共查询到20条相似文献,搜索用时 109 毫秒
1.
2.
3.
党的十七大报告指出,要深入贯彻落实科学发展观,坚持全面协调可持续发展,坚持节约能源和保护环境的基本国策,把建设资源节约型、环境友好城市型社会放在工业化、现代化发展战略的突出位置,落实节能减排工作责任制,发展清洁能源和可再生能源,保护土地和水资源,建设科学合理的能源资源利用体系,提高能源资源利用效率。近几年来,中国铝业贵州分公司坚持贯彻落实科学发展观,走可持续发展之路、走新型工业化之路,在企业快速发展的同时,高度重视节能减排,全面推行清洁生产,致力发展循环经济,在全国铝工业行业中率先实现了工业废水零排放,取得了提产、降耗、减污、增效的多赢效果。 相似文献
4.
5.
黄凌 《有色金属再生与利用》2014,(2):77-78
当我们从莫斯科启程前往格鲁吉亚共和国首府第比利斯市进行学术交流的时候,莫斯科还铺盖着厚厚的白雪,天空阴沉沉的,整天飘舞着雪花,白天的气温达到零下二十多度。然而,经过两个半小时的航行,当飞机越过乌克兰大地,把我们载送到南高加索山脉上空,飞临第比利斯的时候,温和的阳光却沐浴着南高加索。透过飞机的舷窗可以望见第比利斯市沉浸在绿树如荫的海洋里,这里似乎永远没有冬天,终年是暖融融的。一个童话般的小城,就像人们所描绘的那样,我感受到了同一时段的不同季节, 相似文献
6.
7.
从目前看,我国铜产品的外贸将在较长的时期内延续目前的外贸政策,因此,铜行业应顺应形势,不断调整行业的外贸产品结构,促进行业内部的重组,并购,做大做强,不断提升行业及其产品的外贸竞争能力,促进行业的健康发展。 相似文献
9.
10.
11.
转炉出钢过程常伴有钢水回磷现象,导致钢水磷含量上升甚至出格,影响钢材成品质量和经济技术指标。为有效控制转炉出钢过程回磷,通过现场取样、数据采集、模拟试验及FactSage软件分析了出钢过程钢水回磷机理,研究探讨了渣中FeO、SiO2、出钢温度、钢包渣碱度对回磷的影响。研究结果表明,出钢过程下渣,渣中FeO含量与出钢温度过高,钢包渣SiO2含量与碱度不在合适范围均会增大钢水回磷率,最高达41%。结合水钢生产实践,出钢温度控制为1 625~1 640 ℃、转炉终渣FeO质量分数为15%、钢包渣碱度为3.6~4.1、控制含硅合金加入、控制出钢过程下渣量的条件下,可高效调节出钢过程回磷,将回磷率降低至15%以下。通过控制出钢温度、终渣FeO、碱度等,可有效降低因下渣导致的回磷。 相似文献
12.
多元光谱拟合ICP-AES法同时测定铂中22个杂质元素 总被引:1,自引:0,他引:1
试样用HCl-HNO3溶解,采用多元光谱拟合(MSF)功能ICP-AES法同时测定铂中22个杂质元素:Pd、Rh、Ir、Ru、Au、Ag、Cu、Fe、Zn、Ni、Mn、Cr、Mg、Cd、Al、Ca、Pb、Sn、Bi、Si、Mo、Ti。对基体铂的影响、MSF功能、元素分析谱线、背景校正、仪器分析参数等进行了研究,确定了最佳实验条件。杂质元素测定范围Ag、Pd、Cu、Cr、Ti、Mn和Mo为0.0004%~0.05%;Rh、Ir、Pb、Fe、Mg、Al、Zn、Si、Bi、Ca、Cd、Sn、Au和Ni为0.0005%~0.05%;Ru为0.001%~0.05%;方法的相对标准偏差(RSD)和加标回收率分别为1.5%~8.1%和85.1%~118.5%。方法准确、快速、简便,已用于铂中杂质元素的分析。 相似文献
13.
