A Simple Route to Porous Graphene from Carbon Nanodots for Supercapacitor Applications

A facile method to convert biomolecule‐based carbon nanodots (CNDs) into high‐surface‐area 3D‐graphene networks with excellent electrochemical properties is presented. Initially, CNDs are synthesized by microwave‐assisted thermolysis of citric acid and urea according to previously published protocols. Next, the CNDs are annealed up to 400 °C in a tube furnace in an oxygen‐free environment. Finally, films of the thermolyzed CNDs are converted into open porous 3D turbostratic graphene (3D‐ts‐graphene) networks by irradiation with an infrared laser. Based upon characterizations using scanning electron microscopy, transmission electron microscopy, X‐ray photoelectron spectroscopy, X‐ray diffraction, Fourier‐transform infrared spectroscopy, and Raman spectroscopy, a feasible reaction mechanism for both the thermolysis of the CNDs and the subsequent laser conversion into 3D‐ts‐graphene is presented. The 3D‐ts‐graphene networks show excellent morphological properties, such as a hierarchical porous structure and a high surface area, as well as promising electrochemical properties. For example, nearly ideal capacitive behavior with a volumetric capacitance of 27.5 mF L ^{? 1} is achieved at a current density of 560 A L ^{? 1}, which corresponds to an energy density of 24.1 mWh L ^{? 1} at a power density of 711 W L ^{? 1}. Remarkable is the extremely fast charge–discharge cycling rate with a time constant of 3.44 ms.     

Size‐Controlled Soft‐Template Synthesis of Carbon Nanodots toward Versatile Photoactive Materials

Size‐controlled soft‐template synthesis of carbon nanodots (CNDs) as novel photoactive materials is reported. The size of the CNDs can be controlled by regulating the amount of an emulsifier. As the size increases, the CNDs exhibit blue‐shifted photoluminescence (PL) or so‐called an inverse PL shift. Using time‐correlated single photon counting, ultraviolet photoelectron spectroscopy, and low‐temperature PL measurements, it is revealed that the CNDs are composed of sp² clusters with certain energy gaps and their oleylamine ligands act as auxochromes to reduce the energy gaps. This insight can provide a plausible explanation on the origin of the inverse PL shift which has been debatable over a past decade. To explore the potential of the CNDs as photoactive materials, several prototypes of CND‐based optoelectronic devices, including multicolored light‐emitting diodes and air‐stable organic solar cells, are demonstrated. This study could shed light on future applications of the CNDs and further expedite the development of other related fields.     

Recent Advances of Porous Graphene: Synthesis,Functionalization, and Electrochemical Applications

Graphene is a 2D sheet of sp² bonded carbon atoms and tends to aggregate together, due to the strong π–π stacking and van der Waals attraction between different layers. Its unique properties such as a high specific surface area and a fast mass transport rate are severely blocked. To address these issues, various kinds of 2D holey graphene and 3D porous graphene are either self‐assembled from graphene layers or fabricated using graphene related materials such as graphene oxide and reduced graphene oxide. Porous graphene not only possesses unique pore structures, but also introduces abundant exposed edges and accelerates mass transfer. The properties and applications of these porous graphenes and their composites/hybrids have been extensively studied in recent years. Herein, recent progress and achievements in synthesis and functionalization of various 2D holey graphene and 3D porous graphene are reviewed. Of special interest, electrochemical applications of porous graphene and its hybrids in the fields of electrochemical sensing, electrocatalysis, and electrochemical energy storage, are highlighted. As the closing remarks, the challenges and opportunities for the future research of porous graphene and its composites are discussed and outlined.     

