Influence of composition and temperature on the band gap of glassy melts As<Subscript>2</Subscript>S<Subscript>3</Subscript>-Sb<Subscript>2</Subscript>S<Subscript>3</Subscript>

The edge absorption of glassy melts of the As-Sb-S system are investigated in the temperature interval 77–300 K. It is shown that the temperature dependence of the fundamental absorption edge is described by an exponential function of the photon energy. The temperature and concentration dependences of the optical band gap of glasses of the (As₂S₃)_{100 − x} · (Sb₂S₃) _x section are found. The known Varshni relation is used to describe the temperature dependence.     

The system SiC–W<Subscript>2</Subscript>B<Subscript>5</Subscript>–LaB<Subscript>6</Subscript>

Experiments and calculations have been applied to the structure of the triple eutectic system SiC–W₂B₅–LaB₆(T _eu = 1900 ± 40°C), composition in mol.%: 10 LaB₆, 44 SiC, 46 W₂B₅, error ±2–3%, which opens up prospects for making ceramic materials for various purposes.     

Study on the properties of Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>-B<Subscript>2</Subscript>O<Subscript>3</Subscript>-BaO lead-free glass using in the electronic pastes

The Sb₂O₃ doping lead-free glass in Bi₂O₃-B₂O₃-BaO ternary system were prepared in the composition of several different subsystem, and the glass powder was produced through the process of water quenching. Glass transition temperatures (T _g ), glass soften temperatures(T _s ), the volume resistivity (ρ) in the temperature range of 80–200°C, and linear thermal coefficients of expansion in the temperatures range of 25–300°C (α_25–300) were measured for subsystems along with the different ratio of Bi₂O₃, B₂O₃ and BaO. For these subsystems, T _g ranged from 458 to 481°C, and T _s ranged from 490 to 512°C, both decreasing with the increasing of Bi₂O₃/B₂O₃ ratio, and increasing with the increasing of BaO/B₂O₃ ratio. The measured α_25–300 ranged from 65.3 to 76.3 × 10⁻⁷ K⁻¹, with values increasing with increasing Bi₂O₃/B₂O₃ and BaO/B₂O₃ ratio. The volume resistivity remains at a high standards, which may caused by it’s non-alkali composition, and it fluctuated from 10¹³ to 10¹¹ Ω cm with the temperature varied from 80–200°C. The structure of Bi₂O₃-B₂O₃-BaO ternary leadfree glass system was mearsured by FT-IR. The IR studies indicate that these glasses are made up of [BiO₆], [BO₃], and [BO₄] basic structural units, and it appears that Ba²⁺ acts as a glass-modifier in this ternary system, but the Bi³⁺ has entered the glass network when it is in relative high content so as to change the α_25–300, T _s and T _g .     

Mechanism of formation of the complex oxide Na<Subscript>2</Subscript>Nd<Subscript>2</Subscript>Ti<Subscript>3</Subscript>O<Subscript>10</Subscript>

The processes of phase formation in the Nd₂O₃-TiO₂-Na₂CO₃ system have been investigated in the temperature range 500–1100°C. The mechanism of the high-temperature solid-phase reaction of formation of the complex oxide Na₂Nd₂Ti₃O₁₀ has been studied. It has been established that the Na₂Nd₂Ti₃O₁₀ compound is formed from the intermediate product Na_0.5Nd_0.5TiO₃ with a perovskite structure in the temperature range 830–890°C and from the NaNdTiO₄ oxide with a perovskite-like layered structure in the temperature range 960–1100°C.     

Synthetic spinels of the system MgO-Cr<Subscript>2</Subscript>O<Subscript>3</Subscript>-Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>

Synthetic spinels of the system MgO-Cr₂O₃-Al₂O₃-Fe₂O₃ are considered and the desirability of organizing their production for the refractory industry is demonstrated. Translated from Novye Ogneupory, No. 6, pp. 32–35, June 2008.     

Analysis of disproportionation of <Emphasis Type="Italic">Q</Emphasis><Superscript><Emphasis Type="Italic">n</Emphasis></Superscript> structons in the simulation of the structure of melts in the Na<Subscript>2</Subscript>O-SiO<Subscript>2</Subscript> system

A new version of the STRUCTON-1.2 computer program (2009) has been presented. The program combines the algorithm for calculating real distributions of Q ⁿ structons in binary silicate melts (with allowance made for their disproportionation) and the statistical simulation of molecular-mass distributions of polymerized ions at different temperatures. This model has been used to perform test calculations for two melts in the Na₂O-SiO₂ system (Na₆Si₂O₇, Na₆Si₃O₉). The results of the calculations have made it possible to trace variations in the set and concentrations of chain and ring silicon-oxygen complexes with a decrease in the temperature in the order: stochastic molecular-mass → distribution molecular-mass distribution at T = 2000 K → molecular-mass distribution at the liquidus temperature. The main result of these calculations is that the dominant species of silicon-oxygen anions at the liquidus temperatures (in contrast to the stochastic distributions) exactly correspond to the stoichiometry of the initial melts: the Si₂O₇⁶⁻ chain anions and (Si _n O_3n )³ⁿ⁻ ring complexes are dominant in the Na₆Si₂O₇ and Na₆Si₃O₉ melts, respectively. It has been established that, with a decrease in the temperature, the average size of polymer complexes varies weakly in the Na₆Si₂O₇ melt but increases by a factor of approximately 1.5 in the metasilicate system.     

