The effect of some bis-thiadiazole derivatives on the corrosion of mild steel in hydrochloric acid

The inhibition effect of bis-thiadiazole derivatives (BTDs) against the corrosion of mild steel in 1 M HCl solution was studied by weight loss, electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization methods. All the BTDs exhibited >90% inhibition efficiency at concentration as low as 40 ppm. The adsorption of BTDs obeyed Langmuir adsorption isotherm. Both thermodynamic and activation parameters were calculated and discussed. Polarization curves indicate that they are mixed type of inhibitors. All the BTDs were adsorbed physically at lower concentration where as chemisorption was favoured at higher concentration.     

Thermodynamic, electrochemical and quantum chemical investigation of some Schiff bases as corrosion inhibitors for mild steel in hydrochloric acid solutions

The corrosion inhibition of mild steel in 1.0 M HCl solution by four Schiff bases was investigated using weight loss and electrochemical measurements and quantum chemical calculations. All compounds showed >90% inhibition efficiency at their optimum concentrations. The activation energy (E_a) of corrosion and other thermodynamic parameters were calculated to elaborate the mechanism of corrosion inhibition. The adsorption of the inhibitors on the mild steel surface follows Langmuir isotherm model. Polarization studies indicated that all studied inhibitors are mixed type. The computed quantum chemical properties viz., electron affinity (EA) and molecular band gap (ΔE_MBG) show good correlation with experimental inhibition efficiencies.     

Novel benzimidazole derivatives as corrosion inhibitors of mild steel in the acidic media. Part I: Gravimetric,electrochemical, SEM and XPS studies

Three novel benzimidazole derivatives, 2-aminomethyl benzimidazole (ABI), bis (2-benzimidazolylmethyl) amine (BBIA) and tri (2-benzimidazolylmethyl) amine (TBIA), have been studied as inhibitors for mild steel in 1.0 M HCl. The three compounds prevent mild steel from corrosion by adsorption on the steel surface and forming insoluble complex with ferrous species. Inhibition efficiency increases with the increase in the number of benzimidazole segments in the molecules (TBIA > BBIA > ABI). Protection efficiency of the inhibitors depends on concentration of inhibitor, temperature and concentration of hydrochloric acid.     

Inhibition effect of novel nonionic surfactants on the corrosion of carbon steel in acidic medium

The inhibition effect of novel nonionic surfactants on the corrosion of carbon steel (CS) in 1 M HCl was studied at different temperatures (20-60 °C) by weight loss, electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization methods. The CS surface morphology was investigated by SEM. The obtained results showed that the prepared nonionic surfactants are excellent inhibitor in 1 M HCl, and the inhibition efficiency (η) increases with the inhibitor concentration and temperature increasing. The adsorption of inhibitors on the CS surface obeys the Langmuir adsorption isotherm equation. Thermodynamic parameters have been obtained by adsorption theory. Polarization curves show that the synthesized inhibitors are mixed-type inhibitors in hydrochloric acid.     

On the inhibition of mild steel corrosion by 4-amino-5-phenyl-4H-1, 2, 4-trizole-3-thiol

The corrosion inhibition of mild steel in a 2.5 M H₂SO₄ solution by 4-amino-5-phenyl-4H-1, 2, 4-trizole-3-thiol (APTT) was studied at different temperatures, utilising open circuit potential, potentiodynamic and impedance measurements. The results indicate that APTT performed as an excellent mixed-type inhibitor for mild steel corrosion in a 2.5 M H₂SO₄ solution and that the inhibition efficiencies increased with the inhibitor concentration but decreased proportionally with temperature. The kinetic and thermodynamic parameters for adsorption of APTT on the mild steel surface were calculated. A chemisorption mechanism of APTT molecules on the mild steel surface was proposed based on the thermodynamic adsorption parameters.     

A cationic gemini-surfactant as effective inhibitor for mild steel in HCl solutions

A cationic gemini-surfactant, namely 1,4-bis (1-chlorobenzyl-benzimidazolyl)-butane (CBB) was synthesized and its inhibition effect on the corrosion of mild steel in 0.5 M HCl solution was investigated by weight loss and electrochemical techniques. The results showed that CBB acts as an excellent corrosion inhibitor in 0.5 M HCl by suppressing simultaneously the cathodic and anodic processes via chemical adsorption on the surface of steel, which followed the Langmuir adsorption isotherm. The inhibition efficiency increased with the increase of CBB concentration and temperature. The adsorption mechanism of the compound was discussed in terms of thermodynamic and kinetic parameters deduced from the experimental data.     

