Corrosion inhibition of mild steel by ethylamino imidazoline derivative in CO2-saturated solution

The corrosion inhibition and adsorption behaviour of 2-undecyl-1-ethylamino imidazoline (2UEI) on N80 mild steel in CO₂-saturated 3% NaCl solutions was investigated using potentiodynamic polarization, electrochemical impedance spectroscopy techniques and SEM observation. Inhibitor efficiency increased with increase in 2UEI concentration. Temperature studies revealed an increase in inhibition efficiency with rise in temperature and corrosion activation energies decreased in the presence of 2UEI. A mechanism of chemical adsorption of 2UEI on the metal’s surface is proposed. The adsorption characteristics of the inhibitor were approximated by Temkin isotherm. The inhibition efficiency of 2UEI was enhanced in the presence of iodide ions.     

The effect of temperature and concentration on the corrosion inhibition mechanism of an amphiphilic amido-amine in CO2 saturated solution

The corrosion inhibition mechanism of the N-[2-[(2-aminoethyl)amino]ethyl]-9-octadecenamide on mild steel surface in CO₂-saturated 5% NaCl solution has been studied. The inhibition efficiency decreases with increasing temperature. Adsorption of the inhibitor studied is found to follow the Frumkin adsorption isotherm. EIS results show that the mechanism of its corrosion inhibition at concentrations higher than critical micelle concentration is by forming a protective porous bi-layer. The activation energy, thermodynamic parameters and electrochemical results reveal a change in the adsorption mode of the inhibitor studied: the inhibitor could primarily be physically adsorbed at low concentrations, while chemisorption is favoured as concentration increases.     

Synergistic inhibition behaviour of methylbenzyl quaternary imidazoline derivative and iodide ions on mild steel in H2SO4 solutions

The inhibition behaviour of 2-undecyl-1-ethylamino-1-methylbenzyl quaternary imidazoline (2UMQI) and KI on mild steel in 1.0 M H₂SO₄ solutions was investigated at 25 °C using electrochemical methods. The results indicated that 2UMQI inhibited the corrosion of mild steel and the extent of inhibition increased with 2UMQI concentrations. The inhibition action in the presence of 2UMQI is due to physical adsorption of 2UMQI. A mixed-inhibition mechanism is proposed for the inhibitive effects of 2UMQI. Inhibition efficiency of 2UMQI was enhanced by the addition of iodide ions. In the presence of KI, the potentials of unpolarization, E_u was observed and increased with KI concentration.     

N-Aminorhodanine as an effective corrosion inhibitor for mild steel in 0.5 M H2SO4

The corrosion inhibition effect of N-aminorhodanine (N-AR) on mild steel (MS) in 0.5 M H₂SO₄ was studied in both short and long immersion duration using potentiodynamic polarization, electrochemical impedance spectroscopy (EIS), linear polarization resistance (LPR), chronoamperometry and hydrogen gas evolution. The surface morphology of MS was examined with scanning electron microscopy (SEM) in absence and presence inhibitor. The inhibitor adsorption process on MS surfaces obeys the Langmuir adsorption isotherm. The results show that NAR is a good inhibitor for MS in the acidic medium. The inhibition efficiency obtained from potentiodynamic polarization, EIS and LPR up to 98% is determined.     

The effect of molybdate concentration and hydrodynamic effect on mild steel corrosion inhibition in simulated cooling water

The effects of two important factors namely concentration and hydrodynamics on the inhibition efficiency of molybdate were investigated using potentiodynamic polarization and electrochemical impedance spectroscopy tests. Results showed that molybdate was capable of inhibiting the corrosion of mild steel in simulated cooling water. The inhibition efficiency of molybdate was increased with increasing both its concentration and water circulation velocity. These two factors seem to promote the adsorption of molybdate and oxygen ions on the metal surface, leading to the formation of a protective layer with a greater charge transfer resistance and lower permeability. A model is also proposed which facilitates the probable mechanism of inhibition.     

