基于分块导频的SC-FDE信道估计算法改进

随着计算机科学技术的不断发展,分块导频的SC-FDE信道估计算法受到了越来越多的重视。信道估计与频域均衡是单载波频域均衡（SC-FDF）系统的两大关键技术。其中,信道均衡是通过对估计出的信道衰减特征进行补偿,从而减小信号在传输过程中所受外界的影响,信道估计与频域均衡性能的好坏共同决定系统最后均衡的效果。因此,研究基于分块导频的SC-FDE信道估计算法改进具有非常重大的意义。本文介绍了SC-FDE系统和SC-FDE系统模型,阐述了信道估计和理论分析,并且进行了理论分析和信道与噪声方差估计,最后分析了系统仿真结果。     

单载波频域均衡技术研究

介绍了单载波频域均衡(SC-FDE)的原理和均衡实现的过程,并采用时域 LS 信道估计算法对频域均衡性能进行了仿真。     

基于PSP均衡技术的CPM检测算法

针对时变频率选择性衰落信道,研究了连续相位调制（CPM）信号的逐幸存检测算法。该算法在未知信道状态的条件下,利用训练序列对信道参数进行初始估计。在对CPM信号进行Viterbi解调过程中,采用PSP技术实现信道的无延时跟踪。基于频域均衡的CPM检测算法虽然可以有效抗多径干扰且计算复杂度较低,但不能对时变信道进行跟踪。仿真结果表明,在时变多径信道下,基于PSP均衡的CPM检测算法能有效地进行信道参数估计,比频域均衡算法具有更好的误码性能。     

基于RLS的MIMO OFDM自适应信道估计

依据最小均方误差准则提出了基于多相正交序列循环移位和基于重复相位旋转Chu两种训练序列设计方法,并给出了相应的最小二乘(RLS)自适应信道估计算法。首先用简单的LS算法对信道进行初步估计,然后采用RLS算法进行自适应滤波器提高信道估计的性能,最后,将滤波后得到的时域信道估计经过FFT变换为频域信道响应,并对OFDM数据符号进行频域均衡。与传统单一的信道估计技术相比,该方法具有较低的复杂度和较好的估计性能,仿真实验证明了该算法的有效性。     

OFDM系统中基于PN的信道估计算法及FPGA设计

根据伪随机噪声（PN）序列的相关特性，介绍一种OFDM系统中在时域利用PN序列的循环相关对信道进行估计的算法，并利用周期序列的循环卷积特性对接收数据进行频域均衡。最后列出其FPGA设计流程和仿真图形。     

单载波频域均衡信道估计分析

针对高速率信息传输系统中多径衰落对单载波频域均衡(SC-FDE)信道估计造成的影响,在SC-FDE原理基础上,将无线通信中信噪比估计和SC-FDE中信道估计结合起来,对现有信噪比估计算法进行优化。分析和仿真结果表明,此方法能有效地改善多径衰落信道中信道估计的有效性,提高了频域均衡的效果,从而改善了SC-FDE系统的误码率(BER)性能。     

基于叠加训练序列和低复杂度频域Turbo均衡的时变水声信道估计和均衡

针对时变水声信道估计和均衡问题,该文提出基于叠加训练序列(ST)和低复杂度频域Turbo均衡(LTE)的时变水声信道估计和均衡(ST-LTE)算法。基于叠加训练序列方案,将训练序列和符号线性叠加,使得训练序列和符号信道信息一致;基于最小二乘算法,进行信道估计。基于频域训练序列干扰消除技术,在频域消除训练序列对符号的干扰;基于频域线性最小均方误差(LMMSE)均衡算法,通过先验、后验、外均值和方差的计算,实现低复杂度信道均衡(符号估计);基于Turbo均衡算法,软重构叠加训练序列和更新信道估计,进行均衡器和译码器的信息交换,利用编码冗余信息,大幅度提升信道均衡性能。进行仿真、水池静态通信试验(通信频率12 kHz,带宽6 kHz,采样频率96 kHz,符号传输速率4.8 ksym/s,训练序列和符号的功率比为0.25:1)和胶州湾运动通信试验(通信频率12 kHz,带宽6 kHz,采样频率96 kHz,符号传输速率3 ksym/s,训练序列和符号的功率比为0.25:1),仿真和试验结果验证了所提算法的有效性。     

基于STBC-SCFDE系统的信道估计算法研究

针对频率选择性衰落信道下2发射天线的空时分组编码-单载波频域均衡(STBC-SCFDE)系统,分别设计了2种新颖的时域多天线导频序列和频域多天线导频序列,相应地提出了一种时域导频信道估计算法和一种频域导频信道估计算法,并分别进行了信道估计的MSE性能分析以及计算复杂度对比.仿真验证表明,相比传统经典多天线信道估计算法,所提2种信道算法在中低信噪比下均能实现良好的信道估计性能,为未来无线通信系统的信道估计开辟了新的解决途径.     