Hydrothermal synthesis of nanotubes based on (Mg,Fe,Co,Ni)<Subscript>3</Subscript>Si<Subscript>2</Subscript>O<Subscript>5</Subscript>(OH)<Subscript>4</Subscript> hydrosilicates

Hydrosilicate nanotubes of the variable composition (Mg,Fe,Co,Ni)₃Si₂O₅(OH)₄ with a chrysotile structure have been synthesized under hydrothermal conditions at temperatures of 250–450°C and pressures of 30–100 MPa in media of different compositions. The conditions and ranges of formation of nanotubular hydrosilicates of the compositions under investigation have been determined. It has been demonstrated that the type of cation of the octahedral layer in the chrysotile structure has a decisive effect on the physicochemical conditions, mechanism, and rate of formation of nanotubes, as well as on their structure, morphology, and sizes.     

Method of estimating absolute concentrations of C<Subscript>2</Subscript>H<Subscript>5</Subscript> and H radicals in hydrocarbon diffusion flames

A method for estimating absolute concentrations of C₂H₅ and H radicals in hydrocarbon diffusion flames is proposed and substantiated. Concentration profiles of C₂H₅ and H on the flame axis are obtained. In the method proposed, the concentration of C₂H₅ is determined from the equality of two quantities — the rate of loss of n-butane by diffusion and the rate of its formation by recombination of two C₂H₅ radicals. The concentration of H radicals is determined from the relation between the ratio C₂H₅/H and experimental profiles of C₂H₄, C₂H₆, and O₂. __________ Translated from Fizika Goreniya i Vzryva, Vol. 43, No. 6, pp. 13–20, November–December, 2007.     

Structure formation during gas-detonation spraying of coatings from composite powders TiAl<Subscript>3</Subscript> and Ni<Subscript>3</Subscript>Al

This paper considers the mechanisms of structure formation during gas detonation spraying of coatings of TiAl₃ and Ni₃Al intermetallic compounds produced under equilibrium and nonequilibrium synthesis conditions. The coating sprayed from TiAl₃ has the same phase composition as the initial powder, regardless of the synthesis conditions. During spraying of Ni₃Al, the structure of the coating also does not depend on the synthesis conditions and consists of two phases — Ni₃Al and NiAl, with the crystal structure varying along the coating thickness. Comparative impact abrasion tests of the coatings showed advantages of TiAl₃ coatings over coatings based on Ni₃Al and titanium diboride. __________ Translated from Fizika Goreniya i Vzryva, Vol. 44, No. 5, pp. 106–111, September–October, 2008.     

Preparation and electrochemical performance of Li-rich layered cathode material,Li[Ni<Subscript>0.2</Subscript>Li<Subscript>0.2</Subscript>Mn<Subscript>0.6</Subscript>]O<Subscript>2</Subscript>, for lithium-ion batteries

The Li-rich layered cathode material, Li[Ni_0.2Li_0.2Mn_0.6]O₂, was synthesized via a “mixed oxalate” method, and its structural and electrochemical properties were compared with the same material synthesized by the sol–gel method. X-ray diffraction (XRD) shows that the synthesized powders have a layered O₃–LiCoO₂-type structure with the R-3m symmetry. X-ray photoelectron spectroscopy (XPS) indicates that in the above material, Ni and Mn exist in the oxidation states of +2 and +4, respectively. The layered material exhibits an excellent electrochemical performance. Its discharge capacity increases gradually from the initial value of 228 mA hg⁻¹ to a stable capacity of over 260 mA hg⁻¹ after the 10th cycle. It delivers a larger capacity of 258 mA hg⁻¹ at the 30th cycle. The dQ/dV curves suggest that the increasing capacity results from the redox-reaction of Mn⁴⁺/Mn³⁺.     

Synthesis and properties of flux-cast refractories in the Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-MgO-B<Subscript>2</Subscript>O<Subscript>3</Subscript> system

Details are given of the synthesis and testing of flux-cast refractory materials in the alumina-rich region of the Al₂O₃-MgO-B₂O₃ system; XRD and petrography indicate that the main structure-forming phases are corundum and magnesian spinel. In subordinate amounts there are the boroaluminate 9Al₂O₃·2B₂O₃ and the previously unknown compound 4Al₂O₃·MgO·2B₂O₃, whose composition has been established by microprobe analysis. Corrosion tests showed that three-component systems containing magnesium and boron oxides at levels of 5–10% do not increase the corrosion resistance of refractories in molten sodium-calcium-silicate glass and electrovacuum borosilicate glass. __________ Translated from Novye Ogneupory, No. 3, pp. 161–163, March, 2008.     

