Synergism between red tetrazolium and uracil on the corrosion of cold rolled steel in H2SO4 solution

The synergism between red tetrazolium (RT) and uracil (Ur) on the corrosion of cold rolled steel (CRS) in H₂SO₄ solution is first investigated by weight loss, potentiodynamic polarization, and atomic force microscope (AFM). Effects of inhibitor concentration (25-500 mg l⁻¹), temperature (20-50 °C), and acid concentration (1.0-5.0 M) on synergism are discussed systematically. The results reveal that RT has a moderate inhibitive effect, and its adsorption obeys the Freundlich adsorption isotherm. For Ur, it has a poor effect. However, incorporation of RT with Ur significantly improves the inhibition performance, and produces synergistic inhibition effect.     

Alizarin violet 3B as a novel corrosion inhibitor for steel in HCl, H2SO4 solutions

The inhibition effect of alizarin violet 3B (AV3B) on the corrosion of cold rolled steel (CRS) in 1.0 M HCl and 0.5 M H₂SO₄ solutions was investigated for the first time by weight loss, potentiodynamic polarization curves and electrochemical impedance spectroscopy (EIS) methods. The results show that AV3B is a good inhibitor, and exhibits more efficient in 1.0 M HCl than 0.5 M H₂SO₄. The adsorption of AV3B on CRS surface obeys Langmuir adsorption isotherm in both acids. Polarization curves reveal that AV3B acts as a mixed-type inhibitor.     

Triazolyl blue tetrazolium bromide as a novel corrosion inhibitor for steel in HCl and H2SO4 solutions

The inhibition effect of triazolyl blue tetrazolium bromide (TBTB) on the corrosion of cold rolled steel (CRS) in 1.0 M HCl and 0.5 M H₂SO₄ solution was investigated for the first time by weight loss, potentiodynamic polarization curves, and electrochemical impedance spectroscopy (EIS) methods. The results show that TBTB is a very good inhibitor, and is more efficiency in 1.0 M HCl than 0.5 M H₂SO₄. The adsorption of TBTB on CRS surface obeys Langmuir adsorption isotherm. Polarization curves reveal that TBTB acts as a mixed-type inhibitor in both acids.     

Three pyrazine derivatives as corrosion inhibitors for steel in 1.0 M H2SO4 solution

The inhibition effect of three pyrazine derivatives of 2-methylpyrazine (MP), 2-aminopyrazine (AP) and 2-amino-5-bromopyrazine (ABP) on the corrosion of cold rolled steel (CRS) in 1.0 M H₂SO₄ solution was studied by weight loss, potentiodynamic polarization curves and electrochemical impedance spectroscopy (EIS) methods. The results show that all pyrazine compounds are good inhibitors, and inhibition efficiency follows the order: ABP > AP > MP. The adsorption of each inhibitor on CRS surface obeys Langmuir adsorption isotherm. For all these pyrazine derivatives, they act as mixed-type inhibitors. The probable inhibitive mechanism is proposed from the viewpoint of adsorption theory.     

Synergistic effect of halide ions on improving corrosion inhibition behaviour of benzisothiozole-3-piperizine hydrochloride on mild steel in 0.5 M H2SO4 medium

The synergistic effect of iodide ions and benzisothiozole-3-piperizine hydrochloride (BITP) on corrosion inhibition of mild steel in 0.5 M H₂SO₄ solution has been studied by both chemical and electrochemical methods. The corrosion performance of BITP in 1.0 M HCl and 0.5 M H₂SO₄ media was examined and compared. The adsorption of BITP and its combination with iodide ions on mild steel surface followed Langmuir adsorption isotherm via chemisorption mechanism. The calculated values of synergism parameter (S_θ) were found to be greater than unity. This result clearly showed the existence of synergism between iodide ions and BITP molecules.     

