Housing tubes from the marine worm Chaetopterus sp.: biomaterials with exceptionally broad thermomechanical properties

The housing tube material of the marine worm Chaetopterus sp. exhibits thermal stability up to 250°C, similar to other biological materials such as mulberry silkworm cocoons. Interestingly, however, dynamic mechanical thermal analysis conducted in both air and water elucidated the lack of a glass transition in the organic tube wall material. In fact, the viscoelastic properties of the anhydrous and undried tube were remarkably stable (i.e. constant and reversible) between –75°C and 200°C in air, and 5°C and 75°C in water, respectively. Moreover, it was found that hydration and associated-water plasticization were key to the rubber-like flexible properties of the tube; dehydration transformed the material behaviour to glass-like. The tube is made of bionanocomposite fibrils in highly oriented arrangement, which we argue favours the biomaterial to be highly crystalline or cross-linked, with extensive hydrogen and/or covalent bonds. Mechanical property characterization in the longitudinal and transverse directions ascertained that the tubes were not quasi-isotropic structures. In general, the higher stiffness and strength in the transverse direction implied that there were more nanofibrils orientated at ±45° and ±65° than at 0° to the tube axis. The order of the mechanical properties of the soft–tough tubes was similar to synthetic rubber-like elastomers and even some viscid silks. The complex structure–property relations observed indicated that the worm has evolved to produce a tubular housing structure which can (i) function stably over a broad range of temperatures, (ii) endure mechanical stresses from specific planes/axes, and (iii) facilitate rapid growth or repair.     

Surface wettability of plasma SiOx:H nanocoating-induced endothelial cells' migration and the associated FAK-Rho GTPases signalling pathways

Vascular endothelial cell (EC) adhesion and migration are essential processes in re-endothelialization of implanted biomaterials. There is no clear relationship and mechanism between EC adhesion and migration behaviour on surfaces with varying wettabilities. As model substrates, plasma SiO_x:H nanocoatings with well-controlled surface wettability (with water contact angles in the range of 98.5 ± 2.3° to 26.3 ± 4.0°) were used in this study to investigate the effects of surface wettability on cell adhesion/migration and associated protein expressions in FAK-Rho GTPases signalling pathways. It was found that EC adhesion/migration showed opposite behaviour on the hydrophilic and hydrophobic surfaces (i.e. hydrophobic surfaces promoted EC migration but were anti-adhesions). The number of adherent ECs showed a maximum on hydrophilic surfaces, while cells adhered to hydrophobic surfaces exhibited a tendency for cell migration. The focal adhesion kinase (FAK) inhibitor targeting the Y-397 site of FAK could significantly inhibit cell adhesion/migration, suggesting that EC adhesion and migration on surfaces with different wettabilities involve (p)FAK and its downstream signalling pathways. Western blot results suggested that the FAK-Rho GTPases signalling pathways were correlative to EC migration on hydrophobic plasma SiO_x:H surfaces, but uncertain to hydrophilic surfaces. This work demonstrated that surface wettability could induce cellular behaviours that were associated with different cellular signalling events.     

Vortex wake,downwash distribution,aerodynamic performance and wingbeat kinematics in slow-flying pied flycatchers

Many small passerines regularly fly slowly when catching prey, flying in cluttered environments or landing on a perch or nest. While flying slowly, passerines generate most of the flight forces during the downstroke, and have a ‘feathered upstroke’ during which they make their wing inactive by retracting it close to the body and by spreading the primary wing feathers. How this flight mode relates aerodynamically to the cruising flight and so-called ‘normal hovering’ as used in hummingbirds is not yet known. Here, we present time-resolved fluid dynamics data in combination with wingbeat kinematics data for three pied flycatchers flying across a range of speeds from near hovering to their calculated minimum power speed. Flycatchers are adapted to low speed flight, which they habitually use when catching insects on the wing. From the wake dynamics data, we constructed average wingbeat wakes and determined the time-resolved flight forces, the time-resolved downwash distributions and the resulting lift-to-drag ratios, span efficiencies and flap efficiencies. During the downstroke, slow-flying flycatchers generate a single-vortex loop wake, which is much more similar to that generated by birds at cruising flight speeds than it is to the double loop vortex wake in hovering hummingbirds. This wake structure results in a relatively high downwash behind the body, which can be explained by the relatively active tail in flycatchers. As a result of this, slow-flying flycatchers have a span efficiency which is similar to that of the birds in cruising flight and which can be assumed to be higher than in hovering hummingbirds. During the upstroke, the wings of slowly flying flycatchers generated no significant forces, but the body–tail configuration added 23 per cent to weight support. This is strikingly similar to the 25 per cent weight support generated by the wing upstroke in hovering hummingbirds. Thus, for slow-flying passerines, the upstroke cannot be regarded as inactive, and the tail may be of importance for flight efficiency and possibly manoeuvrability.     

