智能生活真享受 三星ES8000液晶电视

曾几何时，我们幻想过著电视的时候说句话就可以换台．挥挥手就可以调节音量大小．轻轻一点手机、相机．笔记本里的内容即可在大屏幕上播放。     

诊所

求助手机狼！前些天买了一个水木行的红外适配器IR650，安装一切正常，但就是检测不到我的OT756，换台电脑也不行。先怀疑是手机问题，但今天试了手机对手机发送正常，而且前几天连接笔记本电脑也正常，另外拿一部T618试一下，也能够检测到手机，是不是IR650不支持OT765啊？但看到大家都在用，应该是支持的，这究竟是什么原因呢。     

DVB-C数字机顶盒优化换台机制的实现

研究了传统换台机制的原理和流程,并指出其不足.结合项目的实践,采用数据流和控制流分离的思想并基于任务调度和消息机制的设计方法,设计实现了一种优化的DVB-C数字机顶盒换台机制.最后,通过试验证明了该设计的可行性和先进性.     

用NE555实现有线数字电视自动换台的应用

从各地广电有线数字电视节目监视的现状出发,在简介数字电视机顶盒人工换台与自动换台原理、阐述CD4066典型四双向模拟开关集成电路和NE555定时器集成电路的基础上,介绍了一种简易的自动换台电路及其应用于同洲、创维、九州等有线数字电视机顶盒的改装实践和在地市级数字电视网中的具体应用,并就其在多领域的应用谈了笔者的观点.     

"韩流"退去"台风"来袭

90年代末,一部《蓝色生死恋》让无数的大陆观众第一次见识了韩剧的威力,舒缓的节奏、凄美的爱情、标致的俊男美女,不论你怎么换台,都还是想扭头再多看两眼.……     

基于特征选择的Android终端手势控制算法

随着信息化和人工智能技术的迅猛发展,手势识别和控制技术已经引起了越来越多的关注。人工智能领域通常会将该技术应用到Android终端,实现电视机的手势换台、手势音量调节、手机的开关机、开锁屏等人机交互功能。文章介绍一种基于特征选择谱聚类的Android终端手势识别算法,通过预制手势图像库,终端摄像头采集手势图像并加以预处理,然后基于谱聚类的图像分割与识别获取手势信息,并指挥电视机执行用户手势信息,可准确、高效、便捷地实现Android终端手势控制功能。     

全风牌C37－6型彩电AGC电路故障检修一例

全风牌Ｃ３７－６型彩电ＡＧＣ电路故障检修一例金风牌Ｃ３７—６型彩电，当不接天线时，换台收看各频道节目时均正常，但图象清晰度较差（即信号较弱）。当接上天线时，图象无（即不同步），声音正常，如再拔插一下天线，图象恢复正常，清晰度较高，声音仍正常。如果换台...     

二代F3多用途高清机好事成双

二代F3天生的优越条件,决定了它一出世就不同凡响。除了前两期介绍的卫星、无线、有线三合一无缝换台、艺华搭载之外,还有1080P视频输出、AVS解码等功能,这些都是市面上同类机器不具备的。二代F3支持两块三合一调谐板,也就是卫星、无线、有线都是独立的双输入端,真正实现了一路录像的同时,选择任意一路观看。还能玩画中画和画外画,两路都可以分别换台,一机当两机用。     

AltDVB2.2版本卫星多媒体接收软件

AltDVB是罗马尼亚人开发的一款优秀的卫星电视多媒体接收卡应用软件,换台速度超快,是播放卫视信号的首选。官方网站上最新可以下载的为2.1版本,但从其它     

EPG换台广告精准投放辅助方法

本文提出了EPG换台广告精准投放辅助方法,构造了包含用户数据摄取单元、数据分析单元和推荐EPG广告信息发送单元的精准投放结构。广告精准投放分析法采用用户特征分析和EPG换台广告投放分析两种方法,通过观众收视行为刻画收视特征,进而在全网数据中获得收视人群的潜在消费倾向,提供给广告商相应辅助决策数据,实现给观众个体或全网范围投放符合其潜在消费倾向的EPG广告。     

Resolution Enhancement Technology:Integrated Process Solutions using OPC

DUV lithography, using the 248 nm wavelength, is a viable manufacturing option for devices with features at 130 nm and less. Given the low kl value of the lithography, integrated process development is a necessary method for achieving acceptable process latitude. The application of assist features for rule based OPC requires the simultaneous optimization of the mask, illumination optics and the resist.Described in this paper are the details involved in optimizing each of these aspects for line and space imaging.A reference pitch is first chosen to determine how the optics will be set. The ideal sigma setting is determined by a simple geometrically derived expression. The inner and outer machine settings are determined, in turn,with the simulation of a figure of merit. The maximum value of the response surface of this FOM occurs at the optimal sigma settings. Experimental confirmation of this is shown in the paper.Assist features are used to modify the aerial image of the more isolated images on the mask. The effect that the diffraction of the scattering bars (SBs) has on the image intensity distribution is explained. Rules for determining the size and placement of SBs are also given.Resist is optimized for use with off-axis illumination and assist features. A general explanation of the material' s effect is discussed along with the affect on the through-pitch bias. The paper culminates with the showing of the lithographic results from the fully optimized system.     

Cost-effective test solutions for smart card and other integrated flash applications

From its emergence in the late 1980s as a lower cost alternative to early EEPROM technologies, flash memory has evolved to higher densities and speedsand rapidly growing acceptance in mobile applications.In the process, flash memory devices have placed increased test requirements on manufacturers. Today, as flash device test grows in importance in China, manufacturers face growing pressure for reduced cost-oftest, increased throughput and greater return on investment for test equipment. At the same time, the move to integrated flash packages for contactless smart card applications adds a significant further challenge to manufacturers seeking rapid, low-cost test.     