Evaluation of cavitation erosion–corrosion degradation of mild steel by means of dynamic impedance spectroscopy in galvanostatic mode

Cavitation erosion and corrosion of mild steel was studied by means of a vibratory facility in 3% w/w NaCl solution. Dynamic Electrochemical Impedance Spectroscopy (DEIS) measurements were carried out in the galvanostatic mode to allow on-line monitoring of impedance parameters in cavitation failure. The results, based on an analysis of instantaneous impedance spectra, correspond to degradation under the influence of cavitation erosion–corrosion. It has been shown that a change of pseudo-capacitance corresponds to an increase in sample roughness, while the charge-transfer resistance determines changes in the corrosion rate under the combined mechanical and electrochemical factors.     

Electrochemical and surface analysis studies on corrosion inhibition of Q235 steel by imidazoline derivative against CO2 corrosion

The inhibition performance of a newly synthesized thioureido imidazoline inhibitor (TAI) in CO₂ corrosion was studied by using electrochemical impedance spectroscopy (EIS), atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS). Results show that the values of inhibition efficiency show peak-value-phenomenon at concentration of 0.15 mmol dm⁻³ owing to the change of adsorption mode. The adsorption of protonated TAI molecules on the negatively charged steel surface makes the potential of zero charge (PZC) shift to positive direction, and the long-range electrostatic exclusive forces between AFM tip and sample surface are reduced by screening effect of surface charges.     

Synergistic effect of halide ions on improving corrosion inhibition behaviour of benzisothiozole-3-piperizine hydrochloride on mild steel in 0.5 M H2SO4 medium

The synergistic effect of iodide ions and benzisothiozole-3-piperizine hydrochloride (BITP) on corrosion inhibition of mild steel in 0.5 M H₂SO₄ solution has been studied by both chemical and electrochemical methods. The corrosion performance of BITP in 1.0 M HCl and 0.5 M H₂SO₄ media was examined and compared. The adsorption of BITP and its combination with iodide ions on mild steel surface followed Langmuir adsorption isotherm via chemisorption mechanism. The calculated values of synergism parameter (S_θ) were found to be greater than unity. This result clearly showed the existence of synergism between iodide ions and BITP molecules.     

The inhibition of mild steel corrosion in acidic medium by 1-methyl-3-pyridin-2-yl-thiourea

The effect of 1-methyl-3-pyridin-2-yl-thiourea on the corrosion resistance of mild steel in H₂SO₄ solution was investigated by different techniques. The results show that the inhibition efficiency increases with the increase of inhibitor concentration. This compound affects both the anodic dissolution of steel and the hydrogen evolution reaction in 0.5 M H₂SO₄. The adsorption of this inhibitor is also found to obey the Langmuir adsorption isotherm. From the adsorption isotherm, value of the ΔG_ads for the adsorption process was calculated. From the corrosion rate obtained at 25-45 ± 1 °C E_a, ΔH_a and possible mechanism have been proposed.     

Experimental and theoretical studies for mild steel corrosion inhibition in 1 M HCl by two new benzothiazine derivatives

The inhibition effect of new heterocyclic compounds, namely 2-aryl-benzothiazin-3-one (P1) and 3-aryl-benzothiazin-2-one (P2) on mild steel corrosion in 1 M HCl was investigated using electrochemical measurements. The results indicated that the inhibition efficiency depends on concentration and molecular structure of the investigated compounds. It is also found that the inhibition of P1 is greater than P2. The molecular structure effect on the corrosion inhibition efficiency was investigated using DFT calculations. The structural and electronic parameters were calculated and discussed. The obtained results show that the experimental and theoretical studies agree well and confirm that P1 is the better inhibitor.     

Benzimidazole and its derivatives as corrosion inhibitors for mild steel in 1M HCl solution

In this paper, the inhibition ability of benzimidazole and its derivatives against the corrosion of mild steel in 1M HCl solution was studied. The change of impedance parameters observed by variation of inhibitors concentration within the range of 50-250 ppm was an indication of their adsorption. The thermodynamic adsorption parameters proposed that these inhibitors retard both cathodic and anodic processes through physical adsorption and blocking the active corrosion sites. The adsorption of these compounds obeyed the Langmuir’s adsorption isotherm. The inhibition efficiency was increased with inhibitor concentration in the order of 2-mercaptobenzimidazole > 2-methylbenzimidazole > benzimidazole, which is in accordance with the variation of apparent activation energy of corrosion.     

