Synergistic effect of halide ions on improving corrosion inhibition behaviour of benzisothiozole-3-piperizine hydrochloride on mild steel in 0.5 M H2SO4 medium

The synergistic effect of iodide ions and benzisothiozole-3-piperizine hydrochloride (BITP) on corrosion inhibition of mild steel in 0.5 M H₂SO₄ solution has been studied by both chemical and electrochemical methods. The corrosion performance of BITP in 1.0 M HCl and 0.5 M H₂SO₄ media was examined and compared. The adsorption of BITP and its combination with iodide ions on mild steel surface followed Langmuir adsorption isotherm via chemisorption mechanism. The calculated values of synergism parameter (S_θ) were found to be greater than unity. This result clearly showed the existence of synergism between iodide ions and BITP molecules.     

Synergistic inhibition effect of rare earth cerium(IV) ion and 3,4-dihydroxybenzaldehye on the corrosion of cold rolled steel in H2SO4 solution

The synergistic inhibition effect of rare earth cerium(IV) ion and 3,4-dihydroxybenzaldehye (DHBA) on corrosion of cold rolled steel (CRS) in H₂SO₄ solution was first investigated by weight loss and potentiodynamic polarization methods. Effects of inhibitor concentration, temperature, immersion time and acid concentration on synergism are discussed in detail. The results reveal that DHBA has moderate inhibitive effect and its adsorption obeys Temkin adsorption isotherm. For the cerium(IV) ion, it has negligible effect. However, incorporation of Ce⁴⁺ with DHBA improves the inhibition performance significantly, and produces strong synergistic inhibition effect.     

Synergistic inhibition effect of 6-benzylaminopurine and iodide ion on the corrosion of cold rolled steel in H3PO4 solution

The synergistic inhibition effect of 6-benzylaminopurine (BAP) and iodide ion (I⁻) on the corrosion of cold rolled steel (CRS) in 1.0 M H₃PO₄ solution was studied by weight loss, potentiodynamic polarization curves and electrochemical impedance spectroscopy (EIS) methods. The results show that BAP has a moderate inhibitive effect. However, incorporation of BAP with I⁻ improves the inhibition performance significantly. The adsorption of BAP in the absence and presence of I⁻ obeys Langmuir adsorption isotherm. BAP and BAP/I⁻ mixture act as mixed-type inhibitors. A probable synergism mechanism is proposed.     

Inhibition effect of 6-benzylaminopurine on the corrosion of cold rolled steel in H2SO4 solution

The inhibition effect of 6-benzylaminopurine (BAP) on the corrosion of cold rolled steel (CRS) in 1.0-7.0 M H₂SO₄ at 25-50 °C was studied by weight loss and potentiodynamic polarization methods. Fourier transform infrared spectroscopy (FTIR) and atomic force microscope (AFM) were used to characterize the CRS surface. The results showed that BAP was a good inhibitor in 1.0 M H₂SO₄, and the adsorption of BAP obeyed the Temkin adsorption isotherm. Polarization curves showed that BAP acted as a mixed-type inhibitor in sulfuric acid. Depending on the results, the inhibitive mechanism was proposed.     

Corrosion inhibition of carbon steel in tetra-n-butylammonium bromide aqueous solution by benzotriazole and Na3PO4

The corrosion inhibition behavior of benzotriazole, Na₃PO₄ and their mixture on carbon steel in 20 wt.% (0.628 mol l⁻¹) tetra-n-butylammonium bromide aerated aqueous solution was investigated by weight-loss test, potentiodynamic polarization measurement, electrochemical impedance spectroscopy and scanning electron microscope/energy dispersive X-ray techniques. The inhibition action of BTA or SP or inhibitors mixture on the corrosion of carbon steel is mainly due to the inhibition of anodic process of corrosion. The results revealed that inhibitors mixtures have shown synergistic effects at lower concentration of inhibitors. At 2 g l⁻¹ BTA and 2 g l⁻¹ SP showed optimum enhanced inhibition compared with their individual effects.     