The effects of pharmaceutically active compound doxycycline on the corrosion of mild steel in hydrochloric acid solution

Corrosion inhibition of mild steel in hydrochloric acid solution by doxycycline has been studied by weight loss measurements, polarization resistance, Tafel polarization and electrochemical impedance spectroscopy. The inhibitor showed more than 95% inhibition efficiency at optimum concentration 9.02 × 10⁻⁴ M. Potentiodynamic polarization suggests that it is a mixed type of inhibitor. Electrochemical impedance spectroscopy was used to investigate the mechanism of corrosion inhibition. Thermodynamic parameters were calculated to investigate mechanism of inhibition. The compound follows Langmuir adsorption isotherm. AFM studies of mild steel surface with and without inhibitor were performed and calculated roughness also supported the inhibition data.     

A preliminary investigation of corrosion inhibition of mild steel in 0.5 M H2SO4 by 2-amino-5-(n-pyridyl)-1,3,4-thiadiazole: Polarization, EIS and molecular dynamics simulations

The efficiency, as steel corrosion inhibitors in 0.5 M H₂SO₄, of two thiadiazole derivatives, 2-amino-5-(3-pyridyl)-1,3,4-thiadiazole (3-APTD) and 2-amino-5-(4-pyridyl)-1,3,4-thiadiazole (4-APTD), was investigated by polarization and electrochemical impedance spectroscopy. The protection efficiency increases with increasing inhibitors concentration, but the temperature has hardly effect on the inhibition efficiency of APTD. The adsorption of APTD on iron surface obeys the Langmuir isotherm. The experimental results show that the inhibition efficiency of 4-APTD is higher than that of 3-APTD, and the molecular dynamics (MD) simulations show that the adsorption of 4-APTD on iron surface has the higher binding energy than that of 3-APTD.     

Electrochemical behaviour of carbon steel in acid chloride solution in the presence of dodecyl cysteine hydrochloride self-assembled on gold nanoparticles

In this work, the dodecyl cysteine hydrochloride surfactant was synthesized. The surface properties of this surfactant were studied using surface tension technique. The nanostructure of this surfactant with the prepared gold nanoparticles was investigated using TEM technique. The synthesized surfactant and its nanostructure with the prepared gold nanoparticles were examined as non-toxic corrosion inhibitors for carbon steel in 2 M HCl solution using potentiodynamic polarization and electrochemical impedance spectroscopy techniques. The results show that the percentage inhibition efficiency (η%) for each inhibitor increases with increasing concentration until critical micelle concentration (CMC) is reached. The maximum inhibition efficiency approached 76.6% in the presence of 175 ppm of dodecyl cysteine and 90.8% in the presence of the same concentration of dodecyl cysteine hydrochloride self-assembled on gold nanoparticles. Polarization data indicate that the selected additives act as mixed type inhibitors. The slopes of the cathodic and anodic Tafel lines (β_c and β_a) are approximately constant and independent of the inhibitor concentration. Analysis of the impedance spectra indicates that the charge transfer process mainly controls the corrosion process of carbon steel in 2 M HCl solution both in the absence and presence of the inhibitors. Adsorption of these inhibitors on carbon steel surface is found to obey the Langmuir adsorption isotherm. From the adsorption isotherms the values of adsorption equilibrium constants (K_ads) were calculated. The relatively high value of (K_ads) in case of dodecyl cysteine hydrochloride self-assembled on gold nanoparticles reveals a strong interaction between the inhibitor molecules and the metal surface.     

Inhibition effect of nonionic surfactant on the corrosion of cold rolled steel in hydrochloric acid

The inhibition effect of Tween-20 as a nonionic surfactant on the corrosion of cold rolled steel (CRS) in 1.0-8.0 M HCl has been studied at different temperatures (20-50 °C) by weight loss and potentiodynamic polarization methods. Atomic force microscope (AFM) provided the CRS surface conditions. The results show that Tween-20 is a good inhibitor in 1.0 M HCl, and the inhibition efficiency (IE) increases with the inhibitor concentration, while decreases with increasing the hydrochloric acid concentration and temperature. Effect of immersion time was also studied and discussed. The adsorption of inhibitor on the CRS surface obeys the Langmuir adsorption isotherm equation. Both thermodynamic and kinetic parameters have been obtained by adsorption theory and kinetic equations. The inhibition effect is satisfactorily explained by the parameters. Polarization curves show that Tween-20 is a mixed-type inhibitor in hydrochloric acid. The results obtained from weight loss and polarization are in good agreement, and Tween-20 inhibition action could also be evidenced by surface AFM images.     

