共查询到18条相似文献,搜索用时 250 毫秒
1.
控制棒棒位测量传感器是低温核供热堆控制棒步进和落棒测量的关键设备,其精度和可靠性直接关系到反应堆的安全性。对于双螺旋结构电容式棒位测量传感器,完成了传感器静态特性实验,利用有限元分析方法建立了传感器的计算模型,模型计算结果与实验结果符合良好。在此基础上,采用有限元模型结合正交试验方法分析了极板张角、极板螺距、陶瓷管壁厚度等设计参数对传感器偏心性能的影响,获得了传感器设计参数的优化组合。研究结果表明,减小极板张角、增大极板螺距、增大陶瓷管壁厚度、减小陶瓷管相对介电常数有助于减小传感器偏心误差,由正交试验方法获得的参数组合能实现棒位测量不失步的要求。研究成果为双螺旋结构电容式棒位测量传感器的设计和优化奠定了基础。 相似文献
2.
电容式棒位测量传感器是200 MW低温核供热堆控制棒水压驱动系统的关键测量部件,其精度和可靠性直接关系到反应堆的安全性。本文基于有限元方法建立了电容式棒位测量传感器的理论模型,对两电极电容式棒位测量传感器检测场的灵敏度分布特性进行了分析。结果表明,在检测场内存在一个特定区域,被测杆向该区域偏移时偏心误差较小。基于该特性提出了多电极电容式棒位测量传感器的设计方案和轮转电极的电容检测方法,针对该传感器,利用有限元模型进行了传感器结构优化和被测杆偏心误差分析,完成了传感器静态特性实验并验证了模型计算结果。分析结果表明,多电极电容式棒位测量传感器与轮转电极的电容检测方法能有效利用检测场的灵敏度分布特性,优化后传感器的偏心误差能达到棒位测量不失步的要求。研究成果为电容式棒位测量传感器的设计和优化提供了新的方向。 相似文献
3.
4.
5.
6.
采用法国TRIO-VF反应堆热工水力计算程序对反应堆流场进行数值计算,其几何模型与实验模型完全相同,获得了满意的结果.采用国内外最先进的PIV粒子成像测速仪对反应堆流场进行测量,获得了上腔室周边流场和上封头流场速度分布与压力分布以及吊篮上法兰喷嘴阻力系数.对测量结果进行了详细的分析讨论,并将计算结果与实验结果进行了对比分析.结果表明,上腔室和上封头内流场的速度和压力均相符较好. 相似文献
7.
8.
分别计算了燃料温度,控制棒棒位,铀重量比,燃料奉半径和燃料对瞬发负温度系数的影响,并且对结果进行了理论分析,研究表明:对于铀氢锆堆发负温度系数,起主要作用的是铀的重量比,燃料温度和控制棒棒位,其次是燃料棒半径,而燃耗的影响较小。 相似文献
9.
相对中子通量密度分布是反应堆的重要物理参数之一,测量环形燃料零功率反应堆堆芯相对中子通量密度分布对了解环形燃料堆芯反应堆物理特性及开展安全分析具有指导意义。本文在环形燃料堆芯多边形装载下,采用箔活化法对辐照后燃料元件外表面不同位置金箔的γ活度进行测量,得到不同位置燃料元件轴向、径向的相对中子通量密度分布,并将测量值与蒙特卡罗理论计算值进行比对。结果表明:实验测量值与理论计算值最大相对偏差在12%以内,相对中子通量密度分布测量结果符合实验设计预期,现有蒙特卡罗分析手段可较好地分析堆内元件轴向通量密度分布情况。本文结果可为环形燃料的工程化应用提供重要的数据支撑。 相似文献
10.
本文介绍了秦山核电厂反应堆堆芯冷却剂温度系数测量试验的理论校核计算工作。该校核计算工作具有较好的精确度,最后的计算结果与测量值符合良好,满足工程要求,可以作为反应堆启动、运行的指导和参考。 相似文献
11.
ABSTRACTThis study employed a new method for measuring the ungrounded/grounded control rod position. In this connection, a sensor system based on the two-electrode capacitance is applied to measure the rod position in NHR. The application of the capacitance sensor is extensively developed with measuring insulating objects. However, the capacitance sensors measuring for ungrounded/grounded control rod position are seldom studied earlier. In addition, the proposed model was set up with ungrounded/grounded control rod for the two-electrode sensor. According to the different electric properties of ungrounded and grounded control rod, this apparatus determines the control rod position using an interface electronics method and two-electrode capacitance sensor. The subsequent experiment and calibration analyses on the data indicate the high reliability and accuracy of the apparatus for monitoring rod position. It is demonstrated that such a system can be applied to automatic real-time monitoring of control rod positon in nuclear heating reactor. 相似文献
12.
结合AP1000的数字化棒位指示系统,通过分析AP1000控制棒的组成、控制棒驱动机构和棒位测量探测器布置,并从数字化测量角度指出了非接触式传感器测量、探测线圈的冗余设计和数字化数据传输等可靠性技术的应用,确保了AP1000反应堆棒位测量精度和棒位控制系统的安全可靠。 相似文献
13.
为了给在建中的西安脉冲堆数字化仪表与控制系统提供调试用模拟信号源、验证功率调节方法以及人员培训等,研制了一套西安脉冲反应堆半实物仿真系统。提出了半实物仿真系统的设计思想,设计了系统框架。改进了堆芯仿真物理模型,使用MATLAB编制了堆芯实时仿真程序。采用组态王软件编制了人机界面,采用可编程控制器S7-200进行棒位控制和棒位测量。研制了控制棒驱动机构模拟件、信号发生器和手动操作盘等多个硬件设备,建立了系统内部的通讯。在该半实物仿真系统上模拟了升、降控制棒的功率变化和发射脉冲后的脉冲参数,与堆上实验结果符合较好,测量了信号发生器的输出信号,与预期一致。结果表明,该半实物仿真系统能够实现设计目的且性能良好。 相似文献
14.
15.
16.
17.
18.
XU Jianping MA Xiaodi ZHANG Zhifeng ZHAO Jiecheng NING Tong CHENG Yuting 《原子能科学技术》1959,54(10):1873-1878
The control rod worth measurement of the zero-power experimental device is generally performed by the periodic method, the substitution method or the rod drop method. In order to improve the efficiency of measurement, a multi-step rod-insertion method without compensation was proposed. The control rod worth of the first lead-bismuth reactor zero-power experimental device in China was measured by this method, and the results were compared with those obtained by the compensation method and the rod drop method. The accuracy of the method was verified by theoretical calculations. The results indicate that this method effectively reduces the space effect on measured worth, and the measurement results of control rod worth are accurate and reliable. The method can complete the higher precision rod worth measurement in a short time, and is suitable for the critical experimental device that needs to change the charging scheme frequently. 相似文献