A preliminary investigation of corrosion inhibition of mild steel in 0.5 M H2SO4 by 2-amino-5-(n-pyridyl)-1,3,4-thiadiazole: Polarization, EIS and molecular dynamics simulations

The efficiency, as steel corrosion inhibitors in 0.5 M H₂SO₄, of two thiadiazole derivatives, 2-amino-5-(3-pyridyl)-1,3,4-thiadiazole (3-APTD) and 2-amino-5-(4-pyridyl)-1,3,4-thiadiazole (4-APTD), was investigated by polarization and electrochemical impedance spectroscopy. The protection efficiency increases with increasing inhibitors concentration, but the temperature has hardly effect on the inhibition efficiency of APTD. The adsorption of APTD on iron surface obeys the Langmuir isotherm. The experimental results show that the inhibition efficiency of 4-APTD is higher than that of 3-APTD, and the molecular dynamics (MD) simulations show that the adsorption of 4-APTD on iron surface has the higher binding energy than that of 3-APTD.     

Electrochemical study of corrosion inhibition and adsorption behaviour for pure iron by polyacrylamide in H2SO4: Synergistic effect of iodide ions

Corrosion inhibition and adsorption behaviour for pure iron in 0.5 M H₂SO₄ by polyacrylamide (PA) were investigated using electrochemical techniques. The effect of iodide ion additives was also studied. It was found that inhibition efficiency increased with PA concentration. Corrosion inhibition was afforded by adsorption of PA onto the metal following El-Awady kinetic-thermodynamic adsorption isotherm model via chemisorption mechanism. A mixed inhibition mechanism is proposed for the inhibitive effects of PA as revealed by potentiodynamic polarization technique. A synergistic effect was observed between PA and KI as evident from the values of synergism parameter found to be greater than unity.     

Synergistic inhibition effect of rare earth cerium(IV) ion and anionic surfactant on the corrosion of cold rolled steel in H2SO4 solution

The synergistic inhibition effect of rare earth cerium(IV) ion and anionic surfactant of sodium oleate (C₁₇H₃₃-COONa, SO) on the corrosion of cold rolled steel (CRS) in H₂SO₄ solution was first investigated by weight loss and potentiodynamic polarization methods. The results revealed that SO had a moderate inhibitive effect, and the adsorption of SO obeyed the Freundlich adsorption isotherm. For the cerium(IV) ion, it had a negligible effect. However, incorporation of Ce⁴⁺ with SO significantly improved the inhibition performance, and produced strong synergistic inhibition effect. Depending on the results, the synergism mechanism was proposed.     

The inhibition effect of 2,4,6-tris (2-pyridyl)-1,3,5-triazine on corrosion of tin, indium and tin-indium alloys in hydrochloric acid solution

The influence of 2,4,6-tris (2-pyridyl)-1,3,5-triazine (TPTZ) on the corrosion of tin, indium and tin-indium alloys in 0.5 M HCl solution at different temperatures was studied. Potentiodynamic cathodic polarization and extrapolation of cathodic and anodic Tafel lines techniques were used to obtained experimental data. In the case of tin, the percent inhibition efficiency (IE%) increases as both concentration of TPTZ and temperature are increased. The value of activation energy (E_a) is smaller in the presence of TPTZ than that in uninhibited solution, and decreases with increasing the concentration. However, the effect of TPTZ on indium and the investigated alloys exhibited similar behavior; so, the maximum inhibition efficiency is observed at lowest concentration (10⁻⁶ M) of TPTZ. Then, the value of inhibition efficiency starts to decrease gradually with increasing TPTZ concentration than that of 10⁻⁶ M. But at higher concentration (10⁻³ M) the corrosion current density (I_corr) is still lower than that in uninhibited solution. SEM photographs support that the higher inhibition efficiency is observed at 10⁻⁶ M of TPTZ.The plots of ln K versus 1/T in the presence of the TPTZ in the case of tin, the inhibitor showed linear behavior. The standard enthalpy, ΔH°_ads., entropy, ΔS°_ads. and free energy changes of adsorption ΔG°_ads. were evaluated using Frumkin adsorption isotherm.     