Tryptamine as a corrosion inhibitor of mild steel in hydrochloric acid solution

The inhibitor effect of tryptamine on the corrosion of mild steel in 0.5 M hydrochloric acid at 30 °C was investigated using linear polarization, potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) techniques. The inhibition efficiency increases with an increase in concentration of tryptamine. At 500 ppm tryptamine the inhibition efficiency calculated by these techniques is around 97%. Cathodic and anodic polarization curves of mild steel in the presence of different concentrations of tryptamine at 30 °C reveal that it is a mixed type inhibitor. Tryptamine follows Langmuir adsorption with adsorption free energy of −35.07 kJ mol⁻¹.     

Adsorption and inhibitive properties of some new Mannich bases of Isatin derivatives on corrosion of mild steel in acidic media

Adsorption of four derivatives of piperidinylmethylindoline-2-one on mild steel surface in 1 M HCl solution and its corrosion inhibition properties has been studied by a series of techniques, such as polarization, electrochemical impedance spectroscopy (EIS), weight loss and quantum chemical calculation methods. The values of activation energy (E_a) for mild steel corrosion and various thermodynamic parameters were calculated and discussed. Potentiodynamic polarization measurements showed that all inhibitors are mixed type. The degree of surface coverage was determined by using weight loss measurements and it was found that adsorption process of studied inhibitors on mild steel surface obeys Langmuir adsorption isotherm.     

Cefotaxime sodium: A new and efficient corrosion inhibitor for mild steel in hydrochloric acid solution

The corrosion inhibition of mild steel in 1 M HCl solution by cefotaxime sodium has been studied by Tafel polarization, electrochemical impedance spectroscopy (EIS) and weight loss measurement. The inhibitor showed 95.8% inhibition efficiency at optimum concentration 300 ppm. Results obtained revealed that inhibition occurs through adsorption of the cefotaxime on metal surface without modifying the mechanism of corrosion process. Potentiodynamic polarization studies suggest that it is a mixed type of inhibitor. Electrochemical impedance spectroscopy techniques were also used to investigate the mechanism of corrosion inhibition.     

The effect of ionic liquids with imidazolium and pyridinium cations on the corrosion inhibition of mild steel in acidic environment

Ionic liquids with chemical formula 1,3-dioctadecylimidazolium bromide and N-Octadecylpyridinium bromide were synthesized by conventional and microwave-assisted reactions, respectively. Ionic liquids tested as corrosion inhibitors after polarization curves displayed corrosion protection efficiency within 82-88% at 100 ppm for mild steel in a 1 M aqueous solution of sulfuric acid. Standard free energy indicated that corrosion inhibition occurred by a chemical adsorption process. Surface analysis (SEM, EDX) completed by XRD and Mössbauer spectroscopy indicated the presence of carbon species pertaining to inhibitor and corrosion products, which was rationalized in an inhibition mechanism.     

Corrosion control of copper in nitric acid solutions using some amino acids - A combined experimental and theoretical study

Inhibition performance of three amino acids, namely l-methionine (MIT), l-methionine sulfoxide (MITO) and l-methionine sulfone (MITO2), as corrosion-safe inhibitors for copper surface in 1.0 M nitric acid was investigated by weight loss, dc polarization and ac impedance techniques. A significant decrease in the corrosion rate of copper was observed in the presence of the investigated compounds. The reactivates of the compounds under investigation were analyzed through Fukui functions, to explain their inhibition performance. Simulation techniques incorporating molecular mechanics and molecular dynamics were used to simulate the adsorption of l-methionine derivatives, on copper (1 1 1) surface in nitric acid.     

