New Pyridine ONN‐Pincer Gold and Palladium Complexes: Synthesis,Characterization and Catalysis in Hydrogenation,Hydrosilylation and C?C Cross‐Coupling Reactions

The ONN‐tridentate unsymmetrical pincer 2‐[6‐(pyrrolidin‐1‐ylmethyl)pyridin‐2‐yl]phenol and N‐tert‐butyl‐1‐{[6‐(2‐hydroxyphenyl)pyridin‐2‐yl]methyl}pyrrolidine‐2‐carboxamide ligands were synthesized by an easy method in high purity and good yields. All the organic compounds were characterized by elemental analysis, mass spectrometry, IR and ¹H and ¹³C NMR spectroscopy. Palladium(II) and gold(III) complexes have been prepared as air‐stable solids, with the ONN‐tridentate ligand after deprotonation of the hydroxy group, the coordination of the metal ion is completely stereospecific and gives rise to only one diastereoisomer. These complexes were shown to be very active catalysts in the hydrogenation (80 % ee was achieved with the chiral gold complex), hydrosilylation and C C coupling, Suzuki and Heck, reactions, under mild conditions.     

BASF NanoSelect? Technology: Innovative Supported Pd- and Pt-based Catalysts for Selective Hydrogenation Reactions

An innovative BASF catalyst manufacturing technology (NanoSelect?) is introduced which allows production of heterogeneous catalysts with excellent control over metal crystallite sizes. NanoSelect? technology enabled the development of Pd catalysts which are lead-free Lindlar catalyst replacements in alkyne-to-cis-alkene hydrogenations. NanoSelect? Pt catalysts showed excellent chemoselectivity in substituted nitro-arene hydrogenation reactions without build-up of hydroxylamine intermediates. All NanoSelect? produced catalysts show markedly higher activity per gram of metal leading to ten-fold less use of precious metal.     

Palladium Complex Immobilized on Magnetic Nanoparticles Modified with 2-Aminopyridine Ligand: A Novel and Efficient Recoverable Nanocatalyst for C–S and C–Se Coupling Reactions

Catalysis Letters - A novel, versatile and efficient magnetically recoverable palladium nanocatalyst [Fe3O4@SiO2/2-aminopyridine-Pd(II)] was fabricated via the immobilization of palladium(II)...     

Universal Brønsted-Evans-Polanyi Relations for C–C,C–O,C–N,N–O,N–N,and O–O Dissociation Reactions

Abstract  

It is shown that for all the essential bond forming and bond breaking reactions on metal surfaces, the reactivity of the metal surface correlates linearly with the reaction energy in a single universal relation. Such correlations provide an easy way of establishing trends in reactivity among the different transition metals.     

Fischer–Tropsch Synthesis: Deuterium Kinetic Isotope Study for Hydrogenation of Carbon Oxides Over Cobalt and Iron Catalysts

Abstract  

The hydrogenation of CO₂ using Pt promoted Co/γ-Al₂O₃ and doubly (Cu, K) promoted iron catalysts exhibits an inverse isotope effect (r ^H/r ^D < 1). The observed inverse isotope effect for hydrogenation of CO₂ shows that hydrogen addition to CO₂ should be involved in the kinetically relevant step. The systematic increase of inverse isotope effect with carbon number of products obtained during H₂–D₂–H₂ switching experiments suggests the possible existence of a common intermediate (CH _x O) for hydrogenation of CO₂ over both cobalt and iron FT catalysts. The magnitude of the inverse isotope effect is lower for CO₂ compared to CO hydrogenation under similar reaction conditions. The deuterium isotope effect does not provide a definite conclusion regarding the mechanism which CO₂ hydrogenation follows (alkyl, enol, or alkylidine mechanisms).     

Development of Efficient and Reusable Diarylphosphinopolystyrene‐Supported Palladium Catalysts for C?C Bond Forming Cross‐Coupling Reactions

Short and versatile syntheses of reusable diarylphosphinopolystyrene‐supported palladium catalysts 3a – j are described. The bis(o‐tolyl)phosphino catalyst 3b is particularly efficient for the Suzuki and Sonogashira cross‐couplings, whereas the bis(m‐tolyl)phosphino catalyst 3c is the most active catalyst for Heck reactions. The couplings are performed under non‐anhydrous reaction conditions and require only low amounts of supported palladium (0.5 mequivs. for Suzuki–Miyaura, 1.0 mequiv. for Sonogashira and 0.5 mequivs. for Heck reactions could be sufficient). Catalysts 3a–j are recovered by filtration and can be reused more than four times with no loss of efficiency.     