A Top‐Down Strategy toward SnSb In‐Plane Nanoconfined 3D N‐Doped Porous Graphene Composite Microspheres for High Performance Na‐Ion Battery Anode

Engineering of 3D graphene/metal composites with ultrasmall sized metal and robust metal–graphene interfacial interaction for energy storage application is still a challenge and rarely reported. In this work, a facile top‐down strategy is developed for the preparation of SnSb‐in‐plane nanoconfined 3D N‐doped porous graphene networks for sodium ion battery anodes, which are composed of several tens of interconnected empty N‐graphene boxes in‐plane firmly embedded with ultrasmall SnSb nanocrystals. The all‐around encapsulation (plane‐to‐plane contact) architecture that provides a large interface between N‐graphene and SnSb nanocrystal not only effectively enhances the electron conductivity and structural integrity of the overall electrode, but also offers excess interfacial sodium storage, thus leading to much enhanced high‐rate sodium storage capacity and stability, which has been proven by both experimental results and first‐principles simulations. Moreover, this top‐down strategy can enable new paths to the low‐cost and high‐yield synthesis of 3D graphene/metal composites for applications in energy‐related fields and beyond.     

Carbon Dots,Unconventional Preparation Strategies,and Applications Beyond Photoluminescence

Carbon dots (C‐dots) are generally separated into graphene quantum dots (GQDs) and carbon nanodots (CNDs) based on their respective top‐down and bottom‐up preparation processes. However, GQDs can be prepared by carbonization of small‐molecule precursors as revealed with unconventional preparation strategies. Thus, it is their structures rather than their precursors and preparation strategy that govern whether C‐dots are GQDs or CNDs. Here, the composites, structure, and electronic properties of C‐dots are discussed. C‐dots generally consist of a graphite‐like core and amorphous oxygen‐containing shell. When graphite becomes C‐dots, its conduction and valence bands are separated, and the quantum confinement effect appears. Combined with the light‐harvesting ability inherited from graphite, electrons in the core of C‐dots are transferred from conduction to valence bands, leading to electron–hole pair formation upon light excitation. The photoexcitation activities, such as photovoltaic conversion, photocatalysis, and photodynamic therapy, are influenced by the electronic properties of the core. Different to the semiconductor properties of core, the C‐dot shell is electrochemically active, leading to electrochemiluminescence (ECL). The oxygen‐containing groups in shell can conjugate to functional species for use in imaging and therapy. The applications of C‐dots beyond photoluminescence, including ECL, solar photovoltaics, photocatalysis, and theranostics, are reviewed.     

Controlled Electrodeposition of Gold on Graphene: Maximization of the Defect‐Enhanced Raman Scattering Response

A reliable method to prepare a surface‐enhanced Raman scattering (SERS) active substrate is developed herein, by electrodeposition of gold nanoparticles (Au NPs) on defect‐engineered, large area chemical vapour deposition graphene (GR). A plasma treatment strategy is used in order to engineer the structural defects on the basal plane of large area single‐layer graphene. This defect‐engineered Au functionalized GR, offers reproducible SERS signals over the large area GR surface. The Raman data, along with X‐ray photoelectron spectroscopy and analysis of the water contact angle are used to rationalize the functionalization of the graphene layer. It is found that Au NPs functionalization of the “defect‐engineered” graphene substrates permits detection of concentrations as low as 10^?16 m for the probe molecule Rhodamine B, which offers an outstanding molecular sensing ability. Interestingly, a Raman signal enhancement of up to ≈10⁸ is achieved. Moreover, it is observed that GR effectively quenches the fluorescence background from the Au NPs and molecules due to the strong resonance energy transfer between Au NPs and GR. The results presented offer significant direction for the design and fabrication of ultra‐sensitive SERS platforms, and also open up possibilities for novel applications of defect engineered graphene in biosensors, catalysis, and optoelectronic devices.     

Electrostatic Assembly Guided Synthesis of Highly Luminescent Carbon‐Nanodots@BaSO4 Hybrid Phosphors with Improved Stability

Carbon nanodots (CNDs)@BaSO₄ hybrid phosphors are fabricated in an easy and low‐cost process by sequentially assembling Ba²⁺ and SO₄^2? ions onto the surface of carbon nanodots through electrostatic attraction. CNDs act as the nucleus to attract these reactive ions and provide the luminescent centers in the hybrid phosphors. This strategy is versatile for a variety of negatively charged CNDs with different emission colors. The advantage of the resultant hybrid phosphors is that their luminescence exhibits excellent thermal and photostability, as well as remarkable resistance to strong acid/alkali and common organic solvents. These merits allow for the fabrication of CNDs‐based light‐emitting diodes using the CNDs@BaSO₄ hybrid phosphors as a color conversion layer.     