Controlling roll perturbations in fruit flies

Owing to aerodynamic instabilities, stable flapping flight requires ever-present fast corrective actions. Here, we investigate how flies control perturbations along their body roll angle, which is unstable and their most sensitive degree of freedom. We glue a magnet to each fly and apply a short magnetic pulse that rolls it in mid-air. Fast video shows flies correct perturbations up to 100° within 30 ± 7 ms by applying a stroke-amplitude asymmetry that is well described by a linear proportional–integral controller. For more aggressive perturbations, we show evidence for nonlinear and hierarchical control mechanisms. Flies respond to roll perturbations within 5 ms, making this correction reflex one of the fastest in the animal kingdom.     

Coastal foredune evolution: the relative influence of vegetation and sand supply in the US Pacific Northwest

Biophysical feedbacks between vegetation and sediment are important for forming and modifying landscape features and their ecosystem services. These feedbacks are especially important where landscape features differ in their provision of ecosystem services. For example, the shape of coastal foredunes, a product of both physical and biological forces, determines their ability to protect communities from rising seas and changing patterns of storminess. Here we assessed how sand supply and changes in vegetation over interannual (3 year) and decadal (21 year) scales influenced foredune shape along 100 km of coastline in the US Pacific Northwest. Across 21 years, vegetation switched from one congeneric non-native beachgrass to another (Ammophila arenaria to A. breviligulata) while sand supply rates were positive. At interannual timescales, sand supply rates explained the majority of change in foredune height (64–69%) and width (56–80%). However, at decadal scales, change in vegetation explained the majority of the change in foredune width (62–68%), whereas sand supply rates explained most of the change in foredune height (88–90%). In areas with lower shoreline change rates (±2 m yr⁻¹), the change in vegetation explained the majority of decadal changes in foredune width (56–57%) and height (59–76%). Foredune shape directly impacts coastal protection, thus our findings are pertinent to coastal management given pressures of development and climate change.     

Vision-based flight control in the hawkmoth Hyles lineata

Vision is a key sensory modality for flying insects, playing an important role in guidance, navigation and control. Here, we use a virtual-reality flight simulator to measure the optomotor responses of the hawkmoth Hyles lineata, and use a published linear-time invariant model of the flight dynamics to interpret the function of the measured responses in flight stabilization and control. We recorded the forces and moments produced during oscillation of the visual field in roll, pitch and yaw, varying the temporal frequency, amplitude or spatial frequency of the stimulus. The moths’ responses were strongly dependent upon contrast frequency, as expected if the optomotor system uses correlation-type motion detectors to sense self-motion. The flight dynamics model predicts that roll angle feedback is needed to stabilize the lateral dynamics, and that a combination of pitch angle and pitch rate feedback is most effective in stabilizing the longitudinal dynamics. The moths’ responses to roll and pitch stimuli coincided qualitatively with these functional predictions. The moths produced coupled roll and yaw moments in response to yaw stimuli, which could help to reduce the energetic cost of correcting heading. Our results emphasize the close relationship between physics and physiology in the stabilization of insect flight.     

Synchrotron imaging reveals bone healing and remodelling strategies in extinct and extant vertebrates

Current understanding of bone healing and remodelling strategies in vertebrates has traditionally relied on morphological observations through the histological analysis of thin sections. However, chemical analysis may also be used in such interpretations, as different elements are known to be absorbed and used by bone for different physiological purposes such as growth and healing. These chemical signatures are beyond the detection limit of most laboratory-based analytical techniques (e.g. scanning electron microscopy). However, synchrotron rapid scanning–X-ray fluorescence (SRS–XRF) is an elemental mapping technique that uniquely combines high sensitivity (ppm), excellent sample resolution (20–100 µm) and the ability to scan large specimens (decimetre scale) approximately 3000 times faster than other mapping techniques. Here, we use SRS–XRF combined with microfocus elemental mapping (2–20 µm) to determine the distribution and concentration of trace elements within pathological and normal bone of both extant and extinct archosaurs (Cathartes aura and Allosaurus fragilis). Results reveal discrete chemical inventories within different bone tissue types and preservation modes. Chemical inventories also revealed detail of histological features not observable in thin section, including fine structures within the interface between pathological and normal bone as well as woven texture within pathological tissue.     