Modified Sol–Gel Based Nanostructured Zirconia Thin Film: Preparation,Characterization, Photocatalyst and Corrosion Behavior

In this work, AISI 316L stainless steel was coated by nanostructured zirconia using the sucrose assisted sol–gel dip-coating route. Then, the effect of different calcination temperatures and the thickness of the coating on the corrosion protection of 316L stainless steel was investigated. Here, Zr(acac)₄ and sucrose were used as starting materials and gelation agents, respectively. Thermogravimetry and differential thermal analysis, X-ray powder diffraction (XRD), Fourier transform infrared, scanning electron microscopy and energy dispersive X-ray spectroscopy were used to characterize the coatings. XRD revealed that the pure tetragonal phase of zirconia was obtained at the calcination temperature of 300–500 °C. However, the mixture of monoclinic (m) and tetragonal (t) phase found in the zirconia coating calcined at 650 °C. Also, by increasing the calcination temperature from 300 to 650 °C, the mean of the crystallite size of structures was increased from 7 to 27 nm. AFM result show that the average roughness value of the sample calcined at 300 °C is 10.5 nm and the dimensions of the particles on the surface of this sample smaller than 50 nm. The potentiodynamic polarization and electrochemical impedance spectroscopy results revealed that the as-synthesized nanostructured sol–gel zirconia coatings exhibited a barrier property for the protection of the substrate. However, the highest corrosion resistance was obtained by the zirconia coating calcined at 300 °C. This was as a result of the desirable compromise of good adhesion, low defect density, and high barrier behaviour. Furthermore, zirconia nanoparticles were synthesized by calcination of the gel at the different temperature. The photocatalytic activity of samples was tested for degradation of methyl orange solutions. It is found that ZrO₂ nanoparticles calcined at 500 °C have higher photocatalytic activity than the other samples under UV light.     

Pd(II)/Pd(0) Anchored on Magnetic Organic–Inorganic Hybrid Mesoporous Silica Nanoparticles: A Nanocatalyst for Suzuki–Miyaura and Heck–Mizoroki Coupling Reactions

Journal of Inorganic and Organometallic Polymers and Materials - 3-Chloropropyltrimethoxysilane (CPTMS) was grafted on the surface of silica coated Fe3O4 core (Fe3O4@MCM-41) and then condensed with...     

Raw materials,microstructure, and properties of MgO–C refractories: Directions for refractory recipe development

A range of steel making vessels and continuous casting components use graphite containing MgO-C refractories that work from ambient to 1600 °C or higher. In the current study, a detailed review on the key importance behind the rightful selection of raw material quality in the development of MgO-C refractories with improved high-temperature microstructure stability is provided. Special cases of carbon\ceramic reinforcements (SiC, nanocarbon, EG, CNT’s, Zircon, Titania) are also included in this review study with the combination of regular raw materials used in refractory formulation such as magnesia, graphite, resin binder, antioxidant additives, and alloys thereof. Additionally, the material design concept based on strength factor (f_s) has been applied to implicate the raw material quality analysis in the development of carbon containing refractory recipe exhibiting satisfactory hot-strength performance with the recyclable MgO-C grog over the commercially available carbon\ceramic reinforcements is discussed.     

Four New Metal–Organic Supramolecular Networks Based on Aromatic Acid and Flexible Bis(imidazole) Ligand: Synthesis,Structures and Luminescent Properties

Four new metal–organic supramolecular networks, namely, [Zn(H₂pdc)₂(H₂O)₂]·2H₂O·bbi (1), {[Cd(Hpdc)₂]·2H₂O₂·H₂bbi}_n (2), [Zn(BA)₂(bbi)]_n (3), and {[Cd(BA)₂(bbi)]·H₂O}_n (4) (H₃pdc = 3,5-pyrazoledicarboxylic acid, HBA = 3-hydroxybenzoic acid and bbi = 1,1′-(1,4-butanediyl)bis(imidazole)) have been synthesized under hydrothermal conditions and characterized by IR spectra, elemental analyses, and single-crystal X-ray diffraction analyses. Compound 1 possesses zero-dimensional (0D) structure, which is finally extended into a two-dimensional (2D) supramolecular network via O–H···O and C–H···O hydrogen bonds. Complex 2 displays a 2D network structure built from Cd²⁺ atoms interconnected by Hpdc^2? ligands. The adjacent networks are further assembled into three-dimensional (3D) supramolecular structure through O–H···O hydrogen bonds. Compounds 3 and 4 show similar one-dimensional (1D) chains, in which four-coordinated Zn(II) atoms and six-coordinated Cd(II) atoms are bridged by bbi ligands. Through O–H···O and C-H···O hydrogen bonding interactions, the 1D chains are further packed into 2D and 3D supramolecular frameworks for 3 and 4, respectively. Obviously, the structural differences among compelxes 1–4 are attributed to the different central metal atoms and organic ligands. In addition, compounds 1–4 exhibit blue fluorescent emission in the solid state at room temperature.