Synthesis of low-melting eutectic of the CaO–B<Subscript>2</Subscript>O<Subscript>3</Subscript>–SiO<Subscript>2</Subscript> system in a solid phase

Results are provided for a physicochemical study of processes that occur during synthesis of eutectic composition of the CaO–B₂O₃–SiO₂ system in a solid phase, and the possibility of their activation by using starting calcium-containing components with different chemical and thermal prehistory. It is established that independent of the form of starting components, in all cases there is formation of a crystalline eutectic phase, and the sequence of physicochemical processes that occur is determined by the reaction capacity of the calcium compound introduced.     

Synthesis of monohydric alcohols from CO and H<Subscript>2</Subscript> on Fe/Sibunit catalysts

It was demonstrated that R ₂–R ₄ saturated monohydric alcohols can be synthesized from CO and H₂ in the presence of Fe catalysts containing a carbon support of the Sibunit type with granule sizes of 3–5, 1–2, and 0.05–0.1 mm in a fixed-bed reactor at 3 MPa and 240–300°C. It was found that the activity of Fe/Sibunit catalysts and their selectivity for the formation of liquid synthetic products increased with the size of granules and the amount of iron. The catalysts make it possible to obtain fatty alcohols, in which the fraction of R ₂–R ₄ alcohols is as high as 75%, in yields to 56 g/m³.     

Initiation of combustion of a CH<Subscript>4</Subscript>-O<Subscript>2</Subscript> mixture in a supersonic flow with excitation of O<Subscript>2</Subscript> molecules by an electric discharge

The possibility of intensification of ignition of a methane-oxygen mixture in a supersonic flow behind the front of an oblique shock wave by means of excitation of O₂ molecules to the states a ¹Δ_g and b ¹Σ_g⁺ in an electric discharge is discussed. Through numerical simulations, activation of O₂ molecules by an electric discharge is demonstrated to speed up chain reactions in the CH₄-O₂ mixture and to reduce the induction-zone length. Even a small amount of energy input to O₂ molecules in the discharge (≈3·0⁻² J/cm³) can reduce the ignition-delay length by a factor of hundreds and initiate combustion at distances of ≈1 m from the discharge zone at comparatively low temperatures of the gas behind the front (≈1000 K) and moderate pressures (≈10⁵ Pa). Excitation of O₂ molecules by an electric discharge is much more efficient than simple heating of the mixture. __________ Translated from Fizika Goreniya i Vzryva, Vol. 44, No. 3, pp. 3–16, May–June, 2008.     

Oxygen permeability and structural stability of La<Subscript>0.6</Subscript>Sr<Subscript>0.4</Subscript>Co<Subscript>0.2</Subscript>Fe<Subscript>0.8</Subscript>O<Subscript>3−<Emphasis Type="Italic">δ</Emphasis></Subscript> membrane

La_0.6Sr_0.4Co_0.2Fe_0.8O_3−δ oxides were synthesized by citrate method and hydrothermal method. The oxides prepared by citrate method are perovskite type structure, while the oxides by hydrothermal method have a small amount of secondary phase in the powder. Pyrex glass seal and Ag melting seal provided reliable gas-tight sealing of disk type dense membrane in the range of operation temperature, but commercial ceramic binder could not be removed from the support tube without damage to the tube or membrane. Though the degree of gas tightness increases in the order of glass>Ag>ceramic binder, in the case of glass seal, the undesired spreading of glass leads to an interfacial reaction between it and the membrane and reduction of effective permeation area. The oxygen flux of La_0.6Sr_0.4Co_0.2Fe_0.8O_3−δ membrane increases with increasing temperature and decreasing thickness, and the oxygen permeation flux through 1.0 mm membrane exposed to flowing air (P _h =0.21 atm) and helium (P₁=0.037 atm) is ca. 0.33 ml/cm²·min at 950 °C. X-ray diffraction analysis for the membrane after permeation test over 160 h revealed that La₂O₃ and unknown compound were formed on the surface of membrane. The segregation compounds of surface elements formed on both surfaces of membrane irrespective of spreading of glass sealing material. This paper was presented at the 6 ^th Korea-China Workshop on Clean Energy Technology held at Busan, Korea, July 4–7, 2006.     