A High‐Performance Lithium‐Ion Capacitor Based on 2D Nanosheet Materials

Lithium‐ion capacitors (LICs) are promising electrical energy storage systems for mid‐to‐large‐scale applications due to the high energy and large power output without sacrificing long cycle stability. However, due to the different energy storage mechanisms between anode and cathode, the energy densities of LICs often degrade noticeably at high power density, because of the sluggish kinetics limitation at the battery‐type anode side. Herein, a high‐performance LIC by well‐defined ZnMn₂O₄‐graphene hybrid nanosheets anode and N‐doped carbon nanosheets cathode is presented. The 2D nanomaterials offer high specific surface areas in favor of a fast ion transport and storage with shortened ion diffusion length, enabling fast charge and discharge. The fabricated LIC delivers a high specific energy of 202.8 Wh kg^?1 at specific power of 180 W kg^?1, and the specific energy remains 98 Wh kg^?1 even when the specific power achieves as high as 21 kW kg^?1.     

缺陷调控石墨烯复合催化剂在氧还原反应中的作用

电化学氧还原反应(ORR)在能源、催化等领域具有广阔的应用前景, 因此开发性能优异、选择性高的催化剂对于促进ORR发展具有重要意义。ORR反应按照反应过程可以分为二电子反应过程和四电子反应过程。本研究以化学修饰石墨烯为原料, 通过调控其表面缺陷并与银-对苯二琨二甲烷(Ag-TCNQ)纳米点复合, 合成了不同缺陷程度的复合催化剂, 在此基础上比较了Ag-TCNQ/高缺陷石墨烯和Ag-TCNQ/低缺陷石墨烯的ORR性能。研究结果显示Ag-TCNQ/高缺陷石墨烯催化ORR的电子转移数为2.4, 双氧水产率达0.62 mg/h, 法拉第效率为64.45%。相比之下, Ag-TCNQ/低缺陷石墨烯参与ORR的电子转移数为3.7, 氧还原半波电位约为0.7 V(vs. RHE)。因此, 高缺陷催化剂促进ORR的二电子过程, 而低缺陷的催化剂促进ORR的四电子过程。在复合材料中, Ag-TCNQ纳米颗粒和石墨烯发挥了各自的结构优势, 形成复合效应, 共同提高了催化活性。     

3D Graphene Networks Encapsulated with Ultrathin SnS Nanosheets@Hollow Mesoporous Carbon Spheres Nanocomposite with Pseudocapacitance‐Enhanced Lithium and Sodium Storage Kinetics

The lithium and sodium storage performances of SnS anode often undergo rapid capacity decay and poor rate capability owing to its huge volume fluctuation and structural instability upon the repeated charge/discharge processes. Herein, a novel and versatile method is described for in situ synthesis of ultrathin SnS nanosheets inside and outside hollow mesoporous carbon spheres crosslinked reduced graphene oxide networks. Thus, 3D honeycomb‐like network architecture is formed. Systematic electrochemical studies manifest that this nanocomposite as anode material for lithium‐ion batteries delivers a high charge capacity of 1027 mAh g^?1 at 0.2 A g^?1 after 100 cycles. Meanwhile, the as‐developed nanocomposite still retains a charge capacity of 524 mAh g^?1 at 0.1 A g^?1 after 100 cycles for sodium‐ion batteries. In addition, the electrochemical kinetics analysis verifies the basic principles of enhanced rate capacity. The appealing electrochemical performance for both lithium‐ion batteries and sodium‐ion batteries can be mainly related to the porous 3D interconnected architecture, in which the nanoscale SnS nanosheets not only offer decreased ion diffusion pathways and fast Li⁺/Na⁺ transport kinetics, but also the 3D interconnected conductive networks constructed from the hollow mesoporous carbon spheres and reduced graphene oxide enhance the conductivity and ensure the structural integrity.     