Synergistic inhibition effect of 6-benzylaminopurine and iodide ion on the corrosion of cold rolled steel in H3PO4 solution

The synergistic inhibition effect of 6-benzylaminopurine (BAP) and iodide ion (I⁻) on the corrosion of cold rolled steel (CRS) in 1.0 M H₃PO₄ solution was studied by weight loss, potentiodynamic polarization curves and electrochemical impedance spectroscopy (EIS) methods. The results show that BAP has a moderate inhibitive effect. However, incorporation of BAP with I⁻ improves the inhibition performance significantly. The adsorption of BAP in the absence and presence of I⁻ obeys Langmuir adsorption isotherm. BAP and BAP/I⁻ mixture act as mixed-type inhibitors. A probable synergism mechanism is proposed.     

Nitrotetrazolium blue chloride as a novel corrosion inhibitor of steel in sulfuric acid solution

The inhibition effect of nitrotetrazolium blue chloride (NTBC) on the corrosion of cold rolled steel (CRS) in 0.5 M H₂SO₄ was investigated by weight loss, potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) methods. The results show that NTBC is a good inhibitor, and the adsorption of NTBC on CRS surface obeys Langmuir adsorption isotherm. Polarization curves show that NTBC acts as a mixed-type inhibitor. EIS spectra consist of large capacitive loop at high frequencies followed by a small inductive one at low frequency values, and charge transfer resistance increases with the inhibitor concentration.     

Experimental and molecular dynamics studies on corrosion inhibition of mild steel by 2-amino-5-phenyl-1,3,4-thiadiazole

The corrosion inhibition of mild steel in 0.5 M H₂SO₄ and 1.0 M HCl by 2-amino-5-phenyl-1,3,4-thiadiazole (APT) has been studied using potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) measurements. The results show that the inhibition efficiency increases with the increase of APT concentration in both acids, and the higher inhibition efficiency is obtained in 0.5 M H₂SO₄. The adsorption of APT molecules on the steel surface obeys Langmuir adsorption isotherm in both acids, and occurs spontaneously. The molecular dynamics method has also been used to simulate the adsorption of ATP molecule and solvent ions on the iron surface. The results show that with the adsorption of sulfate ions the Fe + anion + APT system has the higher negative interaction energy comparing to the case of the adsorption of chloride ions.     

Inhibiting effects of butyl triphenyl phosphonium bromide on corrosion of mild steel in 0.5 M sulphuric acid solution and its adsorption characteristics

Butyl triphenyl phosphonium bromide (BuTPPB) has been evaluated as a corrosion inhibitor for mild steel in 0.5 M H₂SO₄ solutions using galvanostatic polarisation and potentiostatic polarisation measurements. The study was also complemented by infra red (IR) spectroscopy, scanning electron microscopy (SEM) and quantum chemical calculations. Galvanostatic polarisation measurements showed that the presence of BuTPPB in aerated 0.5 M H₂SO₄ solutions decreases corrosion currents to a great extent and the corrosion rate decreases with increasing inhibitor concentration at a constant temperature. At 298K, inhibition efficiency was found to be 94.5% for 10⁻⁷ M BuTPPB which increased to about 99% for the BuTPPB concentration of 10⁻² M. The effect of temperature on the corrosion behaviour of mild steel was studied at five different temperatures ranging from 298 to 338K. The polarisation curves clearly indicate that BuTPPB acts as a mixed type inhibitor. Adsorption of BuTPPB on the mild steel surface follows the Langmuir isotherm.Potentiostatic polarisation measurements showed that passivation was observed only for lower BuTPPB concentrations (10⁻⁵ and 10⁻⁷ mol l⁻¹) for the mild steel in 0.5 M H₂SO₄. IR and SEM investigations also confirmed the adsorption of BuTPPB on the mild steel surface in 0.5 M H₂SO₄ solutions. The molecular parameters obtained using PM3 semi-empirical method, were correlated with the experimentally measured inhibitor efficiencies.     

The inhibition of mild steel corrosion in acidic medium by 1-methyl-3-pyridin-2-yl-thiourea

The effect of 1-methyl-3-pyridin-2-yl-thiourea on the corrosion resistance of mild steel in H₂SO₄ solution was investigated by different techniques. The results show that the inhibition efficiency increases with the increase of inhibitor concentration. This compound affects both the anodic dissolution of steel and the hydrogen evolution reaction in 0.5 M H₂SO₄. The adsorption of this inhibitor is also found to obey the Langmuir adsorption isotherm. From the adsorption isotherm, value of the ΔG_ads for the adsorption process was calculated. From the corrosion rate obtained at 25-45 ± 1 °C E_a, ΔH_a and possible mechanism have been proposed.     