目的: 总结重组人p53 腺病毒注射液(rAdp53)治疗的晚期实体肿瘤患者的资料, 初步评价其安全性与疗效。方法: 常规治疗失败的晚期实体肿瘤患者24 例, 其中肾癌5 例, 鼻咽癌4 例, 结直肠癌4 例, 黑色素瘤2 例, 非小细胞肺癌1 例, 食管癌1例, 贲门癌1 例, 胸腺癌1 例, 十二指肠癌1 例, 甲状腺癌1 例, 胰腺癌1 例, 子宫内膜癌1 例, 横纹肌肉瘤1 例。rAd-p53 给药方案为1 ×1012VP/次, 每周1次, 4 次为1 疗程。给药途径包括瘤内注射、支气管内喷洒、腹腔内注射、动脉灌注和静脉滴注。联合化疗18 例, 联合放疗2 例, 联合同期放、化疗1 例, 联合腹部热疗和吉非替尼1 例, 联合免疫治疗1 例,rAd-p53 单药治疗1 例。结果: 24 例患者中因早期进展而停药1 例, 接受1 疗程治疗20 例, 2 疗程治疗2例, 5 疗程治疗1 例。在可评价的21 例中, 部分缓解(PR) 5 例, 稳定(SD) 5 例, 进展(PD) 11 例, 有效率23.8%(5/21), 疾病控制率47.6%(10/21)。常见不良反应为自限性、I ~ II 度注射部位疼痛、寒颤、发热和肌肉酸痛。III 度发热2 例, 联合化疗者发生III ~IV 度骨髓抑制4 例, 骨痛加剧2 例, 一过性低血压1例。结论: 晚期实体瘤患者可耐受rAd-p53 治疗, 有必要进一步设计临床试验, 确定rAd-p53 联合常规治疗的有效性。 相似文献
14.
随着北极航行的发展及极地资源开发的需要,如何提高极地海洋环境服役材料的摩擦学性能愈发重要。在极地海洋环境中,碎冰、冰层和海水中的腐蚀性物质会使材料受到摩擦磨损、腐蚀及其耦合的影响;低温潮湿环境会增加材料的脆性、使材料表面覆冰、改变材料的摩擦磨损机理;强紫外线会加速涂层老化;这些因素都会降低材料的耐磨性能,最终导致材料失效。因此,极地海洋环境服役材料的摩擦学与材料的性能、服役寿命息息相关。本文介绍了极地探索所面临的摩擦磨损问题;阐述了极地温度、极地海洋大气及海水成分、海冰运动和极地微生物等极地海洋环境特点及其对材料摩擦学性能的影响;重点介绍了金属材料、无机非金属材料、高分子材料在极地海洋环境下的摩擦学进展;探讨了提升材料在极地海洋环境下的耐磨防腐技术,如改性、表面修饰等;最后,结合极地海洋环境服役材料摩擦磨损研究中所面临的问题及发展趋势,对未来极地海洋服役材料的摩擦学研究工作进行展望。 相似文献
15.
16.
17.
It is well known that, in kinetics, the interaction between dislocations and interstitial solute normally exerts strong solute drag effect on dislocations, leading to strong solution hardening of the metals. However, due to the low mobility of interstitial solute in many metals, thermodynamic aspect of the interaction between dislocations and interstitial solute is often unobservable and omitted. It will be shown in this article by reviewing the H-induced behaviors in metal–H systems, especially the recent progress in Pd–H system that, when the interstitial solute atoms are highly mobile and able to collect in the vicinity of mobile dislocations easily, the scenario will be remarkably different. The interaction between dislocations and these highly mobile interstitial solute atoms, in thermodynamics, will reduce the line energy of dislocations and will facilitate the generation of dislocations, leading to an increase in dislocation density and an enhanced strain hardening of metals upon plastic deformation. 相似文献
18.