Hybrid Films of Graphene and Carbon Nanotubes for High Performance Chemical and Temperature Sensing Applications

A hybrid composite material of graphene and carbon nanotube (CNT) for high performance chemical and temperature sensors is reported. Integration of 1D and 2D carbon materials into hybrid carbon composites is achieved by coupling graphene and CNT through poly(ionic liquid) (PIL) mediated‐hybridization. The resulting CNT/PIL/graphene hybrid materials are explored as active materials in chemical and temperature sensors. For chemical sensing application, the hybrid composite is integrated into a chemo‐resistive sensor to detect a general class of volatile organic compounds. Compared with the graphene‐only devices, the hybrid film device showed an improved performance with high sensitivity at ppm level, low detection limit, and fast signal response/recovery. To further demonstrate the potential of the hybrid films, a temperature sensor is fabricated. The CNT/PIL/graphene hybrid materials are highly responsive to small temperature gradient with fast response, high sensitivity, and stability, which may offer a new platform for the thermoelectric temperature sensors.     

Electrical and optical properties of reduced graphene oxide and multi-walled carbon nanotubes based nanocomposites: A comparative study

Graphene and multi-walled carbon nanotubes have attracted interest for a number of potential applications. One of the most actively pursued applications uses graphene and carbon nanotubes as a transparent conducting electrode in solar cells, displays or touch screens. In this work, in situ reduced graphene oxide/Poly (vinyl alcohol) and multi-walled carbon nanotubes/Sodium Dodecyl Sulfate/Poly (vinyl alcohol) composites were prepared by water dispersion and different reduction treatments. Comparative studies were conducted to explore the electrical and optical properties of nanocomposites based on graphene and multi-walled carbon nanotubes. A thermal reduction of graphene oxide was more effective, producing films with sheet resistances as low as 10²–10³ Ω/square with 80% transmittance for 550 nm light. The percolation threshold of the thermally reduced graphene oxide composites (0.35 vol%) was much lower than that of the chemically reduced graphene oxide composites (0.57 vol%), and than that of the carbon nanotubes composites (0.47 vol%). The Seebeck coefficient of graphene oxide films changes from about 40 μV/K to −30 μV/K after an annealing of three hours at 200 °C. The optical absorption of the nanocomposites showed a high absorbance in near UV regions and the photoluminescence enhancement was achieved at 1 wt% graphene loading, while the carbon nanotubes based composite presents a significant emission at 0.7 wt% followed with a photoluminescence quenching at higher fraction of the nanofillers 1.6 wt% TRGO and 1 wt% MWCNTs.     

Asymmetric 3D Elastic–Plastic Strain‐Modulated Electron Energy Structure in Monolayer Graphene by Laser Shocking

Graphene has a great potential to replace silicon in prospective semiconductor industries due to its outstanding electronic and transport properties; nonetheless, its lack of energy bandgap is a substantial limitation for practical applications. To date, straining graphene to break its lattice symmetry is perhaps the most efficient approach toward realizing bandgap tunability in graphene. However, due to the weak lattice deformation induced by uniaxial or in‐plane shear strain, most strained graphene studies have yielded bandgaps <1 eV. In this work, a modulated inhomogeneous local asymmetric elastic–plastic straining is reported that utilizes GPa‐level laser shocking at a high strain rate (dε/dt) ≈ 10⁶–10⁷ s^?1, with excellent formability, inducing tunable bandgaps in graphene of up to 2.1 eV, as determined by scanning tunneling spectroscopy. High‐resolution imaging and Raman spectroscopy reveal strain‐induced modifications to the atomic and electronic structure in graphene and first‐principles simulations predict the measured bandgap openings. Laser shock modulation of semimetallic graphene to a semiconducting material with controllable bandgap has the potential to benefit the electronic and optoelectronic industries.     