On the inhibition of mild steel corrosion by 4-amino-5-phenyl-4H-1, 2, 4-trizole-3-thiol

The corrosion inhibition of mild steel in a 2.5 M H₂SO₄ solution by 4-amino-5-phenyl-4H-1, 2, 4-trizole-3-thiol (APTT) was studied at different temperatures, utilising open circuit potential, potentiodynamic and impedance measurements. The results indicate that APTT performed as an excellent mixed-type inhibitor for mild steel corrosion in a 2.5 M H₂SO₄ solution and that the inhibition efficiencies increased with the inhibitor concentration but decreased proportionally with temperature. The kinetic and thermodynamic parameters for adsorption of APTT on the mild steel surface were calculated. A chemisorption mechanism of APTT molecules on the mild steel surface was proposed based on the thermodynamic adsorption parameters.     

Synergistic inhibition behaviour of methylbenzyl quaternary imidazoline derivative and iodide ions on mild steel in H2SO4 solutions

The inhibition behaviour of 2-undecyl-1-ethylamino-1-methylbenzyl quaternary imidazoline (2UMQI) and KI on mild steel in 1.0 M H₂SO₄ solutions was investigated at 25 °C using electrochemical methods. The results indicated that 2UMQI inhibited the corrosion of mild steel and the extent of inhibition increased with 2UMQI concentrations. The inhibition action in the presence of 2UMQI is due to physical adsorption of 2UMQI. A mixed-inhibition mechanism is proposed for the inhibitive effects of 2UMQI. Inhibition efficiency of 2UMQI was enhanced by the addition of iodide ions. In the presence of KI, the potentials of unpolarization, E_u was observed and increased with KI concentration.     

2,2′-Dithiobis(3-cyano-4,6-dimethylpyridine): A new class of acid corrosion inhibitors for mild steel

The title compound (PyS)₂ has been synthesized and its inhibiting action on the corrosion of mild steel in 1-5 M H₂SO₄ solutions at 35-50 °C has been investigated by polarization resistance (R_p), polarization curves and electrochemical impedance spectroscopy (EIS). (PyS)₂ showed excellent performance and its efficiency did not affect either by increasing the acid concentration or rise of temperature. Polarization curves indicated that (PyS)₂ behaves mainly as anodic inhibitor in 1 M H₂SO₄ solutions and as a mixed-type inhibitor in 3 and 5 M H₂SO₄ solutions at different temperatures. Adsorption of (PyS)₂ on the steel surface followed Temkin’s adsorption isotherm with a very high negative value of the free energy of adsorption . The activation parameters of the corrosion process were calculated. EIS showed that the charge transfer controls the corrosion process in the uninhibited and inhibited solutions.     

Inhibition by Ginkgo leaves extract of the corrosion of steel in HCl and H2SO4 solutions

The inhibition effect of Ginkgo leaves extract (GLE) on the corrosion of cold rolled steel (CRS) in 1.0–5.0 M HCl and 0.5–2.5 M H₂SO₄ solutions was investigated for the first time by weight loss, potentiodynamic polarization curves, electrochemical impedance spectroscopy (EIS) and scanning electron microscopy (SEM) methods. The results show that GLE is a good inhibitor, and exhibits more efficient in 1.0 M HCl than 0.5 M H₂SO₄. The adsorption of GLE on CRS surface obeys Langmuir adsorption isotherm. GLE acts as a mixed-type inhibitor in 1.0 M HCl, while a cathodic inhibitor in 0.5 M H₂SO₄.     

Bis (benzimidazol-2-yl) disulphide: An efficient water soluble inhibitor for corrosion of mild steel in acid media

The inhibition effect of Bis (benzimidazol-2-yl) disulphide (BIMDS) on corrosion behavior of mild steel (MS) in 1.0 M HCl and 0.5 M H₂SO₄ was studied using different techniques. These studies have shown that studied compound is a good inhibitor for MS in 1.0 M HCl and 0.5 M H₂SO₄ solutions. Inhibitor showed better performance in 0.5 M H₂SO₄ solutions than 1.0 M HCl. Polarization measurements indicated that BIMDS is a mixed-type inhibitor in both acid media. Adsorption of inhibitor molecules on the mild steel surface showed Langmuir isotherm model in both acid media.     