Experimental and molecular dynamics studies on corrosion inhibition of mild steel by 2-amino-5-phenyl-1,3,4-thiadiazole

The corrosion inhibition of mild steel in 0.5 M H₂SO₄ and 1.0 M HCl by 2-amino-5-phenyl-1,3,4-thiadiazole (APT) has been studied using potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) measurements. The results show that the inhibition efficiency increases with the increase of APT concentration in both acids, and the higher inhibition efficiency is obtained in 0.5 M H₂SO₄. The adsorption of APT molecules on the steel surface obeys Langmuir adsorption isotherm in both acids, and occurs spontaneously. The molecular dynamics method has also been used to simulate the adsorption of ATP molecule and solvent ions on the iron surface. The results show that with the adsorption of sulfate ions the Fe + anion + APT system has the higher negative interaction energy comparing to the case of the adsorption of chloride ions.     

Synergistic inhibition behaviour of methylbenzyl quaternary imidazoline derivative and iodide ions on mild steel in H2SO4 solutions

The inhibition behaviour of 2-undecyl-1-ethylamino-1-methylbenzyl quaternary imidazoline (2UMQI) and KI on mild steel in 1.0 M H₂SO₄ solutions was investigated at 25 °C using electrochemical methods. The results indicated that 2UMQI inhibited the corrosion of mild steel and the extent of inhibition increased with 2UMQI concentrations. The inhibition action in the presence of 2UMQI is due to physical adsorption of 2UMQI. A mixed-inhibition mechanism is proposed for the inhibitive effects of 2UMQI. Inhibition efficiency of 2UMQI was enhanced by the addition of iodide ions. In the presence of KI, the potentials of unpolarization, E_u was observed and increased with KI concentration.     

Inhibition of mild steel corrosion in acidic medium using synthetic and naturally occurring polymers and synergistic halide additives

The corrosion inhibition of mild steel in H₂SO₄ in the presence of gum arabic (GA) (naturally occurring polymer) and polyethylene glycol (PEG) (synthetic polymer) was studied using weight loss, hydrogen evolution and thermometric methods at 30-60 °C. PEG was found to be a better inhibitor for mild steel corrosion in acidic medium than GA. The effect of addition of halides (KCl, KBr and KI) was also studied. Results obtained showed that inhibition efficiency (I%) increased with increase in GA and PEG concentration, addition of halides and with increase in temperature. Increase in inhibition efficiency (I%) and degree of surface coverage (θ) was found to follow the trend Cl⁻ < Br⁻ < I⁻ which indicates that the radii and electronegativity of the halide ions play a significant role in the adsorption process. GA and PEG alone and in combination with halides were found to obey Temkin adsorption isotherm. Phenomenon of chemical adsorption is proposed from the trend of inhibition efficiency with temperature and values obtained. The synergism parameter, S_I evaluated is found to be greater than unity indicating that the enhanced inhibition efficiency caused by the addition of halides is only due to synergism.     

Corrosion behavior of alumina ceramics in aqueous HCl and H2SO4 solutions

The corrosion behavior of cold isostatically pressed (CIP) high purity alumina ceramics in aqueous HCl and H₂SO₄ solutions with various concentrations has been studied simultaneously at room temperature (25 °C). Corrosion tests were also performed with 0.65 mol/l HCl and 0.37 mol/l H₂SO₄ solutions at 40, 55 and 70 °C for 48 h. Chemical stability was monitored by determining the amount of Al³⁺, Mg²⁺, Ca²⁺, Na⁺ Si⁴⁺ and Fe³⁺ ions eluted in different concentrations of HCl and H₂SO₄ solutions by means of atomic absorption spectrometry (AAS). By increasing the concentration from 0.37 to 6.5 mol/l, it was notified that the corrosion susceptibility in HCl and H₂SO₄ solutions for the CIP alumina specimens at room temperature decreases.     

Synergistic inhibition effect of rare earth cerium(IV) ion and sodium oleate on the corrosion of cold rolled steel in phosphoric acid solution

The synergistic inhibition effect of rare earth cerium(IV) ion (Ce⁴⁺) and sodium oleate (SO) on the corrosion of cold rolled steel (CRS) in 3.0 M phosphoric acid (H₃PO₄) has been investigated by weight loss, potentiodynamic polarization, electrochemical impedance spectroscopy (EIS) and scanning electron microscope (SEM) methods. The results reveal that SO has a moderate inhibitive effect and its adsorption obeys Temkin adsorption isotherm. Ce⁴⁺ has a poor effect. However, incorporation of Ce⁴⁺ with SO improves the inhibition performance significantly, and exhibits synergistic inhibition effect. SO acts as a cathodic inhibitor, while SO/Ce⁴⁺ mixture acts as a mixed-type inhibitor.     