Leaf surface structures enable the endemic Namib desert grass Stipagrostis sabulicola to irrigate itself with fog water

The Namib grass Stipagrostis sabulicola relies, to a large degree, upon fog for its water supply and is able to guide collected water towards the plant base. This directed irrigation of the plant base allows an efficient and rapid uptake of the fog water by the shallow roots. In this contribution, the mechanisms for this directed water flow are analysed. Stipagrostis sabulicola has a highly irregular surface. Advancing contact angle is 98° ± 5° and the receding angle is 56° ± 9°, with a mean of both values of approximately 77°. The surface is thus not hydrophobic, shows a substantial contact angle hysteresis and therefore, allows the development of pinned drops of a substantial size. The key factor for the water conduction is the presence of grooves within the leaf surface that run parallel to the long axis of the plant. These grooves provide a guided downslide of drops that have exceeded the maximum size for attachment. It also leads to a minimum of inefficient drop scattering around the plant. The combination of these surface traits together with the tall and upright stature of S. sabulicola contributes to a highly efficient natural fog-collecting system that enables this species to thrive in a hyperarid environment.     

The nosocomial transmission rate of animal-associated ST398 meticillin-resistant Staphylococcus aureus

The global epidemiology of meticillin-resistant Staphylococcus aureus (MRSA) is characterized by different clonal lineages with different epidemiological behaviour. There are pandemic hospital clones (hospital-associated (HA-)MRSA), clones mainly causing community-acquired infections (community-associated (CA-)MRSA, mainly USA300) and an animal-associated clone (ST398) emerging in European and American livestock with subsequent spread to humans. Nosocomial transmission capacities (R_A) of these different MRSA types have never been quantified. Using two large datasets from MRSA outbreaks in Dutch hospitals (dataset 1, the UMC Utrecht for 144 months; dataset 2, 51 hospitals for six months) and a recently developed mathematical model, we determined the genotype-specific R_A for ST398 and non-ST398 isolates (categorized as HA-MRSA), using observational data, the detection rate of MRSA carriage and the discharge rate from hospital as the input. After detection of 42 MRSA index cases in dataset 1 (all non-ST398 MRSA) 5076 people were screened, yielding 30 secondary cases. In dataset 2, 75 index cases (51 non-ST398 MRSA and 24 ST398) resulted in 7892 screened individuals and 56 and three secondary cases for non-ST398 MRSA and ST398, respectively. The ratio between discharge and the detection rate was 2.7. R_A values (95% confidence interval (CI)) were 0.68 (0.47–0.95) for non-ST398 MRSA in dataset 1, 0.93 (0.71–1.21) for non-ST398 MRSA in dataset 2 and 0.16 (0.04–0.40) for ST398. The R_A ratio between non-ST398 MRSA and ST398 was 5.90 (95% CI 2.24–23.81). ST398 is 5.9 times less transmissible than non-ST398 MRSA in Dutch hospitals, which may allow less stringent transmission-control measures for ST398 MRSA.     

Anatomy of a negative feedback loop: the case of IκBα

The magnitude, duration and oscillation of cellular signalling pathway responses are often limited by negative feedback loops, defined as an ‘activator-induced inhibitor’ regulatory motif. Within the NFκB signalling pathway, a key negative feedback regulator is IκBα. We show here that, contrary to current understanding, NFκB-inducible expression is not sufficient for providing effective negative feedback. We then employ computational simulations of NFκB signalling to identify IκBα molecular properties that are critical for proper negative feedback control and test the resulting predictions in biochemical and single-cell live-imaging studies. We identified nuclear import and nuclear export of IκBα and the IκBα–NFκB complex, as well as the free IκBα half-life, as key determinants of post-induction repression of NFκB and the potential for subsequent reactivation. Our work emphasizes that negative feedback is an emergent systems property determined by multiple molecular and biophysical properties in addition to the required ‘activator-induced inhibitor’ relationship.     