A preliminary investigation of corrosion inhibition of mild steel in 0.5 M H2SO4 by 2-amino-5-(n-pyridyl)-1,3,4-thiadiazole: Polarization, EIS and molecular dynamics simulations

The efficiency, as steel corrosion inhibitors in 0.5 M H₂SO₄, of two thiadiazole derivatives, 2-amino-5-(3-pyridyl)-1,3,4-thiadiazole (3-APTD) and 2-amino-5-(4-pyridyl)-1,3,4-thiadiazole (4-APTD), was investigated by polarization and electrochemical impedance spectroscopy. The protection efficiency increases with increasing inhibitors concentration, but the temperature has hardly effect on the inhibition efficiency of APTD. The adsorption of APTD on iron surface obeys the Langmuir isotherm. The experimental results show that the inhibition efficiency of 4-APTD is higher than that of 3-APTD, and the molecular dynamics (MD) simulations show that the adsorption of 4-APTD on iron surface has the higher binding energy than that of 3-APTD.     

Corrosion behavior of alumina ceramics in aqueous HCl and H2SO4 solutions

The corrosion behavior of cold isostatically pressed (CIP) high purity alumina ceramics in aqueous HCl and H₂SO₄ solutions with various concentrations has been studied simultaneously at room temperature (25 °C). Corrosion tests were also performed with 0.65 mol/l HCl and 0.37 mol/l H₂SO₄ solutions at 40, 55 and 70 °C for 48 h. Chemical stability was monitored by determining the amount of Al³⁺, Mg²⁺, Ca²⁺, Na⁺ Si⁴⁺ and Fe³⁺ ions eluted in different concentrations of HCl and H₂SO₄ solutions by means of atomic absorption spectrometry (AAS). By increasing the concentration from 0.37 to 6.5 mol/l, it was notified that the corrosion susceptibility in HCl and H₂SO₄ solutions for the CIP alumina specimens at room temperature decreases.     

Substitutional adsorption isotherms and corrosion inhibitive properties of some oxadiazol-triazole derivative in acidic solution

A newly synthesized oxadiazol-triazole derivative (TOMP), was investigated as corrosion inhibitor of mild steel in 0.5 M H₂SO₄ solution using weight loss measurements, polarization and electrochemical impedance spectroscopy (EIS) methods. Results obtained revealed that TOMP is effective corrosion inhibitor for mild steel in sulphuric acid and its efficiency attains more than 97.6% at 298 K. The number of water molecules (X) replaced by a molecule of organic adsorbate was determined from the substitutional adsorption isotherms applied to the data obtained from the weight loss experiments performed on mild steel specimen in acidic solution in the 298-333 K range.     

Inhibition effect of nonionic surfactant on the corrosion of cold rolled steel in hydrochloric acid

The inhibition effect of Tween-20 as a nonionic surfactant on the corrosion of cold rolled steel (CRS) in 1.0-8.0 M HCl has been studied at different temperatures (20-50 °C) by weight loss and potentiodynamic polarization methods. Atomic force microscope (AFM) provided the CRS surface conditions. The results show that Tween-20 is a good inhibitor in 1.0 M HCl, and the inhibition efficiency (IE) increases with the inhibitor concentration, while decreases with increasing the hydrochloric acid concentration and temperature. Effect of immersion time was also studied and discussed. The adsorption of inhibitor on the CRS surface obeys the Langmuir adsorption isotherm equation. Both thermodynamic and kinetic parameters have been obtained by adsorption theory and kinetic equations. The inhibition effect is satisfactorily explained by the parameters. Polarization curves show that Tween-20 is a mixed-type inhibitor in hydrochloric acid. The results obtained from weight loss and polarization are in good agreement, and Tween-20 inhibition action could also be evidenced by surface AFM images.