Polybenzoxazine/SiO2 nanocomposite coatings for corrosion protection of mild steel

A series of nanocomposite coatings (PBS) consisting of silane functional polybenzoxazine (PB-TMOS) and SiO₂ nanoparticles were developed for corrosion protection of mild steel. The influence of silica content on corrosion resistance of PBS coatings was investigated by electrochemical measurements. The surface chemistry of nanoparticles and its effect on morphology of the PBS coating was also studied utilizing Fourier Transforms Infrared Spectroscopy, ²⁹Si Nuclear Magnetic Resonance and Scanning Electron Microscopy analyses. The results indicate that the presence of the covalent bond between nanoparticles and PB-TMOS, greatly improves the interfacial interactions at the polymer/filler interfaces resulting in a better corrosion performance.     

Synergistic effect of polyaspartic acid and iodide ion on corrosion inhibition of mild steel in H2SO4

The inhibition effect of polyaspartic acid (PASP) and its synergistic effect with KI on mild steel corrosion in 0.5 M H₂SO₄ solution are studied by weight loss and electrochemical methods. The inhibition efficiency increases with the concentration of PASP and increases further with the presence of 1 mM KI. Result of the zero charge potential measurement shows that iodide ion promotes the film formation of PASP greatly. The mild steel surfaces after immersion test were analyzed using scanning electron microscopy and X-ray photoelectron spectroscopy. An adsorption model is proposed to elucidate the synergistic mechanism of synergistic effect.     

A preliminary investigation of corrosion inhibition of mild steel in 0.5 M H2SO4 by 2-amino-5-(n-pyridyl)-1,3,4-thiadiazole: Polarization, EIS and molecular dynamics simulations

The efficiency, as steel corrosion inhibitors in 0.5 M H₂SO₄, of two thiadiazole derivatives, 2-amino-5-(3-pyridyl)-1,3,4-thiadiazole (3-APTD) and 2-amino-5-(4-pyridyl)-1,3,4-thiadiazole (4-APTD), was investigated by polarization and electrochemical impedance spectroscopy. The protection efficiency increases with increasing inhibitors concentration, but the temperature has hardly effect on the inhibition efficiency of APTD. The adsorption of APTD on iron surface obeys the Langmuir isotherm. The experimental results show that the inhibition efficiency of 4-APTD is higher than that of 3-APTD, and the molecular dynamics (MD) simulations show that the adsorption of 4-APTD on iron surface has the higher binding energy than that of 3-APTD.     

Corrosion and corrosion control of mild steel in concentrated H2SO4 solutions by a newly synthesized glycine derivative

A newly synthesized glycine derivative (GlyD1), 2-(4-(dimethylamino)benzylamino)acetic acid hydrochloride, was used to control mild steel corrosion in 4.0 M H₂SO₄ solutions at different temperatures (278–338 K). Tafel extrapolation, linear polarization resistance (LPR) and impedance methods were used to test corrosion inhibitor efficiency. An independent method of chemical analysis, namely ICP-AES (inductively coupled plasma atomic emission spectrometry) was also used to test validity of corrosion rate measured by Tafel extrapolation method. Results obtained were compared with an available glycine derivative (GlyD2) and glycine (Gly). Tafel polarization measurements revealed that the three tested inhibitors function as mixed-type compounds. The inhibition efficiency increased with increase in inhibitor concentration and decreased with temperature, suggesting the occurrence of physical adsorption. The adsorptive behaviour of the three inhibitors followed Temkin-type isotherm and the standard free energy changes of adsorption () were evaluated for the three tested inhibitors as a function of temperature. The inhibition performance of GlyD1 was much better than those of GlyD2 and Gly itself. Results obtained from the different corrosion evaluation techniques were in good agreement.     