Through the eyes of a bird: modelling visually guided obstacle flight

Various flight navigation strategies for birds have been identified at the large spatial scales of migratory and homing behaviours. However, relatively little is known about close-range obstacle negotiation through cluttered environments. To examine obstacle flight guidance, we tracked pigeons (Columba livia) flying through an artificial forest of vertical poles. Interestingly, pigeons adjusted their flight path only approximately 1.5 m from the forest entry, suggesting a reactive mode of path planning. Combining flight trajectories with obstacle pole positions, we reconstructed the visual experience of the pigeons throughout obstacle flights. Assuming proportional–derivative control with a constant delay, we searched the relevant parameter space of steering gains and visuomotor delays that best explained the observed steering. We found that a pigeon''s steering resembles proportional control driven by the error angle between the flight direction and the desired opening, or gap, between obstacles. Using this pigeon steering controller, we simulated obstacle flights and showed that pigeons do not simply steer to the nearest opening in the direction of flight or destination. Pigeons bias their flight direction towards larger visual gaps when making fast steering decisions. The proposed behavioural modelling method converts the obstacle avoidance behaviour into a (piecewise) target-aiming behaviour, which is better defined and understood. This study demonstrates how such an approach decomposes open-loop free-flight behaviours into components that can be independently evaluated.     

Novel temperature-responsive polymer brushes with carbohydrate residues facilitate selective adhesion and collection of hepatocytes

Temperature-responsive glycopolymer brushes were designed to investigate the effects of grafting architectures of the copolymers on the selective adhesion and collection of hypatocytes. Homo, random and block sequences of N-isopropylacrylamide and 2-lactobionamidoethyl methacrylate were grafted on glass substrates via surface-initiated atom transfer radical polymerization. The galactose/lactose-specific lectin RCA₁₂₀ and HepG2 cells were used to test for specific recognition of the polymer brushes containing galactose residues over the lower critical solution temperatures (LCSTs). RCA₁₂₀ showed a specific binding to the brush surfaces at 37 °C. These brush surfaces also facilitated the adhesion of HepG2 cells at 37 °C under nonserum conditions, whereas no adhesion was observed for NIH-3T3 fibroblasts. When the temperature was decreased to 25 °C, almost all the HepG2 cells detached from the block copolymer brush, whereas the random copolymer brush did not release the cells. The difference in releasing kinetics of cells from the surfaces with different grafting architectures can be explained by the correlated effects of significant changes in LCST, mobility, hydrophilicity and mechanical properties of the grafted polymer chains. These findings are important for designing ‘on–off’ cell capture/release substrates for various biomedical applications such as selective cell separation.     

Spatio-temporal development of the endothelial glycocalyx layer and its mechanical property in vitro

The endothelial glycocalyx is a thin layer of polysaccharide matrix on the luminal surface of endothelial cells (ECs), which contains sulphated proteoglycans and glycoproteins. It is a mechanotransducer and functions as an amplifier of the shear stress on ECs. It controls the vessel permeability and mediates the blood–endothelium interaction. This study investigates the spatial distribution and temporal development of the glycocalyx on cultured ECs, and evaluates mechanical properties of the glycocalyx using atomic force microscopy (AFM) nano-indentation. The glycocalyx on human umbilical vein endothelial cells (HUVECs) is observed under a confocal microscope. Manipulation of the glycocalyx is achieved using heparanase or neuraminidase. The Young''s modulus of the cell membrane is calculated from the force–distance curve during AFM indentation. Results show that the glycocalyx appears predominantly on the edge of cells in the early days in culture, e.g. up to day 5 after seeding. On day 7, the glycocalyx is also seen in the apical area of the cell membrane. The thickness of the glycocalyx is approximately 300 nm–1 μm. AFM indentation reveals the Young''s modulus of the cell membrane decreases from day 3 (2.93 ± 1.16 kPa) to day 14 (0.35 ± 0.15 kPa) and remains unchanged to day 21 (0.33 ± 0.19 kPa). Significant difference in the Young''s modulus is also seen between the apical (1.54 ± 0.58 kPa) and the edge (0.69 ± 0.55 kPa) of cells at day 7. By contrast, neuraminidase-treated cells (i.e. without the glycocalyx) have similar values between day 3 (3.18 ± 0.88 kPa), day 14 (2.12 ± 0.78 kPa) and day 21 (2.15 ± 0.48 kPa). The endothelial glycocalyx in vitro shows temporal development in the early days in culture. It covers predominantly the edge of cells initially and appears on the apical membrane of cells as time progresses. The Young''s modulus of the glycocalyx is deduced from Young''s moduli of cell membranes with and without the glycocalyx layer. Our results show the glycocalyx on cultured HUVECs has a Young''s modulus of approximately 0.39 kPa.     