钢材生物腐蚀是钢材腐蚀形式的一种,是当今最为关注和热门的研究话题。采用文献综述的研究方法,对生物腐蚀及生物对钢材腐蚀及其防护的概念和内涵进行了准确地界定,回顾了我国钢材生物腐蚀的研究历程。对钢材生物腐蚀及其预防的研究文献进行了分类和归纳总结,概述了我国钢材生物腐蚀的机理研究。梳理了我国钢材生物腐蚀及其预防的方法:现场观察描述法、陈述研究法、评述研究法、实验研究法、实证分析研究法、文献综述法、原因分析研究法、预测研究法和对比研究法。综述了我国对钢材生物腐蚀的几个主要研究内容:钢材生物腐蚀的分类、钢材生物腐蚀原因、钢材生物腐蚀机理、钢材生物腐蚀行为和钢材生物腐蚀防护等。对照国外研究现状,客观评价我国研究与国外相比存在的优点和不足,指出了研究的切入点主要在于两个方面:一是没有深入探究多种腐蚀因子的耦合作用机制;二是生态环保且长效的防护技术有待于进一步研究。最后,展望了我国钢材生物腐蚀及其预防的研究方向。 相似文献
19.
An experimental investigation on effect of minimum quantity lubrication in machining AISI 1040 steel
N.R. Dhar M.T. Ahmed S. Islam 《International Journal of Machine Tools and Manufacture》2007,47(5):748-753
The growing demands for high productivity of machining need use of high cutting velocity and feed rate. Such machining inherently produces high cutting temperature, which not only reduces tool life but also impairs the product quality. Application of cutting fluids changes the performance of machining operations because of their lubrication, cooling, and chip flushing functions. But the conventional cutting fluids are not that effective in such high production machining, particularly in continuous cutting of materials likes steels. Minimum quantity lubrication (MQL) presents itself as a viable alternative for turning with respect to tool wear, heat dissipation, and machined surface quality. This study compares the mechanical performance of MQL to completely dry lubrication for the turning of AISI-1040 steel based on experimental measurement of cutting temperature, chip reduction coefficient, cutting forces, tool wears, surface finish, and dimensional deviation. Results indicated that the use of near dry lubrication leads to lower cutting temperature and cutting force, favorable chip–tool interaction, reduced tool wears, surface roughness, and dimensional deviation. 相似文献
20.
The need to accelerate materials design programs based on economical and efficient modeling techniques provides the framework
for the introduction of approximations in otherwise rigorous theoretical schemes. Several quantum approximate methods have
been introduced through the years, bringing new opportunities for the efficient understanding of complex multicomponent alloys
at the atomic level. As a promising example of the role that these methods might have in the development of complex systems,
in this work we discuss the Bozzolo-Ferrante-Smith (BFS) method for alloys and its application to a variety of multicomponent
systems for a detailed analysis of their defect and phase structure and their properties. Examples include the study of the
phase structure of new Ru-rich Ni-base superalloys, the role of multiple alloying additions in high temperature intermetallic
alloys, and interfacial phenomena in nuclear materials, highlighting the benefits that can be obtained from introducing simple
modeling techniques to the investigation of complex systems.
This article was presented at the Multi-Component Alloy Thermodynamics Symposium sponsored by the Alloy Phase Committee of
the joint EMPMD/SMD of The Minerals, Metals, and Materials Society (TMS), held in San Antonio, Texas, March 12-16, 2006, to
honor the 2006 William Hume-Rothery Award recipient, Professor W. Alan Oates of the University of Salford, UK. The symposium
was organized by Y. Austin Chang of the University of Wisconsin, Madison, WI, Patrice Turchi of the Lawrence Livermore National
Laboratory, Livermore, CA, and Rainer Schmid-Fetzer of the Technische Universitat Clausthal, Clauthal-Zellerfeld, Germany. 相似文献