Simultaneous biofiltration of H<Subscript>2</Subscript>S,NH<Subscript>3</Subscript> and toluene using cork as a packing material

Simultaneous removal of ternary gases of NH₃, H₂S and toluene in a contaminated air stream was investigated over 185 days in a biofilter packed with cork as microbial support. Multi-microorganisms including Nitrosomonas and Nitrobactor for nitrogen removal, Thiobacillus thioparus (ATCC 23645) for H2S removal and Pseudomonas aeruginosa (ATCC 15692), Pseudomonas putida (ATCC 17484) and Pseudomonas putida (ATCC 23973) for toluene removal were used simultaneously. The empty bed residence time (EBRT) was 40–120 seconds and the inlet feed concentration was 50-180 ppmv for NH₃, 30–160 ppmv for H₂S and 40–130 ppmv for toluene, respectively. The observed removal efficiency was 45–100% for NH₃, 96–100% for H₂S, and 10–99% for toluene, respectively. Maximum elimination capacity was 5.5 g/m³/hr for NH₃, >20.4 g/m³/hr for H₂S and 4.5 g/m³/hr for toluene, respectively. During long-term operation, the removal efficiency of toluene gradually decreased, mainly due to depositions of elemental sulfur and ammonium sulfate on the cork surface. The results of microbial analysis showed that nearly the same population density was observed on the surfaces of cork chips collected at each sampling point. Kinetic model analyses showed that there were no particular evidences of interactions or inhibitions among the microorganisms.     

Preparation of Si<Subscript>3</Subscript>N<Subscript>4</Subscript>–ZrO<Subscript>2</Subscript> ceramic composites by self-propagating high-temperature synthesis

Results are provided for a study of Si₃N₄–ZrO₂ composite ceramic material preparation by self-propagating high-temperature synthesis from ferrosilicon and zirconium concentrate. It is noted that as a result of high-temperature dissociation of ZrSiO₄ silicon dioxide is nitrided with formation of silicon oxynitride and it is condensed in surface layers of a specimen in the form of filamentary crystals.     

Thermomechanical properties of refractory materials of AL<Subscript>2</Subscript>O<Subscript>3</Subscript>–Si<Subscript>3</Subscript>N<Subscript>4</Subscript>–C compositions based on acpb after impregnation with a sol-gel composition

Comparative characteristics are presented for the physicomechanical properties and oxidation resistance of refractory materials of Al₂O₃–Si₃N₄–C composition based on an ACPB for the original materials (fired at 1400°C) and after impregnation with a sol-gel composition and heat treatment at 800°C. Areduction in material porosity, increase in strength and reduction in carbon burn-off are due to development of a glassy phase in the pore space and on graphite flakes due to SiO₂formation with thermal destruction of the organosilicon substance.     

Oxidative reforming of methane on structured Ni-Al<Subscript>2</Subscript>O<Subscript>3</Subscript>/cordierite catalysts

The catalytic properties of Ni/Al₂O₃ composites supported on ceramic cordierite honeycomb monoliths in oxidative methane reforming are reported. The prereduced catalyst has been tested in a flow reactor using reaction mixtures of the following compositions: in methane oxidation, 2–6% CH₄, 2–9% O₂, Ar; in carbon dioxide and oxidative carbon dioxide reforming of methane, 2–6% CH₄, 6–12% CO₂, and 0–4% O₂, and Ar. Physicochemical studies include the monitoring of the formation and oxidation of carbon, the strength of the Ni-O bond, and the phase composition of the catalyst. The structured Ni-Al₂O₃ catalysts are much more productive in the carbon dioxide reforming of methane than conventional granular catalysts. The catalysts performance is made more stable by regulating the acid-base properties of their surface via the introduction of alkali metal (Na, K) oxides to retard the coking of the surface. Rare-earth metal oxides with a low redox potential (La₂O₃, CeO₂) enhance the activity and stability of Ni-Al₂O₃/cordierite catalysts in the deep and partial oxidation and carbon dioxide reforming of methane. The carbon dioxide reforming of methane on the (NiO + La₂O₃ + Al₂O₃)/cordierite catalyst can be intensified by adding oxygen to the gas feed. This reduces the temperature necessary to reach a high methane conversion and does not exert any significant effect on the selectivity with respect to H₂.     

Glass formation region and order of formation of crystalline phases in the SrO-B<Subscript>2</Subscript>O<Subscript>3</Subscript>-SiO<Subscript>2</Subscript> system

The glass formation region in the SrO-B₂O₃-SiO₂ system has been refined. The order of formation of crystalline phases in the system has been investigated at SrO contents of 50–75 mol %. It has been demonstrated that, at low temperatures, the 2SrO · SiO₂ and 3SrO · B₂O₃ phases crystallize first irrespective of the composition. The congruent melting temperature of the 3SrO · B₂O₃ · SiO₂ compound is determined to be 1180 ± 10°C. The triangulation previously performed for the SrO-B₂O₃-SiO₂ system in the concentration range 50–75 mol % SrO has been confirmed.