Measurements of the wall shear stress distribution in the outflow tract of an embryonic chicken heart

In order to study the role of blood–tissue interaction in the developing chicken embryo heart, detailed information about the haemodynamic forces is needed. In this study, we present the first in vivo measurements of the three-dimensional distribution of wall shear stress (WSS) in the outflow tract (OFT) of an embryonic chicken heart. The data are obtained in a two-step process: first, the three-dimensional flow fields are measured during the cardiac cycle using scanning microscopic particle image velocimetry; second, the location of the wall and the WSS are determined by post-processing flow velocity data (finding velocity gradients at locations where the flow approaches zero). The results are a three-dimensional reconstruction of the geometry, with a spatial resolution of 15–20 µm, and provides detailed information about the WSS in the OFT. The most significant error is the location of the wall, which results in an estimate of the uncertainty in the WSS values of 20 per cent.     

The Use of Structural Templates in Protein Backbone Modeling

The procedures used to model a protein structure are well established when the novel protein has high sequence similarity to a protein of known structure. Many proteins of interest have low (i.e. <50%) sequence similarity to any known structure. In these cases new approaches to prediction of structure are required.The use of sequence profiles which relate sequence to known structure has been proposed as one method to assign local regions of structure. As a first stage, templates or “icons” of the many relevant substructural motifs found in proteins must be defined. The sequences which gave rise to these structures are then aligned and a weighted profile obtained.Average structures of the 8 and 12 residue helix-turn and turn-helix motifs have been prepared. These coordinate templates were then used to scan through the Brookhaven protein structural database for similar, superimposable fragments. A composite template of 100 similar fragments for each element was found to be internally consistent to a rmsd=0.92 Å for HT8, 1.54 Å for HT12, 0.41 Å for TH8 and 1.40 Å for TH12. All of the sequences, from these structures, were then used to create an overall sequence profile.The four sequence profiles were scanned against the amino acid sequences of the proteins in the Brookhaven database: tertiary structure was correctly identified only about 10% of the time. This value is too low for predictive purposes. However, it could be increased by checking for multiple occurrences of the template in one protein.     

Electronic transport properties of electrically doped cytosine‐based optical molecular switch with single‐wall carbon nanotube electrodes

This study represents an empirical model of cytosine‐based optical molecular switch. This possible biomolecular switch has been designed using the first principle approach which is based on density functional theory and non‐equilibrium Green''s function. The quantum‐ballistic transport property and current–voltage (I–V) characteristics of cytosine‐based optomolecular switch have been investigated at 25 THz operating frequency. The influence of highest occupied molecular orbital–lowest unoccupied molecular orbital (HOMO–LUMO) gaps on the electronic transmission and I–V characteristics has been discussed in detail. The aim of this study is to highlight the minimum conformational change during a single ON–OFF switching cycle. The biomolecule comprises switching behaviour when converts from straightened to twisted form during photo‐excitement. The straightened and twisted forms of the molecule are represented as logic ‘0’ and logic ‘1’, respectively. This p and n regions of this switch has been made using electrical doping process. The current through the twisted form of the cytosine biomolecule is ∼1000 times higher than the straightened form. The maximum switching ratio 62.1 is obtained at 1 V bias. The origin of the switching behaviour of the biomolecule can be interpreted by quantum–ballistic transport model along with HOMO–LUMO gaps.Inspec keywords: ballistic transport, organic compounds, Green''s function methods, ab initio calculations, density functional theory, molecular biophysics, optical switches, single‐wall carbon nanotubes, electrochemical electrodesOther keywords: electrical doping process, cytosine biomolecule, electronic transport properties, single‐wall carbon nanotube electrodes, cytosine‐based optical molecular switch, density functional theory, electronic transmission, HOMO‐LUMO gaps, current–voltage characteristics, biomolecular switching behaviour, quantum–ballistic transport property model, electrically doped cytosine‐based optical molecular switch, first principle approach, nonequilibrium Green''s function, I‐V characteristics, highest occupied molecular orbital–lowest unoccupied molecular orbital gaps, single ON–OFF switching cycle, photoexcitement, frequency 25.0 THz, voltage 1.0 V, C     

Evidence for behavioural thermoregulation by the world's largest fish

Many fishes make frequent ascents to surface waters and often show prolonged surface swimming following descents to deep water. This affinity for the surface is thought to be related to the recovery of body heat lost at depth. We tested this hypothesis using data from time–depth recorders deployed on four whale sharks (Rhincodon typus). We summarized vertical movements into bouts of dives and classified these into three main types, using cluster analysis. In addition to day and night ‘bounce’ dives where sharks rapidly descended and ascended, we found a third type: single deep (mean: 340 m), long (mean: 169 min) dives, occurring in daytime with extremely long post-dive surface durations (mean: 146 min). Only sharks that were not constrained by shallow bathymetry performed these dives. We found a negative relationship between the mean surface duration of dives in the bout and the mean minimum temperature of dives in the bout that is consistent with the hypothesis that thermoregulation was a major factor driving use of the surface. The relationship broke down when sharks were diving in mean minimum temperatures around 25°C, suggesting that warmer waters did not incur a large metabolic cost for diving and that other factors may also influence surface use.     