Graphene‐Encapsulated FeS2 in Carbon Fibers as High Reversible Anodes for Na+/K+ Batteries in a Wide Temperature Range

Developing low cost, long life, and high capacity rechargeable batteries is a critical factor towards developing next‐generation energy storage devices for practical applications. Therefore, a simple method to prepare graphene‐coated FeS₂ embedded in carbon nanofibers is employed; the double protection from graphene coating and carbon fibers ensures high reversibility of FeS₂ during sodiation/desodiation and improved conductivity, resulting in high rate capacity and long‐term life for Na⁺ (305.5 mAh g^?1 at 3 A g^?1 after 2450 cycles) and K⁺ (120 mAh g^?1 at 1 A g^?1 after 680 cycles) storage at room temperature. Benefitting from the enhanced conductivity and protection on graphene‐encapsulated FeS₂ nanoparticles, the composites exhibit excellent electrochemical performance under low temperature (0 and ?20 °C), and temperature tolerance with stable capacity as sodium‐ion half‐cells. The Na‐ion full‐cells based on the above composites and Na₃V₂(PO₄)₃ can afford reversible capacity of 95 mAh g^?1 at room temperature. Furthermore, the full‐cells deliver promising discharge capacity (50 mAh g^?1 at 0 °C, 43 mAh g^?1 at ?20 °C) and high energy density at low temperatures. Density functional theory calculations imply that graphene coating can effectively decrease the Na⁺ diffusion barrier between FeS₂ and graphene heterointerface and promote the reversibility of Na⁺ storage in FeS₂, resulting in advanced Na⁺ storage properties.     

H2O‐Etchant‐Promoted Synthesis of High‐Quality Graphene on Glass and Its Application in See‐Through Thermochromic Displays

Direct growth of graphene on glass can bring an innovative revolution by coupling the complementary properties of traditional glass and modern graphene (such as transparency and conductivity), offering brand new daily‐life related applications. However, preparation of high‐quality graphene on nonmetallic glass is still challenging. Herein, the direct route of low sheet resistance graphene on glass is reported by using in situ‐introduced water as a mild etchant and methane as a carbon precursor via chemical vapor deposition. The derived graphene features with large domain sizes and few amorphous carbon impurities. Intriguingly, the sheet resistance of graphene on glass is dramatically lowered down to ≈1170 Ω sq^?1 at the optical transmittance ≈93%, ≈20% of that derived without the water etchant. Based on the highly conductive and optical transparent graphene on glass, a see‐through thermochromic display is thus fabricated with transparent graphene glass as a heater. This work can motivate further investigations of the direct synthesis of high‐quality graphene on functional glass and its versatile applications in transparent electronic devices or displays.     

Stacking‐Controlled Assembly of Cabbage‐Like Graphene Microsphere for Charge Storage Applications

Nanostructured graphene electrodes generally have a low density, which can limit the volumetric performance for energy storage devices. The liquid‐phase mild reduction process of graphene oxide sheets is combined with the continuous aerosol densification process to produce high‐density graphene agglomerates in the form of microspheres. The produced graphene assembly shows the cabbage‐like morphology with a high density of 0.75 g cm^?3. In spite of such high density, the cabbage‐like graphene microspheres have narrow‐ranged mesopores and a high surface area. The cabbage‐like graphene microsphere exhibits both high gravimetric and volumetric energy densities due to the optimized microstructure, which shows a high gravimetric capacitance of 177 F g^?1 and volumetric capacitance of 117 F cm^?3 in supercapacitors. As a cathode for lithium‐ion capacitors, the cabbage‐like graphene delivers a reversible capacity of ≈176 mAh g^?1. The stacking‐control approach provides a new pathway to control the microstructure of the graphene assembly and corresponding charge storage characteristics for energy storage applications.     

选区激光熔化石墨烯增强金属基复合材料研究进展

石墨烯拥有不同于传统材料的特殊性能,如优异的结构力学性能以及导热性能,自被发现以来即获得广泛的关注,其中一个重要应用是作为增强相来增强金属基材料,从而获得高性能的结构和功能复合材料。近年来为了满足复合材料性能优化及结构精密复杂的需求,对其制造方法提出了更高的要求。选区激光熔化(Selective Laser Melting, SLM)作为增材制造技术的一种,避免了传统制造技术成本高、周期长、精度低等问题,可更加灵活地实现功能-结构-材料一体化。本文总结了SLM制备石墨烯及其增强金属基(铝、镍、钛、铁、铜)复合材料的应用研究与发展现状,讨论了石墨烯增强金属基复合材料所面临的主要问题,并展望了石墨烯增强金属基复合材料的应用与发展前景。     

