold platens.The results have indeed shown that IFC can shorten the HP and reduce austenite grain growth and its variation across thick plate.     

Overview of Particles and Bubbles in Continuously Cast Steel

This paper gives an overview of phenomena associated with particles and bubbles in continuously cast steel. During steel processing from deoxidation to solidification the inclusion population undergoes changes with opportunities of removal. Flotation is an important separation mechanism. Inclusion particles may accumulate in the solidifying strand, thus forming enriched bands, which depend on the type of casting machine. Bubbles are created during inert gas injection. They also change in size, can float out, but also form accumulation bands. The interaction of bubbles and particles is discussed. Internal structure that recently has been observed on the inner surface of bubbles will be reviewed.     

烦恼 快乐 艺术——池莉“人生三部曲”解读

池莉的"人生三部曲"--<烦恼人生>、<不谈爱情>、<太阳出世>诉尽了普普通通的市民烦恼,小说中主人公被柴米油盐、吃喝拉撒、老婆孩子等琐事所烦着,从而构成他们的"烦恼人生".然而池莉通过自己的艺术创作,以积极的人生态度,又让读者体会到生活本身的快乐,"烦恼人生"中包含着"快乐人生".     

属性块在工程图形中的研究与应用

介绍了在工程图形中用属性块标注表面粗糙度的方法.采用属性块不仅能避免大量重复性的工作,还能节省大量的存储空间,具有提高绘图速度、质量,便于修改,资源共享等应用价值.     

钛渣酸解过程中物相变化特征探讨

明确物相变化是剖析钛渣酸解机理和改进酸解工艺的关键点之一.综合应用化学分析、X射线衍射(XRD)分析、矿物解离分析以及扫描电镜形貌分析对某74钛渣酸解过程中主要物相的含量、形貌变化以及Ti、Si两种元素的含量及赋存变化进行了研究.结果表明:钛渣主要由黑钛石和辉石组成,酸解过程中黑钛石含量逐渐减小,辉石含量逐渐增加;反应...     

天铁物料结算系统的开发设计

天铁为了解决物料结算由于手工操作出现的差错率高、控制成本困难等问题,开发设计了计算机物料结算系统。从系统的安全性、网络和硬件的实现等方面,介绍了该系统的主要功能和特点及运行情况。系统运行情况证明,该系统的开发实现了数据共享和集中存储,完善了采购和销售的各环节,程序运行稳定,提高了工作效率。     

Evaporation Research: Review and Interpretation

Literature regarding evaporation from soil, wet plant surfaces, and sprinkler droplets was examined, normalized, and interpreted. Much of the evaporation literature is difficult to compare and interpret; this paper offers comparisons and discussions of various findings by others as well as by the writers. Techniques of measuring and estimating evaporation from irrigation and rainfall are discussed. The partitioning between increased evaporation and decreased transpiration from a variety of research is quantified. Factors that impact the various forms of evaporation are listed and quantified. This review and summary will provide practitioners and researchers with theoretical and practical guidance on measurement techniques and estimates of evaporation under a wide range of conditions.     

露天金属矿采选联合优化的研究进展

露天金属矿采选联合优化的研究进展是从实际的工作中总结出来的,将一些特殊的露天金属矿采选联合优化方式进行归类,在通过系统的研究分析总结出一套适合企业自身的露天金属矿采选联合优化方案。企业产生利润的途径大体如下,首先,需要对矿石的销售路径做出计划,在此基础上对钻孔、爆破、破碎、碾磨、提纯等多个阶段进行深度控制。上述的钻孔及爆破是整个露天金属矿采选联合优化过程中最为重视的重要环节。露天金属矿采选联合优化一般是通过采选联合优化的方式来对采场的地层环境、岩石性质等作出露天金属矿采选联合优化的整体调整。露天金属矿采选联合优化是整个优化爆破参数及装药结构的主要部分,优化爆破参数及装药结构的及时整改能够产生一定的积极作用,比如露天金属矿采选联合优化的总成本上的最优。     

Sham reasoning, Humpty Dumpty, and the burden of proof.