Application of some ferrocene derivatives in the field of corrosion inhibition

Three ferrocene derivatives, namely 1,1′-diacetylferrocene (Diacetyl Fc), 1,1′-diformylferrocene (Diformyl Fc) and 2-benzimidazolythioacetylferrocene (BIM Fc) were synthesized and their inhibitive effects against mild steel corrosion in aerated 0.5 M H₂SO₄ and 1 M HCl solutions were evaluated. Corrosion measurements based on polarization resistance (R_p), potentiodynamic polarization curves and electrochemical impedance spectroscopy (EIS) indicate that Diacetyl Fc, in most cases, accelerates mild steel corrosion in HCl while Diformyl Fc and BIM Fc act as weak inhibitors. In H₂SO₄ solution, ferrocene derivatives show good inhibition performance. The efficiency of the inhibitors follows the order: BIM Fc > Diformyl Fc ? Diacetyl Fc. Adsorption of both Diacetyl Fc and Diformyl Fc obey Langmuir adsorption isotherm with very low value of free energy of adsorption ΔG^° for the Diformyl Fc (physisorption) while adsorption of BIM Fc follows that of Frumkin with high negative value of ΔG^° (chemisorption). Both Diformyl Fc and BIM Fc act as mixed-type inhibitors with predominant effect on the anodic dissolution of iron. Analysis of the polarization curves and impedance spectra indicates that charge transfer process mainly controls mild steel corrosion in H₂SO₄ solution without and with ferrocene compounds. The mechanism of corrosion inhibition or acceleration by ferrocene derivatives was discussed in the light of the molecular structure of the additives.     

The inhibition of mild steel corrosion in acidic medium by 1-methyl-3-pyridin-2-yl-thiourea

The effect of 1-methyl-3-pyridin-2-yl-thiourea on the corrosion resistance of mild steel in H₂SO₄ solution was investigated by different techniques. The results show that the inhibition efficiency increases with the increase of inhibitor concentration. This compound affects both the anodic dissolution of steel and the hydrogen evolution reaction in 0.5 M H₂SO₄. The adsorption of this inhibitor is also found to obey the Langmuir adsorption isotherm. From the adsorption isotherm, value of the ΔG_ads for the adsorption process was calculated. From the corrosion rate obtained at 25-45 ± 1 °C E_a, ΔH_a and possible mechanism have been proposed.     

Corrosion inhibition of mild steel in hydrochloric acid solution by some double Schiff bases

The inhibition effect of four double Schiff bases on the corrosion of mild steel in 2 M HCl has been studied by polarization, electrochemical impedance spectroscopy (EIS) and weight loss measurements. The inhibitors were adsorbed on the steel surface according to the Langmuir adsorption isotherm model. From the adsorption isotherm, some thermodynamic data for the adsorption process were calculated and discussed. Kinetic parameters activation such as E_a, ΔH∗, ΔS∗ were evaluated from the effect of temperature on corrosion and inhibition processes. Quantum chemical calculations have been performed and several quantum chemical indices were calculated and correlated with the corresponding inhibition efficiencies.     

Corrosion control of mild steel using 3,5-bis(4-methoxyphenyl)-4-amino-1,2,4-triazole in normal hydrochloric acid medium

The inhibition performance of the 3,5-bis(4-methoxyphenyl)-4-amino-1,2,4-triazole (4-MAT) on mild steel in normal hydrochloric acid medium (1 M HCl) at 30 °C was tested by weight loss, potentiodynamic polarisation and electrochemical impedance spectroscopy (EIS) techniques. This organic compound inhibits the acidic corrosion even at very low concentration, reaching a value of inhibition efficiency up to 98% at a concentration of 3 × 10⁻⁴ M. The results obtained from the different corrosion evaluation techniques are in good agreement. Polarisation curves indicate that 4-MAT is a mixed inhibitor, affecting both cathodic and anodic corrosion currents. Data, obtained from EIS measurements, were analyzed to model the corrosion inhibition process through appropriate equivalent circuit model, a constant phase element (CPE) has been used. The adsorption of 4-MAT on the steel surface, in 1 M HCl solution, obeys to Langmuir’s isotherm with a very high negative value of the free energy of adsorption ΔG°_ads (chemisorption). X-ray photoelectron spectroscopy (XPS) was carried out to establish the mechanism of corrosion inhibition of mild steel in 1 M HCl medium in the presence of 3,5-bis(4-methoxyphenyl)-4-amino-1,2,4-triazole (4-MAT).     

Temperature effect on mild steel corrosion in acid media in presence of azoles

The inhibiting properties of four azoles (indole, benzimidazole, benzotriazole, benzothiazole) were investigated in case of mild steel corrosion in 1 M HCl. The effect of temperature was followed. Impedance spectroscopy, polarization resistance, gravimetric and polarization curves methods were applied. An adequate structural model of the interface in inhibitors presence is offered and the values of the corresponding parameters are calculated. The apparent activation energy of the process taking place in an inhibitor presence was determined on the ground of five temperature values in the range from 20 °C to 60 °C using the data obtained by two independent methods. Comparative investigations were carried out in 1 M H₂SO₄ aiming to elucidate the effect of the acid’s anion. The generalization of the data obtained provided to make conclusions concerning the mechanism of the inhibitors’ adsorption.