Defect Engineering of Chalcogen‐Tailored Oxygen Electrocatalysts for Rechargeable Quasi‐Solid‐State Zinc–Air Batteries

A critical bottleneck limiting the performance of rechargeable zinc–air batteries lies in the inefficient bifunctional electrocatalysts for the oxygen reduction and evolution reactions at the air electrodes. Hybridizing transition‐metal oxides with functional graphene materials has shown great advantages due to their catalytic synergism. However, both the mediocre catalytic activity of metal oxides and the restricted 2D mass/charge transfer of graphene render these hybrid catalysts inefficient. Here, an effective strategy combining anion substitution, defect engineering, and the dopant effect to address the above two critical issues is shown. This strategy is demonstrated on a hybrid catalyst consisting of sulfur‐deficient cobalt oxysulfide single crystals and nitrogen‐doped graphene nanomeshes (CoO_0.87S_0.13/GN). The defect chemistries of both oxygen‐vacancy‐rich, nonstoichiometric cobalt oxysulfides and edge‐nitrogen‐rich graphene nanomeshes lead to a remarkable improvement in electrocatalytic performance, where CoO_0.87S_0.13/GN exhibits strongly comparable catalytic activity to and much better stability than the best‐known benchmark noble‐metal catalysts. In application to quasi‐solid‐state zinc–air batteries, CoO_0.87S_0.13/GN as a freestanding catalyst assembly benefits from both structural integrity and enhanced charge transfer to achieve efficient and very stable cycling operation over 300 cycles with a low discharge–charge voltage gap of 0.77 V at 20 mA cm^?2 under ambient conditions.     

Low‐Temperature and Rapid Growth of Large Single‐Crystalline Graphene with Ethane

Future applications of graphene rely highly on the production of large‐area high‐quality graphene, especially large single‐crystalline graphene, due to the reduction of defects caused by grain boundaries. However, current large single‐crystalline graphene growing methodologies are suffering from low growth rate and as a result, industrial graphene production is always confronted by high energy consumption, which is primarily caused by high growth temperature and long growth time. Herein, a new growth condition achieved via ethane being the carbon feedstock to achieve low‐temperature yet rapid growth of large single‐crystalline graphene is reported. Ethane condition gives a growth rate about four times faster than methane, achieving about 420 µm min^?1 for the growth of sub‐centimeter graphene single crystals at temperature about 1000 °C. In addition, the temperature threshold to obtain graphene using ethane can be reduced to 750 °C, lower than the general growth temperature threshold (about 1000 °C) with methane on copper foil. Meanwhile ethane always keeps higher graphene growth rate than methane under the same growth temperature. This study demonstrates that ethane is indeed a potential carbon source for efficient growth of large single‐crystalline graphene, thus paves the way for graphene in high‐end electronical and optoelectronical applications.     

Worm‐Shape Pt Nanocrystals Grown on Nitrogen‐Doped Low‐Defect Graphene Sheets: Highly Efficient Electrocatalysts for Methanol Oxidation Reaction

Although direct methanol fuel cell offers high energy use efficiency and low pollution emission, the lack of suitable electrode materials poses a great challenge to its commercial application. Herein, a facile and scalable approach is developed to fabricate a hybrid electrocatalyst consisting of strongly coupled worm‐shape Pt nanocrystals and nitrogen‐doped low‐defect graphene (N‐LDG) sheets. Interestingly, it is found that the formation of Pt nanoworms (NWs) is induced by the N atoms in the high‐quality carbon matrix, which also allows the integration of their respective structural advantages and leads to a strong synergetic coupling effect. As a result, the obtained Pt NW/N‐LDG catalyst exhibits an extremely high mass activity of 1283.1 mA mg^?1 toward methanol oxidation reaction, accompanied by reliable long‐term stability and good antipoisoning ability, which are dramatically enhanced as compared with conventional Pt nanoparticle catalysts dispersed on undoped LDG, reduced graphene oxide, and commercial carbon black supports.