一次搪彩色铸铁瓷釉的研制

本文详尽地分析了一次搪彩色铸铁瓷釉开发研制的可能性和必要性。提出了该类瓷釉在ＴｉＯ２－Ｒ２Ｏ－Ｂ２Ｏ３－ＳｉＯ２系统中的化学组成范围及其相应的各项工艺技术参数，该项研究课题业已申请国家发明专利，专利申请号为：９４１１６２３８．９。     

搪玻璃釉耐碱性的探讨

在普通对酸搪玻璃釉中加入适量的ZrO2和SrO，并使其配比量恰当，可获得良好的耐酸与耐碱性能，且具有良好的工艺性能。     

涂搪工艺系统

概述了目前存在的各种涂搪工艺系统,提出了每种工艺方法的优缺点以及对环境的影响,讨论了实际生产最有效涂搪系统的选择依据。     

平板金属件的涂搪方法及其涂搪后的制品

本发明涉及平板的金属件的涂搪方法及其涂搪后的制品,其步骤包括１）．对平板金属件进行预处理;（２）将金属陶瓷瓷釉层涂于经预处理后的一面;（３）在适当的熔化温度下熔融已施涂的金属陶瓷瓷釉层;（４）再在瓷釉层上施涂一层可透气的耐化学腐蚀的漆层。     

化工搪玻璃设备的热喷涂修补

介绍了热喷涂陶瓷粉修补搪玻璃设备的原理、特点及修补工艺和喷涂层数据。     

喷雾造粒在热喷涂中的应用研究

制备适合热喷涂的粉末是热喷涂技术的一个关键问题,喷雾造粒是一种较成熟的热喷涂粉末制备技术,尤其是大颗粒纳米结构喂料。本文结合热喷涂用粉末的物性要求,探讨喷雾造粒工艺对粉末物性及涂层质量的影响,综述喷雾造粒技术在热喷涂中的应用研究。     

铝锌镀层钢板搪瓷烧成工艺的探讨

将铝锌镀层钢板搪瓷在一定温度下不同时间烧成,通过金相、扫描电镜和能谱仪对样品横切面进行分析,探讨不同的烧成工艺对搪瓷烧成结果的影响。     

Effects of Processing Parameters on the Deposition of Yttria Partially Stabilized Zirconia Coating During Suspension Plasma Spray

The process–microstructure relationship in suspension plasma spray (SPS) of yttria partially stabilized zirconia (YSZ) has been studied experimentally. An ethanol‐based suspension with a powder loading of 25 wt% was plasma sprayed with radial injection under four different plasma conditions, to examine the effects of plasma gas composition (Ar/He ratio), secondary gas (Ar/He and Ar/H₂), and the nozzle diameter of the plasma gun. The suspension feeding rate was optimized firstly and coatings were prepared for microstructural observation. Capturing of in‐flight particles into water as well as collection of splats formed on heated flat metal substrates were utilized in order to better understand the more complicated intermediate process steps in SPS. It was found that a plasma jet with higher momentum allowed a higher suspension flow rate and both columnar and deep vertically cracked structure could be created depending on the plasma parameters as well as the substrate surface roughness.     

卫生瓷阴阳釉的研制

介绍了阴阳釉的制备方法和施釉工艺。其工艺基础为底釉、面釉分别制备,三次施釉,一次烧成其装饰拈民桃花片轴相似。     

用熔加法研制硫硒化镉红色搪瓷色釉

用熔加法研制硫硒化镉红色搪瓷色釉陶瑛，张国武，王承遇，谷秀梅（大连轻工业学院１１６００Ｑ）车英华，孔繁利（大连搪瓷工业总厂１１６０２１）ＡＲｅｓｅａｃｈｏｎＣａｄｍｉｕｍＳｕｌｆｓｅｌｅｎｉｄｅＲｅｄＥｎａｍｅｌＧｌａｚｅＰｒｏｄｕｃｅｄｂｙＰｉｇｍ...     

不同换热管用钢材的搪瓷密着性能研究

通过落球冲击法评价了低碳钢(20钢)和耐候钢(09CrCuSb)搪瓷密着强度,并采用扫描电镜和能谱仪分析了钢材与搪瓷结合层的微观形貌及成分。结果表明:低碳钢和耐候钢的搪瓷密着等级分别为2级和5级;低碳钢与瓷釉界面形成了锯齿状和枝晶状结构,界面粗糙,而耐候钢与瓷釉界面形成了脱离基体的岛状结构,界面较光滑;结合层主要成分均为Fe、Cu、Ni、Co元素;钢材与瓷釉之间形成粗糙的界面有利于提高搪瓷密着性能。     

砌墙陶瓷的新型施釉工艺

制定了一种向陶瓷熔融面喷涂釉粉的施釉工艺 ,研究了各种因素对釉层性能的影响     

Emulsion Precipitation of Yttria-Stabilized Zirconia for Plasma Spray Coatings

Chemically uniform, high-purity, yttria-stabilized zirconia (YSZ) powders were prepared by emulsion hydrolysis of the metal alkoxides, acetates, and mixtures of alkoxides and acetates. Both the morphology and particle size of the powders can be controlled by varying the hydrolysis conditions. Spherical or granular powders with particle sizes ranging from submicrometer to a few hundred micrometers were obtained. X-ray diffraction and EDX results showed that yttria was evenly distributed throughout the zirconia particles. The crystalline phase of the powders after calcination at 800°C was 100% nontransformable tetragonal. The powders were successfully sprayed by a plasma coating technique on stainless steel coupons, and the coatings were evaluated.     

粉末喷涂在线镀膜技术

介绍了粉末喷涂在线镀膜技术国内外发展概况,对镀膜重要工艺过程及影响因素进行了详细分析和总结,并对应用前景进行了展望.     

影响熔加法搪瓷黄色釉中镉溶出量的因素

影响熔加法搪瓷黄色釉中镉溶出量的因素张国武，陶瑛，王承遇，谷秀梅，车英华，孔繁利（大连轻工业学院１１６００１）（大连搪瓷工业总厂１１６０２１）ＴｈｅＦａｃｔｏｒｓＩｎｆｌｕｅｎｃｉｎｇｏｎＣａｄｍｉｕｍＲｅｌｅａｓｅｆｒｏｍＹｅｌｌｏｗＥｎａｍｅｌＧ...