Experimental and molecular dynamics studies on corrosion inhibition of mild steel by 2-amino-5-phenyl-1,3,4-thiadiazole

The corrosion inhibition of mild steel in 0.5 M H₂SO₄ and 1.0 M HCl by 2-amino-5-phenyl-1,3,4-thiadiazole (APT) has been studied using potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) measurements. The results show that the inhibition efficiency increases with the increase of APT concentration in both acids, and the higher inhibition efficiency is obtained in 0.5 M H₂SO₄. The adsorption of APT molecules on the steel surface obeys Langmuir adsorption isotherm in both acids, and occurs spontaneously. The molecular dynamics method has also been used to simulate the adsorption of ATP molecule and solvent ions on the iron surface. The results show that with the adsorption of sulfate ions the Fe + anion + APT system has the higher negative interaction energy comparing to the case of the adsorption of chloride ions.     

Tryptamine as a corrosion inhibitor of mild steel in hydrochloric acid solution

The inhibitor effect of tryptamine on the corrosion of mild steel in 0.5 M hydrochloric acid at 30 °C was investigated using linear polarization, potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) techniques. The inhibition efficiency increases with an increase in concentration of tryptamine. At 500 ppm tryptamine the inhibition efficiency calculated by these techniques is around 97%. Cathodic and anodic polarization curves of mild steel in the presence of different concentrations of tryptamine at 30 °C reveal that it is a mixed type inhibitor. Tryptamine follows Langmuir adsorption with adsorption free energy of −35.07 kJ mol⁻¹.     

Electrochemical and quantum chemical studies of 3,4-dihydropyrimidin-2(1H)-ones as corrosion inhibitors for mild steel in hydrochloric acid solution

The inhibition effect of 3,4-dihydropyrimidin-2(1H)-ones (DHPMs) on the corrosion of mild steel in hydrochloric acid medium has been investigated using weight loss measurements, electrochemical impedance spectroscopy, potentiodynamic polarization and quantum chemical study. Among the compounds studied, DHPM-3 exhibited the best inhibition efficiency η (%) 99% at 10 mg L⁻¹ at 308 K. Polarization measurements indicate that all the examined compounds are of mixed-type inhibitor. The adsorption of studied compounds obeyed the Langmuir’s adsorption isotherm. The electronic properties obtained using quantum chemical approach, were correlated with the experimental inhibition efficiencies.     

Investigation of corrosion inhibition mechanism and stability of Vitamin B1 on mild steel in 0.5 M HCl solution

The corrosion inhibition mechanism and the stability of Vitamin B1 (VitB1) on mild steel in 0.5 M HCl solution were investigated. Surface of the steel after exposing to test solutions were examined by scanning electron microscopy (SEM), atomic force microscopy (AFM), and energy dispersive X-ray spectroscopy (EDX). The stability of the inhibitor film was investigated by electrochemical impedance spectroscopy (EIS), chronoamperometry (CA), and cyclic voltammetry (CV) techniques. It was found that VitB1 acts by adsorption on mild steel via physical and chemical interactions and a protective film formation. The inhibitor film evenly distributes over the steel surface and is stable.     

Schiff bases of increasing complexity as mild steel corrosion inhibitors in 2 M HCl

The effect of three Schiff base compounds with increasing number of coordination sites, namely, 2-{(E)-[(2-hydroxyethyl)imino]methyl} phenol (I), 2-[(E)-({2-[(2-hydroxyethyl)amino]ethyl}imino)methyl]phenol (II) and 2,2′-{iminobis[ethane-2,1-diylnitrilo(E)methylylidene]}diphenol (III) have been investigated at 298 K by weight loss measurements, potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) methods. The inhibition efficiencies obtained from all methods employed are in good agreement. Results show compound III to be the best inhibitor with a mean efficiency of 93% at 10⁻² M additive concentration. Studies showed all three compounds to act as mixed type inhibitors.