Theoretical analysis of the relationship between the Brillouin gain coefficient and the strain in the optical-fiber sensors

The relation between the power of the Brillouin signal and the strain is one of the bases of the distributed fiber sensors of temperature and strain. The coefficient of the Bfillouin gain can be changed by the temperature and the strain that will affect the power of the Brillouin scattering. The relation between the change of the Brillouin gain coefficient and the strain is thought to be linear by many researchers. However, it is not always linear based on the theoretical analysis and numerical simulation. Therefore, errors will be caused if the relation between the change of the Brillouin gain coefficient and the strain is regarded as to be linear approximately for measuring the temperature and the strain. For this reason, the influence of the parameters on the Brillouin gain coefficient is proposed through theoretical analysis and numerical simulation.     

An improved parallel thinning algorithm with two subiterations

The parallel thinning algorithm with two subiterations is improved in this paper. By analyzing the notions of connected components and passes, a conclusion is drawn that the number of passes and the number of eight-connected components are equal. Then the expression of the number of eight-connected components is obtained which replaces the old one in the algorithm. And a reserving condition is proposed by experiments, which alleviates the excess deletion where a diagonal line and a beeline intersect. The experimental results demonstrate that the thinned curve is almost located in the middle of the original curve connectivelv with single pixel width and the processing speed is high.     

Novel fiber-optical interferometer with miniaturized probe for in-hole measurements

Today, micro-system technology and the development of new MEMS （Micro-Electro-Mechanical Systems） are emerging rapidly. In order for this development to become a success in the long run, measurement systems have to ensure product quality. Most often, MEMS have to be tested by means of functionality or destructive tests. One reason for this is that there are no suitable systems or sensing probes available which can be used for the measurement of quasi inaccessible features like small holes or cavities. We present a measurement system that could be used for these kinds of measurements. The system combines a fiber optical, miniaturized sensing probe with low-coherence interferometry, so that absolute distance measurements with nanometer accuracy are possible.     

Development of the readout system for waveguide multilayer optical card

Waveguide multilayer optical card （WMOC） is a novel storage device of three-dimensional optical information. An advanced readout system fitting for the WMOC is introduced in this paper. The hardware mainly consists of the light source for reading, WMOC, motorized stages addressing unit, microscope imaging unit, CCD detecting unit and PC controlling ＆ processing unit. The movement of the precision motorized stage is controlled by the computer through Visual Basic （VB） language in software. A control panel is also designed to get the layer address and the page address through which the position of the motorized stages can be changed. The WMOC readout system is easy to manage and the readout result is directly displayed on computer monitor.     

Study of waveguide coupling efficiency in hybrid silicon lasers

This paper presents a new method to increase the waveguide coupling efficiency in hybrid silicon lasers. We find that the propagation constant of the InGaAsP emitting layer can be equal to that of the Si resonant layer through improving the design size of the InP waveguide. The coupling power achieves 42% of the total power in the hybrid lasers when the thickness of the bonding layer is 100 nm. Our result is very close to 50% of the total power reported by Intel when the thickness of the thin bonding layer is less than 5 nm. Therefore, our invariable coupling power technique is simpler than Intel＇s.     

Collinear phase-matching study of terahertz-wave generation via difference frequency mixed in GaAs and Inp

The collinearly phase-matching condition of terahertz-wave generation via difference frequency mixed in GaAs and InP is theoretically studied. In collinear phase-matching, the optimum phase-matching wave hands of these two crystals are calculated. The optimum phase-matching wave bands in GaAs and lnP are 0.95-1.38μm and 0.7-0.96μm respectively. The influence of the wavelength choice of the pump wave on the coherent length in THz-wave tuning is also discussed. The influence of the temperature alteration on the phase-matching and the temperature tuning properties in GaAs crystal are calculated and analyzed. It can serve for the following experiments as a theoretical evidence and a reference as well.     

Effects of the alloy compositions on the phonon-polaritons in ternary mixed crystals

Composition dependence of bulk and surface phonon-polaritons in ternary mixed crystals are studied in the framework of the modified random-element-isodisplacement model and the Bom-Huang approximation. The numerical results for Several Ⅱ - Ⅵ and Ⅲ- Ⅴ compound systems are performed, and the polariton frequencies as functions of the compositions for ternary mixed crystals AlxGa1-xAs, GaPxAS1-x, ZnSxSe1-x, GaAsxSb1-x, GaxIn1-xP, and ZnxCd1-xS as examples are given and discussed. The results show that the dependence of the energies of two branches of bulk phonon-polaritons which have phonon-like characteristics, and surface phonon-polaritons on the compositions of ternary mixed crystals are nonlinear and different from those of the corresponding binary systems.     

New insert layer structure OLEDs

An insert layer structure organic electroluminescent device（OLED） based on a new luminescent material （Zn（salen）） is fabricated. The configuration of the device is ITO/CuPc/NPD/Zn（salen）/Liq/LiF/A1/CuPc/NPD/Zn（salen）/Liq/LiF/A1. Effective insert electrode layers comprising LiF（1nm）/Al（5 nm） are used as a single semitransparent mirror, and bilayer cathode LiF（1 nm）/A1（100 nm） is used as a reflecting mirror. The two mirrors form a Fabry-Perot microcavity and two emissive units. The maximum brightness and luminous efficiency reach 674 cd/m^2 and 2.652 cd/A, respectively, which are 2.1 and 3.7 times higher than the conventional device, respectively. The superior brightness and luminous efficiency over conventional single-unit devices are attributed to microcavity effect.