Corrosion control of mild steel using 3,5-bis(4-methoxyphenyl)-4-amino-1,2,4-triazole in normal hydrochloric acid medium

The inhibition performance of the 3,5-bis(4-methoxyphenyl)-4-amino-1,2,4-triazole (4-MAT) on mild steel in normal hydrochloric acid medium (1 M HCl) at 30 °C was tested by weight loss, potentiodynamic polarisation and electrochemical impedance spectroscopy (EIS) techniques. This organic compound inhibits the acidic corrosion even at very low concentration, reaching a value of inhibition efficiency up to 98% at a concentration of 3 × 10⁻⁴ M. The results obtained from the different corrosion evaluation techniques are in good agreement. Polarisation curves indicate that 4-MAT is a mixed inhibitor, affecting both cathodic and anodic corrosion currents. Data, obtained from EIS measurements, were analyzed to model the corrosion inhibition process through appropriate equivalent circuit model, a constant phase element (CPE) has been used. The adsorption of 4-MAT on the steel surface, in 1 M HCl solution, obeys to Langmuir’s isotherm with a very high negative value of the free energy of adsorption ΔG°_ads (chemisorption). X-ray photoelectron spectroscopy (XPS) was carried out to establish the mechanism of corrosion inhibition of mild steel in 1 M HCl medium in the presence of 3,5-bis(4-methoxyphenyl)-4-amino-1,2,4-triazole (4-MAT).     

Electrochemical behaviour of Cu-40Zn in 3% NaCl solution polluted by sulphides: Effect of aminotriazole

The electrochemical behaviour of Cu-40Zn alloy, in 3% NaCl medium pure and polluted by 2 ppm of S²⁻ ions, has been studied in the absence and presence of the 3-amino-1,2,4 triazole (ATA) as corrosion inhibitor. Electrochemical measurements (polarisation curves and electrochemical impedance spectroscopy) showed that sulphides accelerate the alloy corrosion. The studies revealed that ATA inhibits both cathodic and anodic reactions, indicating a mixed type of inhibition. The inhibiting effect was higher in presence of S²⁻ ions than in its absence. Scanning electron microscopy analysis showed that the inhibitor acts by preventing the adsorption of S²⁻ ions, and formation of Cu₂S at the alloy surface. The inhibition efficiency reaches 98% at a concentration of 5 × 10⁻³ M.     

Inhibiting effects of butyl triphenyl phosphonium bromide on corrosion of mild steel in 0.5 M sulphuric acid solution and its adsorption characteristics

Butyl triphenyl phosphonium bromide (BuTPPB) has been evaluated as a corrosion inhibitor for mild steel in 0.5 M H₂SO₄ solutions using galvanostatic polarisation and potentiostatic polarisation measurements. The study was also complemented by infra red (IR) spectroscopy, scanning electron microscopy (SEM) and quantum chemical calculations. Galvanostatic polarisation measurements showed that the presence of BuTPPB in aerated 0.5 M H₂SO₄ solutions decreases corrosion currents to a great extent and the corrosion rate decreases with increasing inhibitor concentration at a constant temperature. At 298K, inhibition efficiency was found to be 94.5% for 10⁻⁷ M BuTPPB which increased to about 99% for the BuTPPB concentration of 10⁻² M. The effect of temperature on the corrosion behaviour of mild steel was studied at five different temperatures ranging from 298 to 338K. The polarisation curves clearly indicate that BuTPPB acts as a mixed type inhibitor. Adsorption of BuTPPB on the mild steel surface follows the Langmuir isotherm.Potentiostatic polarisation measurements showed that passivation was observed only for lower BuTPPB concentrations (10⁻⁵ and 10⁻⁷ mol l⁻¹) for the mild steel in 0.5 M H₂SO₄. IR and SEM investigations also confirmed the adsorption of BuTPPB on the mild steel surface in 0.5 M H₂SO₄ solutions. The molecular parameters obtained using PM3 semi-empirical method, were correlated with the experimentally measured inhibitor efficiencies.     