基于叠加训练序列和低复杂度频域Turbo均衡的时变水声信道估计和均衡

针对时变水声信道估计和均衡问题,该文提出基于叠加训练序列(ST)和低复杂度频域Turbo均衡(LTE)的时变水声信道估计和均衡(ST-LTE)算法.基于叠加训练序列方案,将训练序列和符号线性叠加,使得训练序列和符号信道信息一致;基于最小二乘算法,进行信道估计.基于频域训练序列干扰消除技术,在频域消除训练序列对符号的干扰;基于频域线性最小均方误差(LMMSE)均衡算法,通过先验、后验、外均值和方差的计算,实现低复杂度信道均衡(符号估计);基于Turbo均衡算法,软重构叠加训练序列和更新信道估计,进行均衡器和译码器的信息交换,利用编码冗余信息,大幅度提升信道均衡性能.进行仿真、水池静态通信试验(通信频率12 kHz,带宽6 kHz,采样频率96 kHz,符号传输速率4.8 ksym/s,训练序列和符号的功率比为0.25:1)和胶州湾运动通信试验(通信频率12 kHz,带宽6 kHz,采样频率96 kHz,符号传输速率3 ksym/s,训练序列和符号的功率比为0.25:1),仿真和试验结果验证了所提算法的有效性.     

基于导频的OFDM系统信道估计算法研究及实现

介绍了基于导频的OFDM系统信道估计方法,对典型估计方法的算法复杂性进行了分析比较,并在此基础上给出了频域导频时域平均信道估计算法的硬件电路FPGA实现方案,对FPGA设计的主要模块进行了详细说明,以Altera的StratixⅡ芯片为平台完成仿真和综合.系统分析和FPGA电路综合结果表明:相比传统的频域信道估计算法,该算法节省资源,更利于硬件实现.     

基于通道均衡的频域除法研究

在频域通道均衡中,一个关键技术是求解均衡滤波器的响应.文中利用循环卷积和离散傅里叶变换乘积之间的关系,研究了通道均衡中频域除法的两类求解法:一类是时域算法,包括循环矩阵伪逆求解法和循环卷积求循环反卷积算法;另一类是基于最小范数的矩阵形式的频域算法.借助于仿真数据,根据求得的均衡滤波器和待校滤波器的卷积对参考滤波器的逼近误差,验证了上述算法的有效性.实验结果表明,基于最小范数的矩阵形式的频域算法在逼近性能、实时性方面均优于上面两种时域算法.     

SC-FDE宽带航空数传接收机的设计与实现

为满足航空信道条件下的远距离宽带数据传输需求,基于单载波频域均衡传输(SC-FDE)体制,采用8 PSK调制体制进行了宽带数字接收机的设计,包括传输帧同步、载波同步、定时同步、信道估计和频域均衡.同时,为保证灵活应用的需求,采用数字内插的方式进行了可变传输速率设计.基于Xilinx现场可编程门阵列(FPGA)平台对硬件实现进行优化,最终实现了传输速率能够从112.5 Mbit/s覆盖到900 Mbit/s的数传接收机.仿真分析和硬件测试结果表明,该接收解调设备能够实现很好的性能指标,同时SC-FDE架构具备有效补偿多径传播影响的能力,适合应用于高动态无线宽带航空数据传输系统中.     

引入直接序列扩频的线列阵通信信道均衡技术

在空间多径信道垂直线列阵通信中,由于多阵元码间干扰导致信道失衡,误码率较高,需要进行信道均衡设计。传统方法采用随机码扩频方法进行通信信道均衡,扩频信号经高放和混频后导致非线性失真,均衡效果不佳。文中提出一种基于直接序列扩频的线列阵通信信道均衡算法。基于PTRM技术构建了垂直线列阵通信的空间多径信道模型,采用直接序列扩频方法设计码间干扰抑制算法,利用垂直线列阵结构对PTRM时间压缩性能,接收到的扩频信号经高放和混频后,对中频扩频的调制信号进行相关解扩,重组多垂直线列阵的径分量,实现信道均衡。仿真结果表明,采用该算法进行垂直线列阵通信,信道均衡性能和码间干扰抑制性能较好,并有效降低了误比特率,改善了通信质量。     

基于DTTB单载波频域均衡技术研究

分析了中国数字电视地面广播标准中的系统帧结构,并根据信号帧头的循环特性,提出了一种性能较好的信道估计 算法;分析了传统的单载波均衡算法的优缺点,提出了一种联合频域均衡和时域判决反馈的均衡技术;最后对U1信道进行仿 真,并对仿真结果进行分析总结.     