Facile synthesis of α-Fe2O3 nanodisk with superior photocatalytic performance and mechanism insight

Intrinsic short hole diffusion length is a well-known problem for α-Fe₂O₃ as a visible-light photocatalytic material. In this paper, a nanodisk morphology was designed to remarkably enhance separation of electron-hole pairs of α-Fe₂O₃. As expected, α-Fe₂O₃ nanodisks presented superior photocatalytic activity toward methylene blue degradation: more than 90% of the dye could be photodegraded within 30 min in comparison with a degradation efficiency of 50% for conventional Fe₂O₃ powder. The unique multilayer structure is thought to play a key role in the remarkably improved photocatalytic performance. Further experiments involving mechanism investigations revealed that instead of high surface area, ·OH plays a crucial role in methylene blue degradation and that O^·2− may also contribute effectively to the degradation process. This paper demonstrates a facile and energy-saving route to fabricating homogenous α-Fe₂O₃ nanodisks with superior photocatalytic activity that is suitable for the treatment of contaminated water and that meets the requirement of mass production.     

Label-free magnetic resonance imaging to locate live cells in three-dimensional porous scaffolds

Porous scaffolds are widely tested materials used for various purposes in tissue engineering. A critical feature of a porous scaffold is its ability to allow cell migration and growth on its inner surface. Up to now, there has not been a method to locate live cells deep inside a material, or in an entire structure, using real-time imaging and a non-destructive technique. Herein, we seek to demonstrate the feasibility of the magnetic resonance imaging (MRI) technique as a method to detect and locate in vitro non-labelled live cells in an entire porous material. Our results show that the use of optimized MRI parameters (4.7 T; repetition time = 3000 ms; echo time = 20 ms; resolution 39 × 39 µm) makes it possible to obtain images of the scaffold structure and to locate live non-labelled cells in the entire material, with a signal intensity higher than that obtained in the culture medium. In the current study, cells are visualized and located in different kinds of porous scaffolds. Moreover, further development of this MRI method might be useful in several three-dimensional biomaterial tests such as cell distribution studies, routine qualitative testing methods and in situ monitoring of cells inside scaffolds.     

Quantification of the passive and active biaxial mechanical behaviour and microstructural organization of rat thoracic ducts

Mechanical loading conditions are likely to play a key role in passive and active (contractile) behaviour of lymphatic vessels. The development of a microstructurally motivated model of lymphatic tissue is necessary for quantification of mechanically mediated maladaptive remodelling in the lymphatic vasculature. Towards this end, we performed cylindrical biaxial testing of Sprague–Dawley rat thoracic ducts (n = 6) and constitutive modelling to characterize their mechanical behaviour. Spontaneous contraction was quantified at transmural pressures of 3, 6 and 9 cmH₂O. Cyclic inflation in calcium-free saline was performed at fixed axial stretches between 1.30 and 1.60, while recording pressure, outer diameter and axial force. A microstructurally motivated four-fibre family constitutive model originally proposed by Holzapfel et al. (Holzapfel et al. 2000 J. Elast. 61, 1–48. (doi:10.1023/A:1010835316564)) was used to quantify the passive mechanical response, and the model of Rachev and Hayashi was used to quantify the active (contractile) mechanical response. The average error between data and theory was 8.9 ± 0.8% for passive data and 6.6 ± 2.6% and 6.8 ± 3.4% for the systolic and basal conditions, respectively, for active data. Multi-photon microscopy was performed to quantify vessel wall thickness (32.2 ± 1.60 µm) and elastin and collagen organization for three loading conditions. Elastin exhibited structural ‘fibre families’ oriented nearly circumferentially and axially. Sample-to-sample variation was observed in collagen fibre distributions, which were often non-axisymmetric, suggesting material asymmetry. In closure, this paper presents a microstructurally motivated model that accurately captures the biaxial active and passive mechanical behaviour in lymphatics and offers potential for future research to identify parameters contributing to mechanically mediated disease development.