Evaluation of some non-toxic thiadiazole derivatives as bronze corrosion inhibitors in aqueous solution

The inhibiting effect of four innoxious thiadiazole derivatives (2-mercapto-5-amino-1,3,4-thiadiazole (MAT), 2-mercapto-5-acetylamino-1,3,4-thiadiazole (MAcAT), 2-mercapto-5-methyl-1,3,4-thiadiazole (MMeT) and 2-mercapto-5-phenylamino-1,3,4-thiadiazole (MPhAT)) on bronze corrosion in an aerated solution of 0.2 g L⁻¹ Na₂SO₄ + 0.2 g L⁻¹ NaHCO₃ at pH 5 was studied by potentiodynamic voltammetry and electrochemical impedance spectroscopy.The corrosion parameters determined from the polarisation curves indicate that the addition of the investigated thiadiazole derivatives decreases both cathodic and anodic current densities, due to an inhibition of the corrosion process, through the adsorption of thiadiazoles on the bronze surface. The inhibiting effect of the investigated organic compounds appears to be more pronounced on the anodic process than on the cathodic one and, except for the case MPhAT, it is enhanced by the increases of the inhibitors’ concentration.The adsorption of the thiadiazole derivatives on bronze was confirmed by the presence of the nitrogen atoms in the EDX spectra of the bronze exposed to inhibitor-containing solutions.The magnitude of polarisation resistance values and, consequently, the inhibition efficiencies are influenced by the molecular structure of thiadiazole derivatives. The strongest inhibition was noticed in the presence of compounds with phenyl amino- or amino-functionalities in their molecules. The maximum protection efficiencies were obtained by addition of: 5 mM MAT (95.9%), 1 mM MAcAT (95.7%), 5 mM MMeT (92.6%) and 0.1 mM MPhAT (97%). EIS measurements also revealed that the inhibitor effectiveness of the optimal concentrations of thiadiazole is time-dependent.     

The characterisation of the protective film formed by benzotriazole on the 90/10 copper-nickel alloy surface in H2SO4 media

The nature of the protective film formed by benzotriazole (BTAH) on the surface of the 90/10 CuNi alloy in deaerated 0.5 mol L⁻¹ H₂SO₄ solution containing Fe(III) ions as oxidant was investigated by weight-loss, calorimetric measurements, and by surface-enhanced Raman spectroscopy (SERS). The SERS measurements show that the protective film is composed by the [Cu(I)BTA]_n polymeric complex and that the BTAH molecules are also adsorbed on the electrode surface. A modification of the BET isotherm for adsorption of gases in solids is proposed to describe the experimental results obtained from weight-loss experiments that suggest an adsorption in multilayers. Electrochemical studies of copper and nickel in 0.5 mol L⁻¹ H₂SO₄ in presence and absence of BTAH have also been made as an aid to interpret the results. The calculated adsorption free energy of the cuprous benzotriazolate on the surface of the alloy is in accordance with the value for pure copper.     

N-Phenylcinnamimide and some of its derivatives as inhibitors for corrosion of lead in HCl solutions

The anodic and cathodic polarization behavior of lead electrode was studied galvanostatically in HCl solutions of various concentrations. Increasing the acid concentration enhances the rate of the anodic dissolution of the metal and the rate of hydrogen evolution reaction, with anodic and cathodic Tafel slopes equal to 30 and 115 ± 5 mV decade⁻¹, respectively. The effect of addition of N-phenylcinnamimide and some of its derivatives, N-(p-nitrophenyl)cinnamimide, N-(p-methylphenyl)cinnamimide, and N-(p-methoxyphenyl)cinnamimide, as inhibitors on the kinetic of the anodic and cathodic reactions of lead in 0.1 M HCl solutions was also studied. These compounds inhibit both the rate of anodic dissolution and the rate of hydrogen evolution reactions without affecting the Tafel slopes. This result indicates that the used compounds were of mixed-type. The inhibition efficiency of these additives increases in the order: N-(p-nitrophenyl)cinnamimide < N-phenylcinnamimide < N-(p-methylphenyl)cinnamimide < N-(p-methoxyphenyl)cinnamimide. The equilibrium constant and the free energy of adsorption process have been calculated and discussed.