共查询到19条相似文献,搜索用时 734 毫秒
1.
张爽松 《石油化工腐蚀与防护》2004,21(2):30-33
针对制氢转化炉炉管多次开裂失效的情况,进行了宏观分析、化学分析以及金相分析.结果表明,高温操作及短时局部过热是炉管发生高温蠕变失效的直接原因,而氢损伤加速了转化炉炉管的脆化.加强平稳操作,尽可能减少紧急开停工次数可减少上述失效事例的发生. 相似文献
2.
3.
高温制氢转化炉炉管的主要损坏形式为蠕变损伤。该文分析了蠕变损伤的形成原因及影响因素;应用超声波透射法对某化工厂的4套装置200余根制氢转化炉炉管进行检测;根据检测结果确定转化炉炉管的损伤情况,对炉管的在役检测和评价具有一定的参考价值。 相似文献
4.
《石油化工设备技术》2018,(6)
制氢转化炉炉管在高温火焰、烟气等环境下运行,炉管易产生损伤。文章分析了转化炉管3次水浸超声波检测的结果,并结合转化炉结构和运行情况,研究了炉管损伤部位的分布特点,阐述了这一特点产生的原因,提出了在转化炉运行时巡检、炉管水浸超声波检测及其它方法检测炉管时应优先考虑的炉管检测部位,提高炉管检测的有效性,确保转化炉安全平稳运行。 相似文献
5.
张庆武 《石油化工设备技术》2010,31(1):45-47
制氢转化炉炉管服役38600h后出现空洞失效,对试样进行宏观检查、化学成分分析、常温及高温力学性能试验、常温冲击试验及金相组织、能谱分析等检验,得出炉管失效真正原因并为下一步生产提出防范措施。 相似文献
6.
7.
8.
《石油化工设备技术》2016,(2)
某炼油化工厂5.5万t/a制氢装置转化炉辐射段材质为ZG40Cr25Ni35Nb-Ti的合金钢炉管,在使用1.7万h后发生突然开裂(设计使用寿命10万h)。文章对炉管进行失效分析后认为,由于局部过热导致的蠕变开裂是主要原因。按照装置原始设计工况,转化气出口温度870℃,转化炉炉管外壁最高耐温不大于960℃。而实际操作工况下当转化气出口温度只有845℃,炉管外壁温度已经达到970~990℃,超过了炉管最大承受温度960℃,造成炉管局部过热开裂,为此提出了相应的对策措施。 相似文献
9.
10.
针对典型的制氢装置转化炉炉管,阐述了其腐蚀介质及原因,指出了高温蠕变、高温氧化、应力腐蚀、渗碳和脱碳以及Cl~-腐蚀是造成转化炉炉管破坏的主要原因。控制原料气中Cl~-的质量分数,选择适宜的过渡段炉管材质并严格控制转化炉运行参数,可使腐蚀得到控制。 相似文献
11.
12.
13.
随着Macha遥爆系统在地震勘探中使用年限的增加,该系统在工作中时常出现各种各样的故障,本文根据其日常检修记录,分析总结了Macha系统常见的十一例故障,并从故障的现象、分析、排除三个方面对各个故障进行了详细的介绍。 相似文献
14.
Exposure Assessment based on a combination of event and fault tree analyses and predictive modelling
《Food Control》2010,21(10):1338-1348
Predictive modelling is a scientific discipline that permits assessment of the impact of process stage deviations when integrated in a stage of the food chain. Predictive modelling is traditionally used to assess the exposure of consumers to the presence of hazards, e.g. Listeria monocytogenes due to the occurrence of deviations in the food chain. However, failures related to food safety can occur through the food chain and are not captured by predictive models, e.g. failure of process conditions, incorrect inspections or analyses, etc. Therefore, to address both deviations and failures, predictive modelling must be combined with other techniques. This paper presents a new approach based on a combination of traditional predictive modelling, and event/fault tree analysis techniques, which allow the representation of normal and abnormal (i.e. failures) variations of parameters throughout the food chain for a better estimation of the real impact of such deviations and failures on consumer safety. A combination of event tree and fault tree analysis techniques is adopted to represent a failure anywhere in the food chain, also including failures in the processing parameters in the food industry. For the sake of clarity in the introduction of this approach, an application example is presented considering pasteurized milk, in which human exposure to L. monocytogenes is assessed. 相似文献
15.
16.
17.
崔建国 《石油化工腐蚀与防护》2011,28(1):37-39
埕岛油田海底管线在生产过程中出现了断裂。通过对海管断裂原因进行调查分析,认为环境载荷(如风、浪、地震等)的作用,海上作业引起的外力破坏以及疲劳断裂是引起海管失效的主要原因。实现海管自动化检测、增设清管装置、加强悬空治理以及提高管材质量可有效防止断管事故发生。 相似文献
18.