SC-FDE系统中信道估计和均衡算法的研究和实现

为了克服多径信道下码间串扰带来的影响,本文对SC-FDE系统中的信道估计和均衡算法进行研究。首先分析了DFT插值算法原理,提出采用格雷互补序列估计信道频率响应的方法,然后对MMSE均衡估计参数进行了详细推导,最后通过Matlab对均衡算法中时域滤波进行仿真验证,结果表明该方法能够有效滤除噪声,提升多径信道下系统接收性能,具有一定的应用价值。     

An equalization algorithm for wavelet packet based modulationschemes

A considerable amount of attention has been given in the literature to the use of wavelets for modulation and equalization. In this correspondence, we present an equalization algorithm for a wavelet packet-based modulation scheme. A nonideal channel can be divided into a set of bands, where each band can be approximated as a simple attenuation and delay channel. Wavelet packets, being narrowband and orthonormal, are a natural choice for realizing such bands. Thus, if the data sequence is used to modulate a set of wavelet packets, the equalization problem reduces to that of determining the delay introduced by the channel for each of the wavelet packets (if the wavelet packets do not overlap in the frequency domain) and possibly a change of sign in the decoded symbols. The attenuation affects the SNR at the output of the demodulator, which in turn affects the correct decoding of the transmitted symbols. A minimum square variance algorithm for adaptively choosing the delay has been proposed. The algorithm uses the statistics of the received sequence to pick the appropriate delay. Simulations have been conducted to study the performance of the equalization algorithm and compare it with that of DFT-based DMT scheme     

A step-by-step quasi-Newton algorithm in the frequency domain and its application to adaptive channel equalization

In this paper, a new efficient adaptive filtering algorithm belonging to the Quasi-Newton (QN) family is proposed. In the new algorithm, the involved inverse Hessian matrix is approximated by a proper expansion, consisting of powers of a Toeplitz matrix. Due to this formulation, the algorithm can be implemented in the frequency domain (FD) using the fast Fourier transform (FFT). Efficient recursive relations for the frequency domain quantities updated on a step-by-step basis have been derived. The proposed algorithm turns out to be particularly suitable for adaptive channel equalization in wireless burst transmission systems. Based on this approach, new adaptive linear equalization (LE) and decision feedback equalization (DFE) algorithms have been developed. These algorithms enjoy the combined advantages of QN formulation and FD implementation, exhibiting faster convergence rate than their stochastic gradient counterparts and less computational complexity, as compared with other Newton-type algorithms.     

Improved Frequency Domain Channel Estimation and Equalization for MIMO Wireless Communications

This paper introduces an improved frequency domain channel estimation method based on interpolation vectors for single carrier frequency domain equalization (SC-FDE) with the multiple-input multiple-output (MIMO) scheme. The proposed algorithm is derived by employing the least squares (LS) criterion, and a specified application for the wide sense stationary uncorrelated scattering (WSSUS) Rayleigh fading channel is presented. The channel frequency domain responses estimated at two adjacent pilot blocks are used to track the time-variant channel information, which can effectively improve the accuracy of channel estimation without significantly increasing complexity. Maximum mean square error (MMSE) frequency domain equalization based on the estimated channel is employed in the receiver to recover transmitted signals. This paper also investigates a training sequence design method for multiple transmit antennas and a noise variance estimation method. Numerical simulation results show that the proposed methods can perform very well for fading channels with long multipath delay and high Doppler spread.     

Blind chip-level equalizer for the downlink of cyclic-prefix CDMA systems

The authors present a chip-level blind frequency domain equalizer (FEQ) for the forward-link channel of a cyclic-prefix code division multiple access system. The FEQ coefficients are obtained without the need of training symbols or knowledge of channel state information. The coefficients are instead acquired by solving a constraint energy minimization problem involving the subspace spanned by the active and passive spreading codewords. They also prove that the random scrambling code sequences is required for the operation of the proposed equalization algorithm. Results from computer simulations are provided to verify the performance of the proposed FEQ.