Slife and Reber ask of psychologists that they recognize their prejudice against theism and the incompatibility between theistic and naturalistic worldviews. Yet, the subtext of their article is that theism and naturalism are equally valid and that psychology’s secularism is a mistake. Given that theism is not beyond reason, the only sufficient ground for charging psychologists with prejudice is if (i) theism has survived serious attempts at conceptual and empirical test, and (ii) psychology ignores or disguises this fact. So, the grounds for believing in the reality of a supernatural existent are highly relevant to the authors’ allegation. However, their concept of God affords no such grounds. They disavow the logic involved in the ordinary meaning of the term “incompatible” and they ignore a crucial distinction between conditions of existence and qualities of things or processes. The consequence is that either God is this-worldly, and there is no ontological basis to Slife and Reber’s incompatibility thesis, or God’s mode of existence is quite different from the mode of existence of ordinary things and all the problems of dualism follow. Either way, their charge of prejudice is without foundation. The burden of proof rests with the defender of theism and, for now, psychology’s secularism can be considered a mark of the discipline’s (sometimes questionable) rationality. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

锂电池极片轧制技术研究进展

动力锂离子电池作为新能源汽车的"心脏",其核心部件——正负极片的轧制厚度一致性、压实密度及剥离强度等指标直接决定着锂电池关键性能及安全性.针对锂电池极片轧制工艺技术及装备,介绍了近年来国内外学者在极片新型轧制工艺、轧制后极片微结构及性能、轧制过程工艺模型及极片轧制设备等方面的研究现状及研究成果,并结合未来锂电池行业需求...     

Design Error Classification, Causation, and Prevention in Construction Engineering

Construction and engineering practitioners have found it increasingly difficult to learn from their mistakes, particularly with regard to the prevention, identification and/or containment of design errors. Yet, design errors have been the root cause of numerous catastrophic accidents that have resulted in the death and injury of workers and members of the public. This paper examines and classifies the nature of error and design error causation in construction and engineering projects. A review of the normative literature revealed that design errors are caused by an array of factors that can work interdependently. A generic framework is developed that classifies design error according to people, the organization, and project is presented. The paper suggests that people, over and above organizational and project management strategies, have the greatest propensity to reduce errors through the process of situated learning and knowing. This is because the working environment provided by an organization and the processes used to deliver construction and engineering projects influence the nature and ability of people to undertake tasks. Consequently, there is no single but rather a multitude of strategies that need to be adopted in congruence to reduce design errors so that safety and project performance are ameliorated.     

Observed & experiential integration (OEI): Discovery and development of a new set of trauma therapy techniques.

Psychotherapy integration leaders have recently asserted that the future of psychotherapy will involve incorporation of neuroscience. In the past 18 years, techniques have been discovered and developed to treat trauma and dissociation at all three neurobiological levels of Porges' (2001, 2007) polyvagal theory. This approach is known as Observed & Experiential Integration (OEI). The originator incorporated elements of Focusing, Eye Movement Desensitization and Reprocessing, and Educational Kinesiology. OEI theory emerged from experiential psychotherapy, and relational psychoanalytic and behavioral concepts were assimilated during 45,000 hours of psychotherapy. Five sets of OEI techniques are used for titration of affective and somatic intensity, reduction of negative transference, and deepening of social connection. OEI involves neuro-activation & microattunement (NAMA). It has been applied with body therapies and neurotherapy and used with children, couples, and families. OEI has also been applied to addictive and self-destructive urges, panic attacks, and eating disorders. Case examples illustrate applications of this treatment. (PsycINFO Database Record (c) 2011 APA, all rights reserved)     

EDTA络合滴定法联合测定硅钙钡镁合金中钙钡镁

建立了一种快速测定硅钙钡镁合金中钙、钡和镁含量的分析方法。以盐酸、硝酸和氢氟酸分解试样,高氯酸冒烟除去残余的盐酸、硝酸和氢氟酸,经过氨水沉淀分离铁、铝等干扰元素后,在pH 10的NH₃·H₂O-NH₄Cl缓冲体系中,以邻甲酚酞指示滴定终点, EDTA络合滴定法测定钙镁合量;在pH≥12的氢氧化钾缓冲体系中,分别以钙指示剂和钙黄绿素-茜素混合指示剂指示滴定终点, EDTA滴定法分别测定钙及钙钡合量。根据钙钡合量与钙含量的差值和钙镁合量与钙含量的差值,可分别得到钡和镁含量。经氨水沉淀后试液中残余的铁、铝和其他干扰离子用三乙醇胺掩蔽,钡对滴定钙和钙镁合量以及镁对滴定钙和钙钡合量的干扰分别通过生成硫酸钡和氢氧化镁沉淀的方法消除。建立的方法用于实际硅钙钡镁合金中钙、钡和镁测定,测定值与对照方法测定值相符,钙、钡和镁的相对标准偏差分别为0.38%、1.9%和1.9%。